Ubuntu Networking :: SSH / Telnet Connection To Desktop Within LAN Times Out
Dec 16, 2010
Wrong prefix, its Ubuntu not Lubuntu. Three devices:
Laptop 1:
---Can ssh to any device.
---Accepts any internal ssh.
Desktop 1:
---Can ssh to any device.
---Accepts any internal ssh.
Desktop 2:
---Can ssh to any device.
---Can ssh to itself through localhost or 192.168.1.130.
---Any ssh(and telnet) aimed at this device times out.
All three devices recently had openssh-server installed yet only one seems deviant. I've been trying to ssh into desktop 2 to no avail, yes the machine is reachable, yes sshd is running, yes ufw is disabled, and no there is no external firewall that I know of. Anything else I can try? The router for the LAN being dd-wrt.
View 1 Replies
ADVERTISEMENT
Aug 3, 2011
My desktop computer, running 11.04 (fresh install) sometimes can't establish a wired Ethernet connection. Sometimes when I boot, it keeps trying to establish, but with no luck. I keep trying to choose "Auto eth0" from the networking menu, but still, it doesn't succeed. If I reboot, it sometimes works. I can't establish a connection about half the times that I boot.
The computer is connected with a cable to a router ("Belkin Wireless Pre-N router"), and the router is connected with a cable to a cable modem.I've been using Ubuntu for a while, and I've had a problem for the past few versions (since around 10.04)? I thought that it might be some old issue that got resolved, so I did a fresh install of 11.04 today, and still have the same behaviorI'm willing to try things next time I can't get a connection, but don't know what.
View 1 Replies
View Related
Jul 8, 2011
I am facing an error when I run the following command telnet localhost 7777
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
View 2 Replies
View Related
Jan 12, 2010
I can telnet (while on the actual machine) using
Quote:
telnet localhost 25
When I try and use the local machine's ip
Quote:
telnet 192.168.100.9 25
I get
Quote:
Trying 192.168.100.9...
telnet: Unable to connect to remote host: Connection refused
[Code].....
This last one is strange as I the IP looks odd.
What I am doing wrong, and how do I fix it. After much surfing many mosts say that telnet is not used anymore but I want to use it to test my smtp server.
View 9 Replies
View Related
Jan 25, 2011
If I only want to let a user be able to login via telnet a max number of times equal to 2 how would I go about doing this?I have found this little tid bit:per_source = 2but that only allows 2 connections from the same source (i.e. network) and that would not work. For some reason our telnet sessions are not dying off after a user has shutdown their PC and then the next time they login it adds another telnet session.
1. user1 31300 /dev/pts/409
2. user1 27539 /dev/pts/539
3. user1 18042 /dev/pts/316
[code]....
View 4 Replies
View Related
Feb 20, 2010
I recently started attending University and there is a filesharing hub set up throughout the dorms. I want to connect to it using LinuxDC++ but the connection just continuously times out. I have used DC++ before on Windows and never had any troubles so I am thinking it is something to do with networking in Linux (I have only been using Ubuntu for about a month).
View 2 Replies
View Related
May 17, 2011
I had recently installed Ubuntu 11.04 (64-bit) and I have trouble loading websites. I use a DSL (PPPoE) connection from NetworkManager to connect to the internet. Some sites like this forum site, stack overflow, etc. do not load. Firefox 4 says 'loading...' and then finally times out. I can ping these sites though.
I tried 'wget stackoverflow.com' and Lynx both timed out. wget sends out a request and waits a long time for response before timing out. These sites load perfectly well on my Fedora 14 (64-bit) & Windows XP installations and both these OSes have Firefox 4. From this I assumed that this is not a problem with Firefox (or any other browser for that matter) but it has got something to do with the network configuration.
I faced the same problem with Ubuntu 10.04 too. I use a Dell Inspiron N5010.
View 6 Replies
View Related
Apr 2, 2009
I'm trying to setup a ssh connection from to my house that way I can learn Linux on a box that won't make my boss the sys admin (Im help desk) grind his teeth. He say that ssh port is allowing connections out of the firewall but not in so I can connect to my house. However If I try to connect to my box I get a message stating that the connection has time out. I have port forwarded the 22 to my box and have even changed the port to see if it is my isp blocking me. I am able to connect via SSH internally but when I try outside my house I am running into trouble. I looked up how to disable my fire wall and as far as I know it is.
View 3 Replies
View Related
Jun 12, 2011
I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.
Code:
telnet f.mx.mail.yahoo.com 25
Trying 98.137.54.237...
telnet: connect to address 98.137.54.237: Connection timed out
telnet: Unable to connect to remote host: Connection timed out
I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused
Code:
telnet 192.168.71.1 25
Trying 192.168.71.1...
telnet: connect to address 192.168.71.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
[code]....
