I have a asterisk server running on my ubuntu 10.10 server box. I also have a zabbix server monitoring my networks. Asterisk have the possibility to show very interesting statistic with SNMP. But I cannot managed to set it up. This is the result i get when I try to get the version information with snmpwalk:
[Code]...
I have been trying to set up SNMP monitoring using Cricket. I believe I have Cricket running fine, however I also believe that I have SNMP set up wrong. When I do an SNMPWALK I get the following:
[Code]....
This tells me I have SNMP running, however I would expect to see a lot more data... Am I correct, should I see more data? I spoke to a friend, and he suggested that I have something not set up correctly in SNMP dealing with the community string...
I have installed PRTG Traffic grafer on Windows machin, How can enable snmp in redhat 5.3 enterprize for monitoring through prtg.
View 1 Replies View RelatedCan any one tell me a network monitoring tool which can monitor remote connectivity and generate a comprehensive report about the link state like up/down, error timings, increase in latency and packet loss rate.
View 3 Replies View RelatedI am using MySQL version 5.1.47 (64bit) on Centos 5.5 in production environment. I am exploring option to monitor MySQL though SNMP traps. Can anybody please let me know if there is any open source SNMP tool that can be used for MySQL monitoring?
View 4 Replies View RelatedI have been ask to provide a network monitoring utility that can create network benchmarks for applications to graphically see how it performs.
View 6 Replies View Relatedour 9.x servers are running perfect. Just setup 5 new webservers, running 10.04LTS. Have SNMPD running, installed and the same config for all the servers I just copied over, by config, I mean one line, that's it. So the servers have the following /etc/snmp/snmpd.conf file rocommunity public
That's it. Now the only difference is looking at the ps on the local box's, a working one shows;
snmp 1096 0.0 0.0 50480 3756 ? S Jul02 9:21 /usr/sbin/snmpd -Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid
where this one shows
snmp 4962 0.3 0.0 48540 5884 ? S 22:26 0:04 /usr/sbin/snmpd -Lsd -Lf /dev/null -u snmp -g snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1
Notice (I did flag it red) the local 127.0.0.1, but that co-incides with my
[Code]....
It almost seems something firewall is blocking, apparmor is not running, is there something else out of the box 10.04 has that I am just completly brain farting on?
I'm trying to configure SNMP service to send traps to SNMP server. I've installed net-snmp-utils, now I need to configure the "snmpd.conf" file...
View 2 Replies View Relatedfinnaly i can run my ubuntu server 9.04 well, thnx to this great member of ubuntuforums.org now, i wanna i wannna install SNMP on my system, but after i do that, when i wanna connect with another client, it give me error like this :
Code:
no response received
SNMPv1_Session (remote host: "10.100.7.179" [10.100.7.179].161)
community: "public"
request ID: 862383236
PDU bufsize: 8000 bytes
[Code]...
10.100.7.179 is my client, i allready install snmp agent on it. but why still eror then? plz give some help. thnx before
I have a small problem with lmsensors and snmp since I upgraded my small server from 9.10 to 10.04. I use cacti to monitor my servers usage, disk space as well as temps and fans.
This was running very fine before the upgrade, but now I don't get data anymore from lmsensors. It seems that SNMP doesn't give this information as before. (Cacti log says: "No sensor data was returned from SNMP")
sensors give the following output:
Code:
w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.12 V (min = +0.00 V, max = +1.74 V)
AVCC: +3.41 V (min = +2.98 V, max = +3.63 V)
[code]....
I switched on bandwidth monitoring on my Ubuntu Server via Webmin on interface eth1. Unfortunately this has filled my disk by writing huge syslog, debug and kernel.log files. How do I switch it off? I can't see a way of doing it in Webmin.
View 1 Replies View RelatedI have been running a webserver for a time now. And for fun I thought I would use Nagios for monitoring it. But the installation instruction says install this on webserver01 and that on webserver02. I only have one server and want to monitor it remotely from a simple browser. Is this possible or does Nagios need at least two separate servers? Can't it just run it on my one server?
