Updating Synaptic with authenticated proxy settings make it works.However, apt-get command line tool does not work.[URL]Which program is responsible for updating such file ?
View 1 RepliesI'm using 9.10 Ubuntu Karmic 64-bit (but same thing happens on my 32 bit VM on same PC).
My /etc/resolf/conf file is not updated with DNS information on first boot. The DNS information is in the /etc/network/interfaces file.
The trick I have to do every time I reboot the PC is:
Code:
sudo ifdown eth0 && sudo ifup eth0
First off, why? Second how can I resolve this issue?
I have three NICs eth0 and 1 are normal LANs connected to the internet, but I choose eth0 as the primary. eth2 is a local private one. the DNS information from eth0 should be in the resolv.conf file but isn't. The file is empty at bootup, except for some comments instructing me not to edit this. After running the above sudo commands the file is properly updated and internet works.
Here's my /etc/network/interfaces file's contents:
Code:
auto lo
iface lo inet loopback
auto eth0
#iface eth0 inet dhcp
[Code]...
I am using kubuntu 9.10 64-bit on AMD M500 machine i removed networkmanager (because i had frequent disconnect) and installed wicd but the /etc/resolv.conf had a comment on top which says that it is to be configured by networkmanager (still) I put the DNS in there manually and it works What to put in there so that it uses DHCP ? Maybe its set to be not written by anyone other than networkmanager ??
Vuze downloaded an update, and now everytime I use it keeps telling me to re start for the update to have an effect. When I re start, same thing happens again tells me it needs to restart. I'm using Gnome and openSUSE 11.3. I checked older posts for a solution it seems this has happened before. Do I just wait for a new version to come out of the repos?
View 1 Replies View Relatedwe're about to migrate a set of workstations (ubuntu 10.04 LTS) to a new kerberos/LDAP setup. Basically, this requires the installation of some required deb packages and to copy some new .conf files over the original ones.We made a deb package having these "features":requires the needed other packages as dependenciesbacks up original conf filescopies the new conf files to the right places (i.e. /etc/krb5.conf,/etc/ldap.conf)The problem is: apt-get complains because the deb is "touching" files owned by other packages (kerberos, ldap, etc.). Therefore, the only way to skip this check is either to force apt-get to proceed or using the "replaces" directive in the deb control file, specifying the clashing packages. omething like this:
Code:
Package: <package-name>
Version: 0.9.9
[code]....
I just made a minor change to the smb.conf file, is there a way to force the samba service to read that change without restarting samba completely?
View 6 Replies View RelatedIs there a way to refresh the current configuration used by modprobe with an updated modules.conf file at the command line for Red Hat Linux 9.0?
View 1 Replies View RelatedI updated to 10.10 and still cannot get wireless at all.
Output LSMOD
output lspci
iwconfig
Well it seems like every 5 min the update manager is barging in telling me to update so I did last night and then this morning I turn on my computer and a window pops up that says "wicd needs your password" or something to that effect so I put it in. Then I notice wicd is not running. So I click on it in the menu and it pops up in awn for a second then disappears. As I have said before I am fairly new to linux so Im having trouble figuring this out. I don't know any commands i should run or where to start even. My computer is not much use to me without the internet so I would really like to get this fixed.
View 2 Replies View RelatedAll my other systems work fine, tried setting mtu to 1492. Everything is set manually in network connections. Tried deleting and making a new connection. I set the dns servers in the /etc/resolve (don't remember the exact path.) I can ping servers fine. This was a fresh install of 9.10. Again, the internet worked fine until I installed the updates from the update manager.I had internet problems when I first started using ubuntu a couple years ago.
View 1 Replies View RelatedI can connect to the internet and browse. I'm wired and using DHCP on a Windows network. Updating Ubuntu or downloading programs takes hours for 52MB of updates. Why? I read some articles that mention Network Manager needs to be enabled at the .conf file. Can I edit this using GUI or command line only?
View 9 Replies View RelatedI started another thread on this (URl...), but the topic was not specific to what I now know the problem to be. So Ive started a more appropriately titled thread.In my local network I SSH (via Putty) to my Ubuntu 9.1 server and the tunnel a VNC connection through to it. No problems at all. I forward port 5900 through SSH to do this. My local servers have port 5900 blocked, so I know it is tunnelling correctly without trying to access port 5900. I cannot VNC directly to port 5900, as I would expect. Everything works just as expected.
