When I attempted to create a dual boot computer with windows by accident I erased windows so I installed ubuntu as my operating system . I have since recovered the windows partition and want to create again a dual boot system. I have down loaded GaG is there a way to install it using Ubuntu 10-10,. I would prefer not to need to re-install Ubuntu?
View 1 Replies
I'm running UbuntuStudio 9.10 on my Toshiba Satellite A40 Laptop... it's perfect and I love it... but, I installed it cleanly doing a reformat of the drive, and with no partition - so using as much of the newly replaced 80gb drive as possible.Now, if I want to create a partition to install WinXP as a dual boot, 1) can this be done? 2) what do I use to do it?
View 9 Replies View RelatedI just reinstalled Ubuntu from the LiveCD onto my second HDD because that was my intent originally, and I very much disliked having to choose my OS a second time before finally booting into Ubuntu.
Is there any way for me to turn these separate installations (Win7 on my first HDD, Ubuntu on my second HDD) into a nice dual boot system without reinstalling Ubuntu or am I going to have to reinstall Ubuntu?
If I do have to reinstall Ubuntu, do I tell the partition manager to load the boot loaders from Ubuntu onto the Windows drive, or do I tell it to load them onto the 100MB windows system partition? I currently just put the entire installation onto my second HDD, and then lost my dual boot option. Now I have to switch first boot device in BIOS to switch between operating systems.
I want to make a Dual Boot system completely made out of Linux. The two OS will be Fedora 15 (Gnome) and Ubuntu 11.04 (as i love the simplicity of Gnome). The question that has been striking me for quite sometime is not that if I can have both of them on a single computer but that if both of them can have a single Linux-Swap and home drive with separate root drives. Root drives for Ubuntu 11.04 might be around 10GB while that for Fedora 15 will be 20GB with 5GB of Linux-Swap (a single swap drive for both the OS) and if possible a 20GB space for the home folder common for both the OS.
View 4 Replies View RelatedI am currently running Windows Vista... and I want to install Ubuntu 10.10. Just wondered if anyone can tell me how to install Ubuntu alongside my Windows OS so that I can still play WoW and other windows games.
View 6 Replies View RelatedI am trying to create a dual boot setup with Windows XP. Everything goes smoothly untill the final reboot. I get a text screen giving me the two options of booting into Windows XP or Mythbuntu. When I select Mythbuntu I get a second text screen with a rectangle only showing Windows XP as an option -nothing else. Hitting enter causes error message.
If I selext the Windows XP option on the first screen system boots into windows without a problem.
I suspect this should be fairly easy to fix - but being a complete noob to Linux I am lost as to what to do to correct this.
With Windows 7 pre-installed, what is the procedure for creating a dual boot system with Debian (kde)? The computer has an amd64 processor.
View 11 Replies View RelatedI am running OS 11.3 and I want to create a boot CD so that if my boot partition is moved I can still boot from the boot CD and re-initialize grub again. Is there some easy to use utility which will enable me to do this ?
View 3 Replies View Relatedit started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
I have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies View RelatedI'm having a frustrating time trying to install Ubuntu as a dual boot with Windows 7 on a new Acer Aspire 5750.The initial install proceeded without incident until an error along the lines of "Cannot install GRUB to /dev/sda".I continued without installing GRUB, and attempted to install GRUB from the live CD:Code:sudo mount /dev/sda5 /mntsudo grub-setup -d /mnt/boot/grub /dev/sdaThis installed GRUB, but only linking to my Windows 7 partition (sda2).
View 5 Replies View RelatedI turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies View RelatedI'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
I have a PC with three HD's. My primary hard drive has a single partition and contains Win XP SP3. I have a second hard drive which I use to store junk (pictures, movies, etc). The third, 60GB HD, I just put into my PC and I wanted to install Fedora 11 onto it. I want to have a dual boot system with WinXP being the default boot. I downloaded the latest build of Fedora 11, created a LiveCD out of it and I tried to install the OS onto this third new hard drive. I installed the OS, I told it to use the entire third HD and to have a dual boot setup and make the WinXP OS be the default boot. The installation seemed to go without any problems. However, after restarting the PC, the PC stops booting right after the DELL screen. It gives me a cursor and that's it. It just sits there. I have tried redoing the install about 4 different times now and no matter how I change the different installation options, I get the same result. Now I can't even boot into XP even after I disconnect the third drive. I am guessing that the dual boot got screwed up; I just don't know how to fix it and more importantly, how to install Fedora, dual boot.
View 15 Replies View RelatedI did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
It would be convenient if i could simply install 11.3 along side my Ubuntu distro. I see yast enables me to reduce my sda1 and create a new partition, (sda3) However it offers to mount sda3 in /usr ? Could you offer me any advice please? My objective is to be able to select which distro from the grub menu.
View 9 Replies View RelatedGnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedI have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.
I am trying to install dual boot Ubuntu with Win XP SP3. I defragmented the hard disk (Capacity 100 GB) of which windows (it shows continous files) is taking 92.5 GB and then it shows only 251 MB left for Ubuntu. I copied almost the entire data into an external hard disk. But still it shows the hard drive with 92 GB. My question is where is the rest of 7 GB. What do I do to get windows to vacate more from hard disk so that I can proceed with Ubuntu.
View 5 Replies View Relatedcan i install win xp to dual boot from ubuntu?
View 9 Replies View RelatedI dual boot ubuntu with windows xp using grub. I need to install windows 7 now too. How do I go about doing this?
View 9 Replies View RelatedI want to install ubuntu with dual boot.
I already installed the xp.
I followed this step.
Code:
Hard disk partition:
Selected first option "install them side by side, choosing between them at each startup." to get dual boot.
All went fine until when i click the install button(setp 7 of 7).
Installation window appeared and showed 1% in the progress bar.
Then one blank screen appeared and go to Ubuntu Desktop.
I'm new to Ubuntu. I'm on Windows 7 64-bit, and I want to install and dual boot ubuntu 9.10 with Windows 7.
Warning: Ubuntu Desktop edition installer no longer allows a custom installation of GRUB, and it now uses GRUB2 (which allows very little customization). Do not use the Karmic Koala Desktop edition if you use a boot partition, use multiple OS (more than 2), or chainload bootloaders. The Ubuntu installer will overwrite your Master Boot Record and you will later be forced to recreate it. This is a serious flaw in Karmic Koala. Use the Ubuntu Server edition instead (and then later add the ubuntu-desktop).
These instructions [listed in the site] are for installing more than two operating systems on your hard drive. If you only need two operating systems (such as a Windows installation and a (K)ubuntu Linux installation), it is easiest to just use the (K)ubuntu installer to do it for you (as detailed on the main page). I know that: (K)ubuntu installer to do it for you == select "install to the largest available free space" in the install through LiveCD, of course after creating unpartitioned space in my hard disk (preferably 20GB+)..
My question is: given the warning mentioned in the quote above, do I still need to use Ubuntu Server edition even if I'm going for the aforementioned easy way? Or can I just go with the Desktop edition and it'll install fine, without messing up the MBR...
I have a PC with 3 hard disks, one IDE (30GB) plus two Sata (80 & 180 GB). The IDE is the disk master. Previously I had Ubuntu on the IDE disk, the smaller SATA for Windows XP and the larger SATA for all data. I recently decided to do a clean Windows install and thought that at the same time I'd swap the two OS disks. After I successfully installed the two systems (Ubuntu is Grub 2) I don't get any options presented at boot up. If I boot from hard disk and choose the IDE disk Windows books immediately. If I try to change the disk boot order in the BIOS to choose the Ubuntu disk, nothing happens. Any idea how to get my dual boot back?
View 1 Replies View Relatedi've tried this once but it made my desktop inoperable maybe along the installation some things went wrong. I have this MSi all in one touchscreen desktop model AIO 2010 with windows 7 home premium installed on it and i want to dual boot with ubuntu 7 Is there any step by step guide on how to do it properly?
MSi All in one model AIO 2010
AMD Athlon(tm) X2 Dual core Processor 3250e
Hard disk is sata 320 g
ATI Radeon HD 3200 Graphics
how to properly install Maverick Meerkat
I want to install ubuntu as a dual boot OS (running Windows 7 at the moment). What would be the best way for me to do this? Would it be the windows installer option Ubuntu has?
View 5 Replies View Relatedhow do I install for dual boot mode, what exactly does that mean ( can I boot in either windows or linux then?), how do I do it, and How hard is it to unistall if i would like later on?
View 8 Replies View RelatedI need to re-install ubuntu but I also have windows on the same computer(GRUB). Can I just boot from cd? Is there and option in the live cd for reinstalls or do I have to destroy the partition?
View 3 Replies View RelatedI FINALLY convinced my wife to try Ubuntu on her laptop. We selected Install 10.4 side-by-side with XP. The grub menu shows up, but Windows is not listed. She's happy with Ubuntu so far, but I'd like to know why I can't use XP anymore. btw, I actually made the mistake of using the import accounts option, which filled up the new partition and made Ubuntu unbootable. I deleted some things from the command prompt, and it's running fine now.HP Pavilion1.5 GHz512MB Ram
View 2 Replies View Related
