Ubuntu :: Python Consumes Extremely Lot Of Ram Usage?

Apr 6, 2010

i noticed few times that my ram usage in gnome increases high. So i found that python is using more than 500 MB Ram. Normally i didn�t notice this python. What does it do?

I am not sure, but i think that these increasing has something to do with skype/empathy (i think it grows after using this programs...

So, i killed the process and ram usage is normal.

View 2 Replies


ADVERTISEMENT

OpenSUSE Install :: Extremely High CPU Usage?

Mar 18, 2011

However, I would like to ask if anyone else is experiencing Higher than normal CPU usage with openSuSE 11.4 PR?? My system, which is probably similar to others, increases the air flow with the fan on the CPU when it is working hard. Mine gets rather noisy. (don't have it on the floor, but right next to me) This fan speed increase has been lots more prevalent in the newest version of openSuSE.

Have also used 'top' and it looks like xorg is one of the biggest hogs. However, when I use VMware it goes into hyper drive a lot.

View 9 Replies View Related

General :: Extremely Slow Write On Disk With High CPU Usage / Make It Up?

Sep 4, 2010

My problem is extremely slow write on hard disk and 100% cpu usage and it happens when I want to write something on the hard derive not any other external derive.

Tried a fresh ubuntu install. No change. I am not even sure if it is a software or hardware problem.

View 1 Replies View Related

Ubuntu :: System Intermittently Freezing - Usage Python

Nov 30, 2010

I have a bit of mystery regarding my system intermittently freezing. First off, the info. I using/running: Ubuntu 10.10, 64bit version (clean installation) Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (not overclocked) 6GB RAM Nvidia GTX260 Nvidia proprietary drivers 1TB Western Digital HD (32MB cache) Now, the problem: A while ago, I started experiencing intermittent system freezes that would last for 2 or 3 minutes and happen about once every 45 to 75 minutes.

The Gnome System Monitor (GSM) would show 100% CPU utilization, but top, htop, and conky only show about 11% usage. I pulled up the process list in GSM. However, I had issues, for the obvious reason, when bringing it up when the CPU was spiking. Even when I could, it only showed the usual suspects (Firefox, Deluge, Ktorrent, and Xorg) running the high single digits. This was backed up in top, htop, and conky. I also checked the RAM, but usage was down around 25%, with nothing in the swap.

I checked the messages log, but there was nothing there. Nor in dmesg. At least not that my limited Linux admin skills could find. The freeze just happened, so I've attached them in their entirety. I've come to suspect that Python is the cause. It happens most often when I have Ktorrent or Deluge going. I used to use Deluge, but moved to Ktorrent to test if Deluge itself was the problem. They're both written in python though, and both seem to cause the slowdown. It also happens when other python-based programs are running, such as the updater, but not as much or as bad. Things I've tried to fix the problem:

- Clean install (first time in over 18 months)
- Updated Nvidia driver by adding a repository
- Updated Deluge by adding a repository
- Enabled backports.
- Gave my PC the finger

This is driving me nuts. If it was just BT clients, I'd only run those at nights, but it's also parts of Ubuntu itself that relies on python, which I really think is the problem.

View 9 Replies View Related

Fedora :: Memory Usage For Python Climbing?

Jan 14, 2011

check out the system monitor you can see the memory usage for python climbing.

View 5 Replies View Related

Ubuntu :: Fontconfig Consumes Too Much Memory

Mar 30, 2011

My Ubuntu consumes too much memory. I have checked it with memstat and have found a lot of lines like these:

[Code]...

There are more than 480 lines like this! What are these fontconfigs for? Where do they come from?

View 3 Replies View Related

Ubuntu :: 9.10 - Flash Plugin Consumes 70% Of Processor?

Jan 29, 2010

Recently I am getting problems to open a couple of sites, example: [URL]...Firefox process consumes 70% of the processor when it is open.My flash plugin is sun-java6-jre, ubuntu repositories.Somebody what do know happen? is the flash the responsible ?

View 3 Replies View Related

Ubuntu Networking :: Ksoftirqd Consumes 100% CPU For Several Minutes?

Jul 12, 2010

I've had this problem recently. Whenever I open an open office.org document from a cifs/SAMBA share as I navigate through it my laptop will lock up, and by lock up I mean so bad that I can't even move the mouse. If I let it sit for anywhere from 30 seconds to 2 minutes it will come out of it. Trying to navigate through the document again will trigger a similar episode.

I finally got fed up and opened a terminal with top and set it to always on top, then I opened my samba share, opened my spreadsheet. and proceeded to trigger my problem. When the lockup happened it was so bad and so quick that top stopped updating and I wasn't even able to see something creep up in CPU usage. As it came out of it top started updating in bursts, first ksoftirqd/0 was at 100%, then that dropped to near nothing, then xorg spiked to 100%, then the system returned to normal.

