Ubuntu Networking :: How To Use Multiple Vpn Connection
May 1, 2011i have a problem in ubuntu and that's "how to connect to multiple vpn Connection at the same time ? " it's so important for me .
View 1 Replies
ADVERTISEMENT
Ubuntu Networking :: 9.10 - Multiple Wireless Connection - Disconnected
Feb 16, 2010Since I have started to use Ubuntu 9.10, I have had multiple wireless connection troubles. First of all, it says the signal is 2 bars, when in fact my router is right next to me as of right now. Second of all, when I try to connect to it, it asks for my password 3 times, then says disconnected. I'm on a hardwire right now, it's across my keyboard, and I'm in a tangled mess.
View 2 Replies View RelatedNetworking :: Working With Multiple Network Connection?
Jul 29, 2011I have a pc running Ubuntu 10.10 with 2 wired net card and 1 wireless card, all of them connected to a router through which connected to the internet. My question is when I launch a connection, such as ping or visit a website with browser, which one connection the system uses or both of them? Can I manually specify one connection to use? How to do it?
View 3 Replies View RelatedNetworking :: Extremely Slow Ethernet Connection On Multiple Distros
Jul 9, 2011the title says I have painfully slow(connection times out when loading google) ethernet connection on my new pc. This comp had similar problems with the OEM windows 7 install but now it's strictly a linux box so I'm anxious to get it fixed.
I'm running Ubuntu 10.04 and Slackware 13.37, and have wireless working on Ubuntu but haven't set it up on Slack yet. The only thing I've done so far is try to change speed and duplex using ethtool but it didn't work, the settings stayed the same. I'm writing from another comp so I'll do my best to post any info you request but I'll have to use a flash drive lol
Networking :: Multiple Eht0 Aliases - Use Specfic IP For Client Connection
Jul 13, 2009I have a webserver setup, where i need the server to have multiple eht:0 aliases in order to do some SSL-vhosting and other stuff.
The servers eh0 is set up in /etc/network/interfaces (its an Ubuntu)
And i have added the eth aliases with : ifconfig eth0:1 123.231.213.123 up command.
This works great, i can use the additional IP�s for the SSL-vhosts, and all is good.
My problem now is that while the server itself has 1 IP, (and approx 20 IP on alias interfaces) it uses random (i think) IPs when it is to connect to other servers. E.g the main problem is that if a Vhost on the server sends out an email, the server uses a wrong IP in the headers. Thus making it seem like the email is coming from another IP than then on the Vhost it�s currently residing.
Currently, when the server connects to its smarthost in order to deliver emails, It connects from the IP that is bound to the eth0:0 interface, and not the IP bound to eth0 which is desired.
The question now is how do I sort out the IP�s so that all connections the server makes as a client, will use the first (Eth0) IP ?
And all the extra IP-adresses will only be used as "server addresses" not to make client requests.
Networking :: Netstat Shows Multiple Identical Instances Of Connection
Jan 4, 2010We are running a combination of Apache-2 with mod_jk connecting to tomcat workers running on separate hardware.Strange: "netstat -tn" on the Apache server outputs identical combinations of source address, source port, destination address and destination port.
Has anybody else experienced this phenomenon? (I googled and searched LQ but couldn't find anybody else reporting this)Is netstat broken, or is there another explanation?
Networking :: Multiple FTP Upload Socket Error "Connection Reset By Peer: Socket Write"
Jan 31, 2010I am pragmatically trying to upload a list of files from my client machine to a proFTPd server I have running on Ubuntu. Every time I get several (around fifty) files into the transfer, I get the following error: Quote: Connection reset by peer: socket write error
I am able to remotely upload 25,000 small files of ~ 1K in size, but when I go to upload hundreds of 2-4 Mb files, I get a socket write error. Am I using up all available sockets before they can be released? If so, how do I release the sockets? If not, what does this error mean and why am I getting it?
Networking :: Ping Multiple Devices Via Multiple NICs?
May 20, 2010I have an old pentium 3 computer that has ~7 NICs installed. These NICs are attached to modems and other networking equipment. According to the linux ping page on computerhope.com, it seems that one could send a ping from a certain specified NIC. How would one go about this?
View 6 Replies View RelatedCentOS 5 Networking :: Multiple Nics With Multiple Gateway ?
Jun 16, 2009I have a CentOS 5.3 box with three network interfaces in it. Each interface is attached to a separate VLAN and I want traffic to stay on each network segment.What I can�t figure out is why I cannot get each interface to have its own gateway and everything gets sent through the default gateway.The basically takes my possible 3Gb total bandwidth and throws it down a single 1Gb pipe.Then on top of that, if I take down the interface (ifdown) that has the current default gateway,I loose contact to the other two interfaces.When I look at the routes, each one of the interfaces shows the gw as 0.0.0.0 and defers to the default route. So I delete the route and try to add a new route with:
[root@testsan ~]# ip route add 10.1.15.0/24 via 10.1.15.1 dev eth2
but end up with the error:
RTNETLINK answers: Network is unreachable
[root@testsan sysconfig]# cat network
NETWORKING=yes
NETWORKING_IPV6=no[code].....
Programming :: Use Curl And Spawn Multiple Connection At A Time?
Jan 24, 2010I am using a perl script which uses curl in the background to download files from rapidshare premium,one file at a time. I wanted to know is it possible to use curl and spawn multiple connection at a time,to download the same file in multiple parts?? I don't seem to find an option in curl which does that.
View 1 Replies View RelatedUbuntu Networking :: Setting Up Bluetooth Connection Between Two Computers Throws Connection Refused (111)
Apr 3, 2011I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
Ubuntu Networking :: Wireless Network Connection Active But Still Not Internet Connection?
