Just wondering if there is a way to view all connected devices on my network?? Something similar to view network map in vista?? I know the places network but that only shows me my shares and I want to be able to see everything that is on there ie printers, routers, VOIP, other non-shared computers, etc...
View 3 RepliesTo use my home broadband, I am connected to a wireless router. How can I scan for other devices connected to that router? I am using Ubuntu 10.10.Is there both a GUI and CLI method?The IP of my router is URL... Please rename this thread title from 'How can I scan for other devices connected to that router?' to 'How can I scan for other devices connected to my router?
View 4 Replies View RelatedIs there away to view wireless access points without being connected. I am having trouble getting connected to my wireless DSL modem. I have no problems connecting with Windows Vista. Just can not get Ubuntu 9.10 to connect. iwconfig says no associated with access point. I can connect with ethernet cable.
View 3 Replies View RelatedThis may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies View RelatedI have Virtualbox installed from the Ubuntu repository. As I just found out, I can't access any USB connected devices (printer, scanner). It seems I can get these USB peripherals to work by using a different Virtualbox repository. how to do this without loosing the OS installation that I have already setup in Virtualbox?
View 6 Replies View RelatedI am running 9.10 latest updates (as far as I know) My problem is with my usb connections.I cant connect different usb devices to the same usb ports if a device had been previously connected to it. IE: I have to keep my camera connected to one particular port. If I disconnect it and connect anything to it, it cant be seen. It doesnt matter if I reboot. Is there a way to clear out any memory that stores the usb port assignments?
View 1 Replies View RelatedHad this strange issue ....
Steps
a. Working Gnome desktop with NVidia proprietary drivers in Jessie.
b. Something happened (see below)
c. Still working Gnome desktop with NVidia proprietary drivers in Jessie.
d. Reboot
e. Boot up in low res -can see the terminal messages but no X/ Gnome Desktop
f. CtrlAlt-F1 takes to terminal login
g. Log in, looked at dmesg, syslog shows no errors but looking at Xorg.[0-5].log shows:
Code: Select all[Â Â Â 7.942] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[Â Â Â 7.943] (II) NVIDIA(0): NVIDIA GPU GeForce GT 240 (GT215) at PCI:1:0:0 (GPU-0)
[Â Â Â 7.943] (--) NVIDIA(0): Memory: 1048576 kBytes
[Â Â Â 7.943] (--) NVIDIA(0): VideoBIOS: 70.15.27.00.00
[Â Â Â 7.943] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[Â Â Â 7.945] (--) NVIDIA(0): Valid display device(s) on GeForce GT 240 at PCI:1:0:0
[Code] ...
After looking at this post [URL] .... poked around at the back of the monitor and found the DVI cable loose. Plugged it in tight and rebooted and Gnome desktop came up as good as ever.
Step b. , as it turns out, was someone had adjusted the monitor height resulting in the DVI cable coming loose but not getting pulled out entirely.
I am connected to a network via SHH. Now, i know how i can see which users are logged on as well, but how can i see how many times each user has connected? this refering to users that have logged on at least once
View 7 Replies View RelatedWe have a webcam that is connected to a tv tuner card via the rca input on the tuner card. I want to set that up so that i can view it remotely over the internet. I've seen you can use vlc to do this, but the problem is that I don't want to have the webcam's computer recording and streaming all the time. I want it to only do that when i want to view it from my remote computer. We don't view the camera at a regular time, so a set schedule wouldn't work.
I hope this all makes sense. Is this possible, and if so, what is recommended for getting this done.I'm hoping i can somehow control this with a remote control and we'd see it on our tv monitor (that'd make it easy for the non-computer people here), so if it could be done in a script that would be great cause i can have the remote run the script.
I am running Lenny. USB storage devices are painfully slow, if the data to be copied is above 4GB it works on transferring for more than half an hour and then comes up with an error dialog(saying something like file size is too big). The problem exists in both read and write.
I did google a bit and here is the output of lsmod | grep hci
ehci_hcd28428 0
uhci_hcd18672 0
usbcore118192 4 usb_storage,ehci_hcd,uhci_hcd
[Code].....
When I connect my Debian PC to my WiFi router my PC doesn't get internet if other devices are connected to it .
When i disconnect those devices and connect my Debian PC only then my PC connects to internet but other devices connected to it later do not get inernet connection.
When I connect my Debian PC using LAN Cable to the same router all devices work fine.
I was wondering if there's any way for a laptop to be both simultaneously connected to a wireless network, while at the same time acting as an ad-hoc network with local access to serve as a wifi connection for my mobile device, which would be ssh-ing into the laptop and using local resources.
View 1 Replies View RelatedI have been working in macromedia dreamviewer for editing html and php files, Just now I moved to linux system by installing xampp , my question is that I need a best html and php editor that supports both the design view and code view as like in dreamviewer.
View 7 Replies View RelatedI'm looking for some help on how to troubleshoot the network on Ubuntu 10.04 64 Desktop. It's on a Acer Aspire 721. There's a wireless card but the widget in the top right says there is no network device.
View 2 Replies View RelatedJust built a box and once 10.04.2 64 bit was all installed and loaded up I realized instead of showing my Ethernet as connected it had the ol x. So when I clicked on it I got "No network devices available." The mainboard is an Asrock 890GX Pro3, link light completely out.
View 1 Replies View RelatedI have a wireless network that my PC connects to just fine. I did have to change my address to 10.10.10.1 (Cisco router)
How can I do that with Ubuntu?
I will need very specific directions, because I don't normally use Ubuntu.
In my home network, My Ubuntu 10.04 LTS (fully up to date) is having trouble being able to ping other computers by their computer names instead of by their IP#s. I've checked over the settings of the router (D-Link that provides wired and wireless connectivity, DNS, Gateway, etc.) and I'm pretty sure it is set correctly. My Ubuntu system is a dual-boot (Ubuntu and XP), the other computers are all XP except for one which is running Windows 2000 Pro. All the other computers are able to ping each other by name, and can ping this one by name when it's in XP or when it's in Ubuntu.
But this computer (when in Ubuntu) cannot seem to ping the other computers by name. Some it can be pinged by name from the Ubuntu system if I include the .local to the name, but others do not. I have checked and compared the network settings on each of the computers to make sure they were set identically (only the computer name is different). All of the XP systems are DHCP configured, The Win2000 is set static and is also reserved at the router. NONE of them have any of the computers listed in a hosts file. I want to avoid editing hosts files if I can.
There are seven computers in all. Only the Ubuntu has difficulty pinging other computers by name. What should I check? What can I set? I would like to know what it is that I'm missing.
I'm trying to set my network interfaces so that they don't get random every boot.(eg assign eth0 to a network interface with a given MAC addr, and eth1 to the other one)I trew in a udev rule (in fact just modified the rules that was automatically generated and set the ethX in it) but the system ignores my udev rule.What am I missing ?Here is all the info :
Code:
$cat /etc/udev/rules.d/70-persistent-net.rules
# This file maintains persistent names for network interfaces.
[code]....
WiFi on this laptop worked fine for a few months then went out; after a reinstall of ubuntu (since 9.xx had come out since then anyway) the wireless still refused to even see networks, let alone connect to them; under Wireless Networks in the NM, I just see a greyed out 'disconnected'. This got me to thinking that it may have just been a hardware issue, but I find that hard to believe. Anyway, here's the pertinent information:
Started off with an lshw command just to see if a network adapter is even listed as being connected: `lshw`
Code:
id:
network:1
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection[code]....
As an addendum : I found this driver project but they claim to require a 2.6.8+ kernel; a quick `uname -r` shows that mine is 2.6.31, and an `apt-cache search linux-image` reveals that to be the highest available from repos; do Debian/Ubuntu distros not use more recent kernels or is this an Ubuntu-specific kernel naming scheme? If so, to what would it be comparable? I'm hesitant to try to install this and change my firmware if it's likely I'll be borking something.
i m trying to get online using prolink phs 100 modem i have been reading forums and tried to configure my system but i cant install USB_MODESWITCH coz its a bz2 file.... i tried downloading .rpm file and tried to convert using alien..i was prompted i didnt had alien..
i downloaded alein .deb file and tried to install i was propmted dependency not satisfied... debhelper(>=3) i downloaded debhelper . deb file and tried installing i was again prompted dependency not satisfied... dpkg-dev(>=1.14.19) i need to get connect ubuntu...
i'm connected to my 2wire 2701hg-b, but have no internet. when i plug in directly there's no prob, but wireless is a no-go.
View 1 Replies View RelatedThis is my second day with ubuntu on a dell mini 10v with broadcom wireless card. I hooked up to a wired connection and ubuntu installed the drivers for the broadcom card.When I put the cursor over the wireless icon on the desktop it shows the name of my wireless connection,active,and my ip address but when I open firefox I get a "server not found". I'm confused as what to put in the boxes for ssid,mode,bssid,mac address,and mtu under network connections. I've tried pretty much every conceivable method at my disposal,even went on my d-link router settings and nothing has worked.I do not have windows installed,using 10.4
View 1 Replies View RelatedAfter being a windows *** all my life I've finally taken the decision to start using Linux for real.
So I bought a entire new laptop for the task and it landed on a Acer eMachine 350.
Trouble here trouble there I finally came down to a ubuntu netbook edition, the latest one for the moment.
I had to use jockey-gtk to install drivers to my broadcom network card which took a while, but it now says I have a driver!
Trouble is, when I connect to my WLAN at home it says connected to Gustafsson(Network name) but my interface eth1 looks like this:
Code:
eth0 Link encap:Ethernet HWaddr 88:ae:1d:5f:e8:b4
inet addr:192.168.1.19 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::8aae:1dff:fe5f:e8b4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
code....
I'm having a problem with my computer connecting to a speficic wifi. The problem seems to be between my computer and this wifi, because I can connect to other networks and other computers can connect to this wifi. I do manage to get a connection, but I can't ping any website, I always get an unknown host error.I have managed to connect to this network only once: it wasn't pinging and then it eventually started working, but I don't recall doing anything that made it work.
[Code]...
I am running a dual-boot with Ubuntu 10.10 and Windows 7 and I can't stay connected to the internet with Ubuntu, but Windows does. My router is a D-Link GamerLounge DGL-4500. I have wireless internet access for about 10 seconds but then it drops. Access to the router doesn't go away though. Other computers can connect to it just fine, and my computer (Toshiba Satellite A505) has connected to every other one I've tried on. I can still log in to it and change settings and all that, but I can't access the internet through it. I also can't ping the router.
View 1 Replies View RelatedI can connect to my router but no web pages will load etc... I can connect my phone to the router and USB tether it to my laptop and everything works fine. I can also connect to my neighbors router and everything works fine.
I have tried put my routers IP in /etc/resolve.conf but to no avail. I also tried putting 8.8.8.8.
Edit: Toshiba Sattelite A215 laptop (RS690 wireless card?) and a Linksys router.
I know pretty nothing about networking'n'stuff. I got this linksys wireless router that was somewhere in a box for a few years ... now I want to see whether I can bring it back to life. I know, that I put some different software on it and that it doesn't have it's original ip assigned any more. But I can't remember which ip that would be.
So for starters I just wanted to put the original software back on to see if that thing still works. But how to do that? First I got no clue how to determine the address it is listening to. Once that'd be figured out I guess I'd have to ssh to it and install this ____.bin file I downloaded somehow.
I have Ubuntu 9.10 on VirtualBox.How can i view my wireless networks via 2 ways ?
1)via Terminal(Shell)
2)via a suitable apps in GUI.
Does anyone know of an app that I can use to view all the computers connected to my network and the IP addresses to those computers?
View 8 Replies View RelatedI've got a co-worker who is trying to connect multiple devices to his wireless router - Xbox, Wii, TV, Dishnetwork box, etc. Not all of the devices are wireless however. He's had several thoughts on how to get this done and I know very little about this kind of thing so I thought I'd ask some of you.
His first thought was to buy a multi port bridge, but he doesn't like any of the ones he's seen so far.The other thought was to connect all of the devices to a switch and then use a single bridge, but he isn't sure if this would work.