When I SSH external to my router a I use a virtual server connection through port 22. This works just fine.I then start a VNC session, in the exact same way as I do localy, tunnelled through port 5900. Specifically I tunnel port 5900 to my.router.public.ip port 5900. However when I start up VNC it times out. The reason is that my firewall blocks a request to my routers public IP address from port 5900 on the server running SSH as follows :I have tried this both with the Ubuntu built in desktop and with x11vnc. Both give identical results. When I start x11vnc I tell it to listen on port 5900. This, as explained above, wokrs just fine in my internal network and does NOT put out any requests on port 5900.
I used the "Upgrade" option the last couple of nights to go from 8.04 LTS and was going to go to latest version. Well got the upgrade done last night on 9.10 and now Broadcom gigabit wired connect will not connect to internet. Can ping router just fine. Just cannot get outside of it. Shows as configuredin ifconfig. But the name of it under the network manager is odd. Its ifupdown (eth0) (default) and maps to ent1.
View 1 Replies View RelatedI recently updated my ubuntu to the newest version 10. I have a DSL router with a password. When I try to connect to the net it will try to connect for about 5 or so min then say that I am disconnected. I cannot remember what option I had before to connect but its not on this version.
View 4 Replies View Relatedi have ALFA AWUS036H 500mw wireless card which uses RTL8187L chipset. Ubuntu 9.04 and 9.10 come with preloaded rtl8187 driver but they DO NOT work for internet surfing. However they do work with aircrack suit for injecting etc. Specific problem is: They only work with really close ranged AP, anything far and you will have random disconnects or inability to connect. So basically its unstable compared to patched driver.
To get this alfa card working for internet access, the only way currently is to use any LInux distro with Kernel 2.6.30 and lower. Starting from Kernel 2.6.31 they have made some changes to net api structure which wont let you patch the driver with the patch available at aircrack website which is normally used to make this driver suitable for internet browsing. Refer to this thread for more info: [URL]... I am currently using backtrack 4 pre final but i was going to install kubuntu 9.04 till i recieved an email from realtek with a new driver that compiles in kernel 2.6.31. I tested it on Kubuntu 9.10 and it compiled fine but i could not make it run. Under NetworkManagement for Kubutnu, the problem is that it keeps asking for WEP key and gives me the message 'wlan4 failed to connect' instantly after i enter the key, so its possible that its not compatible with NetworkManagement. I havent tried it with wicd yet, it may work........
I want to know from which configuration file , will apache take the environment variables ? In one of the test.php file , I added phpinfo() and saw that, PATH variable shows :
PATH/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java5/bin:/usr/java5/jre/bin:/usr/contrib/bin:/opt/freeware/mysql/bin
I want to add another path in this PATH variable. I tried to edit the /etc/environment file , ~/.profile file , stopped and started the apache server (httpd) , but still I am not able to see the PATH variable updated . Can anyone please help me out to know where should I make the changes to get the PATH variable updated ?
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies View RelatedI'm trying to set up samba. I am editing the smb.conf.master file, and then using the testparm -s "smb.conf.master > smb.conf" command to make the smb.conf file. I am running this command as root. However, the smb.conf is not updating with the changes I am making. Does anyone know why? It just stays the same no matter what I change. The only way to change it is to edit the smb.conf file itself.
View 1 Replies View RelatedI have setup an OpenVPN server on Ubuntu server. I am able to connect with Windows clients. I am, however, unable to correctly connect using Ubuntu.
If the router firewall is blocking the pings to keep the connection alive, then the connection initially does not work, but will work after the first timeout and reconnect. If the firewall does not block the pings then the initial connection attempt never times and therefore the connection does not work.
Attached is the readout from the client.
The first attempt gives error ERROR: Linux route add command failed: external program exited with error status: 7
Successive attempts work, they just time out every two minutes.
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
After upgrading my Sony VAIO from Fedora 12 to Fedora 13 my NFS shares don't seem to be working correctly. First of all, mounting them via /etc/fstab is quite slow now. More importantly, When I transfer files from my laptop client to my NFS share, the owner/group on the client become "nobody". However, on the NFS server, they are both "root". I am using a script containing "cp" commands to perform backups of certain directories, retaining original owner/group info. Since the Fedora 13 upgrade, the script complains with each file that it was unable to preserve the information, and the end of the line always contains "Invalid argument".
