I see something like internet connection is established. Ive established etho connection but I cant open any sites at all. I also have Windows on another hard disk and it works well. About a week ago I had Ubuntu 8.04 and it worked really fine. What�s wrong? Is there any remedy?
View 3 RepliesI bought my new Dell inspiron N1401 64bit laptop. It has windows 7 installed in it, I am begineer to linux. I have installed Ubuntu 11.04 64 bit version. I have a wired internet connection which works fine with my windows 7. When I switch to Ubuntu, when internet cable is plugged, the top right corner, network manager shows connection is established, but when I open firefox I cannot access internet. I tried searching on forums, but I could not make it work. If I type ifconfig command in terminal attached is the output I get, I dont know what is the problem. I want to use Ubuntu than Windows
View 2 Replies View RelatedMy wired network dead which i used before 1hr. I seen my firestar firewall application blocked a hit from my internet provider gateway address. I allowed all the connection from my provider gateway after that hit. It did not work. I installed a new OS ubuntu 10.04 tls. and assigned the IP address but still I cant acess the internet. It says connection was established but i cant browse net. Some one pls help me. I tried configuring fire fox. no use.I am using Internet dish. I configure it by browser by entering dish IP.
View 9 Replies View RelatedI am new to ubuntu, just installed it a few hours a go. I've managed to get it hooked up to my wireless connection but still the internet doesnt work. What I can do to get it working?
View 4 Replies View Relatedi have just installed ubuntu 10.04 on my laptop hp 550.after i finished installation i connected to internet via eth0 wired connection normally and everything was fine...after about 1 hour i had no internet....i try restart but is the same problem....this is strange because my eth0 says connection established and when i open mozilla i cant open google either..when i ping [URL] it says "cant resolve "
my internet works fine in windows so what should i do to have back my internet on ubuntu...i cant do anything else in ubuntu if i have not internet and i like very much ubuntu so
I have problem in making connection to my vpn server I can make connection from windows xp to that but can not open any website and I can not ping 172.16.10.1 when connection established.
These are my configuration files:
server config file:
Quote:
client configuration file:
Quote:
And this is my server syslog tailed file:
Quote:
And I added this routing to /etc/rc.d:
Quote:
And this is my iptable:
Quote:
And vpn connection is lost after establishing a lot.
there is an open wireless i can connect it -in ubuntu- but can not browse anything.we tried to connect via mobile it's working fine ,in addition via Windows XP it's fine ,but not in ubuntu why???!!
View 1 Replies View RelatedI was wondering, on a GNU/Linux system including but not limited to *ubuntu, how would I go about determining when the network connection is established on any interface, so I can run a shell script only once at that exact time?The idea that comes to mind is polling-and-sleeping, but I'd like to know if there is another, more robust way? Like an onconnectionestablished javascript event or something.
View 2 Replies View RelatedI want a program (shell script) to be executed as soon as my DHCP connection is established successfully. Is there any way I can do this ?
View 2 Replies View RelatedI have created the following script
Code:
#!/bin/sh
interface=`ifconfig | grep -iE "(wlan0|gprs0)" | awk '{print $1}'`
[code]...
my netbook shares it's wireless connection to my desktop. i've done this through the gui (edit connections > eth0 > ipv4 settings > shared to others) and it has worked for the last i don't know how many months.recently it had become a bit touchy with regards to how it was set up. it didn't work unless the netbook was already booted and wired in at the time of booting the desktop.now however it's gotten even worse and all i get when i connect them together is
"connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" and so on.
Ubuntu 11.04, wireless adapter BCM4312.The connection works for a while, for a random length of time from a few minutes to a few hours, then stops working. The laptop says it's connected, and the router says it's connected, but the browser can't find any Web pages, it can't find the router, and there is no response to pings from the router or any other device on the local network or on the Internet. "Host unreachable." When I try to ping to the laptop from another one, it times out.If I shut down the computer and try again a few hours later, it works fine again for a while, then after a while it stops working again.
In case it's relevant, sometimes when I restart networking from the command line, it says "ignoring unknown interface eth1=eth1," even though ifconfig -a lists eth1 as up with an ip address. eth1 is the wireless adapter. Another laptop with Ubuntu 11.04 connects to the same router with no problems.Using a fixed IP address doesn't change anything.
I've installed 10.10 yesterday on my old HP Pavillion ze2000 as dual boot with windowsXP and the wireless was working normally, I've updated everything it asked to update, rebooted a few times due to some of the updates. Today when I turned it on it was connecting normally to the router, though when I opened mozilla or tried to ping the router IP on the network tools neither have worked. Couldn't open any site on mozilla or ping any ip although it says I'm connected to my wireless router as it would normally. When I open into the XP my firefox there works just fine.
View 3 Replies View RelatedI had recently installed Ubuntu 11.04 (64-bit) and I have trouble loading websites. I use a DSL (PPPoE) connection from NetworkManager to connect to the internet. Some sites like this forum site, stack overflow, etc. do not load. Firefox 4 says 'loading...' and then finally times out. I can ping these sites though.
I tried 'wget stackoverflow.com' and Lynx both timed out. wget sends out a request and waits a long time for response before timing out. These sites load perfectly well on my Fedora 14 (64-bit) & Windows XP installations and both these OSes have Firefox 4. From this I assumed that this is not a problem with Firefox (or any other browser for that matter) but it has got something to do with the network configuration.
