Ubuntu Networking :: Setting Up ISA NIC On An Old Machine?

May 20, 2010

Somebody gave me an old Celeron 333MHz system w/ 96 MB RAM and I thought I would set it up as a little torrent server. So I installed Ubuntu server on it, but it does not see the NIC. I know the NIC functions because the person was using it hooked up to a network until a few days ago. Unfortunately, it's an ISA-based NIC and not PCI and my understanding is that I have to pass it IRQ and DMA settings to get it to work. Unfortunately, I wiped the windows 98 partition without thinking of snagging those settings. First of all, lspci does not show the hardware AT ALL. Here's the output I get:

Code:

00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03)
00:04.0 USB Controller: OPTi Inc. 82C861 (rev 10)

[code]...

The machine is an old 'Compaq Presario 5050' with a really crappy BIOS that doesn't really offer any help. I read a post somewhere that trying to load the 'ne' driver should work, so I tried:

sudo modprobe ne

and it came back saying "no such device".

View 6 Replies


ADVERTISEMENT

Ubuntu Networking :: Setting Up And Old Machine As A Firewall?

Oct 12, 2010

I have installed Ubuntu 10.04 Server on an older desktop with the intent of making it into a firewall box. What I would like to do is hook one nic into the modem, and the other nic into my router. I'm not sure if I want to setup the 2 nics as bridged.

View 1 Replies View Related

Networking :: Setting Up A Mail Notification Nagios On A Ubuntu Machine?

Feb 11, 2011

I I'm currently working on Nagios Core 3.2.2, and I'm trying to set up a mail notification. I already install postfix and mailx. And I'm able to send a mail via Ubuntu. I checked this with the command: echo "mail test" | mailx -s "test subject" mail address.But I don't know what to do next. I'v tried many different suggestions that I found on goolge, but nothing seems to work.

View 26 Replies View Related

Networking :: Packets Not Routed Properly After Setting Up Machine As Router?

Aug 13, 2010

I have three machines say A B and C. I want to make machine B as a router for A and C, so that the ping packets from C to A should be going via B. I have directly connected two interfaces(eth4) of A and B and similarly two interfaces(eth5) of B and C. I have even set up a route between B and C. 1. But I am not able to set a route between B and A.2. If I ping A from eth4 of B(viceversa) it works. When I ping B from eth5 of C it work but not the viceversa.3. Also, if I ping from C to A, B receives the packets, but not A.

View 3 Replies View Related

Ubuntu Installation :: Setting Up Triple Boot Machine?

Apr 29, 2010

I i'm having trouble setting up my triple boot machine. I have Windows 7 and Mac OSX on two seperatate hard disks and they are dual booting fine with the chameleon bootloader. I just attempted to install ubuntu from liveCD which i downloaded and burned from the ubuntu website. During intallation i the option to "install side by side to windows" and resized the windows partition to make room for Ubuntu(250GB of 1TB), i also selected the option to disable the GRUB bootloader because i want to use chameleon. The installer completed successfully and the computer rebooted but chameleon, Mac OSX or windows (my partition for windows is 250GB smaller) won't recognize the partition.

View 2 Replies View Related

Ubuntu :: Setting Up Remote Administration On A Distant Machine?

Oct 30, 2010

I'm try to assess the viability of of setting up remote administration on a distant machine. Just for background, the computer I wish to administer is located on a boat in Southern Ireland while I'm in SE England. Sadly, the the boat operator is a far better fisherman than computer user and every now and then some rogue sensor numbers get captured by the boat's computer and these eventually need operator intervention. Anyone who has tried to talk a non PC literate user through correction routines over a dodgy mobile telephone while the said user is trying to operate mouse/keyboard in an Atlantic swell will appreciate the problem.

However, there is a fairly good mobile phone broadband signal available in the area so I was wondering if there was anyway I could set up a point to point connection with the boat over this medium. That would allow me to administer the machine remotely.

View 2 Replies View Related

Ubuntu :: UFW Firewall Setting - Login To The Machine Via LAN Computers

Aug 15, 2011

correct settings for UFW on my Ubuntu Desktop 11.04 I am setting upo a webserver and want the security for hosting websites but I also need to login to the machine via my LAN computers. I am concerned about setting it up incorrectly and having people hack my machine.

View 3 Replies View Related

General :: Setting Up A Machine With 3 Monitors?

Jan 20, 2010

link to an up-to-date tutorial for setting up Linux with 3 monitors? Specifically, I want to set up 2 different nvidia video cards with 3 monitors. I can already do 2 monitors on 1 video card, so I am not interested in those tutorials.

View 3 Replies View Related

Ubuntu Networking :: Access Machine Via Windows Machine - Samba Password Reset?

