I am running Ubuntu 9.10 and trying to use OpenOffice 3.1. If I run OpenOffice, after 10 minutes or so, the whole computer freezes. Even if I have shut down OpenOffice it still happens. Only answer is to turn computer off and on again. I read some other people's posts listing the same problem and as a result uninstalled Open Office and then installed it again. I also uninstalled Compiz. Neither of these seem to be the solution. I have just installed Lotus Symphony and there are no problems with freezing and so the issue is definately with OO and Ubuntu.
I then on further advice uninstalled the bundled Ubuntu version of OpenOffice and installed directly from the OpenOffice website. The problem still remains. Next thing I tried was to uncheck autosave feature. The above problems only happen on my desktop. I also have an ASUS EEE Netbook running Ubuntu 9.10 Netbook remix. This is fine - the problem does not seem to affect the netbook. I would really like to continue to use OO - I like it a lot. Unfortunately this freezing issue is making it unusable.
Xorg takes 700+ mbs of ram, then in matter of hours it fills the swap and then system basically stops responding or whatever. And because its constantly allocating, it degrades perforamce horribly.Interesting thing is I never had this problem before, recently one of my ram modules broke (2+2 GB) and now I have only one, but it still doesnt explain the memory overuse. Windows 7 works perfectly fine.
Since when I upgraded OpenSuse from 10.2 to 11.3 (big jump, I know!), I can no longer use OpenOffice. When Java is Active, the OO applications crash after a few operations. Most of times they don't even start.
When run in a terminal, OO answers with errors like this:
Code: Exception in thread "Thread-1" java.lang.OutOfMemoryError: requested 24 bytes for CHeapObj-new. Out of swap space? #
it happened first after upgrading about a week (|| more) ago. i thought that it's just em.. kinda normal (i'm running debian unstable, so such things are happening often).
but now it became a problem: i've tried reinstalling nvidia's drivers and compiz itself. no effect. also, i can't catch any errors in logs.
Since upgrading to Lucid a few days ago I'm having intermittent problems (90% of the time)with opening OpenOffice files.When I open up a spreadsheet (.ods) in OO, (whether OO was already open or not) my screens go black, then flash on and off for 30 seconds (ish) as if trying to change the refresh rate.Sometimes this results in Gnome crashing and restarting itself. it settles down and is OK. On a few occasions I have had to change terminal and manually restart gdm.
Here's my environment;
Dell Latitude D620 nVidia GeForce Go 7300 (according to hwinfo) Ubuntu Lucid 32-bit (upgraded from Jaunty) 2 GB RAM
I've got the recommended "NVIDIA accelerated graphics driver (version current)" hardware driver and the NVIDIA X Server Settings applet, which says my NVIDIA driver version is 195.36.24. I'm running dual screens (1440x900 and 1280x1024) using TwinView. After a flicker, here is what I find in the Xorg.0.log;
Code:
(II) Jun 30 12:17:42 NVIDIA(0): Setting mode (II) Jun 30 12:17:42 NVIDIA(0): "CRT:nvidia-auto-select+1440+0,DFP:nvidia-auto-select+0+124" (II) Jun 30 12:17:43 NVIDIA(0): Setting mode
Is it possible to get a package that makes the OpenOffice drop-down for font selection use the fonts so that i can compare them? I seem to remember it is but can't remember the package name. I am really looking for something like the MicroSquish Font "Monotype Corsiva". I am currently using a LiveCd of Ubuntu 9.04.
I've just upgraded to Maverick Meerkat on a new Dell system and everything was working just peachy until today. I've spent the last couple days tweaking my ubuntu so something I did made it so that open office only allows me to click inside it and write text some of the time, and very slowly. And then my panel doesn't show the text of the main menu headers. If i click on them though, the menu shows up with text inside it totally in tact.
The problem disappears when I disable the additional driver (preferences-additional drivers-remove). And recurs when I activate it. So, suspect its a conflict with xorg and the proprietary driver. I'm running emerald with window decorations (theme is neon glow) - changing the emerald theme doesn't affect the problem. Im also running compiz-fusion.
i am working on a client server real-time gui application written in C++ for Redhat. There is an issue with this application that it makes the system hang. i am not able to sort out the issue as it happens randomly. Sometimes with in half an hour it makes the system hang, sometimes it takes 4 or 5 hours when it receives realtime data. Is there any way to debug this issue. I tried valgrind..but it was not of much use..
i am working on a client server real-time gui application written in C++ for linux os. There is an issue with this application that it makes the system hang. i am not able to sort out the issue as it happens randomly. Sometimes with in half an hour it makes the system hang, sometimes it takes 4 or 5 hours when it receives realtime data. Is there any way to debug this issue. I tried valgrind..but it was not of much use.
For some time now, my laptop makes a quick but loud buzz sound when I shutdown or restart it. Muting my sounds doesn't fix it. Before, it didn't do this. It just started one day and got worse till it happened everytime I shutdown or restart.
Going to preferences > sounds > changing sound theme to no sounds helped a bit and after doing this, it doesn't happen all the time anymore. This is quite disturbing especially when I'm in libraries. What worries me the most though is that it might affect my speaker.
I want a log or live data that discloses the system calls an application makes. I have used strace but can't find a guide for it that is decent. I'm interested in knowing the calls made after user intervention like opening a menu and so on. If you run (strace application_name) it is static. What good is this? When does strace make this file? When is this log produced?
My co-worker install CentOS with /var (ext3) is 1TB:
Code:
I do the following tasks to move sdb1 to VolGroup00:
After that I moved /var back to / folder and reboot but the system hangs at "Starting system logger". Uninstall and re-install sysklogd package don't make any change. What I don't understand is I can start syslogd from command line:
I'm running ubuntu 10.04 as a mythtv box and it works mostly fine. But occasionally the system will hang during booting and the last messages I can see are code...
So, I don't know. What is the problem? This system is supposed to run mostly unattended, I can't check all the time whether it booted alright.
Well i just installed ubuntu and its amazing but after playing around a little i installed compiz and when i restarted my laptop it just wont let me log on it keep freezing. i dono what to do how do i over write it or replace it or fix this problem?
iv looked on the wiki and tried what it says it doesn't work
My partner and I share the computer, so we are normally both logged in.
When we come to turn the computer off, one of us will log out then the other shuts down (to have a clean shutdown), but when either one of us uses 'Logout' the system just freezes, no response, nothing, have to turn the machine off via power button.
We can 'switch user' fine, and everything else appears ok but log out fails, I did try reporting a bug on this, but seems to have got taken over with people with dual screens / SLI cards, taking it over and its not the same thing.
I get the 'impression' its a graphics driver issue, I'm using the 'recommended' Nvidia driver (am at work and can't remember which version sorry).
I'm putting this in general, because I'm not sure if many of the specifics are relevant.I have an everex cloudbook which I purchased from eBay with hardy herron on it.I finally got around, today (I've had it for a year), to installing netbook remix 9.10 with a usb key I had also purchased from eBay.Now, during the upgrade (using update manager) from 9.10 to 10.04, the system appears to have frozen.(desktop frozen, no response to keyboard or mouse).Now, I'm not sure if something could still be happening inside there, and if it would be a good idea to let the machine site overnight before rebooting it. Frankly, it happened once already, and I rebooted, and update manager just took up where it left off once I logged in.
I have not determined what's causing these freezes. It's not a new machine, of course (everex, afaik, doesn't even exist now), so maybe netbook-remix is too taxing on the hardware? I installed xfce to get away from the bloated netbook-remix graphical menu garbage, which did seem to allow the system to run faster. Anyway, the real question here is, while the interface appears frozen, could the upgrade still be developing under the surface? (I hear a fan running in there. There is no hdd to spin, but flash memory, so I don't know if the fan is any indication of internal activity). Would you wait to reboot it? (update mgr indicated 4 hrs remaining to upgrade, in the installing upgrades phase, not downloading, appears it froze during "Running post-installation trigger install-info"). Or just reboot it and see what happens (get update mgr to start again?)? The system never froze on me with hardy. It was pretty quick and snappy, in fact.
Running Ubuntu 10.4 32bit (only) on my system with ati graphics card. I just ran a software update, and I believe a new kernel was installed. When I rebooted, I saw the "Ubuntu" loading screen, but then the system froze up and the screen went completely blank. Thinking it was a graphics issue, I tried to press escape to get into the grub bootloader. However, when I pressed escape at the proper time, the system just rebooted.
Thinking that grub was broken, I used a live cd to purge grub from my system and re-install it. When I rebooted, I got the same initial problem: I get the "Ubuntu" loading screen, but then the screen goes black and the system appears to be frozen. Again, if I press escape to try the grub bootloader, the system just reboots.
Nothing too major here but today I had a few programs open and was doing a bunch of things and suddenly the system froze.
I am on 10.04 LTS -
Are there checks that I can do to see if everything is ok?
I had to turn the power off and re-booted and everything is fine, or rather, seems to be 100% fine - but more out of curiosity Id like to see if there are some checks that I can do.
I think that ubuntu creates a log of activity if I am not mistaken?
[I'm not sure if this is the right forum. This is the closest I've found]. I've installed Ubuntu 10.04 LTS (dual boot with Windows XP SP3). After Ubuntu starts, it takes about 10 seconds, and the computer halts. No screen/mouse/keyboard activity. If I start Ubuntu under Recovery Mode, with failsafeX, it doesn't happen.
In the Windows all is fine. What did I wrong? [My CPU is: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz, if it matters...]
I've recently installed 10.04 LTS on a desktop PC so I can use it as a Zabbix monitoring machine.
I fresh installed and all seemed to be well but after a few restarts the system suddenly refused to boot anymore. The BIOS splash screen comes up and then a cursor blinks on the screen for a couple of seconds and then... nothing. The keyboard and monitor both go unresponsive and nothing happens.
I can hear the HD spin up and it isn't making any weird noises. Also, booting from the CD works and I can see and work with the HD so I'm not convinced that this is the problem.
In fact, I actually did a fresh reinstallation of 10.4 onto the machine and started from scratch. Again it ran fine for a few hours while I was setting Zabbix up. After a couple of restarts, again the freeze on boot.
I ran a HD scan and everything seems fine. I've also switched the HD over to the second IDE connection in the box just in case...
Does anyone else have this problem? Is it a bug? Any ideas on how to workaround it? (Short of going back to a previous Ubuntu version)
When I do some copying of files, or any background disk activity with file reading (transcoding a movie, uploading a big file to FTP, virus scanning) all computer becomes so slow, that I hardly can move my mouse, not to mention any productive use. I have SATA HDD, and Intel Quad CPU. I took measures to be sure it is not CPU or memory resource problem. Gentoo, Fedora, Windows don't freese that much on file reading. It is not a filesystem problem, or HDD, cuse I tried exactly this partition with other OSes.
Nice has a minor effect, but is is not enough, and I can't always start Nautilus with another nice level when I want to copy a file. What can I do to lower the priority of disk operations globally, and make apps to share disk thoughtput equally, not the one to occupie the disk until it finishes?
I seem to be having a problem on the new Kernel (2.6.35-23) with the system randomly freezing.
I have installed a number of things in recent days leading up to this problem, but when i boot with the old kernel i don't seem to have any issues. From this i am guessing its the new kernel.
The freezing seems (although i am not sure) to be worse when Rhythmbox is running. When it happens everything freezes, the playing song skips, replaying the same one second of music over and over. All the hotkeys stop and the mouse cursor stops responding.
I have seen people talking about system logs to look at system crashes but i don't know how to show those. I also doubt my ability to interpret them.
I'm having a problem with my Ubuntu 10.10 system. After installing the OS it worked fine. But after one or two restarts it totally freezes i mean NO Ctrl+Alt+Bckspc , NO Ctrl+Alt+F1 and Ctrl+Alt+Del works for me. I have the same problem with Ubuntu 10.04 , 9.10 also. ( Only Ubuntu version 9.04 Works fine for me ). But i want to make use the latest one. code...
After Ubuntu fails some time it crush the GRUB loader, so that i can't boot windows either. Any buddy tell me why this happen to me?
I've try to install Linux Mint 10 also but it freezes while installing..!!
Now I loaded the openSUSE 11.4 milestone 3. It works fine for now but i can't connect to internet , it asks for "linux-atm-lib" . i don't know how to do that .
I frequently (i.e. after 10-20 minutes of use) get a complete system freeze when using LibreOffice Calc 3.3.3, on Ubuntu 11.04. At the time, I have an *.ods file open, and the freeze happens at various times, for example just after pressing the Page Up button. After the freeze occurs, nothing responds, not even Ctrl+Alt+F1, and I have to force power off my laptop.
how to debug this problem, as there's no error message, no error log (that I know of??)..
I updated 9.10 and system crashed during update and is now unbootable. It seems to freeze (or is just taking a really long time) at fsck. Is there any way to make my computer usable again without reinstalling the whole OS?
So when i initially boot (both using wubi and a usb stick.) it will start to go and then do the alternative boot option with a 5 second count down. Then if I'm lucky it will get passed that then either a black screen with just a flashing _ on it and it will freeze there. Or it will go to the ubuntu opening with the little dots for initial boot and it freezes there. (the dots don't move more then two and then it really freezes.) My specs are i5 750 Nvidia Geforce GTS 250 1.5 TB harddrive ASUS P7P55-M LGA 1156 Intel P55 Micro ATX Intel Motherboard Windows XP home edition 2006 with SP3.
I have an Acer aspire notebook.graded from lucid and now I have a really big problem:every time i disconnect the ac-adapter from the pc, the system freeze completely, became unresponsive to commands and to sysrq. i need to phisically turn off the machine and then back on.
I recently installed ubuntu 10.10 and am completely new to linux. Something I recently noticed is that my whole system will freeze 2 times after logging back in, but after that it works fine. I will log in, then it will work fine, but shortly after it will completely freeze. After about a minute, it will unfreeze and everything will work fine. Then after a little longer, the exact same thing will occur. After the second freeze and unfreeze, it never occurs again until I log out and log back in. I do not believe this occurs when first starting the computer.
I successfully installed Ubuntu 10.04 Lucid on my relatively new iMac 21.5 10,1, but have been unsuccessful in running the upgrade to 10.10 Maverick Meerkat in the normal mode. It appears that the system freezes and/or does not recognize input from either the wireless mouse (aka magic mouse) or keyboard. However, I am able to boot in the recovery/failsafe mode.
I previously attempted to install from a live CD, etc., but the same thing happens, regardless of the type of install I've tried. Has anyone who has had the same problem found a fix to boot in the normal mode?
