Software :: Space Missing From Ext4 Filesystem Ubuntu 10.10
Dec 26, 2010
I have a 6x1TB RAID5 set up for testing on ubuntu created with mdadm and formatted with an ext4 fs.
This is being shared over CIFS for windows clients. When looking at the fs from both the file box and the clients, it says 4.47TiB total capacity, and 4.24TiB free space. The only folder is Lost+Found which is empty.
I don't have much experience in Linux filesystems as of yet and I don't understand where this 300 gigs has gone!
Is it something to do with journaling?
View 2 Replies
ADVERTISEMENT
May 6, 2011
I am running a dual boot system with Win7 on /dev/sda and Ubuntu 10.10 on /dev/sdb
I also have a 250 GB disk I use for storing backup data, /dev/sdc
The two logical partitions on /dev/sdc (/dev/sdc2 and /dev/sdc5) each take up 2.86 GB and I would like to free up that space if possible.
Since the filesystem on /dev/sdc doesn't have an OS on it, does it still require that those two logical partitions exist?
View 8 Replies
View Related
Apr 16, 2010
am having issues with a corrupted ext4 filesystem. My machine has run flawlessly for weeks, then all of a sudden I am getting messages that I can't access various directories, and on reboot fsck dumps to a command line. So far I have been able to fix the problem by manually running fsck. However, this is the second time that I have run into this problem; the previous time I ended up throwing out my hard drive and doing a clean install.I am running a clean install of Karmic Koala, software RAID, 4 Gb RAM, two 500 Gb Western Digital SATA drives, with an Intel E7200 2.53 Ghz dual core processor.Among other applications, I run VMware 7.0 for the occasional task for which I need a Windows program.
View 1 Replies
View Related
Apr 30, 2010
I run an upgrade and an update on a lucid lynx beta 2. --- got no problems. but about the filesystems i have some questions because it seems for me that at every system boot the system will run an fsck. somtimes it's shown up, somtimes not. but in /var/log/messages and in syslog
I have always following messages ( occured in beta 2 too ).
But first before i continue - here my disk layout:
And here my filesystem types:
This is my problem because those values are seems to be static ! ( note: this partiton is mounted but not in use ) and last not least: the drive is an external usb scsi disk. but on the other side lucid lynx is running fine on my box.
View 3 Replies
View Related
Jul 24, 2010
During the installation of Ubuntu 10.04 the partitioner was wrongfully configured to see a functioning btrfs partition as ext4 (without reformatting it). Thus the installation process got stuck at 5%.Installer was run again ignoring the btrfs partition.btrfs-tools was added to the new 10.04, but the btrfs partition is now recognized ast4 with lost+found folder on it.Tried to add the btrfs to etc/fstab as btrfs but t won't mount.Can the partition/filesystem type be changed so that this is actually recognized and mounted as btrfs, hoping my data is still on it somehow?
View 9 Replies
View Related
Aug 20, 2010
Is there an Ext4 filesystem driver for windows?
View 9 Replies
View Related
Oct 5, 2010
I have recently updated my ubuntu 9.10 install to 10.04. And with that I've tried to install snow leopard on my computer so i can dual boot between them.the install was successful, but grub2 (that worked fine) wouldn't see the OS X install on its own partition. so i tried reinstalling it, like you do after you install windows and it would remove grub as the bootloader.That didn't work and i got a lot of messages that it wouldnt work because my partitioning (or something like that) is GPT. by the end of it i didn't have grub installed at all!so i started playing around with GParted, and while doing that i also put a bios_grub flag on my main ubuntu install partition, thinking that it would force grub to load from that partition. But that just gave me the GRUB Rescue prompt when trying to boot.
So i unchecked the bios_grub flag. and now it doesn't boot to anywhere and when inserting the ubuntu live cd i cant even see the ubuntu ext4 partition and mount it.Gparted says that its a partition that its File System is undetectable and unknown.Is there any solution that will allow me just to mount that partition and copy files from it? (unfortunatelly my backups are a little older than i would like them to be)Heres what boot info script gives me: (the partition that i need is sda1)
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 4 Replies
View Related
Aug 18, 2011
I want to install 11.04 next to my working 10.04 system. First I need to make room for the new system so I have booted from a live cd and started GParted. In GParted the partition with the 10.04 system on it, /dev/sda1, has a red circle with an exclamation mark in it and I cannot resize it. When I doubleclick on /dev/sda1 there is the following warning
Quote:
Failed to change to directory '.'(Stale NFS file handle)
Failed to change to directory '.'(Stale NFS file handle)
Unable to read the contents of this file system!
Because of this some operations may be unavailable.
The following list of software packages is required for ext4 file system support: e2fsprogs v1.41+.
The 10.04 system is working and has worked like a dream for a couple of years and the machine has never had any other system on it. Why would the live CD not be able to read ext4 fs?
View 4 Replies
View Related
Jun 30, 2010
I'm resizing an ext4 partition from 100gb to 40gb (I only used 20gb of it or so). Lets say partition is at /dev/sda1. I used
Code:
efsck -f /dev/sda1
to check it
Then I did
Code:
resize2fs -p /dev/sda1 40G
to resize it
When I check fdisk -l, the partition is still 100gb. I have a feeling I resized ONLY the filesystem to 40, but the partition is still 100gb. How do I finish this?
View 9 Replies
View Related
Apr 19, 2011
On this LAN we have: Windows 7 desktop, 192.168.1.2 Ubuntu 10.04 desktop with ext4 filesystem, 192.168.1.5
On the Windows 7 system, how do you mount a Ubuntu "/home/myHomeDirectory" (ext4 filesystem) as "drive U:" ?
So that U: => 192.168.1.5:/home/myHomeDirectory One possibility is a commercial product called ExpanDrive.
View 1 Replies
View Related
Mar 18, 2011
Is there a way that I can use my Linux ext4 file system, as such and then use it on some other computer.I have a dual-boot of Windows 7 and Ubuntu 10.04 and my partition table looks like this:My question might not be clear, so explaining it with an example.Can I copy my Linux partition on a flash drive and then use it on a different PC, with or without any need to install Ubuntu on new PC, by simply booting from the copied ext4 partition.This way, I can easily port my Ubuntu packages and other applications, settings etc. from one PC to other
View 1 Replies
View Related
Mar 6, 2010
I need to examine a hard drive that came from another system running Ubunut Server (not sure what version). I know the drive has LVM on it, so as far as I understand that means the drive will be treated as EXT4 for mounting. I can't boot from the actual disk, but I have used a IDE to USB connector to make a binary copy of the drive, which I've mounted as a loopback device. However, when I try to mount the loopback device properly, I get this:
root@~je:/# mount -o ro -t ext4 /dev/loop0 /mnt
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I tried using -t ext4dev too, but that just gives an unknown filesystem error. The file I've got mounting in /dev/loop0 is a .dd file, created by imaging the drive using dcfldd on the server drive while it was mounted (as /dev/sdb). System I'm working on is running Ubuntu 9.10. All I need is to be able to mount the server drive so I can traverse the file directories, there's a few things I need to check on it. If needed I can dispense with the whole loopback setup and just directly connect the server hard drive again using the IDE to USB cable, but I'd rather not do that; it's imperative that the drive doesn't get altered, or at least as little as possible.
View 5 Replies
View Related
Dec 15, 2010
I want to add unallocated (17.94GB) to ext4 (ubuntu). Is it possible? And how to do this?
View 4 Replies
View Related
Apr 30, 2010
I'm wondering if anyone knows what will be Squeeze's default filesystem. Will it be the proven ext3 or the newer (sometimes faster, sometimes slower) ext4?
I currently have ext4 and I have nothing to complain about. In fact, my overall experience has been very positive. Ext4 is definitely faster when fsck runs during boot.
What would be the cons of having ext4 as default in Squeeze?
View 3 Replies
View Related
Jun 3, 2009
will it be possible to convert existing filesystem to new ext4 while upgrading from Fedora 10?
View 1 Replies
View Related
Aug 5, 2011
On my drive I had 2 partitions for an Ubuntu 9.04 (swap, /) and one partition for Windows. I figured out that I should upgrade my Ubuntu, so I deleted the "/" partition and in its place created 2 new partitions (/, /home) .
After installing the latest Ubuntu 11.04, I realised that although I had backuped everything I needed in a 2nd disk and I could access those folders and their data from my Ubuntu 9.04, both my Windows and the 11.04 can locate neither the folders nor the data now. I have no idea why this happened (perhaps some issue with the mounting?) I have tried the trial version of Stellar Phoenix linux data recovery tool, but it cannot locate the old partitions.
View 2 Replies
View Related
Jan 31, 2011
I have installed ubuntu to my pc. i made 3 partitions. one for system, one for data and one for swap. two of them were ext4. after some time i have reinstalled ubuntu again. but this time i didn't put to format the second partition, but just mount it using ext4. after that i cannot open my files. checked with gparted shows that 2GB used, but with df 188MB. and in properties writes ext3/ext4 filesystem. i used chown, chgrp but didn't help. please help, these data are ver important. i cannot lose them.
View 7 Replies
View Related
Jul 11, 2010
I've just bought a new SSD hard drive:Kingston SSDNow V-Series SNV125-S2/128GB 2.5'' 128GB SATA/300The question is which filesystem whould you recommand and why?BTRFS vs NILFS2 or EXT4?If you choose ext4 would you enable jurnalling?I'm very close to choose Btrfs.Any experience with running any of these on your SSD?
View 7 Replies
View Related
Jan 4, 2010
according to the system manager of my machine, one of my ext4 partitions (home folder) reads 7.6GB free but only 574MB available and the disks "fills" when the 574MB are used, and i'm really needing those 7G right now, so:
why does this happen? are those 7G used in anything? any way to allow the system use that free space?
View 9 Replies
View Related
Jul 20, 2010
I am running Ubuntu 10.04 amd64. So I have just returned from a week vacation to see that my / is full. When I had left, the ~80G partition was only consuming around 40G of space. I feel like this is a bug and i haven't tried a custom kernel yet to see if it is kernel level. Here is all the good information though to help debug:
Code:
mount
# mount
/dev/mapper/pdc_cfefedbci3 on / type ext4 (rw,noatime,user_xattr,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
[Code].....
I am using a fakeraid with dm-raid on a raid0 for my /dev/mapper discs. I just wonder if anyone else is getting this error or if it is a problem with ext4.
View 5 Replies
View Related
Sep 9, 2010
I used gparted to format a 360GB partition with ext4 and I expected it to have at most several hundred MB used for whatever reason by the file-system, but it said 18GB were used. How come? Are there any file-system settings I should have paid attention to?
View 6 Replies
View Related
Jun 11, 2009
Is that possible, I mean when I upgrade F10 to F11 with yum upgrade is there a way to 'upgrade' the filesystem to ext4 for example (with the exception of boot partition)? Or I have to reinstall fedora like new?
While changing the filesystem can I do it by parts? what I mean is for example: I have 2 partitions like '/' and '/home' with ext3, so I backup data in '/home', change '/' to ext4 then mv files from '/home' to '/' and change '/home' to ext4 and finally mv those files from '/' to '/home'. Is that possible?
View 2 Replies
View Related
Nov 20, 2010
I clean installed Ubuntu 10.10 by shrinking my Windows 7 partition slightly. Now that I want to expand my Linux partition, I shrunk my Win 7 partition from Windows OS. From Ubuntu, the partition manager shows /dev/sda1 contains the Win 7 and unallocated partition. /dev/sda2 contains the Linux and swap partitions. I can't seem to expand my Linux partition (ext4) in sda2 with the unallocated space in sda1. I also can't shift the unallocated space in sda1 to sda2. Any idea how to expand my main Linux partition with the unallocated space?
