Ubuntu :: Open ATI Drivers Can't Dual Screen On An X1900
May 29, 2010
I am having a strange issue with my Radeon x1900 video card. I have two displays, they work just fine under Windows XP - however in Lucid the secondary display goes into power saving mode as X kicks in.
Ubuntu is convinced that the secondary display is alive and working and lets me drag into it and and relocate it, the only problem is that the display remains powered off the entire time.
ARandR is also convinced that the monitors connected to DVI-0 and DVI-1 are powered up and functioning.
The one strange thing I have found is that X seems to believe that there is an S-Video connector on this card - there is not, all it has are the two DVI connectors.
I am wondering if there is something strange going on with the probing of the supposed S-Video port that is turning off the secondary DVI. I suspect this becuase the xorg.0.log shows a line that reads "(II) RADEON(0): Output S-video using monitor section Monitor0"
Perhaps someone knows how I can force this non-existent port out of existence ?
I cannot use the latest ATI drivers that support this card (version 9.3) because ATI haven't supported the current version of X in those drivers - I would also prefer to not to us their proprietary garbage.
I have attached the files that I think might be necessary (xorg.0.log has been trimmed to fit within the 19k file size limit)
View 1 Replies
ADVERTISEMENT
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Aug 27, 2011
I'm attempting to get Debian (Squeeze, latest net-install CD) working on a Power Mac G5 Quad with a Radeon X1900 Mac edition video card (PCI-Express.) The installer acted a bit weird right from the start, telling me that the step "Install the system" failed (with nothing in the way of useful error information,) but I got the base system installed at least. It booted fine to framebuffer console, so I set about installing GNOME on it. apt finished with nary a complaint, but when I rebooted, I found that when it's ready to launch into X, it chokes up and just sits there with a blank screen and a cursor. (Weirdly, though, the screen itself flickers on and off at a high rate, faster than the actual cursor blink.)
Framebuffer console still works, at least, so I was able to boot into single-user mode and do some investigating in my own limited capacity for this stuff (by which I mean "Google error messages and see what specifics are requested.") lspci -k shows the video card properly with the manufacturer and product name, so it is recognizing it, at least. When I try Xorg -configure, though (Xorg 1.7.7, it says,) it aborts with a "No DRICreatePCIBusID symbol" message. Checking dmesg gives me a "process Xorg mapped non-existing PCI legacy memory" message, followed by an "invalid ROM contents" message underneath.
I'm not sure what all to make of this. I've found a thread about problems getting the same basic setup (G5 Quad, X1900, Debian) to work, but it's a couple years old and the symptoms are different. There's some discussion there about the radeon/radeonhd driver looking for Atom BIOS information on non-Atom BIOS cards, which would explain the "invalid ROM contents" message, but on the other hand, if lspci recognizes the card properly, would that be the problem? I don't know. Obviously it's playing nicely enough to run framebuffer console output properly, but beyond that I have no idea. I'd really like to get this working - it'd really improve things over the GeForce 6600 it came with...
View 1 Replies
View Related
Apr 25, 2011
I have a dual screen setup with one card NVidia 8400GS.
Both screen are identical 22" LCD LG W2246 Monitors.
I have Dual X-Display setup.
I am using Gnome Desktop.
The left hand screen displays everything, menus, panels, background and of course desktop launchers.
The right hand screen displays everything except the desktop launchers.
If I create a new launcher on the left it appears on the left desktop when created.
If I create a new launcher on the right it appears on the left and can not be dragged over to the right screen.
View 4 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
Nov 24, 2010
I running 1 pc touchsmart IQ816 (windows7, standalone) and a sunfire server (fedora 14, standalone).Because my touchsmart screen doesnt support dual screen input, i'm reaching my server true vnc. Is there a beter way (VMware?) to handle this problem?Im new in VMware: Can a esxi server from vmware help me out in this situation?
Do some people have experience on this?
View 1 Replies
View Related
Sep 1, 2011
When ever I install the (recommended) drivers through the "Additional Drivers" interface to run Unity my dual monitor setup does not work. The monitors won't even detect correctly what so ever. Then, when ever I install (more basic?) nVidia drivers through the packet manager, my dual monitors work as planned, but now Unity won't work. What's the deal? Are there any work arounds for this?
View 4 Replies
View Related
Apr 22, 2010
I have been testing with the ATI Catalyst drivers. I have made a package from the 9.12. I have found that they were not working the way I want, so i tried to switch back via synaptic. I have removed everything which had to do to "fglrx"
now when I restart, here is the message i get
Quote:
UBUNTU is running in low graphic mode The following error was encountered. You may need to update your configuration to solve this. (EE) failed to load module "fglrx" (module does not exist, 0)
For information, it does start in low graphic mode. I have reinstalled the "fglrx" module, but the problem is still the same. If I reinstall the fglrx drivers from synaptic or terminal, I am back with the newer catalyst driver. I cannot switch back to the ubuntu repository one it seem.
I have done the following to try to get the open source back
Quote:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
sudo apt-get install xserver-xorg-video-ati
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
sudo dpkg-reconfigure xserver-xorg
I still have the same problem. Now I do not have any package installed with "fglrx" I have reconfigured xserver-xorg and it will only start in low graphic mode.
View 5 Replies
View Related
Mar 25, 2010
setting up my dual monitors. I can get a continuous screen but the screen does fill the lcd screen all the way. I have dove in to xorg. I'm on fedora 12 .
[Code]...
View 6 Replies
View Related
Feb 25, 2010
I need a seperate workspace on each monitor and I use nvidia propriatary graphics drivers (I have a Geforce 9500 GT Graphics Card. It has one dvi port and one vga using both for my monitors.) The only problem is whenever I try to save the settings I apply something like twinview or the seperate x workspaces with the second monitor enabled It applys it but this is what happens in sequence (It may be only twinview that does this but i'm not sure not at my home computer right now):
1.) Picture cuts out to a blank screen on main monitor
2.) Pictures turns on in the second monitor (Its a seperate workspace from the main monitor)
3.) 3 to 5 seconds later the picute cuts out to the second monitor
4.) I'm left with two blank screen monitors and no way to turn the GUI back on other than a complete restart of the computer.
I need help on both of these issues. If it helps any one monitor is a CRT (The one on the right) and the one on the left is an LCD (The LCD is the main one). I also have Ubuntu 9.10 32 bit Karmic Koala if that helps. Lastly I have the latest propriatary graphics driver from nvidia (185 I think.) I also installed the driver from nvidia via Jockey (I think thats the name of the default driver installer for ubuntu..?) That is my situation and as you can tell its a pretty complicated one.
View 1 Replies
View Related
May 3, 2010
Now this is a fresh install of Ubuntu 10.04. I have done nothing but follow the steps on installing flash and ati driver from the main site. I have this problem on my desktop too which also has ATI graphics but with a AMD cpu. The desktop was upgraded from Ubuntu 9.10 and the driver installed from ATI site like my laptop. This is really troubling because while the video is in full screen its using over 90% of my cpu?? Then my laptop gets really hot so I just switch back to Windows 7(which only uses 15%). Last time I had this problem was with the FGLRX proprietary drivers on Ubuntu 9.10 with the desktop.
Ubuntu 10.04
Intel Core 2 Duo 2.1GHz
4GB
ATI HD 4650 1GB
video I'm trying watch: [url]
View 9 Replies
View Related
Jan 3, 2011
I dual boot windows 7 and Kubuntu on my laptop, my wireless card works on windows 7 no problem, and luckily the company also has a linux version of the driver. My question is, how can I install packages on kubuntu without a wired internet connection, and what packages should I download to be able to install the driver on kubuntu without getting errors?
My wireless card is Realtek 8192CE.
Here is the download page for the driver, in case I missed something.
I am dual-booting Kubuntu/Windows 7 x64bit.
View 8 Replies
View Related
Jul 14, 2011
I have a HP g6t, previously fully running 11.04. I wanted to root my HTC evo 4g so I decided I *needed* to install windows 7. I created a 20GB partition with gParted, then downloaded and burned .iso of windows 7 my laptop came packaged with (windows 7 home premium 64-bit). However, after installing, Windows now refuses to recognize ANY of my network drivers. This means my ethernet connection (was plugged in during set-up) as well as my wireless card.
Stats via lspci:
Network controller: Ralink corp. Device 5390
Ethernet controller: Realtek Semiconductor Co., Ltd. RT8101E/RTL8102E PCI Express Fast Ethernet Controller (rev 05)
View 1 Replies
View Related
Jul 12, 2010
I have been trying to get sound to work through the open source HDMI drivers, does anyone know how to do this?
I get a perfect picture through HDMI but no sound. The ATI HDMI option is not muted and is enabled. I dont know what else to do. I opened a terminal and did "aplay -l" and I can see the device in there. I DO get sound using the proprietary drivers supplied by ATI, but I get screen tearing and makes the picture look horrible.. So for now its Sound vs Picture quality... Why cant I have both :/
View 2 Replies
View Related
Mar 13, 2011
I have an ATI Mobility Radeon HD 5000 series (I believe 5470, but I forget). I installed the open source ATI drivers using instructions at https://help.ubuntu.com/community/RadeonDriver. Wonderfully, this gives me triple monitor support (LVDS, VGA, and HDMI at the same time), which the proprietary drivers couldn't do for me. But now I don't have 3D support (and XBMC crawls horribly as a result.) glxinfo shows me I have software rendering:
Code:
$ glxinfo | grep OpenGL
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.9-devel
OpenGL shading language version string: 1.20
OpenGL extensions:
View 1 Replies
View Related
Apr 3, 2011
I have an ATI Radeon 4200 HD Mobility, with 256 MB of my RAM dedicated to it. I installed FGLRX, but the performance actually dropped compared to the open source drivers that come installed by default. I removed fglrx, and reinstalled the Radeon packages, but no avail.
Now, when I boot, I get the error, "unable to load module 'fglrx'," and my only option is to run Ubuntu in Safe Graphics Mode. This tells me that the computer is still trying to load FGLRX, and there's something that needs to be altered down at the boot level.
View 6 Replies
View Related
May 23, 2011
As far as I can tell, I have the proprietary AMD drivers installed.
I want to install the open source drivers instead to see if I can get better performance.
According to this site, I have to install the PPA to my software sources as instructed here. I've done that. But how do I actually install the open source drivers?
View 9 Replies
View Related
Aug 5, 2011
In a nut shell, I have a program called OpenSim which is a 3D virtual world emulator. My ISP provides me with dynamic DNS so I have written a program that compares my external IP to the IP in a file called Regions.ini that OpenSim uses to go out to the Internet. If the IP's are different then I need to change the entry in the Regions.ini file and reboot OpenSim. The program works except for the fail safe I put in in case OpenSim crashes during shutdown which happens one in a while.Here is the code:Quote:
#!/bin/bash
EXCEED_TIME="N"
SERVICE='mono'
[code]...
View 1 Replies
View Related
Jun 7, 2010
I am trying to install nVidia drivers on CentOS 5.4 and it is requiring kernel-source
# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
For the installation of kernel source, I have followed the steps on [URL]. I followed the steps under 2.1 and they worked for me. Now what can be done for the installation of the kernel-source package. When I am trying to install nVidia drivers, I am getting error, following are lines from installation log of Driver.
-> Tagging shared libraries with chcon -t textrel_shlib_t.
-> License accepted.
-> Installing NVIDIA driver version 185.18.31.
-> No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site; this means that the installer will need to compile a kernel interface for your kernel.
-> Performing CC sanity check with CC="cc".
-> Performing CC version check with CC="cc".
ERROR: Unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL]. I want to install driver.
# rpm -q kernel-
kernel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-devel
kernel-devel-2.6.18-92.el5
kernel-devel-2.6.18-164.15.1.el5.centos.plus
kernel-devel-2.6.18-194.3.1.el5
kernel-devel-2.6.18-194.3.1.el5.centos.plus
# rpm -q kernel-source
package kernel-source is not installed
The nVidia Driver I am installing is:
NVIDIA-Linux-x86-185.18.31-pkg1.run
# uname -a
Linux harvey 2.6.18-194.3.1.el5PAE #1 SMP Thu May 13 13:48:44 EDT 2010 i686 i686 i386 GNU/Linux
Only reason to install the proper driver is to use dual monitor.
View 6 Replies
View Related
Apr 5, 2011
Using Ubuntu 11 64 bit. I tried to install a netgear driver, it didn't work so I deleted it, now every time I try to run Wireless Network Drivers the program hangs and I can't do anything with it. I have to force quit. I have removed and installed it a few times now to no avail.
