Networking :: Forwarding Ports With Iptables?
Dec 23, 2010
I am running a server with ssh and a vpn server set up. It is behind a debian router with a firewall which uses iptables. i have it set up to forward ports 22 and 443 to ssh on a computer within the LAN(so when on a restricted network i can still ssh into my network) and forward anything to 1723(for my vpn) to that box also. However, the only port that gets successfully forwarded is port 22. The other two appear closed. here is what the script looks like:
Code:
#!/bin/sh
#
[code]...
View 2 Replies
ADVERTISEMENT
Dec 13, 2010
I have 2 Linux boxes one acting as a router with a direct connection to the internet, second as a server using the first box as a gateway to the internet. I need to forward requests that I get from the outside to port 8400 to my internal server box at 192.168.0.7:8400
Router IP 192.168.0.5
Server IP 192.168.0.7
iptables -t nat -A PREROUTING -p tcp -d [internet ip] --dport 8400 -j DNAT
[code]...
These rules are on the router (192.168.0.5) I've been trying to find a solution for hours with no success. Basically the problem is I can forward ports on the same box but not to a different ip.
View 1 Replies
View Related
Aug 14, 2010
I have a CentOS box which is Internet Facing. It has 3 LAN's connected to it which are for virtual machines.
I want to port forward port 445 to a machine on one of the LAN interfaces. I have tried various ways to get it done, but still cannot access that port from the interface. I definately know device hosting port 445 is live, as I can ping it from the CentOS box and use lynx to access it! (It's a web server)
iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 445 -j DNAT --to-destination 192.168.0.2:445
View 6 Replies
View Related
Jun 7, 2010
I've been Googling about port forwarding iptables and even though there's result and I've applied it in my script, I can't make iptables forwading request to another machine so I decided to ask help.
eth0 is my Internet Interface (1.2.3.4 is the public ip)
eth1 is my Lan Interface
eth2 is my DMZ Interface
[code]....
View 14 Replies
View Related
May 4, 2011
I have 2 Ubuntu boxes sitting in the same subnet; server 1 [130.15.6.68] and server 2 [130.15.6.69] What I am trying to achieve here is the following: server 1 act as a gateway or proxy to server 2, meaning that server 1 is exposed to the Internet and all traffic to server 2 should go though it (i hope!).
server 2 act as application server and I don't want a direct access to it from the internet. I want all the inbound traffic comes through server 1. for testing purposes, i will limit the traffic to simple http or port 80
in server 1, i have done the following settings: iptables -t nat -A PREROUTING -p tcp -i eth0 -d 130.15.6.68 --dport 80 -j DNAT --to 130.15.6.69:80 iptables -A FORWARD -p tcp -i eth0 -d 130.15.6.69 --dport 80 -j ACCEPT In server 1, I've edited the value of net.ipv4.ip_forward to equal 1 (uncomment that line in /etc/sysctl.conf) Currently, both server 1 and server 2 has its own apache2 servers with different index.html files. the problem is, when i browse to server 1, I am still seeing its index page rather than being forwarded to the index page of server 2. how can i achieve the traffic forwarding from server 1 to server 2 when my browser pointing to server 1?
View 3 Replies
View Related
May 6, 2011
I have a server running debian squeeze and kvm to virtualize a Windoze box. It's setup to use NAT. This is because of limits on the network by the admin and unfortunately, there isn't a way to get around this.
View 1 Replies
View Related
Jan 28, 2011
I've used iptables since it replace ipchains, and I've never had a problem like this.The problem is, as you can see by the title, that port forwarding simply does not work.
network topology:
Slackware Linux Server:
eth0 - LAN (192.168.0.0/25)
eth1 - DSL Static IP
eth2 - cable Static IP
eth1 is our standard office connection; it handles all of our default traffic (web browsing for the staff, email, etc). eth2 is our VPN connection, as well as use for all incoming connections (www, etc). Behind the linux box I have a series of Windows Server 2008 R2 boxes that are used to run our office software, website, etc - I don't care how nice they make their products these days, I simply don't trust any MS box open to the net.
Therefore, this leaves me with having to port forward port 80 from eth2 to the internal IP address of the web server.
My ruleset is as follows:
$WWW - ip address of the web server
iptables -A FORWARD -d $WWW -p tcp --dport 80 -j ACCEPT
iptables -t nat -A PREROUTING -i eth2 -p tcp --dport 80 -j DNAT --to $WWW
Running ip route shows that I have routing entries for all 3 networks, and I can ping, ssh, etc to any of the addresses without issue. OpenVPN connects across eth2 as well, and all 15 of my VPN tunnels work fine. However - and here's the kicker - if I delete the default route and replace it with the route for eth2, port forwarding works fine.
If we accept that my networks are as follows:
192.168.0.0/25 - eth0 net, gw .1
1.1.1.0/29 - eth1 net, gw .1, eth1 ip .2
2.2.2.0/30 - eth2 net, gw .1, eth2 ip .2
then ip route reveals the following:
2.2.2.0 via 2.2.2.1 dev eth2
2.2.2.0 dev eth2 scope link src 2.2.2.2
1.1.1.0 dev eth1 scope link src 1.1.1.2
[code]....
View 7 Replies
View Related
Aug 3, 2010
I have a linux server I'm intending to use as a firewall. The server has the following adapters
eth0 - Public IP (VLAN2)
eth0:1 - Public IP2 (VLAN2)
eth1 - 10.241.4.4 (VLAN4)
the Default gateway is my ISPs gateway. Additionally, I have the following route set: route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.241.4.1
I have a server that exists on VLAN 208 at IP 10.241.209.67/21., its GW is 10.241.208.1 (first IP in /21 range)
as it is on the 10.0.0.0/8 network, traffic from the firewall is successfully routed from that server through my router to the FW and out to the Internet. The FW can ping, ssh, etc... the server and vice versa.
I want an iptables rule that will allow me to forward port 4401 on eth0:1 to 10.241.209.67:4401.
Is this possible since the IP is not on the same subnet as eth1, even though it is accessible?
I'm a bit better than a neophyte linux user. I have not made port forwards with it in the past without scripts to assist so I'm looking for not just "it is possible", but also the syntax of how to add it.
View 2 Replies
View Related
May 14, 2009
Since there was no response on my other post which i spent about a hour writing, ill go for something simpler. I run this on my server
Code:
# set default policy for the NAT table
iptables -t nat -P PREROUTING ACCEPT
[code]...
View 9 Replies
View Related
Feb 20, 2010
iam using arno iptables can give me command to ip forwarding cause my web server behind my router. my ip web server 192.168.0.11 and my ip router on eth 1 192.168.0.1 and eth0 i use to dial up my modem and i use pppoe for that.
View 2 Replies
View Related
Mar 8, 2011
I've been beating myself over the head with iptables and CANNOT get port forwarding to work. Here's my situation: Static LAN IP on eth0 Static internet IP on eth1 ip_forward is turned on by uncommenting in sysctl.conf Here's the output of iptables-save:
Code:
# Generated by iptables-save v1.4.4 on Tue Mar 8 10:34:12 2011
*nat
:PREROUTING ACCEPT [2443:347058]
[Code]...
Edit: by the way, the intended purpose of this machine is to server as a gateway and firewall. MASQUERADE is working, for whatever that is worth. And the host behind the firewall that is serving up http is definitely working too. All that is not working is getting hosts on the internet talking to hosts behind the firewall.
View 1 Replies
View Related
Sep 12, 2009
For the background, I'll be using my router as a firewall with snort-inline enabled. I got 3 NIC's: one for the WAN, the second will be bridged to the WAN NIC for queuing traffic which snort-inline requires, and the third is the LAN NIC (the computer I use for everyday work). Here's how I have my interfaces set up:
Code:
# /etc/network/interfaces
# Loopback interface
auto lo
iface lo inet loopback
[code]....
