Ubuntu Networking :: Script Which Checks If User Is Connected Via VNC ?
May 4, 2010My Lucid-PC runs x11vnc (port 5900) I would like to check with a script, if a user is currently connected to my Lucid-PC via VNC...
View 5 RepliesMy Lucid-PC runs x11vnc (port 5900) I would like to check with a script, if a user is currently connected to my Lucid-PC via VNC...
View 5 RepliesI have been routing network traffic based on MAC addresses, so we can distribute traffic evenly over a series of WAN IP addresses.Everything seems to be going well, but I have a very curious problem. One of the users can connect to the network without problem, but I don't see him in my network administration application (neither his MAC address or leased IP address).At the same time, I'm trying to identify other unknown computers on my network based on MAC addresses I don't have on file.
View 4 Replies View RelatedDoes anyone know of an application that continually scans for devices on a network and notifies you if a device connects/disconnects to/from the network? I just want a way of knowing when a computer is connected and when it's not.
View 10 Replies View RelatedThere are two host agent process ( hprsmha -WD and RSMHA ) running on my SLES 10 server suddenly hangs which is critical for my daily scheduled backup jobs.I want to create a script which checks for the 2 process and restart it automatically.so i can put it to daily cron job.My knowledge with scripting is so poor. Following are the commands i am running manually to stop and start the process.
cd /etc/init.d
./hprmsha stop
./hprsmha_wd stop
./hprsmha_wd start
./hprsmha start
I want the last login information whenever I log in through FTP.
This is possible for normal console and SSH logins by configuring in /etc/login.defs file. But I am not able to view the last login information when FTP is used.
I am connected to a network via SHH. Now, i know how i can see which users are logged on as well, but how can i see how many times each user has connected? this refering to users that have logged on at least once
View 7 Replies View RelatedI manage to get my mobile broadband working (connected, I mean) in both root & user account. However, my web browser, IM etc only work in root account.In user, knetworkmanager does show that my Huawei E160G is working fine, connected but I still can't surf the net & chat. I've included the dialout & uucp group for user account but that still doesn't resolve the problem
View 9 Replies View RelatedI'm using a linux server where nat server is running. Local user are connected from this server. So is there in tool that i can check that local user getting internet? or how can i check that a user connected from linux server using internet or where he visited?
View 1 Replies View RelatedI have a wireless network that my PC connects to just fine. I did have to change my address to 10.10.10.1 (Cisco router)
How can I do that with Ubuntu?
I will need very specific directions, because I don't normally use Ubuntu.
WiFi on this laptop worked fine for a few months then went out; after a reinstall of ubuntu (since 9.xx had come out since then anyway) the wireless still refused to even see networks, let alone connect to them; under Wireless Networks in the NM, I just see a greyed out 'disconnected'. This got me to thinking that it may have just been a hardware issue, but I find that hard to believe. Anyway, here's the pertinent information:
Started off with an lshw command just to see if a network adapter is even listed as being connected: `lshw`
Code:
id:
network:1
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection[code]....
As an addendum : I found this driver project but they claim to require a 2.6.8+ kernel; a quick `uname -r` shows that mine is 2.6.31, and an `apt-cache search linux-image` reveals that to be the highest available from repos; do Debian/Ubuntu distros not use more recent kernels or is this an Ubuntu-specific kernel naming scheme? If so, to what would it be comparable? I'm hesitant to try to install this and change my firmware if it's likely I'll be borking something.
i m trying to get online using prolink phs 100 modem i have been reading forums and tried to configure my system but i cant install USB_MODESWITCH coz its a bz2 file.... i tried downloading .rpm file and tried to convert using alien..i was prompted i didnt had alien..
i downloaded alein .deb file and tried to install i was propmted dependency not satisfied... debhelper(>=3) i downloaded debhelper . deb file and tried installing i was again prompted dependency not satisfied... dpkg-dev(>=1.14.19) i need to get connect ubuntu...
i'm connected to my 2wire 2701hg-b, but have no internet. when i plug in directly there's no prob, but wireless is a no-go.
View 1 Replies View RelatedThis is my second day with ubuntu on a dell mini 10v with broadcom wireless card. I hooked up to a wired connection and ubuntu installed the drivers for the broadcom card.When I put the cursor over the wireless icon on the desktop it shows the name of my wireless connection,active,and my ip address but when I open firefox I get a "server not found". I'm confused as what to put in the boxes for ssid,mode,bssid,mac address,and mtu under network connections. I've tried pretty much every conceivable method at my disposal,even went on my d-link router settings and nothing has worked.I do not have windows installed,using 10.4
View 1 Replies View RelatedAfter being a windows *** all my life I've finally taken the decision to start using Linux for real.
So I bought a entire new laptop for the task and it landed on a Acer eMachine 350.
Trouble here trouble there I finally came down to a ubuntu netbook edition, the latest one for the moment.
I had to use jockey-gtk to install drivers to my broadcom network card which took a while, but it now says I have a driver!
Trouble is, when I connect to my WLAN at home it says connected to Gustafsson(Network name) but my interface eth1 looks like this:
Code:
eth0 Link encap:Ethernet HWaddr 88:ae:1d:5f:e8:b4
inet addr:192.168.1.19 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::8aae:1dff:fe5f:e8b4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
code....
I'm having a problem with my computer connecting to a speficic wifi. The problem seems to be between my computer and this wifi, because I can connect to other networks and other computers can connect to this wifi. I do manage to get a connection, but I can't ping any website, I always get an unknown host error.I have managed to connect to this network only once: it wasn't pinging and then it eventually started working, but I don't recall doing anything that made it work.
[Code]...
I am running a dual-boot with Ubuntu 10.10 and Windows 7 and I can't stay connected to the internet with Ubuntu, but Windows does. My router is a D-Link GamerLounge DGL-4500. I have wireless internet access for about 10 seconds but then it drops. Access to the router doesn't go away though. Other computers can connect to it just fine, and my computer (Toshiba Satellite A505) has connected to every other one I've tried on. I can still log in to it and change settings and all that, but I can't access the internet through it. I also can't ping the router.
View 1 Replies View RelatedI can connect to my router but no web pages will load etc... I can connect my phone to the router and USB tether it to my laptop and everything works fine. I can also connect to my neighbors router and everything works fine.
I have tried put my routers IP in /etc/resolve.conf but to no avail. I also tried putting 8.8.8.8.
Edit: Toshiba Sattelite A215 laptop (RS690 wireless card?) and a Linksys router.
Ever since my upgrade from 9.10 to 10.4, every time I reboot the system it does a full disk check. /var/log/boot.log tells me that fsck thinks that the file systems contain errors or that it wasn't cleanly unmounted. And yet, it doesn't seem to actually find errors, and a clean reboot starts another check (again with it thinking something is dirty). I dual-boot with Windows, and reboot from there with the same problem.Again, all of this is new with 10.4 and was not happening with 9.10.Is there a way to find out when/how/why the disks are not being unmounted cleanly?
View 4 Replies View RelatedNothing too major here but today I had a few programs open and was doing a bunch of things and suddenly the system froze.
I am on 10.04 LTS -
Are there checks that I can do to see if everything is ok?
I had to turn the power off and re-booted and everything is fine, or rather, seems to be 100% fine - but more out of curiosity Id like to see if there are some checks that I can do.
I think that ubuntu creates a log of activity if I am not mistaken?
I was just wondering why Ubuntu is always checking my discs for errors. This happens every few times i turn the computer off and back on. Maybe every 2 or 3 times. Is this just ubuntu checking the discs or something to worry about?
View 3 Replies View RelatedI have managed to get vpn set up on my Debian Sid (I think). I want to use a different server from my default.IBut I am not using the vpn server instead of my usual one. Is there a way to make this happen?