View 4 Replies
View Related
Nov 10, 2010
When i am trying to telnet to a machine connected in our LAN ..
telnet: Unable to connect to remote host: Connection refused
What's the reason for this? how do i establish a connection? I am using ubuntu 10.04.
View 8 Replies
View Related
Jun 20, 2011
I have been having trouble with Ubuntu 11.04 when connecting to the Internet via Wireless Networking. It will connect, and has good speed once it connects, however it takes upward of 10 minutes and over 20 times of me clicking 'Connect'.
Is there a way to connect to a wireless network quicker? My network is unsecured and without a keyring. It is not only slow connecting to my network, but the network of other's.
lspci information:
View 2 Replies
View Related
Feb 18, 2010
I am trying to find the difference between the above two services. Both are under xinetd and can someone please explain the difference between them (is one more secure than the other one?)
View 1 Replies
View Related
Mar 25, 2011
EVERY SINGLE TIME when I try to close the Nautilus File Browser (ie when I go to my Documents folder), the desktop flashes all the icons on the desktop a couple of times (for a sec you would see no icons on the desktop) before everything goes back to normal.
View 9 Replies
View Related
Jan 4, 2011
I just installed 10.10 (2.6.35-24-generic) and my wired network connection is cutting out. I'm dual booting with Windows 7, and it works fine over there. I'm confident it's not a hardware issue. It works initially, but after a few minutes (this varies) the connection will drop out. If I'm on Firefox, I'll get "Loading" until the connection times out. If I'm using RDP to a local computer, I'll lose the connection. When it happens, if I ping a local computer, I'll get:
[Code]....
So I'm getting a bunch of packet loss. Some of the time, once the packets do start going through again, Firefox will finish loading the page. Other times, I have to click on network manager and click on "Auto eth0" which will give me the "connection established" message, and kick the network card back into gear. Sometimes I have to do this several times. It never shows as disconnected, but this somehow gets it going again.
[Code]...
View 1 Replies
View Related
Jun 9, 2010
I am using a PC to telnet into a Lucid Lynx Ubuntu system, and trying to record audio via a microphone which is connected to the Ubuntu system, and play it back on the PC. The microphone works when recording and playing directly on the Ubuntu system (so I know it's not hardware), but not when recording over the telnet connection. Playing other audio files does work over the telnet connection (so once again, I know it's not hardware), it's just the recording that doesn't work.
So basically it's just the audio-in over the telnet connection that Ubuntu isn't liking.
I tried removing PulseAudio (as I had a Fedora system that I had to do this with also, and that was the fix for that system), but apparently recording doesn't work at all in Ubuntu without it, as the microphone wouldn't work directly on the system anymore after in removed it. So I reinstalled it, but I am still stuck.
I cannot use any other programs to accomplish this - and I don't think I have to, I believe something is just messed up somewhere that is not allowing my microphone to pick up sound over the telnet connection, but I don't know what it is.
View 1 Replies
View Related
Mar 2, 2010
I have an application that uses a telnet console, and I have an autostart script to start it (and check that it is running).The problem is that if the program is not startet by root, or by using sudo, I cant get access to the telnet console, it just says "connection refused".The application works fine, but I cant acces its console, so I have to shut it down, and then restart it with sudo to be able to log in to it.Anyone know how to make the script start the application with enough rights?
View 1 Replies
View Related
May 23, 2011
I have CENTOS 5.4 Installed in one machine and i used Real IP provided by our ISP.My requirements for Mailserver are:
Dovecot
Postfix
everythings done but when i tried to telnet my External IP it giving me an error of telnet connection refused but i can able to ssh to my external IP and also i disabled the firewall but still no luck.
View 12 Replies
View Related
Apr 22, 2010
I have my router configured so that it drops outgoing telnet connections (and other protocols I don't use). It's a 2wire gateway. 192.168.1.65 is the internal IP of my ubuntu box.I'm trying to figure out what normal network traffic looks like and whether I should be worried by this log entry. At the time this happened I was testing out TOR (just navigating to a few sites (dell, ubuntu forums, etc.) nothing all that interesting.)
View 2 Replies
View Related
Jul 16, 2010
when i try a telnet to a host like that: telnet 10.10.10.10 1234 i got this: telnet: Unable to connect to remote host: Connection refused.
1/ does this mean that the problem is not due to a firewall, but that the host 10.10.10.10 doesn't listen on the port 1234? other way does this mean that my firewall is authorizing traffic on the port 1234?
and when i try a telnet on another port like that: telnet 10.10.10.10 1235 i get: Trying 10.10.10.10 ...
in this case this
2/ does this mean that the firewall is blocking the traffic between my host and the 10.10.10.10 on the port 1235?
View 1 Replies
View Related
Nov 8, 2010
Machine A is located behind client firewall. The machine runs telnetd. This is Linux machine with Python 2.5.4 installed. I do not know the IP addy of the router and firewall is not open incoming. outgoing firewall is open.