View 1 Replies View Relatedmy servers are configured with:Ubuntu 10.10 server 64bit;Lighttpd MySQL-Server I need to make graphs for traffic (bandwidth usage) and cpu load every month. I tried to configure mrtg but after 48h, it didn't produce graphs.(I can't install apache2)
[Code]...
i was wondering if any of you knew of any server application software as shown here:URL...
View 3 Replies View RelatedI didn't setup our old system but that server has since been retired due to hardware failure, but we have some new webervers, and a new postgtres database server in place which I need monitoring. Some items include database size, transactions per second, io stats, memory monitoring, or as the DBA put "anything I can get". We had used CACTI in the past for these items, but I didn't do the setup and sondering if that is what is recommended, or something else. I am looking at groundwork open source which include nagios, etc. but figured I would consult the uforums since all these servers are running userver 9.x and 10.x .
View 3 Replies View RelatedAnybody know of a good server health/status/performance monitoring apps? I have only used cacti never really tried anything else.
View 9 Replies View RelatedIt is vital to get a useful server performance monitoring tool that prevents growth related performance issues. Moreover, it should offer long term capacity planning and trend analysis along with detecting performance issues and unwanted outages.
View 3 Replies View RelatedI really think that Ubuntu Server should by default have SMART monitoring enabled, and possibly prompt for a notification e-mail address (and SMTP server details if required) for SMART notifications to be sent to.
View 1 Replies View RelatedI am looking for some monitoring tools (such as disk usage,memory usage, cpu,etc) for my linux machines. I came across two tools, cacti and splunk.Which one is better ? It will be nice if you can also let me know the reason.
View 8 Replies View RelatedI'm looking for some sort of a way keep track of all of my users that are logging in to my server (centos 5), what I mean is this: at our firm we outsource some of our work (programing), now all of the developing is done under our servers, what I'd like to find is a way of taking all of the users log on time and display by days/weeks/months - so I could see how much did everyone had put in. Another thing that I'm looking for is a way to monitor an ongoing session and record user activity, now I've seen ObserveIT, but it doesn't support Linux agents as of today.
View 7 Replies View RelatedI'm running ASSP on Ubuntu 10.04.1 it's mostly working fine. I have one problem which has been bugging me for some time. I don't want to filter outbound mail, but if I can relay (proxy) my outbound mail through ASSP, then it can automatically add to the whitelist.
As ASSP is a proxy, I need a server to send it to once ASSP receives it. I've tried my ISP, but this failed and they weren't willing to confirm if a connection attempt was received at their end.
Current setup
Inbound
mx -> router -> ASSP -> Exchange 2003
Outbound
Exchange 2003 -> mx
I'd like to setup outbound as either
Exchange 2003 -> ASSP -> <ISP> SMTP relay
Exchange 2003 -> ASSP -> <relay running on Ubuntu eg postfix>
Can anyone help me with troubleshooting steps or a better suggestion for how I can set this up. I'd love to know why my ISP setup didn't work, but I don't know a tool for monitoring IP traffic in Ubuntu SE, in windows I use Wireshark is there any equivalent I can setup for Ubuntu or a tool I can use in windows which will show all traffic, Ubuntu and windows server are on the same netgear switch, not sure it's smart enough to copy all traffic to another port for monitoring.
My server name, salamander, is not showing up in windows networking or in the networking items on linux computers. I have checked, double checked and tried several samba settings to see if I can make it work, but to no avail. Its shares can be accessed by any computer by going directly to 10.10.1.101, salamander's fixed IP.
My workstation, bear, shows up. I edited hosts to read: "10.10.1.101 salamander"
Any machine can access the share on salamander using the ip address, but not even Bear can connect directly with the computer name.
When I go to networks in Salamander, all it views is itself and a windows network. Inside the windows network is only salamander.
Bear shows up in the list of servers, and also has samba running. Eagle and Bearcub are also ubuntu without samba and do not show up in the list either. Understandably so.
Here is my smb.conf:
Code:
[global]
workgroup = WILDLIFE
server string = %h server (Samba, Ubuntu)
security = SHARE
[Code].....
I've spent days trying to setup access properly from a public address to a monitoring server that works fine locally. Everything works from public access until I try to link to a CVS repository. The rancid CVS repository is set up as a separate server (virtualhost). It appears the referring link causes a DNS error (105: Server Not Found) when the CVS repository server is accessed from the public address. Things work fine when accessing via localhost.
Localhost link:
[URL]
Public link: (this results in 105 error caused by redirection (bold portion of link))
[URL]
Code:
Virtualhost config:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
[code]....
My Fedora router has three nic's, one for the internet, one for lan and one for the wireless network, which uses hostapd. I have set up samba in order to enable windows file sharing from wireless lan to wired lan. Using the samba documentation I have enabled the wins server and wins proxy which should allow met to browse the shares across the networks, which theoretically should do the trick but it doesn't work as expected. I can see the pc's from the other network using windows neighbourhood, but as soon as I access one of them it fails saying that "network path could not be found" or something like this. Tried using windows 7, windows xp and linux for browsing but the result is the same. As firewall I have shorewall and the samba specific ports are enabled for both networks. How to setup samba for inter-network browsing?
I have attached the global config section from smb.conf file:
Code:
[global]
server string = Samba Server
interfaces = eth1, lo, wlan0
bind interfaces only = Yes
security = SHARE
log file = /var/log/samba/%m.log
max log size = 50 .....
I am trying to configure my android phone (rooted Eris running kaossfroyo 2.2) to be used as a midi controller. Which I am having enough trouble with as it is but it has raised an annoying issue that occurred a month ago when I used the phones tethering network with my laptop. After connecting the laptop to the phones network (either tether, or an Ad-hoc network created using the network manager) I am unable to switch to other networks. In other words when I'm done with the phone-laptop connection I cannot connect my laptop to my home network! When I click on the other network connection I can see that it is attempting to connect in the upper right corner of the desktop (the network icon) but it will not make the connection.
What happens is that the network indicator will make the little circle graphic as if it is trying to connect but it never will display the other circle as green indicating that it has connected. but when I disconnect from the home network that is not connecting I will get a message underneath that will say that ad-hoc network disconnected! If I am switching from the android tether it will say Android-Tether disconnected etc. Even though when I click on network manager it shows that I am attempting to connect to the home network (labeled LIBERTY in my case) upon disconnection it shows the ad-hoc or tether connection being disconnected.
I am absolutely baffled by this! The issue persists even after deleting the ad-hoc connection from the wireless settings tab!!! I would speculate that for some reason the laptop is attempting to connect to the previous ad-hoc connection despite me wanting it to connect to LIBERTY. I am very confused and hope someone can lead me in the right direction.
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
am not able to install snmp in ubuntu, this is the code i followed from ....., "apt-get update and then apt-get install snmpd. the problem occurs is "could not resolve sg.security.com" and i cant updates using update manager.
View 4 Replies View RelatedI have installed Net-SNMP.It is binded to port udp 161I start it with the command: snmpd -Lo
when I do snmpget -v 1 -c public localhost system.sysObjectID.0on the same machine the snmpd is running on- I get a respond SNMPv2-MIB::sysObjectID.0 = OID: ccitt.1when I send same request from another machine (using SNMPc program) - I see no reaction.I used "wireshark" to monitor packets, and I see the requests sent from the other machine. I also see them get to the first machine.
I want to add a few linux server to our monitoring system (solarwinds).
We have to get this information by snmp.The items we need are:
1-In Byte Transferred on every network interface
2-Out Byte Transferred on every network interface.
3-Memory Usage
4-Memory Free
5-CPU usage
6-Free Disk space on partiotion
7-Uptime
I could not find snmp OID or names for this object to fetch.
I've got a new install of the following...
[root@big-bad-joe /]# more /etc/redhat-release
Red Hat Enterprise Linux AS release 4 (Nahant Update 7)
------------------------------------------------------------------
[code]....