From what I understand, queuing needs to be set up on the bridge. From the documentation I've read it's done like this:
Code:
iptables -A INPUT -j QUEUE
And then to forward traffic, I did:
Code:
iptables -t nat -A POSTROUTING -o br0 -j MASQUERADE
I've done this and am able to ping the router, obtain a DNS address from dnsmasq from the LAN computer. From the router I am able to connect to the internet (ping, links <address>...). From the LAN computer trafficking isn't getting forwarded, Firefox, links, ping all don't resolve.
View 7 Replies
View Related
Feb 18, 2010
I was trying to setup port forwarding on my setup. My network consists of:
Code:
[Server: xxx.xxx.xxx.15]
|
|
[ switch ]
[code]....
I ran the following 2 commands:
# iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination xxx.xxx.xxx.15:80
# iptables -A INPUT -i eth1 -p tcp -m tcp --dport 80 -j ACCEPT
Yet I am unable to connect. Are these the correct commands? I am using IP Masquedering on the same box using the following commands:
Code:
$IPTABLES -P INPUT ACCEPT
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT ACCEPT
[code]....
I don't think there is a hidden firewall in the switch but if these commands are correct, then I may need to contact my ISP and see if they are blocking the commands. I just wanted to make sure I was not doing some stupid mistake before I try to contact my ISP.
EDIT: Also, is it possible to forward Port 80 requests to different servers depending on the hostname used to connect, so say [URL] redirects to server xxx.xxx.xxx.15 while hhh.com redirects to xxx.xxx.xxx.16?
View 3 Replies
View Related
Apr 21, 2011
I'd like to pass all traffic between bridge ports via the FORWARDING chain, so I changed following sysctl parameters:
Code:
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
[code]...
View 1 Replies
View Related
Feb 16, 2011
I like to set in iptables to allow access from one host to my server on any ports.
Currently the iptables have been configured to deny all and to allow access only to those I've specified.
Can anyone advice on the command to achieve this?
View 1 Replies
View Related
Jun 30, 2011
I want to portforward client connections from an ubuntu lts server to another external server. btw i am a noob on iptables. i have tryed using the basic commands for iptables with no success. For example:iptables -A PREROUTING -t nat -i eth1 -p tcp --dport 7878 -j DNAT --to 91.23.45.67:7878iptables -A FORWARD -p tcp -i eth1 -o eth0 -d 91.23.45.67 --dport 7878 -j ACCEPTso basically i just want a rediraction for from one ip to another. Example: A client tries to connect to ip 123.45.67.89 on port 7878 and the server forwards him to ip xx.xx.xx.xx on port 7878, meaning that xx.xx.xx.xx is the actual server with services. Server with ip 123.45.67.89 is only forwarding the client to external ip... how can this be done in a simple command?
View 7 Replies
View Related
Sep 23, 2010
I'm trying to configure Iptables and I just want to block everything but http/https. However, my connection is pppoe, so I have the ppp0 interface. Pretty much every Iptables tutorial that I found don't teach how to deal with this kind of setup. I'm forwarding the ppp0 to eth0 and I could configure the input rules and they're working. After this, I need to configure the output but nothing seems to work.
The current working rules are:
Code:
Chain INPUT (policy ACCEPT 7858 packets, 5792K bytes)
pkts bytes target prot opt in out source destination
299 201K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED
0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:www
0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:https
11 820 DROP all -- any any anywhere anywhere
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- eth0 ppp0 anywhere anywhere
0 0 ACCEPT all -- ppp0 eth0 anywhere anywhere state RELATED,ESTABLISHED
Chain OUTPUT (policy ACCEPT 10791 packets, 1951K bytes)
pkts bytes target prot opt in out source destination
I don't understand what those "state RELATED,ESTABLISHED" rules do. Also, I don't know if this rules are secure, because i'm very confused about the ppp0/eth0 interfaces.
View 1 Replies
View Related
Feb 15, 2011
I like to set in iptables to allow access from one host to my server on any ports.Currently the iptables have been configured to deny all and to allow access only to those I've specified.
View 2 Replies
View Related
Apr 27, 2011
Because my ISP is blocking every IP port under 1000, I'd like my local nat'ed server to be able to translate incoming and outgoing traffic from some port above 1000 to the default server port locally.Example :
To connect to my IMAP server (default port : 143) from the outside,I'd connect to my public IP, port 1143 (opened and nat'ed to the right server on my router) and the server would translate this port to 143 on the same machine.I wish I could simply configure my router to do that but sadly Linksys doesn't permit such setting... I also could modify the listening port of my server but I prefear to keep the default port inside my network.I think that iptables is the right tool to do that and I never used it and I must say that this tool is not so easy to configure at first sigh
View 5 Replies
View Related
Apr 20, 2011
I have a computer with two interfaces eth0(LAN) and eth1(WAN).I have followed some guides on the internet and came up with this iptables configuration:
# Generated by iptables-save v1.4.4 on Wed Apr 20 09:43:12 2011
*nat
:OUTPUT ACCEPT [0:0]
[code].....
View 2 Replies
View Related
Jul 6, 2011
I'm having some issues settings up a transparent proxy server, which should allow only regular web browsing (port 80), any other port (including HTTPS (443)) has to be blocked, as well as any other port. Right now, I'm using Debian 6 and Squid3. The server only has one NIC. The topology is like this:
Clients <-> Proxy Server + DHCP Server <-> Internet
With this setup, the network does have internet access and the websites I whitelisted are the only ones accesible via browser, however port block is not working, every port is open, hence why trying to access blacklisted websites through HTTPS is possible. Seems to me Squid3 is doing it's job fine, however IPTABLES for some reason seems to be redirecting all the trafic to port 3128 (Squid3 port). I could be wrong, but I've been unable to do anything related to ports with squid3 (either whitelisting or blacklisting).
For Iptables I used:
Code:
iptables -A PREROUTING -t nat -i eth0 -p tcp -j REDIRECT --dport 80 --to-port 3128
iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT
iptables -A INPUT -i eth0 -m tcp -p tcp --dport 22 -j ACCEPT
iptables -A INPUT -i eth0 -m tcp -p tcp --dport 3128 -j ACCEPT
iptables -A INPUT -i eth0 -m tcp -p tcp --dport 443 -j DROP
Squid3 config:
Code:
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
acl Safe_ports port 80 # http
acl whitelist dstdomain "/etc/squid3/whitelist"
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny !whitelist
http_access allow localhost
http_access allow all
http_port 3128 intercept
hierarchy_stoplist cgi-bin
View 2 Replies
View Related
Mar 25, 2010
I have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...
View 2 Replies
View Related
Jun 28, 2011
So unfortunately I live in a place that will not let me have a static IP, so I have been setting up access to my home computer via reverse SSH tunnels that run on an micro amazon ec2 instance. I have gotten SSH to work fine, but I cannot figure out port forwards.Here is a small infographic I made to help illustrate (i felt the question was clearer with a diagram of what I was trying to do. Here are the commands listed in the graphic:I the following on my home computer: ssh -R 1337:localhost:22 -i .ssh/tokyoMinekey.pem ec2-user@ec2serveraddressand I run this on the ec2 server: ssh -L6600:localhost:6600 -Nf localhost -p 1337
View 2 Replies
View Related
Dec 2, 2010
Right now I have a VPS that I tunnel through using SSH/Putty/Proxycap. I use it for a certain program which uses a certain port X for authentication, and a different port Y for its data. However, due to certain security protocols I need port X to be somewhat "transparent" so that the IP from the originator will be shown - whilst tunneling data through port Y. The conditions though, are that I cannot just change the X/Y port values in the application itself, these are company specific.
How would I go about doing this? Because right now, my understanding is that if Putty calls for a certain application to go through a socks server, ALL its ports will be directed at that. I want a certain port to be passthrough.
View 1 Replies
View Related
Mar 1, 2011
This morning I was looking at the router's log file and noticed a certain IP address was able to gain LAN access on port 2222. That just happens to be the port my SSH server is listening on! A whois search revealed that IP address is in Germany. As soon as I found this out I stopped forwarding all ports to this machine in my router.
how to tell what had happened, what information this person was able to obtain, and if he left any goodies behind that could hurt me? I've read through some of the logs on my computer and haven't been able to find much at all. I did have some personal information on the hard drives, but that information is encrypted. I'm thinking if they were able to get my SSH password then that information probably isn't safe either (assuming they have some of it).
View 7 Replies
View Related
Jun 16, 2011
how to set an external static IP address to forward to an internal static IP address. Here is an example:
Linux box (slackware) IP address =
eth0: 10.xxx.xxx.xxx (internal)
eth1: xxx.xxx.xxx.170
eth1.0: xxx.xxx.xxx.171
eth1.1: xxx.xxx.xxx.172
DVR system that I need to forward to: IP address =
xxx.xxx.xxx.251
xxx.xxx.xxx.252
This was all setup by someone else whom I have never spoken with. The IP tables seems to be set up but I cannot provide a screen shot at this time. What I need to do is this. When a user connects to the external static IP address of xxx.xxx.xxx.171 with their DVR software, IP tables will forward to the DVR system at xxx.xxx.xxx.251. The ports desired are 554,555,556, and 557. I know some about Linux but not about IPtables.
View 1 Replies
View Related
Nov 10, 2010
I've been trying to forward some ports using iptables for some time now, but still haven't figured out how to get it to work..What i'm trying to accomplish is to forward all traffic from port 80 to port 8080, and all traffic from port 443 to port 8443, this because i would like to run tomcat as a non-root user, and the original ports can only be used as root.. I've currently setup my iptables like this:
# Generated by iptables-save v1.4.2 on Wed Nov 10 16:44:45 2010
*nat
:PREROUTING ACCEPT [39350:6120333]
[code].....
View 2 Replies
View Related
Mar 26, 2010
I have the following setup and Im trying to forward all incoming connection on port 1194 on eth2 which is the external network to ip 192.168.10.100, but seems its not working.
Current config:
# Generated by iptables-save v1.3.8 on Sun Nov 16 00:00:54 2008
*nat
:PREROUTING ACCEPT [26751696:2175544875]
:POSTROUTING ACCEPT [339911:19096812]
[code]....
plus im adding the prerouting:
iptables -t nat -A PREROUTING -i eth2 -p tcp --dport 1194 -j DNAT --to-destination 192.168.10.100
This configuration doesnt work. I also I have tried:
iptables -D PREROUTING -t nat -p tcp -d XX.XX.XX.XX --dport 1194 -m state --state NEW,ESTABLISHED,RELATED -j DNAT --to 192.168.10.100:1194
and the same its not working. Connecting thru telnet to the domain: telnet mydomain.org 1194 doesnt work, but within the server, running telnet 192.168.10.100 1194 it works.
View 8 Replies
View Related
Jul 17, 2009
I am using ubuntu 8.40 as a router wit 2 nic.eth0 is for local and eth1 is for external network.i have a internal webserver in my lan and want to forward some ports to the net and i executed te following commands.
iptables -t nat -A PREROUTING -p tcp -i eth1 -d 192.168.0.239 --dport 8080 -j DNAT --to 192.168.10.99:8080
iptables -A FORWARD -p tcp -i eth1 -d 192.168.10.99 --dport 8080 -j ACCEPT
But i cant connect to the port 8080 from the external network.
View 11 Replies
View Related
Sep 5, 2010
I've got two virtual machines running, the first VM (VM1) has two network interfaces, one bridged with my real lan, one a private subnet. The second VM (VM2) has one nic, only on the private subnet.
I have VM1 acting as a router for VM2, giving access to my real lan for internet access. The problem I'm having is I cannot get VM1 to forward ports 80 (http) or 222 (ssh) to VM2 from my real lan.
Here is the script I've cobbled together from various (foreshadowing!) locations:
Code:
View 1 Replies
View Related