Jan 24, 2010Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
Ubuntu Networking :: SSH Connection - Router Works To Except Connection Requests
Jul 28, 2010I'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?
Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?
Ubuntu Networking :: No Wireless Connection Despite Being Told Connection Active?
Jun 11, 2011My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
Fedora Networking :: 11 - Share My Internet Connection With Wireless Connection
Jun 21, 2009I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
Networking :: Connection Destroy Time With Net Filter Connection Tracking?
May 13, 2011When I have video running and the video stops, I see that the connection is destroyed in about 5 seconds, which is what I want. If, rather than stopping the video, I pull the plug, I have seen it take 350 and 380 seconds before the connection is destroyed. Why is there such a large difference in the time to destroy a video connection between stopping the video and pulling the plug on it when using net filter connection tracking? How can I shorten the time for the connection to get destroyed when pulling the plug?
View 3 Replies View RelatedNetworking :: Use The Laptop With The Wireless Connection To Share The Internet Connection?
Feb 4, 2010I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedNetworking :: Setup PPPoE Connection To Establish DSL Connection?
Apr 23, 2010I'm trying to setup PPPoE connection to establish my DSL connection, but I got
Code:
pppoe[3885]: read (asyncReadFromPPP): Session 4479: Input/output error
pppd[4104]: Cannot determine ethernet address for proxy ARP
in my sylog file.
When I do pppoe-start, it connected but I cannot ping into any destination (even to my modem in the same network). DNS servers are explicitly set in pppoe.conf and resolv.conf. Did I miss anything?
Networking :: Openvpn Connection - Can Not Ping When Connection Established
May 8, 2010I have problem in making connection to my vpn server I can make connection from windows xp to that but can not open any website and I can not ping 172.16.10.1 when connection established.
These are my configuration files:
server config file:
Quote:
client configuration file:
Quote:
And this is my server syslog tailed file:
Quote:
And I added this routing to /etc/rc.d:
Quote:
And this is my iptable:
Quote:
And vpn connection is lost after establishing a lot.
Networking :: Shows Connection But Not Connected / "connection Information" Shows A Varying Percentage Of Connection?
May 26, 2010I have just installed ubuntu 10 on a thinkpad t410. At first everything worked swimmingly, INCLUDING the wireless. After about five minutes, the wireless stopped working, in that it seemed to think it was still connected but pinging didn't work. I've now restarted several times, and each time I restart, the wireless works for about 1 minute, then stops working. If I try to disconnect and reconnect it will not reconnect (until I restart, that is).
iwconfig shows the correct ESSID and ifconfig shows an address, and "connection information" shows a varying percentage of connection.
Networking :: Test Thespeed Of The VPN Connection Or The RDC Connection?
Mar 26, 2010I connect to my work with GRDC through a VPN. All worked fine until yesterday. IT is now very slow. Could this have anything to do with the fact that Update Manager was only able to do a partial upgrade?
I use Ubuntu 9.10 I tried the RDC on a Win XP machine and the speed is normal, so I don't think the Remote Desktop Server is the problem. Is there a way to test thespeed of the VPN connection or the RDC connection?
Ubuntu Networking :: Use Putty Connection / "Network Error: Software Caused Connection Abort"?
Feb 9, 2010I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
Ubuntu Networking :: Networking Involving Multiple IP Address Types - 192 And 172?
Jul 6, 2011I have one router, a linksys. It allows wireless and wired connections, as is normal. I have two XP machinesby wire to the router and three linux machines connected wirelessly. The XP machines both have IP addresses beginning with 192.168. while my three linux machines have IP addresses that all begin with 172. None of the machines is connected with a static IP address. All are automatic DHCP.I am told that the above scenario makes no sense. However, such is what I have so, I trust, the theory and the fact do not gel. I would not care except that I cannot see - using the nautilus network servers program, all of the XP computers with some of my linux boxes.
View 9 Replies View RelatedUbuntu Networking :: Internet Connection: 'Work Offline' - "No Network Connection"
Oct 31, 2010I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
Ubuntu Networking :: Use Internet Connection From LAN To Share Internet Connection Through Wireless?
Jan 9, 2011I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedNetworking :: Open Connection Receive A Message "connection Refused"
Apr 6, 2010i m using RHEL5 on my server machine and open suse 10 on my client machine.both system ping each other, firewall is off of my server machine,i put a file from my client to my server machine using scp command but ftp command is not working when i want to open connection i receive a message "connection refused".what can be the issue?
View 5 Replies View RelatedUbuntu Networking :: SSH Over One Network Connection And Out To Internet On Another Network Connection
Jul 9, 2010I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedUbuntu Networking :: One NIC Multiple IP?
Jul 1, 2010I need the following:Running XAMMP on Ubuntu server with one NIC.Only the webserver has to be available on multiple IP addresses.What i have is 4 devices who communicate with server database servers.
Device 1 = Mysql on IP 192.168.0.100
Device 2 = Mysql on IP 192.168.0.101
Device 3 = Mysql on IP 192.168.0.102
[code]...
Ubuntu Networking :: Wired Networking - Connection Works But No Internet
Jun 1, 2011I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
Ubuntu Networking :: Sharing Connection - Get "connection Established" *pause* "disconnected"?
Jul 26, 2010my netbook shares it's wireless connection to my desktop. i've done this through the gui (edit connections > eth0 > ipv4 settings > shared to others) and it has worked for the last i don't know how many months.recently it had become a bit touchy with regards to how it was set up. it didn't work unless the netbook was already booted and wired in at the time of booting the desktop.now however it's gotten even worse and all i get when i connect them together is
"connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" *pause* "connection established" *pause* "disconnected" and so on.