Ubuntu Networking :: Iptables And Cannot Get Port Forwarding To Work?

Mar 8, 2011

I've been beating myself over the head with iptables and CANNOT get port forwarding to work. Here's my situation: Static LAN IP on eth0 Static internet IP on eth1 ip_forward is turned on by uncommenting in sysctl.conf Here's the output of iptables-save:

Code:
# Generated by iptables-save v1.4.4 on Tue Mar 8 10:34:12 2011
*nat
:PREROUTING ACCEPT [2443:347058]

[Code]...

Edit: by the way, the intended purpose of this machine is to server as a gateway and firewall. MASQUERADE is working, for whatever that is worth. And the host behind the firewall that is serving up http is definitely working too. All that is not working is getting hosts on the internet talking to hosts behind the firewall.

View 1 Replies


ADVERTISEMENT

Networking :: Iptables - Port Forwarding To Blocked Port?

Mar 25, 2010

I have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...

View 2 Replies View Related

Networking :: Iptables Not Port Forwarding?

Aug 14, 2010

I have a CentOS box which is Internet Facing. It has 3 LAN's connected to it which are for virtual machines.

I want to port forward port 445 to a machine on one of the LAN interfaces. I have tried various ways to get it done, but still cannot access that port from the interface. I definately know device hosting port 445 is live, as I can ping it from the CentOS box and use lynx to access it! (It's a web server)

iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 445 -j DNAT --to-destination 192.168.0.2:445

View 6 Replies View Related

Networking :: Iptables Port Forwarding?

Jun 7, 2010

I've been Googling about port forwarding iptables and even though there's result and I've applied it in my script, I can't make iptables forwading request to another machine so I decided to ask help.

eth0 is my Internet Interface (1.2.3.4 is the public ip)
eth1 is my Lan Interface
eth2 is my DMZ Interface

[code]....

View 14 Replies View Related

Networking :: Port Forwarding With IPTables?

May 6, 2011

I have a server running debian squeeze and kvm to virtualize a Windoze box. It's setup to use NAT. This is because of limits on the network by the admin and unfortunately, there isn't a way to get around this.

View 1 Replies View Related

Ubuntu Networking :: Port Forwarding With Arno Iptables?

Feb 20, 2010

iam using arno iptables can give me command to ip forwarding cause my web server behind my router. my ip web server 192.168.0.11 and my ip router on eth 1 192.168.0.1 and eth0 i use to dial up my modem and i use pppoe for that.

View 2 Replies View Related

Networking :: Iptables Port Forwarding Not Working?

Jan 28, 2011

I've used iptables since it replace ipchains, and I've never had a problem like this.The problem is, as you can see by the title, that port forwarding simply does not work.

network topology:
Slackware Linux Server:
eth0 - LAN (192.168.0.0/25)
eth1 - DSL Static IP
eth2 - cable Static IP

eth1 is our standard office connection; it handles all of our default traffic (web browsing for the staff, email, etc). eth2 is our VPN connection, as well as use for all incoming connections (www, etc). Behind the linux box I have a series of Windows Server 2008 R2 boxes that are used to run our office software, website, etc - I don't care how nice they make their products these days, I simply don't trust any MS box open to the net.
Therefore, this leaves me with having to port forward port 80 from eth2 to the internal IP address of the web server.

My ruleset is as follows:

$WWW - ip address of the web server
iptables -A FORWARD -d $WWW -p tcp --dport 80 -j ACCEPT
iptables -t nat -A PREROUTING -i eth2 -p tcp --dport 80 -j DNAT --to $WWW

Running ip route shows that I have routing entries for all 3 networks, and I can ping, ssh, etc to any of the addresses without issue. OpenVPN connects across eth2 as well, and all 15 of my VPN tunnels work fine. However - and here's the kicker - if I delete the default route and replace it with the route for eth2, port forwarding works fine.

If we accept that my networks are as follows:

192.168.0.0/25 - eth0 net, gw .1
1.1.1.0/29 - eth1 net, gw .1, eth1 ip .2
2.2.2.0/30 - eth2 net, gw .1, eth2 ip .2

then ip route reveals the following:

2.2.2.0 via 2.2.2.1 dev eth2
2.2.2.0 dev eth2 scope link src 2.2.2.2
1.1.1.0 dev eth1 scope link src 1.1.1.2

[code]....

View 7 Replies View Related

Networking :: IPTables Port Forwarding To Routed IP?

Aug 3, 2010

I have a linux server I'm intending to use as a firewall. The server has the following adapters

eth0 - Public IP (VLAN2)
eth0:1 - Public IP2 (VLAN2)
eth1 - 10.241.4.4 (VLAN4)

the Default gateway is my ISPs gateway. Additionally, I have the following route set: route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.241.4.1

I have a server that exists on VLAN 208 at IP 10.241.209.67/21., its GW is 10.241.208.1 (first IP in /21 range)

as it is on the 10.0.0.0/8 network, traffic from the firewall is successfully routed from that server through my router to the FW and out to the Internet. The FW can ping, ssh, etc... the server and vice versa.

I want an iptables rule that will allow me to forward port 4401 on eth0:1 to 10.241.209.67:4401.

Is this possible since the IP is not on the same subnet as eth1, even though it is accessible?

I'm a bit better than a neophyte linux user. I have not made port forwards with it in the past without scripts to assist so I'm looking for not just "it is possible", but also the syntax of how to add it.

View 2 Replies View Related

Networking :: IPTables Port Forwarding Using Prerouting Not Working?

Feb 18, 2010

I was trying to setup port forwarding on my setup. My network consists of:

Code:

[Server: xxx.xxx.xxx.15]
|
|
[ switch ]

[code]....

I ran the following 2 commands:

# iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination xxx.xxx.xxx.15:80
# iptables -A INPUT -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT

Yet I am unable to connect. Are these the correct commands? I am using IP Masquedering on the same box using the following commands:

Code:

$IPTABLES -P INPUT ACCEPT
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT ACCEPT

[code]....

I don't think there is a hidden firewall in the switch but if these commands are correct, then I may need to contact my ISP and see if they are blocking the commands. I just wanted to make sure I was not doing some stupid mistake before I try to contact my ISP.

EDIT: Also, is it possible to forward Port 80 requests to different servers depending on the hostname used to connect, so say [URL] redirects to server xxx.xxx.xxx.15 while hhh.com redirects to xxx.xxx.xxx.16?

View 3 Replies View Related

Networking :: IPtables Port Forwarding \ Have A Computer With Two Interfaces Eth0(LAN) And Eth1(WAN)?

Apr 20, 2011

I have a computer with two interfaces eth0(LAN) and eth1(WAN).I have followed some guides on the internet and came up with this iptables configuration:

# Generated by iptables-save v1.4.4 on Wed Apr 20 09:43:12 2011
*nat
:OUTPUT ACCEPT [0:0]

[code].....

View 2 Replies View Related

Fedora Networking :: Port Forwarding Does Not Work

Mar 22, 2009

I have a question regarding port forwarding. I have a fedora server, with two eth cards: eth0 ---> external IP, eth1 ----> LAN IP I use SNAT for connection sharing. I also have an internet domain hosted on this server... let's call it [URL] Anyway, one of our computers in the LAN has some kind of web server on it, which must be accessed from the internet on the port 23700.

So, using iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 23700 -j DNAT --to 192.168.1.25 (the IP of the network computer) Everything works perfectly fine from outside the lan. When I type [URL], I connect to that computer. My problem is that inside the lan, typing [URL] does not work! It only works if I enter it by IP 192.168.1.25:23700 Is there any way to make the server forward my request to that specific computer even if I'm inside the LAN?

View 3 Replies View Related

Networking :: Port Forwarding (DNAT) Won't Work

Jun 3, 2011

I'm trying to understand and set up port forwarding with iptables. So far I've read a lengthy tutorial on iptables, and I've Googled for hours, searched this forum, but I've been unable to come up with a solution that works for me.The situation I would like to achieve is the following: on one machine, there is a TCP server running bound to its external IP, port 9999. I would like to let another machine connect to this TCP server on port 9000 by forwarding port 9000 to 9999.All the policies of the iptables chains are set to ACCEPT; and I have set net.ipv4.ip_forward = 1. I have no problems using SNAT/MASQUERADE on the same server machine.I have tried the following:

Code:

iptables -F
iptables -t nat -F
iptables -t nat -A PREROUTING -p tcp -i eth0 -d ${SERVER_IP} --dport 9000 --sport 1024:65535 -j DNAT --to ${SERVER_IP}:9999

In order to test this rule, I started a TCP echo server on port 9999. I can connect to it on port 9999, but not on port 9000- this gives me 'connection timed out'. When I do 'iptables -t nat -L -v', I can see that the rule does get matched once per connection attempt.

View 1 Replies View Related

Ubuntu :: Port Forwarding Using Iptables Not Working?

Jul 17, 2009

I am using ubuntu 8.40 as a router wit 2 nic.eth0 is for local and eth1 is for external network.i have a internal webserver in my lan and want to forward some ports to the net and i executed te following commands.

iptables -t nat -A PREROUTING -p tcp -i eth1 -d 192.168.0.239 --dport 8080 -j DNAT --to 192.168.10.99:8080
iptables -A FORWARD -p tcp -i eth1 -d 192.168.10.99 --dport 8080 -j ACCEPT

But i cant connect to the port 8080 from the external network.

View 11 Replies View Related

Slackware :: Port Forwarding Using IPtables?

Jun 16, 2011

how to set an external static IP address to forward to an internal static IP address. Here is an example:

Linux box (slackware) IP address =
eth0: 10.xxx.xxx.xxx (internal)
eth1: xxx.xxx.xxx.170
eth1.0: xxx.xxx.xxx.171
eth1.1: xxx.xxx.xxx.172

DVR system that I need to forward to: IP address =
xxx.xxx.xxx.251
xxx.xxx.xxx.252

This was all setup by someone else whom I have never spoken with. The IP tables seems to be set up but I cannot provide a screen shot at this time. What I need to do is this. When a user connects to the external static IP address of xxx.xxx.xxx.171 with their DVR software, IP tables will forward to the DVR system at xxx.xxx.xxx.251. The ports desired are 554,555,556, and 557. I know some about Linux but not about IPtables.

View 1 Replies View Related

Networking :: Shorewall: Port Forwarding Port Is Closed Even After Forwarding?

Dec 12, 2009

I have just set up shorewall on my router running Arch Linux. The external network is on eth0 and the internal network on eth1.I have set it up for masquerading and that works fine and I can open ports to the firewall. But I'm having trouble with port forwarding to my internal machines.The problem I have is that when port 22350 is forwarded to 192.168.1.3 on my local network, checking the port with nmap from a remote computer gives me:

Code:
PORT STATE SERVICE
22350/tcp closed unknown

[code]....

View 2 Replies View Related

Ubuntu Security :: Iptables Not Allowing Port Forwarding

Sep 5, 2010

I've got two virtual machines running, the first VM (VM1) has two network interfaces, one bridged with my real lan, one a private subnet. The second VM (VM2) has one nic, only on the private subnet.

I have VM1 acting as a router for VM2, giving access to my real lan for internet access. The problem I'm having is I cannot get VM1 to forward ports 80 (http) or 222 (ssh) to VM2 from my real lan.

Here is the script I've cobbled together from various (foreshadowing!) locations:

Code:

View 1 Replies View Related

Server :: Iptables Port Forwarding Not Working?

Mar 26, 2010

I have the following setup and Im trying to forward all incoming connection on port 1194 on eth2 which is the external network to ip 192.168.10.100, but seems its not working.

Current config:

# Generated by iptables-save v1.3.8 on Sun Nov 16 00:00:54 2008
*nat
:PREROUTING ACCEPT [26751696:2175544875]
:POSTROUTING ACCEPT [339911:19096812]

[code]....

plus im adding the prerouting:

iptables -t nat -A PREROUTING -i eth2 -p tcp --dport 1194 -j DNAT --to-destination 192.168.10.100

This configuration doesnt work. I also I have tried:

iptables -D PREROUTING -t nat -p tcp -d XX.XX.XX.XX --dport 1194 -m state --state NEW,ESTABLISHED,RELATED -j DNAT --to 192.168.10.100:1194

and the same its not working. Connecting thru telnet to the domain: telnet mydomain.org 1194 doesnt work, but within the server, running telnet 192.168.10.100 1194 it works.

View 8 Replies View Related

Ubuntu Servers :: Port Forwarding Setup Using IPTables - Transparent Proxy

May 13, 2010

I'm new to linux, but enjoy using it very much, especially without a GUI, console is fun! I need to set up port forwarding. We have 3 servers, 1x running Ubuntu server 8.04 (used as transparent proxy), 1x server 2003, 1x windows xp.

The linux box has the following ips:
eth0 (internal) 192.168.1.5
eth1 (external) 192.168.0.7

Windows server 2003:
192.168.1.6

Windows XP:
192.168.1.9

Router:
192.168.0.1

The router automatically forwards specific ports to 196.168.0.7 (Linux eth0). From there I want to forward port 8585 to 192.168.1.6 and 3000 to 192.168.1.9. Is there a way that I can do this using iptables?

The commands that I think I'm gonna use look like this:
iptables -A FORWARD -s 192.168.0.0/24 -p tcp --dport 8585 -d 192.168.1.6 -j ACCEPT
iptables -A FORWARD -s 192.168.0.0/24 -p tcp --dport 3000 -d 192.168.1.9 -j ACCEPT

Would this be a correct way of doing it? My biggest problem is that I can't test it without going live, and if I go live and something doesn't work, the entire building will be left without internet, people will hate me. Also, The proxy captures all data on port 80 and forwards it to 3128 so that the proxy can monitor the usage, and a few systems runs fine with it, others however can ping websites, and internet explorer says "website found, waiting for reply" but the webpages cannot be displayed.

View 9 Replies View Related

General :: Setting Up Iptables For Traffic Forwarding On Port 80 From Specific Sources?

Jun 1, 2010

Im running a web server on port80, but i want traffic coming from ip 212.333.111.222 on port 80 to be fowarded to port 9020 on the same server that my web server is rinning at that is my sshd port

View 1 Replies View Related

Security :: Port-bind Shellcodes Work With Port-forwarding?

Apr 27, 2011

I'll explain this in one sentence: Is it possible to program a port-binding shellcode in which people across the Internet can connect to, without being thwarted by the router blocking their data because the port its bound to doesn't allow port-forwarding

View 2 Replies View Related

Ubuntu Networking :: Error - Remote Port Forwarding Failed For Listen Port 5500

Aug 7, 2010

When I use the following command:

ssh user@ssh_server -L 5500:localhost:5500 -p 22

everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:

ssh user@ssh_server -R 5500:localhost:5500 -p 22

I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...

View 2 Replies View Related

Ubuntu Networking :: Port Forwarding Through A Specific Port?

Jul 14, 2011

I want to set my ip as static and port forward it through a specific port can anyone help me with this im using ubuntu 10 with 64 bit OS

View 1 Replies View Related

Networking :: Setup Port Forwarding Of Port 1000 To Ip 192.168.1.200?

Oct 24, 2010

I had to add them to my firewall script when I installed openvpn on my dd-wrt router:

iptables -I FORWARD -i br0 -o tun0 -j ACCEPT
iptables -I FORWARD -i tun0 -o br0 -j ACCEPT
iptables -I INPUT -i tun0 -j REJECT
iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE

what should I add/change to set up port forwarding of port 1000 to ip 192.168.1.200. also how to get the answer sent by 192.168.1.200 follow the same route used by the data received through port forwarding.

View 1 Replies View Related

Ubuntu :: VMware Workstation Port Forwarding Did Not Work

Sep 18, 2010

I have a machine with Ubuntu Server and VMware Workstation 7 installed. I have tried NAT port forwarding to gain Remote Desktop access to a Windows virtual machine, but it did not work for whatever reason. I've done this by editing the nat.conf file in the /etc/vmware/vmnet8/nat directory. Unfortunately it still does not work. Also, I would like to ask if it is possible to port forward using the virtual machine itself and not the host.

View 1 Replies View Related

Red Hat / Fedora :: Iptables And Forwarding Stuff Doesn't Work On The Private Network

Mar 27, 2011

I have 2 different networks: the first one is gateway machine (eth0), and the second is a private machine (eth1). So, I've configured the iptables and forwarding stuff and when I try to ping google.com on the gateway machine, it works, while it doesn't work on the private network. Note: I am using VmWare 7. I need your quick assistance about this issue.

View 2 Replies View Related

Networking :: Iptables Not Forwarding To Another Ip?

Dec 13, 2010

I have 2 Linux boxes one acting as a router with a direct connection to the internet, second as a server using the first box as a gateway to the internet. I need to forward requests that I get from the outside to port 8400 to my internal server box at 192.168.0.7:8400

Router IP 192.168.0.5
Server IP 192.168.0.7
iptables -t nat -A PREROUTING -p tcp -d [internet ip] --dport 8400 -j DNAT

[code]...

These rules are on the router (192.168.0.5) I've been trying to find a solution for hours with no success. Basically the problem is I can forward ports on the same box but not to a different ip.

View 1 Replies View Related

Networking :: Packet Forwarding Using IPtables?

May 4, 2011

I have 2 Ubuntu boxes sitting in the same subnet; server 1 [130.15.6.68] and server 2 [130.15.6.69] What I am trying to achieve here is the following: server 1 act as a gateway or proxy to server 2, meaning that server 1 is exposed to the Internet and all traffic to server 2 should go though it (i hope!).

server 2 act as application server and I don't want a direct access to it from the internet. I want all the inbound traffic comes through server 1. for testing purposes, i will limit the traffic to simple http or port 80

in server 1, i have done the following settings: iptables -t nat -A PREROUTING -p tcp -i eth0 -d 130.15.6.68 --dport 80 -j DNAT --to 130.15.6.69:80 iptables -A FORWARD -p tcp -i eth0 -d 130.15.6.69 --dport 80 -j ACCEPT In server 1, I've edited the value of net.ipv4.ip_forward to equal 1 (uncomment that line in /etc/sysctl.conf) Currently, both server 1 and server 2 has its own apache2 servers with different index.html files. the problem is, when i browse to server 1, I am still seeing its index page rather than being forwarded to the index page of server 2. how can i achieve the traffic forwarding from server 1 to server 2 when my browser pointing to server 1?

View 3 Replies View Related

Networking :: Forwarding Ports With Iptables?

Dec 23, 2010

I am running a server with ssh and a vpn server set up. It is behind a debian router with a firewall which uses iptables. i have it set up to forward ports 22 and 443 to ssh on a computer within the LAN(so when on a restricted network i can still ssh into my network) and forward anything to 1723(for my vpn) to that box also. However, the only port that gets successfully forwarded is port 22. The other two appear closed. here is what the script looks like:

Code:
#!/bin/sh
#

[code]...

View 2 Replies View Related

Networking :: Use Iptables In Order To Forward All The Incoming Packets For Port 5555 To Port 5556?

Apr 4, 2011

I'm trying to use iptables in order to forward all the incoming packets for port 5555 to port 5556 on the same server (192.168.2.101).

I wrote the following commands:

iptables -A PREROUTING -t nat -i any -p tcp --dport 5555 -j DNAT --to 192.168.2.101:5556
iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.2.101 --dport 5556 -j ACCEPT

View 3 Replies View Related

Networking :: Iptables Can't Port Forward (PAT Port Address Translation)?

Feb 20, 2010

I'm using a Debian servers, as router/firwall.. I've two ethernet interfaces into the server, one for wan and one for lan. The i use SNAT so my LAN clients can access the internet throgh the debian router. That is working... Now i want to be able to access servers on the LAN site from the WAN site, and i wanna use port address translation (PAT). I have a FTP server running on a lan server, so i'm trying to portward port 21.

iptables -t nat -A PREROUTING -p tcp -i eth1 -d (WANIP) --dport 21 -j DNAT --to 192.168.1.2:21

When people try to access my FTP from the WAN site, they are redirected to the local FTP server, and they are promted for crendentials, but when the credentials are typed, and the local ftp server should answer the wan request, the connections dies.

The wan clients are being promted for credentials, so they are redirected to the local lan server, but after that the connections dies, so i think there is some kind of nat problem, when the local lan server is trying to respond to the wan request..

Here i my iptables script:

#flush table
iptables -F
#input regler

[code]....

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved