I installed Ubuntu on two seperate boxes and one of them switched itself to a higher screen resolution than the other somehow. I prefer the newer screen resolution but don't know how to switch the other box to that resolution.
View 3 Replies
I have fedora 12 and I tried to change the screen resolution under the system menu to a higher one and it changed but now I dont have any menus and I'm not sure if I can use quick keys to go back to the display preferences to reset the screen resolution. Is there anyway I could run the display preferences by running a command in the bash shell or is there a quick key that allows menu access.
View 3 Replies View RelatedI am having a major problem in a new Karmic install. Big rationalisation. Kicked out a lot of machines in favour of Virtual machines. Installed Karmic. Machine has dual 22" wide screen monitors, max res 1680 x 1050. Karmic installed at maximum 800 x 600 and will not go above that. I have looked for xorg.conf and cannot find one anywhere. I have tried the randr as shown by Sharaq but when I try to set the higher resolution it gives message saying maximum size is 800 x 600. I have downloaded the proprietory drivers from Radeon and tried to run them. The installer runs but I cannot get to the 'Continue' button because it is off the bottom of my screen so I cannot set up the drivers. I suspect I am going to have the same problem with the Lucid install I did yesterday. Earlier releases never gave me this issue so why now?
Why is the initial resolution so low?
I have been on Ubuntu for a total of about 1 hour now, as I have finally made the switch from Windows. So far so good, but I do have some learning to do. First off, when I got Ubuntu 10.04 installed, everything worked great! Video lagged a little however. No biggy. The next time I booted up, it asked if I wanted to install video card drivers. I thought this is why my video was lagging, so I said yes. It then automatically installed my nvidia card drivers.
Then when I rebooted, I was greeted with a 640x480 screen resolution. When I go to System->Preferences->Monitors, I am given a warning that says: "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics drivers vendor's tool instead?"
Regardless if I hit "yes" or "no" I am brought to windows that should allow me to change resolutions. However, the only resolutions I can choose are 640x480 and 320x240. I know my "monitor" can support higher resolutions as I was running it at higher resolutions before the switch to Ubuntu. (I put monitor in quotes, as I am using a large rear projection T.V. as my monitor). How I can get a higher resolution?
am just coming from a clean install of Lucid Server x64 on a desktop configuration. No problems really but for one.With no GUI installed -something I wish to remain as is- I am having difficulties browsing through bash due to low resolution. So the question is: "how can I go to a higher screen resolution?"
View 8 Replies View RelatedI'd like a distribution with KDE.
I've tried Kubuntu, but I don't get any higher screen resolution than 640*480. The graphics adapter that seems to get me in trouble is an Intel based one.
I'm open to other OS'es that uses KDE -I just need to be able to use Kdenlive.
I have a problem with the screen resolution in that most of the time it defaults to 800 x 600. However on occasions when I switch on the resolution increases however just today when it happened after typing in my password it refused to log me in.
Before anyone asks my password is in lower case and the NUMLOCK is off and I know I'm not mis-typing it.
here's the strange bit, when I reset the computer and the resolution goes back to 800 x 600 it then accepts my password. go figure!
I have what I think is a pretty eay question. I'm trying to set the screen resolution of my new 10.10 installation to 1920x1080. The monitor only supports up to 1024x768, but i would like more area. I've done this before but I forgot how i did it. In the end the screen spilled off to the sides and when I ran my cursor over to that section it would disply it. I have a feeling that i need to edit my xorg.conf file, but my nvidia drive has some new mode types and i figured I'd ask before making random changes.
below is my xorg.conf file.
UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
[Code]...
I recently installed Ubuntu 10.04 in my computer, I ran update manager and installed all the actualization but and I can not set the screen resolution higher than 800x600; I have windows XP installed in another partition and the screen resolution can get to 1028x1024 at 85 hz. I have a Pentium 4, 2.20 ghz, 1gb ram, and the video card is a SiS (Silicone Integrated Systems) 300/305/630/540/730 32 Mb.
View 4 Replies View RelatedI installed wheezy on a new pc, and I have only two resolution modes:
1024X768
800x600
what do I have to do to get hight resolution?
lspci:
root@debian ~ # lspci -v -s `lspci | awk '/VGA/{print $1}'`
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device 11d7
Flags: bus master, fast devsel, latency 0, IRQ 44
[Code] .....
Im running fedora 11. I pressed the desktop effects button yesterday, and it suddenly changed my resolution to 800x600 when it was previously a lot higher. I couldn't fix it, so i reinstalled fedora 11. Couldn't fix it. Reinstalled Windows XP, then reinstalled fedora 11, and it fixed. Now, 12 hours on, it has gone back to 800x600. How can i fix this?!
View 4 Replies View RelatedI've just installed Fedora 14 on my DELL inspiron mini 1018. Installed the latest updates (including the latest kernel). Everything works fine except the screen resolution cannot be set to higher than 1024x600. The driver is Intel NM10
I googles the topic and found many forums that guides throgh the xorg.conf file (had to create one) but with no luck.
I have a Fujitsu-Siemens V5535 laptop with a SIS Mirage 3+ graphic card, 671/672 chipset. I put ubuntu 9.10 on it, but I am not even able to settle the screen resolution higher than 800/600 . I tried different sollutions that i have found on the linux forum, but I was not successful.
View 1 Replies View RelatedI'm a little surprised that I haven't seen any other complaints about their MacBook only going up to a resolution of 1280x800. Does anyone have a configuration for higher resolutions or have any insight into how it might be possible to obtain them? It works in Mac OS X, so it should certainly work in Linux.
View 2 Replies View RelatedUbuntu 10.04. I have fglrx driver installed.. It appears when i set the resolution to anything higher than 1024x768... the login screen background is messed up to
View 2 Replies View RelatedI've recently been messing with installing Fedora 14 an older computer I have and I've hit a snag. While everything else seems to be just honky dory, I cant get the screen resolution to go higher than 848x480. I know that the screen I'm using supports at least 1024x768 (possibly higher, i don't know) as another computer I have will display at that on it with no problem.
I've spent literally hours mucking about with xrandr, and xorg.conf (had to create it cause it didn't exist)As an addendum: the GUI monitor preferences screen says "Unknown" for the monitor I'm using, where as the xorg.conf file i created accurately detects it as Vendor "NEC" ModelName "PX-50VP" That's not really a big deal though, just a minor quirk I would think.
Recently I have acquired 2-port KVM switch. When the monitor is connected through this KVM in Windows 7 resolution is properly detected - 1280x1024. When I go under Linux (openSUSE 11.4 with KDE, nVidia 260.19.44) there is a problem with the resolution. In the screen settings does not appear a resolution higher than 1024x768. How do I set the desired resolution in Linux?
View 4 Replies View RelatedI have done a fresh install of Ubuntu 11.04 on my oem intel machine.After the installation,the screen resolution is stuck at 800x600.I am unable to select a higher screen resolution.
View 6 Replies View RelatedThis is my first posting as a Linux Newbie. I have installed Ubuntu 10.04 inside of a MS Virtual PC on my Vista machine. Everything seems to work beautifully and is stable. However, I would like to use a resolution higher than the current maximum of 800x600. I've poked around on the web and have tried various tips. I tried using the xrandr options which added a higher resolution mode, but when I would try to set the output to that resolution, I would get an error message to the effect that I could not exceed the current maximum of 800x600.
I tried to cobble parameter values together and create an xorg.conf file, but every iteration seems to produce a bunch of colorful vertical bars within my Virtual PC window, and I would have to blow away that virtual PC setup and rebuild it (along with reinstalling Ubuntu). As I said, 800x600 is not a show stopper, but I would like to take advantage of the real estate I have with my display. These "fifty-five year old" eyes could benefit from the larger size. FYI, I did take a stab at installing Virtual Box, but got the infamous "blue screen", so I would rather stick with what appears to be a stable virtual PC base.
I have a KVM (Keyboard, Video, Mouse) switch which is stopping Ubuntu 9.10 from getting the EDID information from the monitor on startup.The resolution at startup is 800x600 and lower resolutions are available but nothing higher.I have plugged the monitor directly into the computer and the screen is OK and gives all the resolutions available from the monitor.I got the EDID information from the monitor when it was plugged directly into the computer using "sudo get-edid". Then I put this information into the Xorg.conf file and did a restart with the KVM switch in place.