Feb 13, 2011

I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything

View 2 Replies View Related

Ubuntu Networking :: Cannot Ping KK Machine, Internet/network ON Machine Works?

Mar 18, 2010

I have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).

View 2 Replies View Related

Ubuntu Networking :: Change Folder Names Over A Network On A Machine Using A Mac Machine

Jul 24, 2010

It seems whenever i create a folder it creates the folder as untitled folder, but i can't change the folder name it just says "you don't have permission to rename item" but yet i created the folder and it is there. One thing i have noticed is that once i enter a folder it won't even let me move the folder.

View 6 Replies View Related

Ubuntu :: Virtual Machine Networking / Network Not Working After Copied Machine?

Dec 3, 2008

I have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).

View 2 Replies View Related

Software :: Setting Up Tightvnc For Multiple Users On Same Machine?

Nov 26, 2010

I am searching for a way to have multiple sessions or users on the same vnc server. I have a machine that I need to remotely access as root (for admin purposes) and as myself (as the normal user) the rest of the time. I probably will never have to remotely login at the same time as both root and myself (I am not that multitasking!)I searched the web for almost 1 hour without finding anything useful... Right now my /etc/rc.d/rc.vncservers.conf looks like:

[code].....

View 2 Replies View Related

Ubuntu Networking :: Way To Share Folder From Machine To Windows Machine

Aug 28, 2010

I am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.

When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?

View 3 Replies View Related

Ubuntu :: Setting Up A Cron Job Creates A Tunnel To Remote Machine To Work Correctly On 9.10?

Jan 12, 2010

I am having some trouble setting up a cron job that creates a tunnel to my remote machine to work correctly on Ubuntu 9.10. The setup looks like the following:

(1) myscript.sh (executable)
Code:
#!/bin/bash
ssh -2 -x -i /home/user/.ssh/id_rsa.prv -L 3128:myremotemachine:3128 myaccount@myremotemachine
(2) crontab -e, added the following lines:

[Code]...

View 5 Replies View Related

Ubuntu Servers :: Setting SAMBA Server Correctly - Can Only Access Files From The Win 7 Machine

May 31, 2010

Im having trouble setting my SAMBA server correctly. I have two Win machines, one with WIN7 and one with XP. I have one Ubuntu machine and Ubuntu Server 10.04. My problem is that I can only acess files from the Win 7 Machine. When I try to map out the shared dirs on my serverI get asked for user and password, when I enter my creditensials it dosent help.. What to do? I used the sample smb.conf file and open for no restrictions..

[Code]....

View 9 Replies View Related

Server :: Samba - Setting Up Shares For Windows Machine On CentOS?

May 10, 2010

Can anyone point me in the direction of setting up shares for windows machines on centos. I have found a few document but never managed to get it up and running correctly. I need to be able to get access to subfolder etc for different users. Is there any way of doing it with some sort of gui?

View 2 Replies View Related

Ubuntu Networking :: Setup A Ssh Tunnel From Machine A To Machine B?

May 29, 2010

I can set-up an ssh tunnel from machine A to Machine B:-

fred@my-linux:~$ ssh -P myport fred@myserver.homelinux.com

I can successfully logon to machine A to Machine B.

what address and port will my tunnel 'appear' on machine B? I want to send a stream back from B to A up the encrypted tunnel, not over the open network.

View 5 Replies View Related

Fedora Networking :: Getting A Machine To Update Its Machine Name In The DNS ServerSounds Doesn't?

Feb 20, 2011

I have an issue with the manner in which Network Manager is configuring the network and short of ditching Network Manager I can see no solution.The issue : Getting a machine to update its machine name in the DNS serverSounds simple doesn't it I operate a FreeBSD based firewall / DHCP / DNS server, using a default Network Manager DHCP configuration the Fedora clients do not register their names with the DNS server when they obtain an address.

I have traced the communications with Wireshark and the Fedora clients are NOT supplying the PC's hostname as part of the exchange so this is NOT a DNS server configuration issue. If I uncheck the option 'Automatically obtain DNS information from provider' under the DHCP settings the Fedora clients DO register the hostname that is put into the Hostname (optional) databox. They do NOT however store the DNS server IP address or any other records defined by the DNS server.

Is there some hidden settings or is this a bug because it isn't acceptable 'DHCP' behaviour if it isn't possible to automatically set DNS server IP addresses and at the same time register the hostname during the DHCP negotiation. Before it is said I know I can use a fixed DNS IP address but am not prepared to long term, I am also not prepared to define the Fedora clients with a 'static' IP. I am similarly not interested in playing around with scripts or any other such 'frigs' to achieve what should be a standard activity - registering a host with DNS during the DHCP negotiation.

View 3 Replies View Related

Networking :: Access A Windows Server 2000 Machine Using A Machine Via KDE?

Apr 9, 2010

I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.

View 7 Replies View Related

Networking :: Transfer Files From A Machine To A Windows Machine Which Are Not In The Same Network?

Jul 6, 2010

I had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing

View 6 Replies View Related

Ubuntu Networking :: Unable To See Machine From Any XP Machine?

Jan 6, 2010

I have a ubuntu 9.04 machine i'm using as a file server. I'm able to see that machine from any XP machine, connect to it's shares play music, movies, work off of it NO problems. But i can't view the shares from a windows 7 home edition PC (garbage). AND, from the ubuntu PC, i can't see any of the other shares on network. I get "Fail to receive share list from server".

NOTE: Originally i had this machine connected with wireless card because of location. and I was able to see all shares then - both ways (still not from Windows 7 PCs though). However, when I moved to hard wire connection, the network disappeared. I've tried changing IP addresses, changing switches, but no network. I'd like to keep it hard wire. Can anyone point me in right direction or am i missing information?

View 1 Replies View Related

Networking :: Can't Ping CentOS 5.3 Machine To XP SP2 Windows Machine

Oct 31, 2009

I have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!

A. Windows machine settings as follows:

IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.

B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :

1. /etc/sysconfig/network:

ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain

2. /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"

3. /etc/resolv.conf

nameserver 192.168.1.4
search locadomain

4. I restarted network service using this command:

/etc/init.d/network start

everything is fine. When checking using ifconfig command. I get the following:

eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........

[code]....

I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.

View 14 Replies View Related

Networking :: Machine A Can't Access The Network When Machine B Goes Offline?

Mar 1, 2011

I've run into a weird problem. Two of my linux machines (A and B, both running CentOS 5.5) are connected to the same wall ethernet socket via a hub. Bothf them are configured for static IPs. The trouble is that when machine B goes offline or hits a kernel panic, machine 1 goes offline too. What I've noticed is that in this condition the "route" output from machine A does not show any entry for the default gateway either The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 for machine A are:

Code:
# Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
DEVICE=eth0

[code]...

View 3 Replies View Related

Ubuntu Networking :: How To Get WIn XP Machine To See Machine

Jan 25, 2011

I am a new user trying Ubuntu 10.Got it up and running.Can connect to the internet.Can send and receive E Mail.Can see my Win XP machine that is also on my home netwook.Can transfer files from my Win XP machine to my Ubuntu Machine but just cannot work out how to get my WIn XP machine to see my Ubuntu machine.

View 5 Replies View Related

Fedora Networking :: Can Access Unix Machine From Another Unix Machine?

Feb 23, 2009

i have been using samba to gain access into windows computer through my pc which has fedora 8 ..can i access the unix machine from another unix machine? is yes then what is the procedures ?

View 4 Replies View Related

Ubuntu Networking :: Setting Up Nat On 11.04?

May 7, 2011

I have built a server, installed Ubuntu 11.04 on it. I have two Nic cards. I am attached to the DSL modem thru the first card and am accessing the web on the server.

I attached a hub to the second port.

I have a Windows 7 client plugged into the hub.

"This setup was working on 2003 Server, now trying Ubuntu"

I followed the directions on the ubuntu site to setup Nat. GUI Method via Network Manager (Ubuntu 9.10 and up). I cannot connect.

View 2 Replies View Related

Ubuntu Networking :: Setting Up An Intranet In 10.04?

Jul 7, 2010

I want to do is make an old computer of mine that I use for web development be accessible to anyone within my LAN only.

so in a nutshell i don't want the world wide web to be able to access this server since I use it for development work only and i do most of my actual development work on another system since most of the applications i use requires windows.

I know you can block incoming traffic to all IPs or add individual IPs to allow in, but how can i make the firewall only accept incoming traffic from those within my LAN network?

if you wish to know what I'm using to configure my firewall, I'm using firestarter on this server

View 5 Replies View Related

Ubuntu Networking :: Setting Up A Router ?

Jul 23, 2010

I tried to setup a Ubuntu Wired Router according to the manual but found a problem.

At the end of the doc page it says:

Code:

The problem though is that I don't have a wireless connection and what do I put at the end?

It says "bridge-ports eth1 wlan0" so should I change that to "eth1" twice or just leave "wlan0" out or how do I fix this?

View 9 Replies View Related

Ubuntu Networking :: Setting The Tunnels And Rdp?

Apr 17, 2011

I want to login to my university server, in windows i used Putty and rdp.the setting in putty (download to my ubuntu and runnig) SSH-> tunnels

destination: 2.bgu.ac.il:3389
source port:7000
on local
session SSH type 1.bgu.ac.il port:22

so far so good i logged in and i can see the files on the 1.bgu the next step is to open RDP and ask him to login localhost:7000Not Working, i use Gnome-RDP and Remmina Remote Desktop Client no luck on both.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved