I rebooted and my normal splash screen with the ubuntu and 4 white dots doesn't show up. instead I see something Islamic with the words allah the merciful. I am looking back at any new software I installed or updated and see nothing out of the usual, is there a way i check to see if everything is on the up & up and revert back to my normal splash screen?
View 9 RepliesWhen I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies View RelatedSince updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies View RelatedI'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
Out of nowhere Ubuntu (intrepid, I believe) has stopped loading for me. When it attempts to load gdm the screen starts flashing at the splash screen and then eventually dumps me to the terminal. From there I can login without any problems but can not get the GUI to load.
When I run sudo gdm-binary it does the flashing splash screen again and then spits out the error message: WARNING: Unable to find users: no seat-id found. Then a few warnings about longest graphic displayed 2.5xxx seconds
I tried running sudo dpkg-recondifigure gdm and relaunch gdm as above and it did the same thing.
I was not able to successfully connect to my wireless network through the terminal to try to update in the hopes of that fixing the problem. Perhaps someone can give me instructions on how? (I have tried but can not figure out how to initialize wlan0).
Or, is there something I can do from my installation CD?
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
Today I decided to customise my Ubuntu by installing my own picture over the default picture used in the log-in screen. I did a search and found it (in /usr/share/backgrounds). I looked into it a bit and found that the image was a .jpg with the name changed to a .png extension. I though I copied the title of it but must have hit the wrong button.
I put my picture in the folder. I then copied the name of the file, then deleted it. I went to paste the name over my new picture, and then found that I had hit the wrong button to copy it. When I delete things I usually hold shift to perma-delete it, so it isn't in the bin. Oh btw, I did this before in 10.04 and it worked in case anyone wants to do the same. It just needs to be a .jpg file, renamed to end with .png
I recently got this theme / login screen from here > [URL]
It is the 3rd one named "Login-Scan-fusion" I don't know how to set this up, how do I make it my login screen? I am using ubuntu 10.4LTS
I have the latest version of ubuntu, my problem is my desktop background is black, when I shut the PC down the desktop background (the picture set as my background) flashes up, (the picture will change when I change the background). Looks like the black desktop background is hiding it. Also when opening emails with attachments the attachment opens then gets covered with the black background.
View 2 Replies View RelatedI was trying to fix my audio driver so that my speakers would work after installing Linux Mint 8. I rebooted it to see if it worked but the computer won't boot up. It gets past the toshiba screen and the mint logo shows up like normal, but then I get what I think is an error message. I can't be sure though because the screen is not showing a solid picture. If I hit escape, I get another similar screen. If I hit escape again the screen goes blank and I can no longer get it to do anything. I'm new to Linux and not much of a computer wiz.
View 5 Replies View RelatedIs there any way I can "change" the login screen logo to the one I have in the picture?
I thought if I placed it in usr/share/backgrounds it would change them both but to no avail.
The laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
View 2 Replies View RelatedI created bootable CD and now trying to install Ubuntu on the IBM TP. Boot sequence is starting, CD is spinning, HDD is blinking but after few seconds little picture appears on the bottom of the screen with "a keyboard key = person in a circle" ?? And it is standing there many hours w/o any action on the screen. what is this and how to continue with installation ?
View 5 Replies View RelatedProblem: In Fedora 7 picture offset about 5 mm to righ on screen. I solved this with xvidtune and insert modeline in xorg.conf. In section Monitor..... I'm not sure. Why I can't use this trick in Fedora 12?
View 3 Replies View Relatedi had just edited a picture in digikam that was going to be my new desktop wallpaper.when i went into system/preferences/appearance to make the new change it would not show the new picture that i had just edited as a choice to change my new wallpaper to. then i tried closing the appearance box and it would not close.then i shut down and restarted and when i bring up the appearance box it does not let me click on anything within.also can't close it.seems like other applications are working normally.
View 9 Replies View RelatedI'm trying to use Pinta Image Editor but I cannot find an option to preview the image, in a viewable size, before I work on it.
what to do in this situation? Prefferably it would be nice to view all the pictures as thumbnails.
My main workstation incorporates a mixture of ext3, ext4, and NTFS partitions scattered across a number of hard drives. Several of the ext4 partitions are encrypted, and I intend to encrypt the rest of the Linux partitions in the near future.I run VMware workstation, with several Windows OS guests, including Win2K, WinXP and Win7. My Win7 VM is installed on a virtual hard disk, and that virtual hard disk is encrypted using VMware facilities.So this leaves me with a bunch of NTFS partitions that are not encrypted. These are physical partitions on a couple of different hard drives. The reason I have them is ancient and historical, and as I have upgraded my system over time I have maintained the architecture due to the extreme difficulty of rearranging Windows systems.I still need to maintain Win2K and WinXP support, and rearranging those virtual machines would represent a hideous nightmare for me; I really want to maintain the same hard drive partition architecture.But I want to encrypt the NTFS partitions, in a fashion that can be handled by any of the Windows operating systems, AND can be accessed for read and write from Linux.Is this possible? If not using Windows facilities (I don't think ntfs-3g handles encryption, and there are known backdoors in the Windows facilities anyway), is there any third party solution that would work? Would True Crypt do the job in a fashion that would permit access from all the various operating systems, as required? I do generally mount the NTFS partitions in whichever Windows VM is appropriate, then share them out via SMB, but there are circumstances (like when a VM is not running) where I will directly hit them from Linux. So, it is possible for me to contemplate a solution that only works from Windows, but this would cost me the ability to repair/modify those filesystems directly from Linux, which under certain circumstances (a malfunction of the VM, for instance) could be a problem.
View 2 Replies View RelatedI use linux mint 8, and I want to change the background for the login screen. For easier and smoother login. Ive googled for days,cand nothing works. I tried GDM2 and I press select new image, but it doesnt work. Do I need the image in a certain folder?
View 2 Replies View RelatedWhen I hover over an open programme which is on the task bar I get a pop up, but instead of a picture of the actually programme I get a grey box like this
View 3 Replies View RelatedThe screen that with the background pic at below is it call splash screen?
How to change the screen at above to text based that shows what services have been started, and if the service has been started, it will show ok at the right side.
I installed 10.04 on my Toshiba laptop, but for some reason there is no violet splash screen with the "Ubuntu" word when the system is loading. Instead there is a bald dash in the upper left corner that keeps blinking and then it is changed by regular font dash, then there are some letters (like system is checking something?) and that's it, one second after my desktop welcomes me. What could be the problem? I feel like I haven't had such a problem when I was installing it on another computer. Though it might be because I am installing from USB drive, but not, installed from CD with the image recorded and still the same problem.
View 2 Replies View RelatedI want to set a different splash screen instead of the one that shows up just before and just after I log in (Ubuntu and the loading bar)
I installed gnome-splashschreen-manager and through that I set the splash screen to another jpg image but this doesnt seem to work. I dint see any difference after rebooting. Am I doing something wrong in GNOME Splash Screen Preferences? This method seemed really straight forward.
When i stream on sites like ....., megaupload etc. it's fine However when i try to put it into full screen the picture is all funny looking I just installed suse on my others computers and one of them seem to be only having this problem.
View 9 Replies View RelatedI installed the beta version of Ubuntu 10.4, and on top of that Ubuntu Studio (for the programs it brings with it); but don't like the splash screen.
How do I disable it? (I tried uninstalling the Ubuntu studio desktop, but it did not remove the splash screen).
*Edit, following Ubuntu studio apps are still installed on my system:
Code:
ubuntustudio-default-settings ubuntustudio-screensaver
ubuntustudio-icon-theme ubuntustudio-sounds
ubuntustudio-look ubuntustudio-theme
ubuntustudio-menu ubuntustudio-wallpapers
Some time ago I installed KDE on my machine, though I use gnome as the default. (I rarely login on KDE) .Since then, when I login in my default gnome I get those futuristic KDE cursors, which I hate by the way. I've been trying to go back to my default cursors but I've had no success. I go to System -> Appearance -> Customize -> Pointer and then I select Default Pointer or even DMZ (white) I click on close twice and nothing happens. I've even removed the "oxygen-cursor-theme" using the package manager. How can I get my default mouse cursors back?
On the same note, before I get the login screen and after clicking on logout/restart I get a Kubuntu blue (splash?) screen, I'd prefer not to get this screen. how to get rid of this, too? (Getting rid of the cursors would be most important, but if I can get rid of this screen it'd be nice, too)