I just can't set any proxy settings in Gnome 3 Network settings. Is it a bug or...?
I installed Ubuntu 11.04 and then used a PPA to install Gnome 3. Some other "problem" is I can't set single click opening of folders...
I am setting proxy for apt-get application in command line using xporthttp_proxy="http://usrnameasswrd@hostort"But my password contains special characters whi is mandatory in our system. the special characters are not recognised properly and it give authentication failure when i use apt-get..how do i work around this problem?? i know that i could put the hex code for the special characters so the system will recognise it properly, but i dont know how exactly, as i tried it but seems not working.
View 1 Replies View RelatedI recently upgraded to ubuntu 9.10 on my dell d830 ..everything worked great no issues. did my normal mods and packaged updates and the works. this laptop i used at work and home, at work i use a windows 7 vm running ontop of my ubuntu and at home well ubuntu of-coarse. work has a proxy setting and my home network doesnt, so i decided to create two profiles on the system > preferences > network proxy One for home > with direct Internet connect And Another for work for defined proxy settings.
Everything was cool...then the one day when i tried to install graphics card driver, it gave a "cant not resolver proxy " error...i checked my profile and it was on home...i also deleted all profiles and set it to default and it still dont work..firefox works cause you can set proxy setting directly on firefox , but now i cant do any "apt-get" because some how ubuntu is still picking up my work network proxy setting? somehow it like stuck on the work network proxy setting although i delete the profiles too...?
how do i get yum, KPackageManager to use System Proxy Settings for there network access ? by proxy i mean it's a program that uses my phone as the proxy.here is the command adb forward tcp:8080 tcp:8080
now i got it to work for firefox like this localhost 8080 for all protocols.did the same in KDE proxy settings localhost 8080 for all protocols..just need to know hot to configure yum and kPackageManage
to use it as well?
An application that supports SOCKS 5 protocol can forward its network connection over ssh and dynamically forward to any host name that you specify isn't it ? that means firebox web browser can use SOCKS 5 protocol can be used by pass proxy settings isn't it ? so how can a sys admin remotely detect if a particular user is bypassing proxy settings using SOCKS 5 protocol ?
View 1 Replies View RelatedI need to enter credentials for a system wide proxy, on a fresh install of Kubuntu 10.04. Everything hunky dory, but: Network Settings->Proxy->Authorization has 'username:' and 'password' grayed out all the time; even at 'Manually specify ...'. The only 'alternative' (not to chose from) is 'Prompt as needed'. But I don't get any prompt, and so I'm out of luck. To me, this looks like a bug. Because one should be able to enter a username and a password there, for good.
View 9 Replies View RelatedThe problem is that he did not specify exactly where in /etc/profile. I am trying to make a custom spin of F12 but I cannot do it behind the proxy as it is now.
View 4 Replies View RelatedMy college providers shifted to a different setting.. I'm not sure what needs to be done. On windows, under the connections tab you need to change the proxy settings and put in the IP address and enter the port to 3000. Questions:
1. where lies the linux (ubuntu 10.04) variant to execute the operation.
2. What can be the major obligations of such a change?
I am sure its siimple enough, but I can't get my net to work properly. The connection provided to the internet is through wireless routers.
My work uses a proxy server to mediate connections to the internet. However, changing the proxy settings in NetworkManager seems to have no effect. When I change the proxy settings in firefox from "use system proxy" to the actual proxy settings then it connects fine - but I would much rather be able to change the system proxy so that it works with all applications.
This is not confined to firefox - I have the same problem trying to use wget in gnome shell. However ftp works fine. I have just looked at the environment variables and it appears that NetworkManager is not setting the http_proxy variable (it is however setting ftp_proxy and https_proxy).
How can I edit the system proxy setting using the terminal? Which file contains this settings? I want to edit this automatically using cronjobs, cause from 8-5 I need to use a proxy, but at home I don't need the proxy. How do I fix this?
View 3 Replies View RelatedWell, as many proxy applications, GNOME Network Proxy Preferences only allow to ignore hosts. What I want to do is exactly the opposite. I only want to use the proxy for few sites. Is it possible to define only the allowed hosts in any way?
