I have a Dell Vostro 200 with the above wireless card in it and I cant get it to work. I have been on Intel's website and downloaded e1000-8.0.18 and installed as the instructions. But it is still greyed out on the Network Manager. I have just installed Ubuntu Desktop the latest current version.
View 1 RepliesI have a new Thinkpad t510 laptop with an intel centrino wireless N card (no bluetooth). I installed ubuntu a couple weeks ago after I got another hard drive in the expansion bay. I have the drive partitioned into two sections, 250gb for file storage, and 250gb for the linux OS. Currently no other OS is installed on the other harddrive.
I have had everything perfect for the past couple weeks, but once i installed some updates today, my wireless fails to work now. Just some general info that you might ask me, lspci | grep Network, returns
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Furthermore, on the top right of my screen, my wireless is grey'd out and says no network devices available on hover.
[Code]...
Im trying to connect to my college wireless network. I have looked a thinkwiki and no one has posted any bugs. Any ideas on getting it working again?
I'm dual booting windows 7 64 bit and Ubuntu 10.1 64 bit on my Dell Inspiron 11z with an embedded WiMAX/WiFi Link 6050 series wireless card made from Intel. I only use it for wifi, not 3g or wimax. I installed the latest driver from intellinuxwireless.org, iwlwifi-6050-ucode-41.28.5.1, but it still doesn't seem to work. I ran these terminal commands from another thread:
cd Desktop/wlwifi-6050-ucode-9.201.4.1
sudo cp iwlwifi-6050-4.ucode /lib/firmware
sudo chmod 644 /lib/firmware/iwlwifi*
[code]....
After running "sudo rmmod -f iwlagn sudo modprobe iwlagn", I get this read out for my wireless card.
*-network DISABLED
description: Wireless interface
product: WiMAX/WiFi Link 6050 Series
vendor: Intel Corporation
[code]....
In the ubuntu help section it tells me to flip a manual wifi switch to enable it, but pressing my windows wifi button, F2, doesn't appear to do anything while in ubuntu. The only experience I have working with linux is typing some terminal commands on my android phone to root it.
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
This is a fresh install of Ubuntu 10.04 on a Dell XPS M1530. I'm getting very frequent disconnects to my wireless network, despite good signal. I have wicd and nm-applet running side by side, wicd doesn't work by itself and nm-applet won't get a new IP after reassociating with the AP.
Wireless connection is steady in Windows 7, so I'm guessing it's a problem with the driver.
Wifi card: 0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Driver:
Code:
[ 22.889588] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.32-21-generic-ks
[ 22.889592] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[Code].....
Intel 5100 wireless card doesn't connect on 10.04?
View 1 Replies View RelatedI upgraded the wireless card in my laptop (sony VAIO CW) due to the original Atheros being incurably slow.The new card is an Intel 6300 ultimate n. In Windows 7, after installing the relevant drivers everything worked without a hitch.In my Ubuntu 10.04 installation, however, I have been unable to get it working.Initially I had the compat-wireless modules installed (linux-backports-modules-wireless-generic), as I had done so to try and get the Atheros card working better. I tried removing all of these, and that made the difference that iwconfig now (instead of nothing) listed
Code:
wlan1 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm
[code]....
I'm running Ubuntu 9.10 on a Gateway M520 laptop, and after failing to get the Broadcom wireless chip that came with it working I swapped it out for an Intel PRO/Wireless 2200BG. Unfortunately, I haven't been able to get wireless to work. The chip doesn't appear to be turned on (it is detected though), and the hotkey to switch wireless on/off (Fn+F2) doesn't work in Ubuntu. I also am not sure if I have the proper drivers to get the chip working with Ubuntu, and I'm not sure how to figure that out.
Since I've noticed it's asked for a lot, here's the output for iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
eth2 radio off ESSID:off/any
Mode:Managed Channel:0 Access Point: Not-Associated
[Code]....
I'm new to linux. I've just installed Ubuntu 11.04. It has all been going ok, but the wireless just stopped working all of a sudden. The indicator light turned off and when I tried to turn it back on (Fn+F2) nothing happens. Sometimes, when I restart the computer, the wireless might work; but if the signal is lost the LED on my laptop turns off and I cannot reconnect. Also, in these strange cases that the wireless works when I restart I can manually turn it off (Fn+F2), but nothing happens when I try to switch it back on.
In the menu on the upper right corner I see 'Enable Networking' is checked, but 'Enable Wireless' cannot be modified.
I have a Dell Inspiron 6400 and the wireless device is an Intel Pro/Wireless 3945ABG.
I have tried to follow some of the threads on this forum on similar cases, but the ones that were comprehensible to me did not work (or I actually might not have understood them either). code...
I have a brand new Lenovo Thinkpad T402i. A very good and expensive machine, however I have just installed the latest Fedora 15 and my wiresless does not seem to work properly, I can barely ping a website. I have read it's an Intel's bug. I cannot understand how can be possible with Intel...
View 6 Replies View RelatedI've got a Dell precision with Kubuntu 9.10. Wifi worked fine on that machine for months, but stopped working last week. I don't know what happened, but I recently did an "apt-get dist-upgrade". That might have something to do with it.
When I boot in Windows, wifi works fine.
Code:
tijl@Smaug:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: 82567LM Gigabit Network Connection
[Code]....
I have a Dell E6500 with and Intel 5300 wireless agn card running Lucid x64. Wireless works fine and speeds are great except when I download with either the browser or thru a torrent or even updates. Once I get to around 100 megs in to the file wireless stops working and the only way to get it working again is to disconnect and reconnect to the AP. I have installed the back ports and tried several other fixed to get this to work but nothing has helped. One more note this happens on 2 other wireless routers that I have tried so I know that it's not limited to my Linksys.
View 3 Replies View RelatedMy wireless worked out of the box for the past few months. When I was running low on battery recently, I put the laptop to sleep. When I woke it up, there was a black screen with a flashing underscore. I pressed a bunch of buttons but nothing happened. Then suddenly it said something about a wireless hardware error and I did a hard reset by holding down the power button. When I turned the computer back on, wireless was greyed out. There's no hardware switch to enable and disable wireless and the software switch had no effect. I tried echoing into the 'state' of the adapter but it didn't let me. When I tried sudo ifconfig wlan0 up it gave me the following error:
Code:
SIOCSIFFLAGS: Unknown error 132
lspci:
[code]....
Since an upgrade from 10.10 to 11.04, all wireless devices for me in the plasma network manager applet are not functioning properly on a Dell Latitude E4310. Specific problem: No wireless networks appear in the plasma network manager applet. Manually-configured networks do not connect. A separate CDMA card appears, but cannot establish a connection. The CDMA card does function on 10.10 machines, and formerly worked on this machine. The only wireless 'network' that appears in the plasma network manager widget is 'hidden network'. Manually adding a network and checking "Connect Automatically" does nothing. I attempted a fresh install after the upgrade itself failed the work. There are no networks to click on, and selecting the device itself merely shows the status page.
Further information
iwconfig output:
Code:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key: off
Power Management: off
rfkill output:
Code:
0: dell-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: dell-wwan: Wireless WAN
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
dmesg output:
Code:
dmesg | grep iwl
[24.292605] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[24.292610] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[24.292687] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[24.292696] iwlagn 0000:02:00.0: setting latency timer to 64 .....
Here's the CDMA-specific dmesg output:
Code:
[17846.948253] usb 2-1.1: new full speed USB device using ehci_hcd and address 7
[17847.060342] sierra 2-1.1:1.0: Sierra USB modem converter detected
[17847.060650] usb 2-1.1: Sierra USB modem converter now attached to ttyUSB1
[17847.060765] usb 2-1.1: Sierra USB modem converter now attached to ttyUSB2
[17847.060838] usb 2-1.1: Sierra USB modem converter now attached to ttyUSB3
Neither the CDMA card nor any wireless networks are working. If I take the exact same machine and boot from a disk with 10.10, both work.
my platform Centos 5.3
i did the following
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
[Code]....
My wireless LAN connection on this machine occasionally stops working. The network traffic bar shows periodic very small transmissions but the failure of all network dependent applications (Firefox, package manager, etc.) indicates to me that the machine is no longer talking to the net. I can fix it by reselecting my home network in nm-applet from the drop-down list. This causes the machine to disconect, reconnect and all is well for some random period of time thereafter. Here's some data:I'm running an HP Pavillion laptop.
Code:
~$ lspci | grep Wireless
02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Code:
~$ lsmod | grep iwl
iwlagn 124768 0
iwlcore 134820 1 iwlagn
mac80211 243496 2 iwlagn,iwlcore
[code]....
I don't know if this is related or not, but a couple of months ago I unsuccessfully attempted to share a hotel's wired Internet connection over my wireless card. I may have hosed some settings or it could be unrelated.The "unknown interface" portion of the restart attempt is interesting but I don't know enough to fix it.
I'm using a Vaio TT, which seems to use an Intel 5100 WiFi chipset, and a Linksys WRT54G2 (firmwares 1.0.1 and 1.0.4), ubuntus 10.10 and 10.04.
Wifi works fine out of the box. However if the other vaio tt in our office (running windows 7) comes online, my laptop stops being able to make new connections. It WILL stay connected to chat servers, and downloads SOMETIMES continue to work. However all new HTTP requests / ssh connections / rdp connections / pings fail. The laptop still appears to be "connected" to the wifi network.
This may also happen after an undetermined amount of time without the extra vaio. It is not solved by reconnecting or rebooting. Once the extra vaio leaves the building, everything works fine again. This problem does not happen at all if I boot into windows.
I have Ubuntu 10.10 on a thinkpad X201. Wireless was working, but has stopped. It still works in windows, so it is not a hardware problem. iwlist wlan0 scan sees the available networks, but I cannot associate with any of them, including my own.