I faced the same problem with Ubuntu 10.04 too. I use a Dell Inspiron N5010.
I am using Ubuntu 10.04, when connected to the ethernet through , Atheros Communications AR8152 v1.1.I can successfully access the internet. But when I try to use the wireless I can connect to the network using Atheros Communications AR9285, but can't access any internet sites. Or ping any other devices on the network.I'm using an Acer Aspire One D260
View 1 Replies View RelatedI am using Fedora 14 and i am unable to open a few sites e.g
[URL]
I read in the forums that this could be bcoz of ipv6 and i have disabled it(or so I believe )
but still i'm unable to open the site.. the page loads half and gets stuck ...
*I'm an Ubuntu karmic user
*I use Firefox us my default browsers , along with chrome $ opera.
*but there is problem with some sites which is not supported by the browser when i open these sites this text will appear " you need internet explorer 5 or later to open this site"
*i try to use IE tab inside Firefox but it not support my platform .
* i don't want to use wine for installing IE because i don't like it.
more exp.i have registered to an Arabic forum . when i want to post anew thread . it tell me to install IE 5 or later . i think the forum was built by asp language
so any one give me help no matter for any other browser , opera ,chrome.
The problem that I have been struggling with is while connecting to VPN server, I can't connect to other sites.
I am on 11.04, but this have been happening on 10.10 as well.
On Win7, I was able to browse the VPN and the other sites at the same time without any issue.
I also tried by checking ON the "Use this connection only for resources on its network" option (under IPv4 settings tab) but doing that is allowing me to browse all sites except the VPN site. The method that I am using is "Automatic (VPN)".
Need your help to solve this issue.
Unable to access our site via eth0. Can access the same site, via same ISP on wireless laptop, or via eth0, but using ip annonymizer service. Have a feel that it could be something obvious, but after digging through Modems firmware I am running out of ideas
View 3 Replies View RelatedDM9, 2GB RAM, 32GB SSD, Ubuntu 10.04 UNR.At Panera and at my local library there is a page that comes up when I try to connect to the Internet that is an agreement page. It comes up with my iPod Touch and with my MacBook. Using my DM9 that page does not come up for me to sign in so I can't get on the Internet.I have had Firefox and Chromium running at different times with the same results. When there is a WEP password or no password it connects. What do I need to do to get connected to the Internet at Panera and the like?
View 8 Replies View RelatedA few days ago my wireless windows vista computer internet was running slow so i reset the modem. Then I went on the internet on my ubuntu machine machine and went to www.google.com and couldn't connect to the server so i tried linuxquestions and i couldn't connect but i could ping sites. My wired and wireless windows computers worked fine. So I called Comcast (my ISP) and said it was a router issue. So I looked online and it said to disable IPv6 on firefox so I did but that still didn't work.
View 12 Replies View RelatedI am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedCurrently I use openSUSE but the 6 months release cycle is starting to bug me a bit so yesterday I have tried Debian Testing daily snapshot created on 20-11-2010, using KDE desktop (I am a KDE fun). All goes well until I try to make a pppoe using KDE's module network manager.
I created the pppoe connection with user and password but I got 2 problems:
- After I have created the connection it doesn't appear along with "Auto eth0" above the button manage connections.
- The pppoe connection is not established (both password and username are correct).
I know that I could use pppoeconf or ceni for that matter, but I am new to debian as I where new to openSUSE 4 years ago and I am still learning, so please don't tell to use them I just want to know if there's a way to use network manager from kde 4.4.5 to establish a pppoe connection (you could name it the GUI way, no worries I like using the console as well). Under openSUSE I have a program called qinternet that helps me with pppoe connection is there something similar under Debian?
A few weeks ago I decided to install Ubuntu and try it. I was really exited about running Ubuntu in my computer. I was all fired up about the new software I installed. I found that I needed an internet connection to get additional software.
So my first task was to get an internet connection, I did a lot of research about this subject and I encounter small but a lot of difficulties.
I was trying with an internal modem in my computer and with a WiFi antenna with no success.
I don't want to give up, at least not yet, I hope that someone in this forum can lead me to get a successful internet connection.
The equipment I am using is as follows:
Computer Compaq
Internal modem
WiFi driver in tar.bz2 format.
This is the WiFi description: External Antenna USB WiFi Wireless IEEE 802.11G/B WLAN 54Mbps Network Adapter USB2.0 Wireless Lan USB Adapter for Laptop Noteook Desktop PC Suport Vista/Windows 7(32bit & 64bit)/Linux.
I've been wondering about how I can change settings on the notifications that show on the screen when a wireless connection is established, when I get new mail, etc. They look a lot like growl notifications from OSX, but clicking on them doesn't show me anything. If someone could explain a little about what they are/do
View 2 Replies View RelatedI just downloaded ubuntu 10.10 on my asus eee pc 1015pem. Everything seems to work fine but I have really a hard time to get my wireless working. The appropriate driver seems to be installed and active. My router is ok, too (Netgear WPN 824 v2). However, when I try to enter my wireless password and try to open the internet with Firefox then the web browser is offline and I cannot get internet connection. Connection with the ethernet cable is fine.
View 8 Replies View RelatedIts a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View RelatedI seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies View RelatedI managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection