How do I stop Lighttpd server from auto starting when I boot? I'm using it on my laptop for testing and I'd like to turn it on when I need it but not have it autostart.
View 1 Replieswhat the procedure is to file bugs against slackware so I will post here. The rc.lighttpd I have works but the function to check if lighttpd is running has an exception when there's no lighttpd.
View 2 Replies View RelatedI'm trying to configure lighttpd to send SCGI requests to different ports, depending on what file(s) are accessed. Is this possible? This is what I've tried, and it hasn't worked.
Code:
$HTTP["url"] == "URL1" {
scgi.server = (
"/RPC2" =>
[code]...
SCGI requests aren't sent to the correct port, regardless of what file is accessed.
I installed lighttpd to be able to view cgi files that display the status of my UPS. For the most part is has worked w/o incident i.e. until recently when the UPS battery failed on my APC backups xs 1500 lcd. I could not view the multimon.cgi file via the localhost or 127.0.0.1 url e.g.: [URL]... I'd get 404 page not found message. After checking links here and on the web, I tried: [URL]... The page is displayed. From this discovery, I'm not sure that this is a web server configuration or a network host configuration issue or what. I'm running Lucid with all updates, no mods to lighttpd except I added the mod_fastcgi line to the lighttpd.conf file
View 7 Replies View RelatedI have coldfusion installed on a guest ubuntu server in virtualbox, it is configured with apache2 & everything works great. But how do i get Coldfusion to autostart when i boot up the guest ubuntuserver ?
View 8 Replies View RelatedI installed KDE for very limited uses. However, everytime I start up, it brings me to the KDE login screen. I want to revert it back to console login. How do I go about doing that? And if possible, prevent future GUI packages from autostarting. so this seemed to work:
Code: sudo mv -f /etc/init/kdm.conf /etc/init/kdm.conf-disabled That basically renames it so it doesn't start. And if you do need to use the GUI, just run startx
How do you enable/disable the autostart of services. For example let's say I know I'm not gonna use apache and mysql for a while and don't want it to autostart anymore how do I disable it ?
And then once it is needed again how do you enable the autostart again ?
I'm trying to get wordpress to work with lighttpd and my home test server... <name>.dnsalias.org as my IP is not static... When I install wordpress ( via apt-get ) and set it up through install script like this:
bash /usr/share/doc/wordpress/examples/setup-mysql -n wordpress <name>.dnsalias.org It is accessible from outside of my network but not from local one where the sever ip is 10.0.0.200 From outside it is using correctly domain <name>.dnsalias.org but from inside when I try to use ip 10.0.0.200 from other pc on net it will not work..a s it still using <name>.dnsalias.org in all links... Also I would like to have it in <name>.dnsalias.org/wordpress as I have another test site in <name>.dnsalias.org/<test_Site> which by thee way works from inside and outside of my network.... its just wordpress ...
I have followed this guide: [URL] but its for apache... I spend whole night searching for some solution and now I'm dead tired and you are my last hope ...( ....Obi Wan Kenobi ) So does someone running wordpress in setup like I described above, if yes
How can I autostart samba on boot? I always need to open the terminal and type in sudo service smbd start
Anyone know how to autostart this?
I have an Ubuntu server installed at home, on an older machine. Unfortunately I am to far from my router to run cat5 and solve this issue. But I want to be able to have the wireless come up if the server restarts as then i could log in remotely.
View 1 Replies View RelatedI configured succesfully openvpn server, but the service won't start at boot !I thought openvpn automatically starts al the *.conf files in the /etc/openvpn folder ?on my personal laptop the service automatically starts all the .conf files in the folder. But on my server with server.conf file it won't start at boot. I have to start the service as root
View 1 Replies View RelatedCentOS 5.5, I've installed Synergy to share my keyboard/mouse and it works fine. Now I'm trying to get it to load automatically at boot.
The command is simple, "synergyc <computername>".
I've tried putting the command (see above) into rc.local I've tried putting the command in a script and referencing in in rc.local I've followed the instructions for building it into init levels (2-5) with chkconfig
Quote:chkconfig --list
synergy.sh 0:off 1:off 2:on 3:on 4:on 5:on 6:off
I've got it to the point it will run when you login by adding a line to the /etc/xdg/lxsession/Lubuntu/autostart file. Added "synergyc 111.111.1.11" and it works perfect. So the main question is, how can I add that line somewhere, somehow to start on boot and not by login?
View 1 Replies View RelatedI just installed Fedora 11 (excellent work by the Fedora team!) and got my Verizon mobile USB CDMA device working after some file modifications (easily found via searching).
I have to click the network icon in the task bar, and select "Auto Mobile Broadband (CDMA) Connection" to get it to connect though. It then shows up via "ifconfig" as ppp0 and all is good.
But how do I get this to auto-start when the system reboots? It doesn't show up in the network manager, and I'm not even sure how to use command-line to start up the CDMA connection! I only can do it via clicking that icon.
I am trying to install lighttpd into ubuntu with arm. BUT when I configure the file, it gives out an error!
[Code]....
We are able to stream the video fine from while the flv file is located in the /var/videos/flv folder. We have a second volume that we formatted and mounted as /media/data/videos/flv. We have changed the path in the lighttpd config file to match this. When we play the video we are receiving:200, Stream not found, NetStream.Play.StreamNotFound, clip" "[Clip]"/media/data/videos/flv/test.flv".
View 1 Replies View RelatedI'm running CentOS 5.2(i think). But my Lighttpd does not work. Code: /etc/init.d/lighttpd restart
Stopping lighttpd: [ OK ]
Starting lighttpd: [ OK ]
it should work. When I browse to my IP i don't see anything. I just brought a VPS, so trying to get it working
Is possible to use mod_perl with lighttpd?
View 1 Replies View RelatedI have installed lighttpd from svn as
Code:
Then I created four directories
Code:
And ls -l for following is
Code:
So permissions are correct upto here.
Then
Code:
Changed the following to
Code:
To
Code:
Then
Code:
Now I run
Code:
I can see
Code:
lighttpd is running.
Following is lighttpd.conf [url]
I created some html pages in /var/lighttpd/ in a directory called jp (which I had made).
Permissions of Document ROOT
Code:
And the directory
Code:
I was not able to see the webpages [url] but I was able to see [url] so why I could not browse the directory jp
I am getting a 404 not found error. Where as the page exists.
Yum answers that it does not contain lighttpd or lua in the repositories (base,updates,addons,extra). Where can I find a repository containing these packages or should I revert to building myself ?
View 3 Replies View RelatedIs there a big difference? Which do you prefer?
View 1 Replies View RelatedI am running CentOS 5.5 Final on my VPS and IO am using lighttpd for a webserver. I am trying to find a way to upgrade this to the latest version using Yum.I want to find a repository that will allow me to upgrade to lighttpd-1.4.26-2.el5 with the required dependencies. I would also like to do the same for LUA 5.1.4.I have found older versions of lighttpd but not the latest in an RPM / Yum installable version. I have found tarballs and binary version but I am of the understanding that I should use yum to manage my packages to keep the system neat and easy to upgrade / remove etc. in future.
Can anyone advise me as to where I can find these programs and how I would connect to the right repository to get them.
Lighttpd anti-hotlinking for images i just want these domain to link my imgages (test1.com,newtest2.cn,800keke.net,800org.com.cn),the other site will be redirect to [url].
lighttp configuration :
Code:
This configure onle effect to test1.com. no effect to (newtest3.cn,800keke.net,800org.com.cn. i still dont know why..
the questions is how to get per directory config working for lighttpd? so far from googling i've seen people trying to use conditionals to match certain rules for a vhost , but i don't think that messing around with the main config file for each directory/vhost/whatever is such a good idea.
More importantly , i'm looking for a standardized method to achieve this which would work by simple putting an htaccess-like file into a directory and do the magic. i'm not interested in maintaining apache htaccess syntax , only to get the per directory config to work regardless of the syntax used.
I am using Ubuntu 9.04Following is a startup script I am trying.
Code:
#!/bin/sh
USER=lighttpd
[code]....
I am not fully sure if this belongs more to the networking section or the software. O hope it is related to here enough.
My problem is as the topic says.
My port 80 seems to be already taken. lighttpd fails to start reporting that it cannot bind to port cause its already taken.
The error message itself:
Code:
"Starting web server: lighttpd2010-02-21 07:01:02: (network.c.345) can't bind to port: :: 80 Address already in use failed!"
I am not able to crack this by myself. Ihve tried investigating this by
Code:
lsof -i :80
netstat -ape | grep -v unix
First doesn't show anything second anything abt port 80.
Now hints I can think of. Maybe you have more experience and ideas what I can do and where should I look for the culprit.
I am using debian (unstable) and lighttpd. I even tried rebooting; it says that the port is taken already at the boot sequence (well it starts pretty much at end anyway but the system should be clean).
It seems that it started failing after a major distro update, so maybe there are some conflicts based on ipv6/v4 or something, though I have no idea what it could be. Well my hit for that is the part of error msg "bind to port: :: 80 ". This "::" looks like ipv6 naming convention. Maybe its lighttpd internal.
I have been searching in the forum and google but still not lucky enough to figure out yetI have a lighttpd server runningbecause apache consume so much CPU and memory) andqmailtoaster (just setup).Here is the configuration in cgi modules:
Code:
cgi.assign = ( ".pl" => "/usr/bin/perl",
".cgi" => "/usr/bin/perl",
[code]....
I have followed all the steps as mentioned on documentation.except automake (I am not clear as where to make automake)
I logged in as Root on a Ubuntu system
and then
Code:
cd /opt
svn checkout svn://svn.lighttpd.net/lighttpd/branches/lighttpd-1.4.x/
cd lighttpd-1.4.x
./autogen.sh
./configure
make
make install
After this what do I need to do to be able to start the lighttpd ?After this I did not found any script /etc/init.d/lighttpd. so what more has to be done ?
I have an Ubuntu server running with lighttpd.
The file, access.log has utilized 73GB at: logs/lighttpd/, which contains data since 3 to 4 years (approx.)
So, i need to have only last 6 months logs in the file and the rest to be cleared.
For the 1st domain,say domain1. I name the index file as:
[code]...
3 identical files. It works seamlessly. On browser its webpage can be evoked. Now I add another domain, say domain2. How shall I name its index files?
[code]...