As a last resort, I upgraded the 'server' (a 64 bit version) from Fedora 12 to Fedora 13. There has been no improvement.
Starting today I cannot log into [URL] on Linux. Whenever I try to login, it just takes forever and then either Chrome or Firefox tell me that perhaps the site no longer exists. It works perfectly fine on Windows. Strangely it also does not work on my Roku box and is working sporadically on my PS3. I would think it was my ISP or my router if it wasn't working perfectly fine on Windows.
I AM NOT TRYING TO WATCH NETFLIX ON LINUX. I know that doesn't work. I'm just trying to update my queue. I'm having this problem both on Fedora and Ubuntu (latest stable releases on both). I know it's not just loading from cache on my Windows machine because I'm going to pages that I have never been to and it's working just fine. Now, I have not tried signing out and in because then I'll be up a creak. OK, I installed another browser on my Windows computer and I'm able to sign into Netflix just fine. So it's not a sign-in issue.
WHY DOES THIS WORK ON WINDOWS? It's the same browsers - Chrome and Firefox on Linux and Windows and the same network.
ALSO, flickr is not working correctly - I cannot make any comments in the discussions (but can on photos which is ajax-y).
update: also checked a Linux computer using Linux Mint that hasn't been turned on in 2 months. I know it was able to access Netflix back then. Nothing has been changed - not even updates. It also cannot access Netflix. Either taking forever to load [URL] or when trying to login.
via looking in Konqueror, I saw it's trying to go [URL] and that's what makes it so that I cannot connect to [URL] if it considers me to be signed in. And here's what Konqueror said:
The requested operation could not be completed
Connection to Server Closed Unexpectedly
Details of the Request:
URL: http://movies.netflix.com
Protocol: http
Date and Time: Thursday, February 24, 2011 22:56
[Code].....
Since latest large update to CentOS 5.3, which also upgraded to 5.4, I have problem with dnsmasq. CentOS is real server on real hardware (not virtual). I use dnsmasq as dhcp server as usual. On hardware startup or reboot, these lines are included in /var/log/messages
Nov 2 19:06:16 server avahi-daemon[2965]: New relevant interface eth0.IPv4 for mDNS.
Nov 2 19:06:16 server avahi-daemon[2965]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.1.
[Code]....
I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System -> Administration -> Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong?
Some information about my system:
iwconfig
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wifi0 no wireless extensions.
ath0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
[Code].....
I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck
I have the following problem: There are three NFS mounts in /etc/fstab, which are automatically mounted. The network connection runs over NetworkManager. Since NWM brings up the network asynchronously, NFS doesn't mount correctly on the first try, but is loaded soon enough since mount automatically retries until it works.
I can live with the fact that I have an error in my boot messages, since everything is up in time for the user. But, I need a (selfmade) upstart script which depends on the NFS mount being up. Even using "remote-filesystems" as the trigger doesn't help, because the trigger is apparently sent after the first failed try (I checked with cat /proc/mounts in my script, the nfs mounts are clearly not up.) Can I somehow force the remote mounts to wait until NWM is up, or make the NFS mount emit an event when the mounts really get mounted?
fc14 do not handle nis info correctly when showing my network homedir. It is shown as "nobody nobody". Local files are shown with correct UID:GID
When I log in on an RedHat el5 machine (on the same network), every thing is ok, but when I log in on a fc14 machine my network homedir files are shown as "nobody nobody"
My homedir is placed on a REDHat el6 and using nfsv4
Does anyone have a clue as to where configuartion can be changed?
I am running a centOS 5.5 server and can't synchronize with time servers via ntpd. My server sits behind a firewall with only port 80 open and I suspect this is the issue. Do I need to open other ports to connect to the time servers at [URL]?
View 4 Replies View RelatedHow can I keep /etc/resolv.conf static ... as in preventing it from being changed by the network manager ... without actually disabling the network manager (so wireless users can get their wireless setup that includes IP address, but leave the resolver configuration as is)?
View 1 Replies View RelatedI'm running ubuntu 10.04 and I need to set up samba. I haven't used samba since ubuntu 8.10 and I don't know if there have been changes that I'm not aware of. I remember it being a simple process that started with editing the configuration file, but I keep getting this message:
Code:
/etc/samba/smb.conf': No such file or directory
Am I missing something? Has the configuration file changed names?