Ubuntu Networking :: Setting Time Delay For IPTables (Incoming / Outgoing Port)
Mar 9, 2010
I've got a box with 2 interfaces, with IP1 = 192.168.100.1 and IP2 = 10.1.1.1 respectively on them. I've got an iptables rule that looks like:
Code:
iptables -t nat -A POSTROUTING -s 192.168.100.0/24 -d 10.0.0.0/8 -p udp -j SNAT --to-source 10.1.1.1 --random
If I get 2 consecutive packets from the same address and port from 192.168.100.0/24, they get SNAT-ed and come out of the same port on 10.1.1.1. If then I get another packet from the same address and port 10 minutes later, then it gets SNAT-ed, but comes out of a different port on 10.1.1.1. My question is: how can I set the time delay I would like iptables to remember its incoming address/port to outgoing port mappings?
I've got a box with 2 interfaces, with IP1 = 192.168.100.1 and IP2 = 10.1.1.1 respectively on them. I've got an iptables rule that looks like: Code: iptables -t nat -A POSTROUTING -s 192.168.100.0/24 -d 10.0.0.0/8 -p udp -j SNAT --to-source 10.1.1.1 --random
If I get 2 consecutive packets from the same address and port from 192.168.100.0/24, they get SNAT-ed and come out of the same port on 10.1.1.1. If then I get another packet from the same address and port 10 minutes later, then it gets SNAT-ed, but comes out of a different port on 10.1.1.1. How can I set the time delay I would like iptables to remember its incoming address/port to outgoing port mappings?
I need to know what the Iptables "code" is to change the outgoing/Incoming IP for port 53 (DNS). I'm running CentOS on a dedicated server. I very familiar with Putty and SSH. So I don't need much details, I just can't figure this out. I asked my server providor but they deleted my ticket and didn't answer me.I tried this but am not sure if this correct of working?
I am still new to ubuntu and I use firestarter as my firewall tool and I was told that its just ufw in a gui. Well anyways I noticed a connection to 174.129.241.144 using https and python, I didn't have any scripts running and my browser was closed, I read the man files for ufw and it said to do something like deny from 174.129.0.0/12 and I want to block all incoming and outgoing connections to this IP range and I was wondering how to do that, I heard of iptables that it would be able to do this but I dont know anything about it. What I should learn so I can handle these kinds of situation in the future and how I can block this ip subnet or also what does the /8, /12, and /16 stand for?
OS : CentOS 5.3 64bit How to trace incoming and outgoing network traffic for a give user? User 'A' logs in to the system and does various network connectivity As root user need to find what are the outgoing and incoming connection that are related with user 'A'. basically need to check the connection flow. netstat will show ESTABLISHED, LISTEN etc.. need something like tcpdump
Eg:- --user option for tcpdump tcpdump -vv -nn -i eth0 host 10.200.2.1 and tcp dst port 8080 --user A Can someone tell me any tool which can do such thing? Even if it can show the process ID of the client application which is trying to establish network connectivity will do.
Unsure about IP tables lingo, so excuse me for not looking this up:I have a server, running IP tables, that I do not want to allow any type of outgoing traffic to 192.168.1.21
I've been trying to redirect all outgoing packets (destined for a specified ip address) from my slack box back to itself. I thought this could be done with iptables, but if I fire up wireshark I can clearly see that the packets are getting out to the real server and I'm getting responses from it.
So here's what I tried:
All looks good and fine, and then I even try to visit 194.28.157.42 with firefox (by the way I am running a webserver, that is set to show a page when you visit 127.0.0.1) and I get an error page that reads: 502 Bad Gateway.
I ignored this message to see what the program I'm trying to interrupt does, and when I start wireshark and then start the program that is using that website, I can clearly see that the packets make it to the real 194.28.157.42 and get back responses.
it�s been several years since i played with iptables. I have setup like this:eth0 is the only physical device on box and eth0:0 is aliased. Traffic going out of the box to internet uses eth0eth0 116.55.58.1eth0:0 116.55.58.2I have a service listening on port 80 on 116.55.58.2Lets say my client connect to 116.55.58.2:80 through 116.55.58.1 , how do I force (mangle you name it) with iptables that the outgoing source address will be always 116.55.58.2?
Im running a web server on port80, but i want traffic coming from ip 212.333.111.222 on port 80 to be fowarded to port 9020 on the same server that my web server is rinning at that is my sshd port
I have a iptable as firewall, I want to open incoming of port 8080 so I use "# Allow forwarding of incoming Port 8080 traffic" but it didn't work? how can I open just incoming of port 8080?
How could we bcc all outgoing / incoming email through my Sendmail (8.14) Server? I tried this /etc/procmailrc :0c ! backupmail@domain.com But this get looped and backupmail received multiple emails of each for domain.com while sending locally from one user to another user.
My Ubuntu Box has 3 interfaces. eth0 (Internal 192.168.1.0/24)eth1 (External ISP DHCP)eth2 (External ISP Static IP)I need the outgoing traffic to internet for 1 of the internal pc (192.168.1.10) to only go only go through eth2
My question is simple - is there any linux app or applet which is able to show (monitor) incoming and outgoing connections assuming it's a direct internet access? I was using a firewall on a system off Redmont which was able to show every connection, listening ports of services if some were opened etc.
