Ubuntu Networking :: Network-Manager "Shared" Method Uses DHCP Range 10.0.0.0?
Aug 30, 2010
I am setting up a gateway Ubuntu box and trying to do this the easiest way possible. Using Network Manager in LL 10.04 I have eth1 (usb) accessing the net and eth0 (wired) set up and working. eth1 has a static IP address of 192.168.0.2 and the USB box has 192.168.1.1. This works and I have no issues with eth0. In order to allow eth1 to "share" the connection I have gone toIPv4 and change the method to "Shared to this computer".
Network-Manager automatically starts a dhcp server and assigns ip's from the 10.x.x.x class of IP's. I want to change the assignable ip range to come from 192.168.1.x. I have figured out that it is set in the dnsmasq-base package as uninstalling this and using:
Quote: >sudo service network-manager restart shuts down the eth0 completely - no IP can be assigned! Reinstall dnsmasq-base and it assigns it back with a 10.42.43.1 IP. (and all other PC's on the network are set to the 10.42.43.x range. Where is the dhcp range set?
View 4 Replies
ADVERTISEMENT
Feb 20, 2010
Using debain 5.0.4 with webmin 1.500 and dhcp3.i have two subnets (192.168.1.0 & 192.168.2.0)at home. The debain dhcp server has 1 NIC using eth0 and eth0:1 (virtual).
I have configured the dhcpd.conf file using webmin, with a shared network, given the two subents are on the same physical network. each subnet has a pool of about 20 addresses.Problem is that when a host boots up which is under the 192.168.2.0 subnet (using its MAC add - no fixed ip assignment), it gets the associated DNS and gateway ip addresses for this subnet, however, the ip address is assigned from the 192.168.1.0 address pool.
I have checked the net extensivly finding all sorts of discussions and solutions. My problem occurs in the same manner irrespective of whether i connect a host direct to the dhcp server or via a (netgear) switch! Please can someone advise on what settings i might be missing, or do i need to set up DNS/DDNS and/or a firewall/router before this works properly?
View 3 Replies
View Related
Jul 2, 2010
I have a problem with network manager. I use Ubuntu 10.04 on a Dell Latitude D530. I used to have the same problem with Ubuntu 9.10 before I upgraded. I typically connect to two wireless networks: HOME and WORK. Both networks are set to automatic connection mode. I am at work, I connect to the network WORK. At the end of the day, I just close the lid and go home. At home, I open the lid and have the following problem: network manager still displays the network WORK whereas it is clearly out-of-range and it automatically tries to connect to it. It does so until network manager asks if the password is correct.
If I want to connect to HOME, I have to tell network manager to do so. Then, I receive a notification that I am disconnected to WORK. Next morning, I go to work, and I have the same problem, network manager tries to automatically connect to HOME. What I would expect from network manager: when I am at home, NM automatically connects to HOME and does not display WORK, when I am at work, NM automatically connects to WORK and does not display HOME.
View 3 Replies
View Related
Jul 7, 2009
I have got DHCP issues with Network Manager. Whenever I try to connect using static IP it works, but when I use use Netowork Manager with DHCP, it seems to try to connect and soon says "Network Disconnected"..I've managed to connect to wlan and eth using network, so there shouldn't be any hardware/driver issue.
View 4 Replies
View Related
Oct 14, 2010
How do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.
View 3 Replies
View Related
May 24, 2010
I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.
However it does not get an ip address from the DHCP server. Below is what I get in the messages log:
View 1 Replies
View Related
Feb 6, 2010
I have successfully configured several dhcp servers, but I fail to see the need for a "shared network". what a shared network is in linux dhcp server terms and its advantage?
View 1 Replies
View Related
Apr 7, 2011
I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.
[87.186415] Stack:
Why I am getting this messages and more importantly how do I get rid of them.
The installation is on a VM on Hyper-V.
View 1 Replies
View Related
Jan 12, 2010
I am trying to remember how to determine the number of subnets there are in a given subnet range. The example range is shown below:Quote:217.133.64.0-217.133.127.255nce I did the binary conversions of the two addresses shown, the address that I got when comparing the two was the following:Quote:217.133.192.0he number of subnets I got from his was 63.Correct me if I am wrong, but is the number of subnets the difference between the number, in this case, the third octet and 255? If there is another, or correct, way of determining the number subnets what would it entail?