Last night was my first attempt to connect to a secured network, and nm-applet failed to make the connection even after entering the WEP encryption key and SSID. By turning networking off in nm-applet I was able to manually bring up the connection by editing /etc/network/interfaces and using ifup wlan0. (nm-applet seemed to be interfering as long as networking was turned on there.) Wireless was working perfectly until I rebooted. Now I can't get it to work at all. (There were some partially completed security updates which completed when I rebooted. I hope this wasn't the cause of the breakdown.)I notice that wpa_supplicant is always running. I tried killing it in case it might be interfering with the connection process, but something keeps restarting it.
I have installed Fedora 12 on my laptop and subsequently spent most of the day trying to get the wireless connection to work. Looks like I am not alone with Wireless issues Through searching and reading today I think the problem lies with the fact that the wireless on/off switch is not working. Under Windows, when I press the wifi toggle switch it starts flashing orange. I haven't managed to get it to do anything under Fedora.
# lspci | grep Wireless
06:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
# iwconfig
[code]....
Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) is not working on centos5.3
# uname -r
2.6.18-128.1.16.el5
# lspci | grep Wireless
0b:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
[Code]....
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View RelatedI've installed 10.04 on a Dell 1200 laptop and cannot get the wireless card working. I've tried getting Ndiswrapper but it doesn't appear to be available on 10.04, and since I don't have an Internet connection, I can't download it. The card is a Broadcom Corp BCM4306 802.11 b/g. How do I get the card connecting to my Linsksys?
View 7 Replies View RelatedI have been trying to get my Trendnet TEW-649UB wireless card to work on Karmic. I have ndiswrapper "installed", but it doesn't seem to be working. I have reinstalled ndiswrapper-utils 1.9 and ndiswrapper-common from synaptic, but not ndisgtk (the GUI for ndiswrapper). When I try to see if any drivers are installed using terminal (ndiswrapper -i) the terminal freezes on me.
Previously I tried using the help doc for installing Trendnet wireless drivers, but I was met with no success. After my first try using the help doc it seemed that ndiswrapper was working correctly and the driver was installed, but when I tried to connect to my network my wireless was listed as "device not managed". If this helps at all the current state of my /etc/network/interfaces is: auto lo iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
When I run iwconfig I get:
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.
but when I try to install the driver using ndiswrapper -i I get the message: driver net8192su is already installed Right now my computer is not even reading that the wireless card is avaliable. When I left click on the network icon I can only see that I am on a wired network {ifupdown (wlan0)}. My computer is dual booted with Vista and the card works there, but for some reason I am having trouble with Ubuntu.
I've just installed Ubuntu (Koala) on an old (but worthy) Toshiba laptop. It's got a Sitecom WL-140 wireless card. (BTW I'm new to Ubuntu, but an old hand at Solaris). Can't get the card to work, although I think It's nearly there. nm-tool shows driver is p54pci. The activity light shows an orange light occasionally. State is disconnected. I'm not really sure whether I should be using the supplied driver (p54pci) or the Windows driver for this card and ndiswrapper. I've installed the Windows driver with ndiswrapper thinking this may fix it but no.
ndiswrapper -l says wlancig: driver installed and device (1260:3886) present.
I have a D-Link Air DWL-520 wireless card on my desktop computer. It runs well with Windows, but doesn't seem to work with Ubuntu. I am using Lucid Beta 2. I have tried googling, but have not come across any clear solutions on how to make it work.
View 1 Replies View RelatedAfter upgrading to the latest Ubuntu, my wireless card stopped working. I keep on pressing the button but the little orange light wont come on...I have an aspire 5517 with "Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)" I have tried drpjkurian's tutorial for madwifi with no success . (http://ubuntuforums.org/showthread.php?t=1309072
View 2 Replies View RelatedI have a Compaq AMD64 that has ubuntu 9.04 on one HD that works great. I've installed 10.04 on a separate HD and had problems installing it. I have 10.04 running now but I can't get my wireless card to work. During installation I skipped setting up the wireless network. Now when I boot into the 10.04 partition I cannot get the nm-applet to work. I can't get it onto the task bar and I don't see it anywhere else.
I checked to see what drivers are installed, and since I have no connection with that OS I can't update or DL drivers for it. I'm pretty sure that it is because I skipped setting it up during installation. What do I need to do to get the wireless working now? I checked other threads and none seem to pertain to my situation. Since I have to log into the 9.04 partition, I can't copy/paste outputs very easily.
I have a Broadcom BCM4311 wireless card on my Dell D620 laptop.
Code:
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
My wireless works perfectly with my university networks. But I have problem connecting to my house router. The first time I installed Ubuntu 10.10, it connected to internet and worked well. After a restart needed by nVidia driver, my house wireless stopped working while my university wireless still works. I have tried reinstalling the driver using System/Administration/Additional Drivers and manually
Code:
sudo apt-get update
sudo apt-get --reinstall install bcmwl-kernel-source
I need some help getting my wireless card working.I have a ASUS PCE-N13 and I'm running ubuntu 10.10 AMD64.I have confirmed that the card works running under win xp.The problem I have is that it can't see any available networks.I have downloaded and compile the latest driver from ASUS rt2860sta 2.1.0.0 and added these lines to the blacklist file.
blacklist rt2800pci
blacklist rt2800usb
blacklist rt2x00lib[code]...........
Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.
View 1 Replies View Related