I just started using Skype and I am having a problem with the incoming/outgoing audio dropping out. The videoconference will start normal the connection being perfect. The guys on the other end can see me perfectly and can hear me loud and clear for the first say...10-20 secs but afterwards the outgoing audio from my part is dropping off and they can not hear me anymore. They can still see me. I can still be seen on the other end and typing and the share screen works perfect from my part or from their part but they can not hear me anymore..
Or there are days when it goes the other way round. The incoming sound would be dropping out. I can still be seen and heard on the other end and typing and the share screen works prefect but I am not able to hear them. I am using Slackware 13.1 on a XFCE desktop installed from the official DVD downloaded from the official site and the sound works perfect. I have no problem watching videos and hearing the sound in ..... or any other audio-video streaming sites.
I'm using a Debian servers, as router/firwall.. I've two ethernet interfaces into the server, one for wan and one for lan. The i use SNAT so my LAN clients can access the internet throgh the debian router. That is working... Now i want to be able to access servers on the LAN site from the WAN site, and i wanna use port address translation (PAT). I have a FTP server running on a lan server, so i'm trying to portward port 21.
When people try to access my FTP from the WAN site, they are redirected to the local FTP server, and they are promted for crendentials, but when the credentials are typed, and the local ftp server should answer the wan request, the connections dies.
The wan clients are being promted for credentials, so they are redirected to the local lan server, but after that the connections dies, so i think there is some kind of nat problem, when the local lan server is trying to respond to the wan request..
I have a vps server running certain services which can be accessed via a web browser (e.g webmin control panel), but I have recently been unable to access these services from my home machine using Firefox 5.0, running ubuntu 11.04.
Example:
I can access the server on port 80 fine, eg: [URL]
However I cannot access my webmin control panel on: [URL]
The pages takes ages to load and then times out. Same with transmission-daemon on: [URL]
Everything is set up fine on my server, the ports are open in firewall etc. and I can access these pages fine from my work computer.
This has only started happening in the last day or two and had been working fine up till then. I have not messed around at all with the firewall on my home machine. I have tried other browsers besides Firefox with same result.
I have a mail server on which I would like to block port 25 on my eth0 for everyone except our external spam filter. the problem is that I want our users to be able to connect via port 10025 which is forwarded to port 25, which then is blocked...
I'm not that great with mailservers, and just been thrown a curveball with a MS Exchange environment for which there is apparently no solution... yeah, right. But is there a workaround?
The problem is that the site mail (SMTP) needs to be sent via port 26 instead of the commonly used 25. Port 25 is mapped to a mailfilter, which apparently causes havoc with some of the mail, and the techs that have been on site trying to coax the Exchange server to co-operate have said that the only way would be to get rid of the filter.
The problem is that there are number of apps that are unable to have the outgoing port changed and so keep sending mail out on port 25.
I look after the Unix/Linux side of things at work, and I was wondering if there was an easy way to set up a Ubuntu box to receive mail on port 25 and just forward it to the MS box on port 26? So, in other words (and I hope this makes sense): monitor port 25, and forward whatever comes in on port 25 to the server on port 26. Simple portforwarding, or is it? What steps do I need to take?
As a part of migration I am proposing different scenarios to my organization. One which is asked to prepare is to configure multiple mail servers to handle incoming and outgoing mails. Say I have -[URL], I need to have accept mails from [URL] and send mail from [URL].
I want to block all outgoing traffic with iptables and only allow a few specific websites. I would like to get the code to do so and also to revert the changes in case I want to unblock them.
iptables -A INPUT -p udp --dport -j ACCEPT iptables -A INPUT -p tcp --dport -j ACCEPT iptables -A FORWARD -p udp --dport -j ACCEPT iptables -A FORWARD -p tcp --dport -j ACCEPT
and the rules are placed in iptables, i can see them when I do iptables -L. But when I do netstat -an | grep 161 I can see that port 161 (SNMP) is not listening. Why?
Rather new to Ubuntu. I was wondering for advice on a basic iptables configuration blocking all incoming/forward and just allowing outgoing to http(s) and dns of course.
I am running a voip server on port 5060. I want to hide this to all the robots scanning the net permanently - I know this is not enough security - it is just to prevent them from wasting by bandwidth testing all usernames until fail2ban stops them !
I'd like to have port 5060 accepting requests only from 'trusted' hosts, while others (client with dynamic ip) use port 5065 - thus, port 5060 will only appear open for some trusted partners and the bots will skip to something else.
I have setup the iptables rules succesfully to accept only trusted hosts.
-A RH-Firewall-1-INPUT -s 93.x.y.z -p udp -m state --state NEW -m udp --dport 5060 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m state --state NEW -m udp --dport 5060 -j DROP
I've added a PREROUTING NAT rule that change the port from 5065 to 5060 for others - but then, this gets caught in the INPUT rule as port 5060 -A PREROUTING -p udp -m udp --dport 5065 -j DNAT --to-destination 192.168.1.1:5060
This works so well that the packets coming on port 5065 are translated to port 5060 and get caught in the DROP rule...
I have a CentOS box which is Internet Facing. It has 3 LAN's connected to it which are for virtual machines.
I want to port forward port 445 to a machine on one of the LAN interfaces. I have tried various ways to get it done, but still cannot access that port from the interface. I definately know device hosting port 445 is live, as I can ping it from the CentOS box and use lynx to access it! (It's a web server)
I've been Googling about port forwarding iptables and even though there's result and I've applied it in my script, I can't make iptables forwading request to another machine so I decided to ask help.
eth0 is my Internet Interface (1.2.3.4 is the public ip) eth1 is my Lan Interface eth2 is my DMZ Interface