View 8 Replies
View Related
Jun 22, 2011
Working on ubuntu 10.04 on an IBM Thinkpad X61 laptop with an Alpha 2W wireless usb card on wlan0. Once in a while the wireless network disconnects and can't connect to any network in range (open, wep, wpa, wpa2). It looks like it's trying to connect but then asks for a password (even if allready given one) and if open just not finishing connecting and trying to connect to another network. Happends the same with wicd. Network card is working ok. Also with other computers. Drivers are installed correctly and power consumption management is off.
View 1 Replies
View Related
Jan 27, 2010
There seems to be a lot written about virtual networking but I am not sure what approach to take in my situation. My local subnet has a public block of 128 addresses. I have a virtual host running on my machine. My machine has a static address and I'd need to assign one to the guest. I have edited the guest's interface file and assigned a public address to it's eth0. However the guest cannot ping out and I can't ping in.
By default the virtual machine manager creates a virtual network (virbr0) and assigned a private address range to it. I have tried to create a new virtual network using a subnet of my public range (/31) but the manager says the range must to a minimum of 16 addresses (/4). It doesn't look possible to achieve my aims using the virtual machine manager.
In the past I have used the procedure laid out here:[URL].. which is to manually create a bridge. I am not sure that is relevant for my 9.10. I think I would have to disable the network manager if I were to do that and I am not sure how to do that.
View 1 Replies
View Related
Apr 22, 2011
I am using Debian 5 and I have some networking experience, however I want to learn to do this the best way possible. I have a Debian box with two nics and I want to connect that to a switch and use my Debian box as a router basically, as well as having a firewall setup within that too.
Should I use iptables to set up nat or the route command or what? I just want to know the group of tools to use in order to set up my network. Network diagram: Internet <------> Debian Box <----> switch <----> hosts I found some guides but they are for linux 2.4 and i'm not sure if they are right.
View 1 Replies
View Related
Jun 23, 2009
get me understand the short range and the long range links from routing (and routing protocols') point of view.
View 6 Replies
View Related
May 26, 2011
I have a DHCP server running on CentOS and for some reason it is assigning the highest number from the IP range as a first one?
- range 192.168.1.20 - 192.168.1.50 - so the first IP on my PC recived from this DHCP server was .50 - is it normal behaviour?
Config file:
View 1 Replies
View Related
Jul 24, 2010
how to display status of assigned & free ip addresses in a DHCP range assuming that i am working on a DHCP server ?
View 1 Replies
View Related
Mar 4, 2010
I using ubuntu 9.04. It was connected to the network with the manual IP Settings. Now the server settings have changed and we are supposed to move to Auto Assign IP (DHCP). All the windows machines are working fine, those are connected to network and using internet. But the ubuntu machine is not getting connected. Is there any any additional setting required for DHCP?
View 2 Replies
View Related
Jun 3, 2010
My router is a DHCP Server.My Access Point is a DHCP Server.I'm wondering if it is really necessary and usefull.Is it possible to get an IP from the Router through the Access Point.For exemple I connect my laptop to the wifi Access Point and the IP is given by the router only.
View 2 Replies
View Related
Jul 12, 2010
I installed dhcp on my Debian server and it was working fine.
untile I restart network with this :
And then dhcp was not working.
View 4 Replies
View Related
Jan 15, 2010
On my network drive web control panel I have got such an option:What would a dhcp server do on a network hard disk?
View 5 Replies
View Related
May 7, 2010
Trying to network three computers using dhcp.
Box 1: older Asus A7N8X-E deluxe w/onboard ethernet using dhcp
Box 2: new Asus M4A785-M Micro ATX w/onboard gigabit ethernet using dhcp
Laptop: Dell Studio 1745 w/Intel 5100 a/b/g wireless
Router: Linksys WRT54G set as dhcp server
Both windows boxes are set for workgroup "home"Laptop is "laptop.home"They can all connect outside to the internet but don't seem able to see each other, not even to ping each other.
View 13 Replies
View Related
Oct 21, 2010
I know there are tons of help guides out there for this, and I have looked at and tried them all. I am trying to do something really simple, and just can't seem to get it working. I have been trying on and off for the better part of a week now, with not much luck. What I am tyring to do is have a Ubuntu 10.10 server serve out DHCP addresses and be the DNS for the local network. The local network will have no internet access, so it only needs to know the names of the local server. My network setup is as follows:
1: Windows Vista web server
2: Ubuntu DHCP3 and BIND server to give IP's and resolve local names.
3: A bunch of tablet computers connected via dhcp to the network, that need to access the web server on the Windows machine.