PS: I know FoxyProxy add-on for Firefox does this, but 1)I don't use Firefox and 2)I want the proxy settings system wide not only for browser.
I have a problem with remote connection over SSH and Xming, Every time I connect to Linux host from Windows I have to run gnome-appearance-settings to restore scheme settings to the one set after directly loging to Ubuntu. Otherwise, all fonts sizes and colors are set in such a way that they are barely readable. Is there a way to save this configuration so I will not have to re-set it alays after login? Ubuntu version 10.10.
View 1 Replies View RelatedI installed amarok in ubuntu karmic, I had to set the proxy settings for wikipedia and lyrics plugin to work , for that I had to edit the file .kde/share/config/kioslaverc , but now the problem is , that lyrics aren't being displayed although wikipedia and photos for the artist are being displayed. Whenever it starts playing a song, it just shows the usual message "lyrics are being fetched" for a couple of seconds and then nothing is displayed, I don't think anything is wrong with my proxy settings as wikipedia and photos plugin are working fine. Do I need some kde dependency for lyrics to work ?
View 2 Replies View RelatedI'm running proxoid (tethering app for android) which operates using a proxy server.
I set the system-wide proxy settings and they seem to work for most part except not on Google Chrome and Opera. Firefox works fine though flash is never detected. I get a 105 "NAME NOT RESOLVED" error on Chrome.
Also whenever I install something using apt-get, it tells me that the packages cannot be authenticated.
how to set default proxy settings for java? Windows allows you to do this in control panel-java. Does Ubuntu have something similar? Its causing my java apps to time out and Firefox to freeze.
Ubuntu 10.04
java version "1.6.0_18"
OpenJDK Runtime Environment (IcedTea6 1. (6b18-1.8-0ubuntu1)
OpenJDK Server VM (build 14.0-b16, mixed mode)
I have a server that i built as 9.10 Ubuntu a while ago. It's been running through a proxy server that i set as an export in /etc/profile. Recently i upgraded it to 10.04 Ubuntu.
Now i want to get rid of the proxy server. I removed the export in /etc/profile. I've tried restarting the network services, reloading the profile, rebooting the machine, setting a blank export, and a few other things...but it's still using the proxy!
I've tried grepping various folders but the only other place i can find a proxy setting is in the apt config (which i don't think would matter?).
I installed DansGuardian. In order for it to work I set the system wide proxy. However it is really easy to get around DansGuardian by going to preference proxy setting. How do I password protect this setting so it requires a password to change proxy setting? Preferably a different password than the normal sudo password if possible. If not I at least want the sudo password protecting it! I run multiple browsers so doing it via the system rather than the browser made the most since.
View 5 Replies View RelatedI'm running a Ubuntu 9.10 server with Openbox as the WM. I'm have set the proxy and http_proxy settings at /system/prosy and /system/http_proxy using gconf-editor. The settings seem to stick in gconf. The gnome-settings-daemon seems to be running fine. The problem is firefox-3.5, apt etc does not recognize the gconf proxy settings. I do not understand why firefox does not honor these settings.
View 2 Replies View RelatedI have recently installed chromium in my ubuntu 10.04.
I am facing a problem. Chromium always takes the system proxy settings, and if I change the settings for chromium then system settings change too..
I want to use different proxies in the two places.
I'm trying to use Kubuntu 10.04 in a corporate environment. Our environment uses an internet proxy that requires a username and password.Under Ubuntu 10.04, I can use the GUI to set the proxy host, port, username and password. When I do this, all the web browsers work, Snyaptic works, etc.However, under Kubuntu 10.04, the GUI lets me specify a proxy host and port, but doesn't appear to save the username and password. Because of this, I have to manually set the proxy information on my web browser, but the package managers don't work because they can't access the internet. Apparently the ability to specify proxy username and password is either broken or unfinished.
View 4 Replies View Relatedi am using ubuntu 10.04 i want to know how to authenticate the proxy settings for the terminal to install and d download package.
View 1 Replies View RelatedI think there is an application which lets you set the proxy settings for all applications. I remember seeing something like this in Gnome's network menu but now I'm using XFCE.
View 1 Replies View RelatedI am using ubuntu 11.04. I want to know that how can I set proxy settings for Transmission bittorrent client?I fill the settings in network proxy but it won't work for bittorrent.
View 4 Replies View RelatedCurrently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
I installed openSuse 11.4 (KDE). It was excellent - everything was working great except for Subversion which use to work fine on 11.3 (command line is broken on 11.4, Eclipse/Subclipse works fine on both).
Subversion kept going to the proxy server instead of going directly to our internal Subversion server. I tried (1.) setting the proxy settings in Yast with excluding for our Subversion server, (2.) tried adding the usual settings in ~/.subversion/servers (which worked fine in 11.3). I could not check out on the command line from the local server, I can check out from external servers, eg: Google.
(I installed from the live CD download. I think this is using something some plasma widget thing for the network management.) Why is Subversion not using the usual ~/.subversion/servers file for its settings in 11.4 (KDE)? What is it using and how can I make it not use the proxy server? (Someone else mentioned his Subversion only started working after he used some Chrome plug-in to change the proxy settings but had no idea why?)
If I configure my OpenSuSE 11.2 system to use a proxy server in the YaST Proxy module, do I still need to configure my browser (i.e Firefox) to use these proxy settings, or is it done automatically under the covers?
View 1 Replies View RelatedI want to set the HTTP_PROXY and HTTPS_PROXY and http_proxy and FTP_PROXY environment variables "somewhere", so all programs that recognise these can find them. I need root to find them for slackpkg and sbopkg, I need users to find them for Dropbox, I need them for cronjobs and scripts and wget.So I want to set these environment variables up somewhere, preferably something in /etc and have them set and accessible for everyone and everything. I am not using KDE or XFCE or any desktop. I need a command line solution.
Where is the best place to put this? I see that some other distros have a /etc/environment and these variables go in there. In Slackware, should I add them as a new file in /etc/profile.d and have them added every time /etc/profile is accessed? Is there a Slackware approved method that I don't know about?
SPM has just two options 1. Direct connection(no proxy) to internet and 2.manual proxybut my firefox cannot connect to internet with no proxy, It can connect to internet only on auto-detect proxy settings option.Right now my SPM is not working. I can ping the SPM server from my console but apt-get is not working
View 3 Replies View RelatedI am having a few websites running in a Reverse Proxy scenario on Ubuntu Server 10.04. The configuration is like this:
Code:
|--------------192.168.1.1
| (site1.abc.com)
|
|--------------192.168.1.2
| (site2.abc.com)
|
|
|
|
|--------------192.168.1.3
| (site3.abc.com)
|
|
|
|
|--------------192.168.1.4
| (site4.abc.com)
(Public IP ) |
A-------------------|
(reverse proxy server) |
(192.168.1.25) |
|--------------192.168.1.5
| (site5.abc.com)
|
Except one all websites are running properly and being redirected to their respective domains.
Following is the configuration which I used for each site define on server A a vhost file which contains following
Code:
# ProxyPass / http://<Ip of Server>
# ProxyPassReverse / http://<Ip of Server>
So if I have 5 websites then I have 5 vhost file on the gateway in above diagram A and in each of those file as above root of site is redirected to internal IP. 4 of them are running properly. The fifth website is running on port 8080:/keyword. So in its vhost file on gateway I defined
Code:
# ProxyPass / http://<Ip of Server>:8080/keyword
# ProxyPassReverse / http://<Ip of Server>:8080/keyword
I can see on Lan http://<Ip of Server>:8080/keyword but when from internet I try to see:
http://site5.abc.com
I get redirected to a page is https://site5.abc.com:8443/ and it says
Code:
The webpage at https://site5.abc.com:8443/ might be temporarily down or it may have moved permanently to a new web address. The site5.abc.com has a requirement to be run at port 8080 internally and it is not a Ubuntu server.(Red Hat based server). While rest all are Ubuntu servers including gateway A.
How to work teamviewer properly on linux in proxy server settings?
View 1 Replies View Related