I'm trying to configure lighttpd to send SCGI requests to different ports, depending on what file(s) are accessed. Is this possible? This is what I've tried, and it hasn't worked.
Code:
$HTTP["url"] == "URL1" {
scgi.server = (
"/RPC2" =>
[code]...
SCGI requests aren't sent to the correct port, regardless of what file is accessed.
I've got this problem for a few weeks and I cannot figure out. I'm pulling my hair out. I have a server installed PHP, lighttpd and redis. Sometimes, I got the following messages in the error log of lighty: Code: 2010-09-24 13:57:33: (mod_fastcgi.c.3011) backend is overloaded; we'll disable it for 1 seconds and send the request to anoth er backend instead: reconnects: 0 load: 567 2010-09-24 13:57:33: (mod_fastcgi.c.3011) backend is overloaded; we'll disable it for 1 seconds and send the request to anoth
er backend instead: reconnects: 0 load: 626 and:
[Code]..
what the procedure is to file bugs against slackware so I will post here. The rc.lighttpd I have works but the function to check if lighttpd is running has an exception when there's no lighttpd.
View 2 Replies View RelatedI'm looking at setting up a couple automated systems: Here are a few examples:
* Internal accounting system to download and process emails
* Public web server to visit
I could put each system on its own separate box -- for example, it's generally good practice to separate anything that external users have access to (such as a webserver) from internal processes such as accounting. Now, rather than dishing out the money for two separate servers, could I get away with just installing new instances of VMWare on the same box for each system?
To give you an idea, these are not large scale computationally sensitive systems. The accounting one is simply downloading and tallying emails, and the latter is just a webserver with maybe 5 hits per day on a good day. I could definitely pick up a new box for say $50, but I wanted to know the general practice of using VMWare on the same box versus two separate boxes.
How do I stop Lighttpd server from auto starting when I boot? I'm using it on my laptop for testing and I'd like to turn it on when I need it but not have it autostart.
View 1 Replies View RelatedI'm curious if anybody can shed some light for me in this department. We're in a large environment with a Windows DHCP Server. We have been tinkering with LTSP on Edubuntu as thin and fat clients. It works great, but right now we just have 1 server handling the lab, which works fine unless we want to expand, which may be very possible.
These are the instructions I received:
Login to your windows server and load the DHCP configuration screen
Create a DHCP reservation for the MAC address you obtained
Add the configuration options below to enable the machine to boot from the LTSP server
017 Root Path: /opt/ltsp/i386
066 Boot Server Host Name: <ip address>
067 Bootfile Name: ltsp/arch/pxelinux.0 # Specify CPU architecture in place of 'arch', for instance 'i386'
From: [url]
I'm curious, what if I want to have multiple Ubuntu servers on the network that I want to have bootable? For example, let's say I have 3 labs, and 3 servers. Server A to Lab A, Server B to Lab B, and Server C to Lab C. I want all C's computers to boot to C, and B to B, A to A, etc.
1 - How would I add multiple entries on the Windows DHCP Server to allow all 3 (A B C) servers to boot?
2 - How would I be able to isolate the clients so ONLY Lab A clients boot to Server A, etc?
I installed lighttpd to be able to view cgi files that display the status of my UPS. For the most part is has worked w/o incident i.e. until recently when the UPS battery failed on my APC backups xs 1500 lcd. I could not view the multimon.cgi file via the localhost or 127.0.0.1 url e.g.: [URL]... I'd get 404 page not found message. After checking links here and on the web, I tried: [URL]... The page is displayed. From this discovery, I'm not sure that this is a web server configuration or a network host configuration issue or what. I'm running Lucid with all updates, no mods to lighttpd except I added the mod_fastcgi line to the lighttpd.conf file
View 7 Replies View RelatedI have installed lighttpd from svn as
Code:
Then I created four directories
Code:
And ls -l for following is
Code:
So permissions are correct upto here.
Then
Code:
Changed the following to
Code:
To
Code:
Then
Code:
Now I run
Code:
I can see
Code:
lighttpd is running.
Following is lighttpd.conf [url]
I created some html pages in /var/lighttpd/ in a directory called jp (which I had made).
Permissions of Document ROOT
Code:
And the directory
Code:
I was not able to see the webpages [url] but I was able to see [url] so why I could not browse the directory jp
I am getting a 404 not found error. Where as the page exists.
Lighttpd anti-hotlinking for images i just want these domain to link my imgages (test1.com,newtest2.cn,800keke.net,800org.com.cn),the other site will be redirect to [url].
lighttp configuration :
Code:
This configure onle effect to test1.com. no effect to (newtest3.cn,800keke.net,800org.com.cn. i still dont know why..
I am currently working on managing multiple linux servers in remote locations, servers particularly user for web hosting. I need to backup data to a backup server but rsync which i currently using doesnt helps is there any tool to backup every server with out modifying it bcos there are hundreds of servers so installing a tool in every server is time consuming process.
View 7 Replies View Relatedby now I have 10 servers for hpc, power computing oriented. My users need to launch several processes using qmake. The users are used to work with ubuntu 9.10, and the software from the repositories is switable for them. I've deployed ubuntu 9.10 to all 10 servers (pxe rocks). By now we work with parallel-ssh and cluster-ssh, which allows as to launch the same process to all servers. With this tools this tools the servers remain as independent but with the same software and the same launched command. Now we would like to go to next step and see all the servers as a single one with all the resources from the other 9 as if was its resources. The difference would be substantial in time to process and also time to design the command to launch.
View 13 Replies View RelatedI have been searching in the forum and google but still not lucky enough to figure out yetI have a lighttpd server runningbecause apache consume so much CPU and memory) andqmailtoaster (just setup).Here is the configuration in cgi modules:
Code:
cgi.assign = ( ".pl" => "/usr/bin/perl",
".cgi" => "/usr/bin/perl",
[code]....
I have followed all the steps as mentioned on documentation.except automake (I am not clear as where to make automake)
I logged in as Root on a Ubuntu system
and then
Code:
cd /opt
svn checkout svn://svn.lighttpd.net/lighttpd/branches/lighttpd-1.4.x/
cd lighttpd-1.4.x
./autogen.sh
./configure
make
make install
After this what do I need to do to be able to start the lighttpd ?After this I did not found any script /etc/init.d/lighttpd. so what more has to be done ?
I have an Ubuntu server running with lighttpd.
The file, access.log has utilized 73GB at: logs/lighttpd/, which contains data since 3 to 4 years (approx.)
So, i need to have only last 6 months logs in the file and the rest to be cleared.
For the 1st domain,say domain1. I name the index file as:
[code]...
3 identical files. It works seamlessly. On browser its webpage can be evoked. Now I add another domain, say domain2. How shall I name its index files?
[code]...
[url]
I ran across the above article, which described a DoS attack in which requests are sent very slowly to the Web server. I'm running lighttpd 1.4.28 on a Gentoo Linux server, and I'm wondering if there is anything I could do in preparation to defend against such an attack.
A bug report [url] seems to indicate that there was a patch in place already against this sort of attack, but I wanted to be sure that was the same thing and if there was anything else I needed to do.
This is what I did till now and all was installed with success:
yum update
wget [URL]
yum install lighttpd
chkconfig --levels 235 lighttpd on
/etc/init.d/lighttpd start
Must I configure something else too? if yes... what?
I'm curious how I can use a Windows client with two separate accounts to connect, at the same time, to a SMB server hosting two shares. (Provided permissions and accounts are all in order)
Scenario:User1 is always logged onto a Windows client mapped to a Public share on a Linux SMB server.I need a way to keep User1 connected to the Public share and then when needed, allow User1 to provide User2's credentials to connect to a Restricted share.The only way I've been able to do this is to disconnect from the Public Share then reconnect to the Restricted share using User2's credentials. (This is the issue because I need to keep User1 connected to the Public share).Is this a limitation of SMB? Or am I missing a configuration? Please point me in the right direction
create an Apache web server with multiple user accounts, for work. Each user needs to be able to upload his/her files via SSH Each user needs his/her own web directory, (preferably in their home directory for ease with permissions) There web directories need to be password protected Only one user account (mine) should be allowed remote SSH control. It needs to be easy to add new users to the system.
View 1 Replies View RelatedI have multiple video streaming servers(Red5 running on machines internally on LAN. For different subdomains.Ubuntu 10.04 The front end to the is apache2 on a Bastion Host. To be able to reach the streaming server I embed a javascript in HTML pages as follows
Code:
<embed .....
var="rtmp://site1.my_domain.com"
>
[code]....
how will I make sure this rtmp request is mapped to a port different than 1935 as there are three other streaming servers which are also to respond to their respective requests.
I know that you can access and run any script of the web by wget:
Code:
wget mydomain.com/page.php
But this is literally accessing it externally through the web, i think that it is safer and faster to access the script internally. I am using lighttpd to host my php pages, and is there a way to do that? I have had some hosting experiences, the cronjobs on the hosts let u input:
Code:
* * * * * php /public_html/path/page.php
I want to run a server with multiple blog with worpress, is there a tutorial ?
View 2 Replies View RelatedRecently I've been earning money doing web development, php, html/css, MySQL and so on. What I have encountered a lot are clients that need a complete solution. They need their site built, but they also need a hosting solution. I've sent more than just a few clients off to GoDaddy, and quite frankly, I'd like to cash in on some of that.
It would do wonders for my business if I could offer them a hosting solution with full support on top of building their site. My problem is I have no idea how to do this. So I'd like to know how I can host multiple sites on the same server. Does anyone know of a nice guide I can follow to set this up? It's really important that I can add sites fairly easily over the internet. Since I will be away at school, I won't have direct access to the server
I work for a college with many departments. I'd like to just deploy one LDAP/krb5 server (plus slave replicas) to authenticate all users in all departmentsIs it possible to do this?The proposed DNs for the departments matches what is done for NIS now.If anyone has any pointers or URLs that describe how to properly do this.
View 1 Replies View RelatedWe have to install centos 5.5 in approx 60 servers and we want to have a server in which we can create an image of 1 server and deploy it on all other severs through pxe. Mainly all servers will be having raid 5 or raid 1 configured. So the utility should be having the raid support.
View 1 Replies View RelatedI have 16 linux servers that use /etc/hosts files to see and talk with each other. I'm adding servers to this pool of servers. It is required to do host resolution via the /etc/hosts files. DNS or NIS are not alternatives. Aside from manually editing each of the 16+ /etc/hosts files every time I add a server or editing one /etc/hosts file on one server then scp'ing it to all the other servers, is there anyway to edit the /etc/hosts on one server and "push" it onto the other servers that need the new /etc/hosts file?
Everywhere I've looked on the Net, there hasn't been any suggestion except for the options I mention here.
Or am I just whistling in the wind?
Running Ubuntu Server 9.10.I have a couple of programs that I would like to start at boot, they will both run forever. I have created a cron job with @reboot and that will start a program, but if I have multiple programs in there it waits for the first to finish before starting the next.
View 2 Replies View RelatedIm moving all my websites on a dedicated box. I had a cpanel hosting account, and now moving to a terminal and ssh system.I need some advice on choosing my mail setup. I need POP, SMTP, with multiple domains, as host for a few clients.I would like the most simple version.The server will only send +- 100 mails / day.I currently running Ubuntu Linux 10.04.
View 1 Replies View RelatedI have recently setup an Ubuntu 10.04 Minimal x64 Server. I plan on setting it up as a mail server. I need a secure server, that has spam prevention on it. Im setting up around 50 domains and would like a web based control panel. What is the most secure mail server, that i can setup for multiple domains?
View 2 Replies View RelatedI am tasked with setting up 3 out of the 6 servers and dividing up 500GB of space in the most efficient manner amongst the 3 servers. The space is in a pool which can be assigned to virtual drives. Each virtual drive can be assigned as disk0 or disk1 and so on to one or more servers. They'll be running CentOS.
On the second try I came up with this scheme:
shared sda1 -- /boot (ext3)
shared sda2 -- /home (ext3)
[code]....