View 14 Replies View RelatedI just got a new power supply in my old desktop, and installed ubuntu on it. I've got three NICs in there (for a later project), and when I connect my cable modem to any one of the NICs, then little connection triangle-spinny-thing in the upper-right tries to connect. But it never gets all the way connected.
View 5 Replies View RelatedI just installed Ubuntu 9.10 in a dual boot Vista system (DELL INSPIRON 530). Everything was ok except the wireless network configuration. Afrer checking on the Internet I realized There was an issue with my network card (Broadcom BCM431. I first tried to install the drivers using Ndiswrapper with not succes. Finally, I was able to use the b43 driver by installing b43-fwcutter. Now the driver is shown and active in the Hardware Drivers Utilily. I am even connected to my Wireless Network. However, I cant load any website. I have checked the parameters in the network set up. I have even tried different options, like static or dinamic IP. But I cant load any website.
View 2 Replies View RelatedMy mom has ubuntu 8.04.2, and it does not stay connected on the wireless usb cards. I tried 2 different ones, 1 azio and 1 is something else. But both get connected, but they die out after awhile. I am at work typing this, so I will probably try to move my router up higher or something, but it is weird it cuts out like every 15-30 minutes, and it starts at like 4 bars.
She is running it out of a live DVD( I Know, you shouldnt use a DVD as your main OS) but she only needs the internet, and uses google docs to save stuff or a USB stick. Anyone know what might be the cause of this disturbance in the connection. It is a cable connection, and the main modem is in my room, and we got a netgear router( maybe the problem?). I tried the same exact system/live dvd environment at my work place and it held connection pretty good, but I believe it did disconnect a few times as well.
just installed Ubuntu Netbook remix on my acer aspire one, and come across a problem Ive never faced before. Im able to Connect to my router (and access it through the internal ip address) but as soon as i try access anything outside of my network there is nothing!
This i found odd as first i thought it might have just been my Routers problem, but seeing as all my other computers were connected to it with no problems (wired and wireless) I quickly traced the problem back to the laptop.
After this i decided to see if after a simple update would fix the problem. so i connected it up through the Ethernet port once again it connects to the router but no internet! I have tried everything in my knowledge, but with no success!
i put a fresh install of 9.10 onto my laptop, i got online set up my network, and can see my other computers. when i open firefox, it wont connect to any website, what should i do?
View 2 Replies View RelatedOften i have an active connection on the tree network with an internet dongle according networkmanager, but ping is not working and firefox and thunderbird also don't have a connection. Skype however is working at that time. (testcall to skype is working) My present solution is to disconnect and connect a couple of times again until i can ping a commonserver on the internet, and then everything is working normal. Many are stating networkmanager is buggy, is this a known bug and is it worked on or do i need to install another program. Has any of you an idea what could be going on and how to solve it, permanently. In the way it's automatically right when connecting.
My dongle is of type: Huawei E 1550 and often i have a normal connection.
Just wondering if there is a way to view all connected devices on my network?? Something similar to view network map in vista?? I know the places network but that only shows me my shares and I want to be able to see everything that is on there ie printers, routers, VOIP, other non-shared computers, etc...
View 3 Replies View RelatedI am relatively new to Ubuntu, and Linux, and I am having a problem with it that I was hoping to get fixed. Whenever I try to connect to my home wi-fi network, on Ubuntu 10.04 Lucid Lynx, it keeps disconnecting and reconnecting...which makes it really hard to download various things. It works just fine whenever I used "shudders" Windows Vista but whenever I try to use it on Ubuntu, it won't work properly. The router I bought, to replace my old, broken one, was Linux compatible, or at least that's what it was advertised as. The laptop is an HP G70 and the method I used to download Ubuntu was the Windows Installer.
View 1 Replies View RelatedI can connect my wlan card to router (gateway) ,but I can't go to internet, pinging my router (and everything else) also falied. Same problem was with knoppix but with help of others i solved it modifing etc/reslove.conf IP address to my gateway (nameserver). At ubuntu resolve.conf seems ok, as there is already IP address of my gateway?
View 6 Replies View Related