However the screen resolution was back at 800x600 with nothing higher available.The xorg.conf file still has the information from the "edid" request so it has not reverted to the old file.I understand that 9.10 does not have an xorg.conf file but I upgraded from 8.?? to 9.10 and I think that it came from there originally.The question is how can I get/force 9.10 to read and use the information from the xorg.conf file so that I can get the resolution I want?Or is there another way?I tried to pipe the output of edid into a file whilst logged in as root :
Code: [sudo get-edid > /etc/X11/edidinfo.edid
bash: /etc/X11/edidinfo.edid: Permission denied][ So that I could refer to it in the xorg.conf file - Why was permission denied?
I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies View RelatedMy Ubuntu can not go any higher then 640x480. I have found out what the problem is. The monitor has broken down (firmware or some thing) but still works fine in Windows. How do i know this ? Well a few mouths ago i was on Windows Me and one day it booted up saying that it is installing a default driver for the screen , so i let it do and after it did that it would never use the VA702 driver. Also the resolution could get higher then 1280x1024(this is the screens biggest res). A other mouth later i installed Windows XP and when using it i tried to install the VA702 driver but it did not work so i had to manually install it which worked but did not get correct resolutions e.g. could go higher than the monitor is meant to go. Now in Ubuntu can't go higher then 640x480. How can i fix this ?
Screen : ViewSonic VA702
Graphics Card : Winfast My Vivo A170 Geforce 4 MX 440 AGP 4x 64MB DDR
Ubuntu:9.10
I'm trying to make get a higher resolution when I use Ctrl+Alt+F2, I've looked up in other forums but apparently 9.10 changed its methods to fixing your desired resolution. I've tried other ways of changing it but I get an error when I boot in to the system, I have Ubuntu 9.10 64-bit, a GeForce 8800m GTS, the highest my screen can go is 1440x900.
View 9 Replies View RelatedResolution won't go higher than 640x480 with a TV
View 1 Replies View RelatedI have just done a clean install of 10.04 and cannot for the life of me set the resolution higher then 800x600 When I go to change the resolution I am greeted with a unknown monitor.
lspci | grep -i vga
VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 01)
Here is the Xorg config file I have configured
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
[Code].....
I've changed my operating system from Vista to Linux Ubuntu 10.10. Now I stand in front of the problem to change the screen resolution. The current resolution is 800x600.How can I change to a higher resolution?
View 7 Replies View RelatedI have installed Ubuntu 10.10 as a virtual machine under my Win7 windows. Everything is OK except that I can not get resolution higher than 800*600. Actually there are two options in Display Settings Menu 800*600 and 640*480. But my laptop has 15.4 inch monitor so its normal resolution is 1280*800.
View 3 Replies View RelatedI have a FX 5200 and a 26" TV with VGA input which supports 1330x760. No problem with this in Windows, but in Ubuntu, as soon as I install nvidia drivers (175) resolution goes 640x480.
I've tried editing xorg.conf in several different ways, but resolution didn't change, maybe I was doing it the wrong way.
PD: 10.04 Lucid Lynx fresh install
I'm looking for advice on which is the best video card to get for Ubuntu 11.4. At the moment I have an INTEL SERIES 4 INTEGRATED GRAPHICS CONTROLLER and I can only get it recognized as a "VGA COMPATIBLE" Due to my eyesight I need to have the resolution smaller something like 1168 x 752 I dont need to be be able to play games or anything like that. Just typing, videos and general PC work. OR if anyone could point me in the direction of installing better drivers for my INTEL card as I know Windows XP can give me resolutions of this depth.
View 2 Replies View RelatedI installed Debian 8 Jessie with the GNOME 3 desktop environment and I couldn't get pass the login screen after several reboots. Since I read that NVIDIA graphics are problematic, I decided to reinstall the system but selected Mate desktop, which appears to be less graphic intensive than GNOME 3. It worked. However, I can't get a higher resolution than 1024x768 (In Windows I could). The Mate settings in the "System → Preferences → Monitors" does not show higher resolutions.
The information of the graphics card is this:
Code: Select all00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] [10de:03d0] (rev a2)
Before I try to install proprietary drivers as instructed in [URL] ...., I'd like to see if there's anything to try first with the default stuff installed by the system, because that page says:
As of jessie, the need for the proprietary drivers is pretty much over - nouveau now works quite well and works with dual-headed displays by simple and easy configuring from within your desktop(for KDE see System_Settings/Hardware/Display_and_Monitor/Display_Configuration) . The proprietary drivers don't provide normal logging and can be a hidden source of problems.