I have DHCP working nicely, but it fails to propagate the hostnames to the tablet computers. Unfortunately I need this to work, as the tablets do not have the capability of having a 'hosts' file.I have tried just about every self-help guide I can find, and just can't seem to get this work. Everything seems to work fine except for the name resolution. Any help would be great, I don't have that much hair left to pull out!
View 5 Replies
View Related
Jan 16, 2009
I have a WET54g bridge that I am trying to get connected to a wireless network that only allows DHCP. The idea behind it is that I would like to connect the Cat6 out of the bridge to a switch allowing multiple wired computers to connect to the wireless network. The bridge will easily connect to the network once I put the WEP key in, however, there is a kink after that. When I connect the Cat6 to my computer and request an IP for that computer, it self assigns. This tells me that it is not talking to the wireless network through the bridge.
I can not find which IP address the bridge was assigned so that I can talk to it. The sub net is 255.255.240.0 which leaves quite a few possibilities. I know that the bridge is, however talking to the wireless network because the light is steady on the front of it which indicates just that. One other thing to stack on is that I know that there is a "splash page" which comes up when any computer connects. You click on the agreement and then you are allowed onto the network. How can I get my computer to talk through the bridge to the wireless network?
View 1 Replies
View Related
Jun 28, 2010
(although I'm running Solaris, I've posted here as I expect Solaris/LINUX is irrelevant) - more of a general network Q.I have a PC running Solaris 10 (hostname MARKUNIX) and a laptop running WinXP (hostname MARK-LAPTOP). Both are connected to broadband via a router. IP addresses for each are determined via DHCP (192.168.1.nn) and I do not leave either on, 24x7. I am running Oracle on MARKUNIX and want to be able to refer to it by hostname when using Oracle tools on my laptop.Each machine can ping each other ok by ip address and curiously the Solaris PC can ping MARK-LAPTOP (I'm not sure how it resolves that?) - importantly the laptop cannot ping MARKUNIX.Now I could add MARKUNIX to my laptops hosts file but that would mean changing the file each time I boot up as the ip address for MARKUNIX will keep changing (DHCP).
Is there a way to refer to MARKUNIX without having to keep changing ip addresses and use DHCP? As I understand it the 192.168 address is private and is not really the 'real' ip address and as such can be manipulated(fixed?) even whilst using DHCP?Am I right in thinking that a static ip from my broadband supplier is the ip of my connection (router) and I'll still have the same private network referencing issues?What I've covered above pretty much is the extent of my knowledge of networking so bear that in mind please.
View 4 Replies
View Related
May 4, 2010
Basically, I wanted to use the Bootp (PXE) protocol to boot a machine (my laptop) from my network instead of using USB/DVD boot medias to reinstall if need be. My router being a piece of crap, I couldn't setup the DHCP server to allow PXE packets. Confirmed from the manufacturer that it is not possible. Well for a $140 router, you would expect the opposite. Anyways, here I am with a small machine setup with Slack, no desktop environment (only CLI) and connected to my router (which I deactivated the DHCP) so the machine can act as a DHCP server. It works very well. However, I would like to install a few other utilities into that machine and for them to work, I need to put the machine between my cable modem and my router. Basically, here's the topology from outside):
Internet (ISP) --> Modem --> DHCP machine --> Router (no DHCP - acting as a switch) --> computers & printers
The problem is that I cannot connect to the modem from the computers on the network. Also I cannot access the internet (go on the WAN side) from the computers. From the computers (namely my laptop), I can ping the router, but cannot ping the interface where DHCP broadcast. Also I cannot ping the modem. From the router (using the web config page), I can ping the DHCP broadcast. From the DHCP machine, I can ping the modem. In the DHCP server, I setup the eth0 (the interface where the modem connect to) as a DHCP assigned IP so it can obtain the IP from the modem. The eth1 (the interface where DHCP broadcast) is static. All my machines obtains a IP from the DHCP machine without a hiccup.
View 13 Replies
View Related
Apr 19, 2010
I decided to take the plunge and change the existing static ip configuration for my home network to a dynamic (DHCP) configuration. The DHCP server in this new network config is my gt701-wg actiontec DSL modem.
[Code]....
View 5 Replies
View Related
Jul 1, 2010
I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
View 5 Replies
View Related
Jan 24, 2011
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
View 2 Replies
View Related
Jun 14, 2010
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies
View Related
Nov 18, 2010
I have in fact set the folder to shared.I can see my computer or "server" on the windows network.My router is all that ties my network together.And I have a criminal history...okay that last one was a lie.But really I'm stuck here I can't figure out how to let the windows network see my shared folder.
View 3 Replies
View Related
Feb 18, 2010
I have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies
View Related
