I hooked up router to tower and ever since I have not been able to get PeoplePC WebMail. I unplugged router and I still can't get the web mail. The customer support have stated web mail is down other reps say it is not. I get the internet. I have Ubuntu installed.
View 3 RepliesEmail my ASDL router IP for VPN connection.My adventure with NX nomachine continues with great success. Thanks for all you input and suggestions - I am still polishing the project but it has been straight forward to date.One questions I have is how to stay current with my ASDL router's IP. I use a Canadian provider with a dynamic IP that is constant for days at a time. Without powering my router down or any power outages, my IP will change. With that IP change, I am unable to login to my desktop.One windows style program I found does the job.It emails my current IP to a predefined email. I am unable to seem to find one for linux.
Ideally I would have a ubuntu program on my desktop (NX server) that would keep me up to date on my IP via email so I can login.Anyone have any experience with that? Or have any other suggestions on how to do this (I dont know the best way to keep that IP up to date besides requesting a static IP from my provider).
I have managed to compile and install the driver for my linksys AE1000 adapter. I can scan and see my network (and several others) but can't seem to connect. I have read a few threads looking for clues but I can't seem to figure it out. My kernel is 2.6.35-24-generic and I am using the latest rt3572 driver (v2.5.0.0). Here are a couple of steps that I have taken:
1) The usb driver does work properly and connect on a Windows machine.
2) Temporarily removed security from my router (uses WPA2). Still can't connect.
3) Tried compiling and installing the previous version of the driver (2.4.0.2)
Does anybody know what to do? Internet works fine except for that problem.
I can attach files of 33kb in web-based email service (Gmail) but no big ones.
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedHere is what I am wanting to do:Whenever a program is installed - send an email with the program name.
View 3 Replies View RelatedI want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
These r IP provided by my ISP that i've put on Fedora 8:
WAN IP:xxx.xxx.xxx.17 (eth0)
Subnet:255.255.255.252
Gateway:xxx.xxx.xxx.18
Valid static(public) IP set of 2:
IP:xxx.xxx.xxx.147 & 148 (eth1, eth2)
Subnet:255.255.255.240
i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.
I installed Postfix, Amavis-new + Spamassassin + Clamav, Dovecot, and SquirrelMail today, using the Ubuntu guides for each. I have 10.04 LTS Server. My PHP scripts can send email, but when I tried to log into Squirrelmail, I couldn't. Here is what my error log produced (the server name and user name have been changed) :
Code:
myserver dovecot: imap-login: Login: user=<username>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured
myserver dovecot: IMAP(username): opendir(/home/username/Maildir) failed: Permission
[code].....
I have a dedicated server which is running CentOS release 5.5
I'm still learning this as I go, but, frustrated at the amount of spam I was getting, I decided to install the Qmail scanner.
I followed the instructions here, all of which seemed to go well.
[url]
However, now when I try to send mail I am getting the following error:
The mail server responded: qq temporary problem (#4.3.0).
I'm new to fedora and also new to Linux too. I'm using lenovo SL410 which is not provisioned for serial port. Now I want to configure cisco router via serial-usb (Z-TEK) converter, for that I have installed minicom and still I'm not able to connect to router. Do I need to install driver for converter that I'm using?
View 2 Replies View RelatedI've moved a linuxbox from being my gateway (nat, etc) to behind a new gateway (a DD-wrt router). For transparency purposes, I'd like to continue using the old box services, and just have the gateway in front of it.
Here's what I did:
The newgateway is setup for class C, 192.168.0.0
This configuration works, but sometimes it doesn't and I haven't figured out why yet.
At sometimes, clients on the LAN get throughput rates with very little speed loss (using speakeasy speed test). They will run at 33M on the LAN, running through both the newgateway, and the oldbox, and get about 35M with directly connected to the cable modem.
Other times, it seems nothing can talk with anyone, and I am not sure why.
I know what I have done is a little unconventional, but it's a transitional thing, and I am not sure it is the cause of the problem, although it was the last things changed.
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies View RelatedI want to configure linux CentOS 5 as a router using iptable, .Im new in linux so I need the steps to do that
View 5 Replies View RelatedI moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
I am thinking of moving the router behind a server and connecting the server directly to the internet via a modem. Are there any security issues related to doing this? or other things I should be aware of. Iptables are implemented on the server blocking access on unused ports.
View 2 Replies View RelatedThis is my basic setup:
[URL]
I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?
How do I make a router by Linux?In other words you want your Linux to work as a router.
View 10 Replies View RelatedI use 'quoted' style for reply emails. I want to be able to intersperse my replies within a quoted reply i.e. if the email had three paragraphs, I'd like to be able to have my replies between each of the paragraphs. At the moment, I don't seem to be able to do anything other than delete from the quoted section - I try to simulate my requirements by cutting and then 'paste quotation', but this doesn't always work as sometimes Evolution adds too many levels of '> ' .
View 5 Replies View Relatedwe had a server with Hostway, and it was running ubuntu. The server also had Plesk installed, which did some funny things. We had several websites on that server, and many email addresses. Then we changed servers. Now we have a server through Rackspace and it is also running Ubuntu. It also has Virtualmin installed, which generally does not impose as many unconventional changes on Ubuntu as Plesk did.
Rather than using Thunderbird to download my email (which is what I used to do) I've decided I'll start reading my email on the server. So I will ssh to the server and then use some email client, such as Alpine, to read the email. So I installed Alpine. I have an email account for "lawrence". The email address is lawrence @ krubner. Currently, when mail arrives for that account, it is stored here:
/home/krubner/homes/lawrence/Maildir/new
and then it is transferred to hear:
/home/krubner/homes/lawrence/Maildir/cur
When I start Alpine, while logged in as lawrence, Alpine automatically sets up an inbox for me here:
/home/lawrence/mail/
How do I get Alpine (or any other client) to read from the correct folder? I'm fairly sure the email package (the MTA) at work on this new server is Postfix. As near as I can tell, my email is held for 24 hours in this folder:
/home/krubner/homes/lawrence/Maildir/new
and then it gets transferred here:
/home/krubner/homes/lawrence/Maildir/cur
Alpine only lets me set one path for my Inbox, so I'm not sure what path I should set. If I use "cur" I will see all email 1 day late, but if I use "new" then I will miss email if I go a day without checking.
I replaced my wired router and networking has gone south on one of my boxes. It's a Dell tower, a few years old, triple boot (ubuntu 8.10, FreeBSD, WindowsXP). Old router used 192.168.254.* via DHCP, new one is 192.168.2.* via DHCP. The router replacement caused no problems for either FreeBSD or WinXP on this box, nor for any of the other boxes on the network (one of which is ubuntu 9.10).
Ubuntu 8.10 simply will not connect to the new router. I'm presuming that something somewhere down deep has been compromised and I just don't know where to start looking or what buttons to push to reconfigure correctly. Router status displays show an IP address of 192.168.2.35 for this box, booted under all three operating systems. Using network-manager to force that static address instead of relying on DHCP does not seem to help.
Is there a way to configure exim4 to bcc all new incoming emails to another email address? My boss wants a copy of all outgoing emails.
I know postfix can do this with a bcc_always option. Im sure exim4 should be able to also.
I'm attempting to send email with a PHP application I got from a textbook. Do I need to start an email server in order to get the application to work?Using SuSE 11.2
View 5 Replies View RelatedIn my Windows environment, I use email client such as Microsoft Outlook to connect to our email server to send email with the following configuration:
Incoming server (POP3): 995 - (requires with SSL)
Outgoing server (SMTP): 465 - (use encrypted connection SSL)
[code]....
And the mail server requires user ID login and password.how do I setup a text command based email client in my Linux (Centos 5.1) to send out email through the existing email server above, which is in another machine? The email client has to be text command based because I need to use command line to send notification email from anothar application installed in my Linux (Centos 5.1) Since the email client will only be used to send email notification, I don't require setting up of an email server in my linux.
Using CentOS. I have a cron setup to run this command: Code: /var/test.sh | mail -s "Test Cron" mr182@somewhere.com The email is sent but the output of the script is not in the email body, it's just blank. I know there is some output because there are some echo statements in the script.I don't want to get an email for all cronjobs, just this one.
View 1 Replies View RelatedI have an email setup where all of the emails from our email host is downloaded to our Linux server using Fetchmail. Then some of the incoming emails are sent to an MS exchange server (server1.domain.com) using Postfix. What i want to do is to send a copy of all emails to Another server (server2.domain.com) for redundancy.Can postfix be configured to send copies out to both?
View 1 Replies View Relatedis there a way to allow unsubscribed email address to send emails to mailman list without having to manually set a filter for that email address?
View 1 Replies View RelatedDebian 5, apache 2.2 I've got Apache up and hosting multiple sites. Each site will have a php contact me page that will simply dump an email to a fixed address. What program should i be using to accomplish this? I've used nullmailer before but that assumes you have a fixed smarthost somewhere which I don't.
View 6 Replies View Related