Machine B (Windows machine) is a server with well known IP address. I can install any programs I want on either machine.
The idea is that I want Machine A to open a socket to machine B. Then I want to hold that socket and use to run a telnet session from Machine B to Machine A telnetd server.
View 1 Replies
View Related
May 5, 2011
Is it possible to restrict telnet connection from remote to my server(linux -centos5)?
=================
Ex : [root@localhost]# telnet 10.0.0.33 80
Trying 10.0.0.33...
[code]...
View 2 Replies
View Related
Jul 21, 2010
I want to create script wherein it will check the application if its running. The command that I'll be using to check the application is telnet (if you can recommend others, that's ok). I've an application and it is listening to port 1808. If I do telnet localhost 1808, the response is :
Code:
[root@test ~]# telnet localhost 1808
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
What I want to happen is if the response is like to code above, it will execute a commands. Obviously, above code knows that the application is not working so I need to execute a commands. I created a script before using expect but I don't think it will work because I haven't establish a shell yet unlike successful telnet I could spawn expect.
View 5 Replies
View Related
Sep 24, 2011
Just setup my postfix and trying to telnet localhost.
here it is..
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connection closed by foreign host.
I wanna paste my /var/log/maillog but i don't know how, when i copy from putty screen it's only copied part of the log.
btw i found one similar problem here [URL] but the thread starter already lost the pastebin so i don't know how he resolved the problems.
View 2 Replies
View Related
Jan 24, 2011
When ever i run ssh -p <port> <user>@<remote IP>, i get a connection has timed out error. (i use the -p <port> part because i'm using a custom port). does anyone know what could be causing this? i know of a few *possible* problems, but i don't know how to test them all.
- I am on the same network as the server (I'm trying to test using remote IP to make sure it works before i go out an try it somewhere else)
-The router could be blocking it (i'm using linksys)
-IPtables may not be set up right (i think it is though. the only thing i've run is "sudo iptables -A INPUT -p tcp --dport ssh -j ACCEPT". I have changed the port for the server since then. maybe i have to restart it or something for it to recognise the change? I know very little about IPtables though).
-maybe i have to change something in my client or server config files? (the only config file i've changed is the sshd_config file on the seerver, and that was to change the port to my custom port).
thats all i can think of for now. It may be none of those. I do have the sshd_config and port forwarding in my router set to the same port, so thats good.
View 1 Replies
View Related
Feb 18, 2009
I am able to telnet to the server via a remote connection, but for some reason, it will not accept mail. ere is the bounce back email I am getting.Quote:This is the mail system at host smtp.mydomain.net.I'm sorry to have to inform you that your message could notbe delivered to one or more recipients. It's attached below.For further assistance, please send mail to postmaster.If you do so, please include this problem report. You candelete your own text from the attached returned message.The mail system
<root@mydomain.net>: temporary failure. Command output: pipe: fatal: pipe_command:
execvp /usr/bin/perlbin/vendor/spamc: No such file or directory
Reporting-MTA: dns; smtp.mydomain.net
[code]....
View 11 Replies
View Related
Jul 3, 2011
My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
View 1 Replies
View Related
Sep 11, 2009
I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
View 1 Replies
View Related
Dec 19, 2009
I'm using Fedora 12 with Apache 2.2.14, and I was having this error on 2.2.13 as well.
Even when I connect to my server over LAN, Firefox times out occasionally while connecting. I can't figure out what is causing this. The error_log isn't showing anything. I even cleaned the error_log file, so that if something happened, it'd be a little easier to spot. But I'm still getting time outs, and nothing in the error_log.
Here is my httpd.conf [URL]
It's the default Fedora configuration, I've only changed the ServerName if I remember correctly. it's not the Timeout setting, because on LAN it should never time out.
View 4 Replies
View Related
Sep 28, 2010
I'm running Ubuntu 10.04 which was upgrade from a 9.x install. I never had this problem on my 9.x install, but since the "upgrade" I experience my desktop freezing. I'm not exactly sure how to troubleshoot this.In looking at /var/log/messages the last entries I see before me having to a hard reboot are:
Code:
Sep 27 19:27:07 gingerk sudo: pam_sm_authenticate: username = [me]
Sep 27 19:27:07 gingerk sudo: pam_sm_authenticate: /home/me is already mounted
Sep 27 20:56:40 gingerk kernel: [102839.046817] operapluginwrap[26712]: segfault at 0 ip (null) sp bf9ce11c error 4 in
[code]....
View 1 Replies
View Related
May 20, 2010
Something is wrong with the networking on this Ubuntu system. It has been assigned the LAN ip address 10.1.10.10 From another Ubuntu desktop, I can: ssh myself@10.1.10.10 ( from 10.1.10.143 ) and I can login without any problems. I can ping 10.1.10.10 ( from 10.1.10.143 )
[code]...
View 1 Replies
View Related