I googled around an found lots of speculation, and bug reports that were way above my head. Some of the speculation suggested it was a kernel issue, but that has supposedly been fixed. Another forum post said that it was a multi-processor issue. (the guy was running it in a vm so he just removed the vCPU) And yet another suggested a network issue/attack. I am running a Dell Latitude D620 with a dual core Intel proc and a Broadcomm network card (wired) and an Intel wireless card. I have all the latest updates. The shares I experience this issue with (only shares I really use) are on a Netapp and are active directory integrated (my laptop is not joined to the domain)

View 1 Replies View Related

Debian :: Bash Consumes 100% Cpu

Sep 21, 2015

I have a virtual server with debian and since last Friday a problem. The server is running normally. All sites hosted show no problems. But If I logon via ssh is the CPU usage of all cores goes to 100%. A simple cd (change dir) then takes about 90 seconds. using top or htop bash is the top scorer. Unfortunately I have absolutely no approach what I have to change here or where the misconduct comes from.

View 2 Replies View Related

Ubuntu :: Rhythmbox Stalls System - Consumes All Memory

Sep 1, 2010

Rhythmbox stalls my computer. I start it and within 10-20 seconds it starts to search something (i.e. in the right bottom there appears a box with a red box sliding left and right). It consumes all my memory (1 giga) and the only thing it does is identify text files in a general directory, NOT in Music. I have completely removed the install, installed it again, the same text files earlier IDed are still there? Is there an alternative?
Computer details: Intel dual core, Nvidia, 64 bit Lucid. The flaw is that it runs on single memory.

View 3 Replies View Related

Ubuntu :: Program Convert Consumes Most Of The Computer's Memory

Oct 5, 2010

I am using ubuntu 10.10 with gnome desktop on a desktop computer (pentium 4 cpu with 1 Gb memory), and when I use OpenOffice Impress, convert opens up and uses most of my cpu power. Even worse, after closing OpenOffice and all instances of nautilus, convert stays in memory and keeps using most of my cpu power (between 30 and 75 %, acccording to system monitor.Is it normal ? How could I set up my computer to limit convert cpu usage, and to unload from memory after being used.

View 3 Replies View Related

OpenSUSE Multimedia :: HD Video Consumes 100% Cpu But Not In XP?

Oct 6, 2010

I am using the rather old openSUSE 11.0 with no plans of upgrading to 11.3 as of now. My system is also 5+ years with a P4 2.66GHz but with 2.5Gb ram. HD videos are utilizing 100% cpu and the video also keeps shaking. Neither does any other app work during this time. I cannot even stop the player. I've tried mplayer, smplayer, vlc, totem, gnome-player --- all with the same result.

But windows XP utilizes about 60% cpu and so no such problems. I also have ubuntu 7.10 installed and even mplayer here uses 100% cpu. Also not a troublesome issue but XP has higher volume.

View 5 Replies View Related

Ubuntu Multimedia :: Flash Video Consumes All CPU Resources On X220?

Jun 5, 2011

I'm running Ubuntu 11.04 (64bit) on my Thinkpad X220. When I watch flash videos I see that Xorg consumes a lot of resources (CPU time). Flash videos in full screen are extremely choppy. Playing videos with Mplayer, for example, is no problem at all. Any ideas how this can be fixed? I found lots of posts by other people with similar problems but they had different graphics cards so their solutions were not applicable in my case.

Code:
Linux montana 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
grep 'model name' /proc/cpuinfo | uniq:

[Code]...

View 5 Replies View Related

OpenSUSE Hardware :: XEN Kernel Consumes Memory - How To Fix It

May 20, 2010

My computer has 4GB installed but for some reason I could only see the 2 of the 4. At first I thought that this was because the XEN virtual operating system manager was running but even after I turned it off the problem exists. I could only see and use the 2GB of memory.

Code:

free -m
total used free shared buffers cached
Mem: 1914 1874 39 0 9 295
-/+ buffers/cache: 1570 343
Swap: 2062 1934 128

View 5 Replies View Related

General :: Status Of Memory Usage And Disk Usage Using Sigar In Windows And Ubuntu

Mar 15, 2010

I was trying to get the status of memory usage and disk usage using sigar in windows and ubuntu. done this in windows by just copying the sigar library into jdk library. But i was unable to do so in ubuntu. I've copied the library to java-6-sun library but still can't run the program.

View 14 Replies View Related

General :: Script That Names The Process In The System That Consumes The Most Memory?

Dec 31, 2010

I am writing a script that tells me which process consumes the most memory in the system this is what I have but I keep getting an error:

#! /bin/bash
# Autor: Jose miguel Colella
# Descripcion: Que proceso consume mas memoria

ps -e -o %mem -o args | sort -k 1 | tail -n2 | head -n1 | cut -d -f 3

I keep getting this message: cut: delimiter mist be a single character

View 4 Replies View Related

General :: Linux Shell Script .sh File Consumes High Memory?