View 1 Replies
View Related
Jan 22, 2010
How an I tell gnome (using a script or setting in compiz settings)to only open application X on screen 1 and have it work from screen 0? example: I have nvidia dual/seperate screens runnig so I have screen 0 and screen 1 I cannot drag a window from one screen to the other I want to launch a program from screen 0 and have it open on screen 1
View 4 Replies
View Related
Mar 15, 2011
I have openSUSE 11.4 with standard KDE and two screens attached.Here's the question: How do I configure dual monitors when using the proprietary nVidia drivers?The openSUSE 11.4 installation put in the "nouveau" drivers for my nVidia card and I was able to configure dual monitors using KDE's Configure Desktop --> Display & Monitors GUI configurator. I could also set up dual monitors using a script based on xrandr (e.g. "xrandr --output VGA-1 --auto --pos 0x0 --output DVI-I-1 --auto --pos 1920x0")My screens are detected as VGA-1 and DVI-I-1 by the nouveau drivers.
OK, today I switched to the proprietary nVidia drivers. Only one of the screens is now detected and displayed in the KDE monitor configurator and that's marked as "default" rather than as a VGA or DVI connection.When I run xrandr to configure monitors, I get error messages if I refer to VGA or DVI hardware.
More info -- RPMs
nvidia-gfxG02-kmp-desktop-260.19.36_k2.6.37.1_1.2-23.1.x86_64
x11-video-nvidiaG02-260.19.36-24.1.x86_64
[code]....
View 7 Replies
View Related
Aug 3, 2010
A friend of mine is looking for a cheap PCI graphics card to do TV-out from his PCI only PC for MythTV duties. We've found cheap old PCI Radeon 9200's with TV Out on eBay. These appear to only be supported by the open source drivers now, but will the TV out work with the open source drivers?
View 3 Replies
View Related
Jul 8, 2011
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
View 2 Replies
View Related
Mar 1, 2016
I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)
Im tried to do it like this page says: [URL]....
However when i try to Code: Select allapt-get update he throws an error:
W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)
View 1 Replies
View Related
Sep 9, 2010
any idea if openSUSE will be able to get this into 11.4?Broadcom swims upstream, tackles Linux WiFi woes with new open drivers
View 1 Replies
View Related
Jan 2, 2010
I just installed Ubuntu 9.10 and at some point I realised that the Update manager application will not open when I click on it the hard drive spin a little but nothing happens.I realized that the Software sources et Hardware drivers apps are in the same states. I was not able to see after what operation/installation I did that I they stop working.I am a beginner with Linux, and I feel that if I reinstall I will fall into the same hole .
View 8 Replies
View Related
Feb 21, 2010
I'm running a Squeeze system on a PC with an ATI Radeon HD 4200 graphics card. Until recently I had been using the fglrx drivers without difficulty, but a recent upgrade removed fglrx - apparently this is because ATI has yet to release drivers for Xorg 1.7. So I've switched to the open source driver (radeon), but am not getting any 3D acceleration - hence can't run desktop effects in either kwin or compiz. When I run "glxinfo | grep OpenGL" I get the following:
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.6.1
OpenGL shading language version string: 1.20
OpenGL extensions:
It's the software rasterizer that is the problem, I gather. After Googling for similar problems encountered by others, I've installed firmware-linux and firmware-linux-nonfree, but to no effect. All fglrx-* packages are purged. Does anyone have any other thoughts? (I don't currently have an xorg.conf file in use.)
View 10 Replies
View Related
Sep 10, 2014
My questions is about switching graphics card on a Intel/AMD hybrid system using open source drivers (Envy 15 with HD4000 and AMD 7690M). I was waiting for an proprietary driver from AMD but apparently it will not be released in the near future and I need to use AMD chip for my 3D intense applications.
View 0 Replies
View Related
Sep 11, 2015
The ATI/AMD graphics hardware is:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570 / R7 240 OEM]
I installed "AMD/ATI Open Source Drivers" according to: "[URL] ....":
Reboot after "apt-get install firmware-linux-nonfree", the system automaticly reboot after grub, then went black screen forever (no tty1,tty2.., seems cannot booting). I reinstalled serveral times but same problem (having tried both cd/live dvd, debian8.1/8.2).
It seems that "firmware-linux-nonfree" is the cause, since debian crashed once firmware-linux-nonfree installed.
The problem went away by installing ATIProprietary driver("[URL] ....").
PC is dell 9020, i7
View 6 Replies
View Related
