Ubuntu :: Open Terminal With Multiple Tabs ?
Aug 16, 2010Is it possible to open a terminal window with a few tabs and execute a separate script or command in each with a single command or script?
View 4 Replies
ADVERTISEMENT
General :: Open Multiple Tabs Automatically?
May 24, 2011I am using ubuntu 10.10. I am practicing for my CCIE. I need to do the following just to speed up myself :-)In ubuntu, while i am in gui (gnome) i want to do the following1) open a terminal window2) open 13 tabs (the ones that we open using ctrl+shift+t)3) on tab1, execute -> telnet 127.0.0.1 20014) on tab2, execute -> telnet 127.0.0.1 20025) so on till telnet 127.0.0.1 2013
View 1 Replies View RelatedUbuntu :: Open Documents In Openoffice 3.2.1 In Tabs Instead Of Multiple Windows
Jan 19, 2011i have a macbook pro with snow leopard 1.6.6 (its Unix based don't look me like that ). my question is about an linux software so thats why i'm asking here (on mac forums nobody answered me) I wanna know that how i can open documents in openoffice 3.2.1 in tabs instead of multiple windows ... (like firefox ?
View 6 Replies View RelatedUbuntu :: Creating A Command To Open Multiple Terminal Windows That SSH Into The Same Server?
Apr 7, 2010Every time I boot up ubuntu I usually open 3 terminal windows and ssh into the same server. I would like to either click a shortcut, or run a single terminal command that will do the equivalent.
I came across the "gnome-terminal" command, but I was unable to get it to trigger an ssh command.
Ideally I would like to have a script that I pass in the number of windows I want to open and the server I would like to ssh into for each window.
Ubuntu :: Mozilla Multiple Tabs Freezeup?
Jun 20, 2009Are any of you experiencing freeze ups on trying to close Mozilla when you have multiple tabs open? A window appears, saying 'Do you wish to save the open tabs' and that is the last thing the computer does.
View 1 Replies View RelatedUbuntu :: Mozilla Firefox Freezes With Multiple Tabs?
Sep 22, 2009I'm still having trouble with the computer freezing if I try to close Mozilla-Firefox with multiple tabs open. (and I often forget to close them individually)Is there a solution to this?
View 5 Replies View RelatedDebian :: Saving Multiple Tabs On Iceweasel 4.0x?
May 17, 2011I'm running Iceweasel (amd64 architecture) version 4.0.1 on Debian Wheezy/Sid/Experimental.My problem is getting Iceweasel to restore saved multilple tables when restarting it. I have done all the obvious things like setting the browser.tabs.warnOnClose, ...warnOnOpen, browser.warnOnRestart, ...warnOnQuit to TRUE. I get a dialogue box when I exit asking if I want to restore my tabs when I restart and I click "Save and Quit" but then when I do restart... no tabs
View 14 Replies View RelatedFedora :: Text Editor With Multiple Views In Tabs?
Apr 27, 2011I want to edit a text file and have it open twice so I can edit different sections without scrolling back and forth. I can do this in Kwrite and Kate but have to have two windows open. Is there a way to do this but with tabs?
View 11 Replies View RelatedSoftware :: Terminal With Scriptable Tabs
May 23, 2009Does anyone know terminal emulator with scraptable tabs? I mean t.e. where you can open several tabs with different content by script.
View 2 Replies View RelatedDebian :: How To Work With Tabs In New Gnome-terminal
Sep 24, 2015After going Debian 8 (with Kali 2) I can no longer use my pre-defined tabs because apparently some genius decided that gnome-terminal no longer needs that kind of functionality (ie. tabs.)I really need my tabs back so I installed a pre 3.11 version that worked with tabs and profiles like this (see below) but that caused other problems.
Code: Select allgnome-terminal --tab-with-profile=Titleable -t "sami" -e "byobu" --tab-with-profile=Titleable -t "root" -e "sudo -i screen -dRRS sami" --tab-with-profile=Titleable -t "samimox1" -e "ssh root@samimox1 -t screen -dRRS main"
Can I install older gnome-terminal side-by-side the "new and improved" version? Or is there a way to get tab profiles to work with the new one?
Ubuntu :: Open Files In Gvim In Tabs?
Jun 10, 2010Is it possible to open text files in gvim in tabs not opening anothe rgvim window for every text file? Just like it is done in gedit: open a file the open another file and it opens in a tab.
View 2 Replies View RelatedGeneral :: How To Get Tabs To Open Up At Top Instead Of Bottom?
Nov 22, 2008Using Konsole on KDE4. How do I get the tabs to open up at the top instead of the bottom?
View 2 Replies View RelatedGeneral :: Get Gnome Terminal Execute Different Commands From Diff. Tabs?
Jan 6, 2010In gnome terminal it is possible to open multiple tabs with Quote:$ gnome-terminal --tab-with-profile=jake_lardasset --tab-with-profile=virtualsexgranny -x alpineWe got even further....Quote:gnome-terminal --tab-with-profile=james_treesexer --command pymol --tab-with-profile=loverboy13 --command alpineand pymol runs, but not in the tab and alpine runs in the tab.The problem is, that when using a script to check mail it has Quote:gnome-terminal --tab-with-profile=chrissypink --command alpine --tab-with-profile=jake_hugerichard -x ssh xxxx@xxxx.ut.eenot the other way aroundIs there a simpler way to do this?And why is it not possible to execute ssh with the --command parameter and -x has to be used ,but top and so on can be executed with --command
View 2 Replies View RelatedUbuntu :: Make Gedit Save Tabs And Open Them When Restarting?
Jan 6, 2011Textpad on Windows did a great job with this. How to make gedit save tabs when closing and reopen the files when restarting?
View 2 Replies View RelatedCentOS 5 :: Setup Tabs To Open Using Ssh_key Passphrase?
May 27, 2009I would like to know how or if there is a how to guide on setting up konsole in KDE to display the server name you are logged into.
Also, how can I set up tabs to open using my ssh_key passphrase without having to enter it in everytime.
In Fedora there is a utility that caches your ssh_passphrase for a limited amount of time, is there a utility like that in Centos?
OpenSUSE :: Firefox Is Slow Opening New Tabs/switching Between Tabs
Mar 25, 2010Firefox is sometimes slow opening new tabs/switching between tabs. If I click on the kickoff application launcher button, it takes a few seconds to open, and typing something in the search makes it hang up for about 20 seconds before it does the search. Clicking on an app takes 16 seconds before the menu window closes and the program begins to start. Then it takes another 30sec-1min before the app is usable. smplayer plays video with tearing.
Like right now I tried taking a screenshot, and it tells me
Error launching /usr/share/applications/kde4/ksnapshot.desktop. Either KLauncher is not running anymore, or it failed to start the application.
while the app worked fine.
I also tried running glxgears right now, and it runs but the gears don't move, and terminal states
15 frames in 19.0 seconds = 0.789 FPS
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
after 48 requests (48 known processed) with 15 events remaining.
If I'm on dolphin, and I click a video to start smplayer, it takes about 1 minute for it to start.
Memory is using 1.4GB out of 3.6GB, with 0.08GB/2GB swap
Top shows an average usage of less than 10% average. Xorg is always 25%, kwin is always 10% and then rest of the apps are less than that.
CPU: AMD Athlon(tm) II X4 620 Processor
Integrated VIdeo: HD4200 with fglrx driver
When I ssh into the computer with x tunneling, the programs start up faster than being on the desktop
Fedora :: Cleaning Up - Make Epiphany Remeber Tabs After Close Browser And Open It Again?
Nov 13, 2009I just moved to Fedora 11 from Ubuntu and I am very happy, not even thinking to go back to Ubuntu (because of gma500 driver support). How can I clean up Fedora? On Ubuntu I could go to Synaptics, remove Installed (not residetial) packages, I coud use terminal sudo autoremove, autoclean, clean. On Fedora I found out only one so far: yum clean all. Is there anything else I should now, can you share with me how you are cleaning up your Fedora? Second thing, which is not only related to Fedora, is there any chance to make Epiphany remeber tabs after I close the browser and open it again? Don't really want to use any other browser.
View 7 Replies View RelatedSoftware :: Retain Multiple Spaces And Tabs In A File By C-sh File Operation?
Feb 21, 2011Iam reading a file using C-sh script after manipulating the variables I need to dump into a new file. This in working fine but I couldn't retain the multiple spaces and tabs in a same line. For readability I want to print it back as I read. Now script treating multiple tabs as onl tab or space.
View 3 Replies View RelatedUbuntu :: Command For "Open A Terminal Window And Run Application In This Terminal ?
Aug 8, 2010What is the command for "Open a terminal window and run application in this terminal
View 4 Replies View RelatedUbuntu :: How To Change Terminal App For Nautilus-open-terminal
Dec 1, 2010I've fallen in love with Terminator as a replacement for the standard gnome-terminal app.
However, I'm also very much in the habit of using the nautilus-open-terminal extension for launching new terminal sessions.
I'd like nautilus-open-terminal to launch Terminator rather than gnome-terminal.
A quick search of my system and the web didn't reveal anything. i didn't find a gconf setting to control this. A quick look at the source code didn't help much either.
Ubuntu :: Create A Command That Will Open Terminal And Keep It Open?
Jul 30, 2010I have a problem that I can't seem to figure out. I can easily create a .sh file that will execute a command in Terminal, but as soon as it executes the terminal disappears. How do I get it to stay? My idea is to have the keyboard shortcut "ctrl+alt+del" open a .sh file with the contents "ps ax". Then it would be just like having a task manager; the terminal would open with "ps ax" already executed, and all I would have to do is kill the process number.
View 5 Replies View RelatedUbuntu :: Multiple Commands At The Terminal?
Jan 21, 2010I am in the process of coverting some video files to motion jpeg (Wii) files with ffmpeg (great program by the way). I have been successful and so the majority of my work is over. My question is simple (I think) but complex to me so... here it goes. Is there a way on one command line to "batch" convert 8 or 9 files together instead of one by one. I just don't know what to put on the command line. I took one UNIX class a long time ago and the terms pipe and such come to mind... but I forget. Any takers? That was I can write what I want the computer to do in the morning and just come back after work and voila...
View 6 Replies View RelatedUbuntu :: Run Multiple Applications In One Terminal?
Apr 6, 2010What do people use to run multiple applications in one terminal?
Thinking of turning my GUI into a big terminal with openbox on top and was thinking, where would I find a command-line timer tool?
And if I only had one terminal, how would I switch between applications? A 5 hour timer isn't nice if it locks up the terminal for 5 hours...
Ubuntu :: Multiple Terminal In Server?
Mar 9, 2011I am using Ubuntu 10.04 Server as my web server. I need to run Kannel for sending SMS. This require two programs i.e bearerbox and smsbox to be run. In case of Redhat I do this by opening 2 terminals. How can I do this in Ubuntu server which has no GUI
View 8 Replies View RelatedUbuntu :: Multiple Instances Of Terminal App?
Jun 25, 2011How can I make it so that I can open multiple new instances of the terminal app by clicking on the corresponding icon? I'm running 11.04 with Gnome 3.
View 5 Replies View RelatedUbuntu :: Adding Multiple Users Terminal?
Jun 1, 2010I want to add users from the command line, I know I can use the adduser for individual users, but if you have 50 or more there must be another way. I'd rather not use the GUI.
View 2 Replies View RelatedUbuntu :: Gnome-terminal -e <multiple Commands>
Sep 1, 2011With xterm, I can do the following, and the scripts are executed sequentially in a single xterm: xterm -e 'script1.sh;script2.sh' But with gnome-terminal, when I do: gnome-terminal -e script1.sh;script2.sh It runs them in parallel in 2 different terminals. I've tried a few combinations of ", and ', around the scrips, but no difference.
View 2 Replies View RelatedUbuntu :: Move Multiple Files And Folders At Once In Terminal?
Jun 27, 2010Is it possible to move multiple files and folders at once in terminal?
View 5 Replies View RelatedUbuntu :: Select Between Multiple Keys From The Terminal With Pgp - Clearsign?
Aug 7, 2010I was trying to sign my Ubuntu Conduct Agreement with the key I created for luanchpad. I have one other key that is used for my private folder. While using pgp --clearsign to sign my agreement it kept using the first key I created for my private folder. My work around was to create an email and then copy/paste using the correct key. how can I select between multiple keys from the terminal with pgp --clearsign?
View 2 Replies View RelatedUbuntu :: Paste Multiple Lines Of Text Into Terminal / Nano?
Jan 24, 2010I'm using GNOME terminal to SSH into a Debian server and would really like a way to paste multiple lines of text into configuration files (using the nano text editor if possible).
So far whatever I try dumps all the text onto a single line meaning I have to manually go through inserting line feeds which is tedious and can introduce errors.
Is there a way to paste text with line feeds intact? Rather than copying each line individually?