Sep 8, 2010

I am having a php script which is used for bulk mailing. I run the script every minute through cron job. I have mentioned the path of the php script in a .sh file and execute the .sh file through cron job. Every time i run the script it utilizes high memory which results to server crash. how to restrict memory usage for that process to be a minimum one or how to set priority to be low for that process so that it is executed when there is no high priority jobs, so that the server runs normally without going down when the script runs

View 3 Replies View Related

Programming :: Make Python Programs Run Without Entering The Command Python?

Mar 22, 2009

I want to be able to do

sudo ./program.py

instead of always having to do

sudo python program.py

What do I need to change?

View 5 Replies View Related

Programming :: Python - Get Text File Data Into An Array On Python?

Nov 30, 2009

I've already used line split stuff to transform my data into something like this in a text file:

Code:

['1', '1', '3', '20.7505207']
['2', '1', '3', '23.0488319']
['3', '1', '3', '-1.5768747']
['4', '1', '3', '-26.4772491']

[code]....

How can I get this on a python program so I can manipulate it as an array?

View 3 Replies View Related

Fedora :: Hidden Disk Space Usage \ Can't Figure Out Where The Runaway Usage Is?

Dec 10, 2010

I'm running into a problem where my system is running out of disk space on the root partition, but I can't figure out where the runaway usage is. I've had a stable system for a couple of years now, and it just ran out of space. I cleaned some files up to get the system workable again, but can't find the big usage area, and I'm getting conflicting results.For example, when I do a df it says I'm using 44GB out of 58 GB:

Code:
[root@Zion ~]# df -h
Filesystem Size Used Avail Use% Mounted on

[code]....

View 5 Replies View Related

General :: Unix - Monitor Average CPU Usage And RAM Usage On One Process System?

Nov 15, 2010

Is there any way to monitor one process' CPU usage and RAM usage over time on Linux? I am trying to change to a cheaper VPS and need to work out what level of CPU and RAM I need!

View 2 Replies View Related

General :: Get Apt-get To Install Python Packages For A Different Version Of Python?

Oct 27, 2010

in ubuntu 10.10, I have installed python 2.7. I would like to use apt-get to install packages to this version of python but I haven't been able to figure out howThings I have tried without success:changing the symlink at /usr/bin/python to point to /usr/bin/python2.7 - even after doing this apt-get still installs stuff to python2.6.Set up python2.7 as the primary alternative using update-alternatives - doesn't work

View 3 Replies View Related

Software :: Python 3 Want Situation For Python 2 And Become Stop?

Jul 17, 2010

Python 3 want situation for python 2?Python 2 become stop?

View 1 Replies View Related

CentOS 5 :: Yum - Python-devel / Python Dependency

Jan 7, 2011

yum dependency problem please? I am running Centos 5.5. I need to install python-devel, but when I do so I get:

[Code]....

View 2 Replies View Related

Programming :: Python 2.x - Represent The Same In Python 3.x

Mar 4, 2010

I have a function definition in a Python 2.x script which take a tuple as one of its arguments, but 2to3 has no answers nor any of my searching on how to represent the same in Python 3.x

Code:

def blah(self, (string1, string2))

View 4 Replies View Related

CentOS 5 :: Upgrade Python-2.4.3 To Python-2.5?

Mar 30, 2011

How can I upgrade python-2.4.3 to python-2.5?

View 1 Replies View Related

Red Hat / Fedora :: Get The Value Of CPU Usage - Memory Usage ?

Jan 13, 2009

I am sure that all of us know the result of top command in linux. i want to get the value that the top command return as CPU usage, memory usage. so how do i do(programming relation)?

View 3 Replies View Related

Server :: "free" Shows Far More Memory Usage Than Summing Up Application Usage?

Aug 6, 2010

I've come across a really strange issue with one of my RHEL servers. The "free" command shows that 7019 MB of memory are actually in use by my system, but when summing up the actual usage (or even virtual usage like the example below) it doesn't add up - the sum is far less than what is reported by "free":

Code:

[root@server1 ~]# free -m
total used free shared buffers cached
Mem: 12011 7946 4065 0 4 23
-/+ buffers/cache: 7919 4092

[code]....

View 2 Replies View Related

Server :: Clear Cache Memory ( RHEL 5.1 ) As It Consumes Almost 100% Physical Memory?

Jan 11, 2010

let me know how to clear cache memory ( RHEL 5.1 ) as it consumes almost 100% physical memory.

View 3 Replies View Related

Ubuntu :: Python Interactive Session: "help()", Then "modules" Freezes Python?

Jan 12, 2011

This problem has to do with Python's interactive help (To get to the interactive help, just type help() at any interactive session). I like to browse all my installed Python modules, to see if I can find something that would be useful for my hobby programming projects. However, recently, typing modules (which is the command to list all installed modules) freezes the interactive session.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved