I was happily browsing my new Linux Ubuntu Distribution, and a warning message popped up stating that there's about 145 megs in FIle System. how to solve this problem other than removing files?
View 2 RepliesI am dual booting Ubuntu and Windows 7, I have just shrunk my windows partition and would like to add that extra space to the file system partition. I installed Gparted but it told me I need to unmount the file system partition manually. I would like specific instructions on how to do this,
View 9 Replies View RelatedI have a 6x1TB RAID5 set up for testing on ubuntu created with mdadm and formatted with an ext4 fs.
This is being shared over CIFS for windows clients. When looking at the fs from both the file box and the clients, it says 4.47TiB total capacity, and 4.24TiB free space. The only folder is Lost+Found which is empty.
I don't have much experience in Linux filesystems as of yet and I don't understand where this 300 gigs has gone!
Is it something to do with journaling?
The root partition on my server seems to be full. I'd like to find out what files are on that partition and only that partition so I can free up some space on it.
Filesystem Size Used Avail Use% Mounted on
/dev/hda5 7.8G 7.8G 0 100% /
/dev/hda8 84G 33G 47G 42% /home
/dev/hda6 996M 43M 902M 5% /tmp
[Code].....
So how do I find out what I can remove to free up some space?
I'm getting an error message that something along the lines of "volume "filesystem root" has only 25mb space remaining". How do I increase the volume size so I never have to worry about it again? This is the 3rd time I've tried ubuntu and it's sticking more and more but this has me thoroughly perplexed. I've got a 320GB HDD partitioned 3 times with a Linux partition being 7GB.
Dual booting Win7Pro.
Running ubuntu 10.10 64-bit
I am running a dual boot system with Win7 on /dev/sda and Ubuntu 10.10 on /dev/sdb
I also have a 250 GB disk I use for storing backup data, /dev/sdc
The two logical partitions on /dev/sdc (/dev/sdc2 and /dev/sdc5) each take up 2.86 GB and I would like to free up that space if possible.
Since the filesystem on /dev/sdc doesn't have an OS on it, does it still require that those two logical partitions exist?
I am not sure whether this is something that can be answered here, but I figured this is the best place to start (next to google not giving me the answer I was looking for). One of our clients are running HPUX as filesystem, however when the support guys need to report the filesystem space they keep getting it wrong. Even after someone gave them the full command which will do the calculations for them, they still seem to make mistakes. On linux the df -h works very weel but this is obviously not available here...can use to display the filesystem space in the correct formats? Even if there is a set of commands that we can work into a script and they can then just run the script.
View 1 Replies View RelatedI'm running CentOS 5.2,on a 64-bit x86_64 Linux machine with kernel version 2.6.18-128.el5 smp. I appear to have version 2.9.4 of xfsprogs. I have a 22TB xfs filesystem ,Yesterday, the hard disk is full, today released a 7.7T disk space.But still can not write to new file. software ambience:
[root@Production data5]# uname -a
Linux Production 2.6.18-128.el5 #1 SMP Wed Jan 21 10:41:14 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[code]....
I recently installed Bio-Linux 5.0 as a dual boot system with XP for some bioinformatics applications, but Im having some problems with the amount of disk space which can be allocated specifically for the Ubuntu install.
I partitioned a 250 GB portable hard drive into:
/dev/sdb1: 154.76 GiB (with 30 GiB allocated for Ubuntu)
/dev/sdb2 : 78.13 GiB
Ive been using blastclust to analyse some very large data sets, which keeps on crashing due to filesystem running out of disk space.
When I installed Bio-Linux 5.0 from the live cd, the maximum size I could allocate to the install was 30 GiB, and I havent been able to find a way to change this.
Ive tried using System->Administration->Partition Editor using the live cd, and can view / delete the partitions, but I cant find a way to specifically alter the disk space allocation for Ubuntu.
How do I increase the filesystem size to larger than the current 30 GiB?
Original disk:
XP NTFS primary
Linux / ext4 logical
Linux /home ext4 logical
Win 7 NTFS logical
NTFS data logical
swap space
NTFS recovery partition
I tried to install linux, as there was a problem with XP overwriting grub, I chose write grub to /dev/sda8 (which is where the linux install was appearing earlier).
I guess this borked the filesystem somehow. Now the NTFS data partition and the swap space are appearing as one free space.
Well actually before that some linux live CDs (including gparted were seeing the entire drive as unpartitioned). I had to go into XP and delete the /ext4 partitions.
Is there any way for me to recover the NTFS data partition ?
When I logged in today I got this message:
The volume "filesystem root" has only 474.8 MB disk space remaining
What does this mean??
I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
Logical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
I have a following problem: Recently my drive with Ubuntu 9.4 has mysteriously stopped working, i.e. when I switch the computer on it informs me that GRUB didn't find the filesystem. Well, I suppose it happens.
First, I though it was due to the drive dying, but I popped it in an external enclosure and HDTune told me the drive was fine. Wanting to recover the files on the drive before reinstalling I first tried to mount it in said external enclosure under Windows (I have Win Ext2 driver installed which used to work just fine). This time, however, drive gets assigned a letter but upon opening it Windows popped up an error saying that the drive was not formatted and whether I would like to format it then.
Unfazed by this streak of failures I tried to mount it under Linux but, alas, to no avail. I might have tried every single -t operator under mount command but it still won't budge and let me mount.
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
I am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
I've had a look at some similar threads but as I'm very new to linux they're already a bit technical for me. Sorry, this calls for someone with patience. I gather from other threads that disconnecting an external drive without unmounting is a no-no, and this seems to be the likely cause. Now the disk is read only and I'm unable to change any settings through the usual control panel on ubuntu. I'm just not familiar with the terminal instructions. I tried to cut and past a few command lines from other threads but I got some warnings that proceding could damage data. Like this one: WARNING! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage.
View 5 Replies View RelatedI have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies View Relatedi used gddrescure to clone an 80gb harddrive and this is the result ROFL.i guess you can only do this making sure the target drive is the same size, you see i didnt know lol so..i now have THIS problem.can anyone tell me how to turn my unallocated space into a usable 'free' space? i could play with gparted right now but i dont wanna do anything wrong, so if theres anyone who can tell me how to do this.
View 1 Replies View Relatedi made space by shrinking my window partition and so i have unallocated and would like to add to sda2 to have more space. Check out this pic. How can i do this?
View 1 Replies View RelatedI installed Ubuntu 10.10 with wubi and i have been enjoying my Ubuntu experience a lot. I installed quite a bit of programs and spent a couple hours customizing my machine. The problem is im running out of disc space. Any ideas on how i can add more space. I have gparted but i dont know where to move the free space to because wubi installed it.
View 1 Replies View Relatedmy home partition is an extended one, and when i want to create an unallocated space the space will stay in that extended partition. but there is also an 7 gb unallocated space which i want to merge with the other unallocated space. I also cannot extend that partition over that 7 gb. how can i overcome that problem?
i m also uploading a screenshot of gparted.[URL]..
I am developing a I2C CDROM client driver. The CDROM firmware supports TOC information read through a I2C command. It sends the TOC information in burst ( Interrupts a GPIO pin when it is ready ) and my CPU does a I2C read to read the TOC. When the CDROM firmware finishes sending the last data burst , it informs my CPU that it is done with the TOC, by a flag in the last data burst. I would like to know, which is the most efficinet way I can send these TOC information to userspace?
View 4 Replies View RelatedI am writing device driver in which i have to call callback function from kernel space, which are saving my data. But the callback functions are in userspace. While accessing them i am getting segmentation fault.
View 1 Replies View RelatedI wanna write a file in kernel space but from my searching I can to know that instead of writeing file in kernel space ,I can write data to user space by copy_to_user space.
But link is missing ...I dont know how will my user space will access kernel space means my function in kernel space which will do copy_to_user /....How my user space function will call my kernel level function ..
Can any one of you provide me with some example file which are doing this .I know every char driver is using it ...but i could not trace back how user level function is accessing it ...i m confused between user space and kernel space.
Today I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
How to use execv from kernel space to call a user space program writtenfor socket prog.
I tried to write code for socket in kernel but its not working.
Socket code in kernel is also needed.
I was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies View RelatedOS: RHEL AS 5 64-bit
HDD:300 GB Hardware mirror (HP blade bl460c)
While installing OS, in partition window after OS file system structure I've left 277 GB. But after installation it shows Size - 255GB and available disk space is 242 GB.
Isn't it weired? How can I use the total amount of space in Linux? I need the whole 277GB exactly. What should be my workaround?
I have a list of files in a directory which starts with - or have space.
I need to copy them back without the space or -?
linux1[sim]% ls linux1[sim]% cp ./-* ./*