View 4 Replies
View Related
Feb 5, 2010
i am trying to compile kernel 2.6.23 on Fedora 12 After fixing a few bugs (getline error, %dil ,etc) i was able to compile the kernel made initramfs img using dracut updated grub and then booted up the new kernel 2.6.23 but it fails to boot with following error mount: unknown filesystem type 'ext4'
View 8 Replies
View Related
Jun 24, 2011
I am running CentOS 5.5 with a 14T ext4 volume. We are sharing out a few sub-directories via NFS. Our customer was doing some penetration testing with our web app that writes to one of those NFS shares. We are not sure if they did something to cause the metadata to grow so large or if it is corrupt. Here is the listing:drwxrwxr-x 1 owner owner 470M Jun 24 18:15 temp.badI guess the metadata could actually be that large, however we have been unable to perform any operations on that directory to determine if the directory is just loaded with files or corrupted. We have not run an fsck on the volume because we would need to schedule downtime for out customers to do so. Has anyone come across this before
View 2 Replies
View Related
Feb 9, 2010
I have been having problems with filesystem corruption on my eeepc 1000H for a long time now. I have tried using different filesystems, kernels and distributions (arch, slackware) to no effect. I am starting to grow suspicious that this problem lies somewhere else, as I haven't seen anyone else having similar problems in such a variety of scenarios.
I have tried testing my ram using memtest86+, didn't come up with anything after a full run through. I also have tried using e2fsck -c to check for bad blocks, it finds none. I had a go at using smartctl but wasn't really sure what I was doing. I did a long test and it came up with nothing anyway.
This problem is in addition to the problems I've been having with my intel graphics chip and KMS. A lot of the time there are lockups when booting into X, which can only be gotten out of by a hard reset. This is sometimes what causes the original filesystem errors. I've stopped messing around with KMS for now to eliminate this but my current system in unbootable. I'm guessing my disk is wrecked but have as yet seen no definitive proof. Can anyone recommend anything that I should do?
I am currently on ext4 with a custom kernel 2.6.33-rc6 (the stock kernel shipping with slackware does not have the elantech extension for psmouse included). When I was using arch, I was just using the stock kernels.
View 9 Replies
View Related
Mar 1, 2010
My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb
So I resized my partition by using these steps:
Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2
But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.
View 1 Replies
View Related
Jun 24, 2010
I was happily browsing my new Linux Ubuntu Distribution, and a warning message popped up stating that there's about 145 megs in FIle System. how to solve this problem other than removing files?
View 2 Replies
View Related
Jan 15, 2010
I added an ext4dev filesystem to my hard drive as /dev/sda3 and mounted at /share with the goal of putting all of my multimedia files on it and sharing it through NFS. I followed this guide: [url]
Of course, this was from lenny (hence the -dev). The partition was fine, and I mounted it numerous times. I also performed a dist-upgrade to squeeze. I shutdown that computer with the usual 'shutdown -h now' and disconnected the AC power cord from it, because I wasn't planning on using that machine for awhile. As far as I could determine, everything was fine before I unplugged it.
Every time that computer is powered off, the clock resets to 1999 because the battery is bad. So I am used to getting the "last mount time is in the future" error.
Three weeks after halting, I powered the computer back on. It was unplugged until this point. I got an error message when it attempted to mount /dev/sda3
I then removed its line from /etc/fstab, rebooted. and tried to check it, but I just keep getting the same error-- even with the '-b 8193' option.
The machine is still using the 2.6.26 kernel from lenny. I am building a new one right now (2.6.30), hoping that the problem is caused by the ext4dev/ext4 module. Otherwise I don't know what to do.
View 14 Replies
View Related
Jun 12, 2011
I have just purchased a 2TB drive for my server and I was trying to get an idea of the differences between these file systems or other file systems out there. What is the amount of space after formatting for ext4, ext3, and ntfs?
View 4 Replies
View Related
