I'm using Ubuntu 9.10, I could setup gmail inbox in evolution.. but i'm constantly getting error for outbox.I'm getting the following error always ( i tried changing ssl to tsl, id name from 'id' to 'id@gmai.com'.. etc but none worked.
View 1 RepliesI have the 11.4 Gnome Distribution.everything is setup except my email sending.I have never been able to setup evolution correctly with gmail.I have followed the gmail settings of setting the smtp server to be smtp. gmail. com:465 and folowed the instructions here Evolution/FAQ - GNOME Live!to setup smtp.gmail.com with no port change.if there is no port specified the sending message window doesn't report an error it just hangs.
View 9 Replies View RelatedMy evolution mail is not able to integrate my gmail chat and facebook chat.It shows this error-
Disconnected-network error
I've spent ages trying to get evolution & Gmail to talk to each other. Whenever I press Send/receive it tries then I get 'Error while Scanning folders in "IMAP server imap.gmail.com" '. I've tried changing the ports etc, deleting the account from evolution and redoing it. I've looked thru various forums and walkthroughs. I've checked that the right password is stored in the keyring. I'm sure all my settings are right, but evolution can neither sync with my inbox nor send emails.
I have synced my google contacts and calendar with evolution, however. I use my Gmail on a variety of devices so I don't want to use POP and in any case SMTP isn't working either. I'm running ubuntu 10.04 on an acer 5738 thru a not particularly fast ADSL connection.
I've seen a bunch of other posts on this topic but they haven't solved my problem. I just installed Ubuntu Netbook Remix 10.04. Love it so far. Except, I can't figure out how to setup my gmail account in Evolution so that I can see the emails on the server or download them locally. I had it working before both in 8.04 LTS and a flash drive install of UNR 9.10. I really can't figure out why it is so difficult this time.Gmail settings are/were already on IMAP - checked while logged in through browser.In Evolution, I've tried changing the account name, user name (for receiving mail), etc. and different combos of same settings. The receiving mail settings I'm using for IMAP authentication are password and save password. Security is set to SSL.Evolution tries to access the server but never asks for a password. Likely, because something is wrong with my settings. I just don't know what.
View 9 Replies View RelatedHas anyone gotten evolution to work with gmail imap? Mine says it is connecting but it never downloads any messages nor does it give any errors. I'd sure like to make it work.
View 5 Replies View RelatedI have several Gmail accounts. On one of my Ubuntu-running computers (Hardy) Evolution remembers the passwords. Which is a good thing, as I can't remember one of the passwords.
When I'm out and about with my netbook, I like to check my email. But I don't use Evolution on the netbook; I access the Gmail accounts via the web. And because I can't remember the password for one account, I can't check it.
Obviously, on my Hardy desktop, Evolution/Ubuntu remembers the password - so it must be stored on the computer, right? How do I get Ubuntu to tell me the password?
I want to forward mail from the evolution mail program (2.22.3.1) to my gmail account.
View 2 Replies View RelatedIn general, sending to people with gmail accounts fails although it works for others.Here's the error message:Evolution ErrorError while Sending message.RCPT TO <someuser@gmail.com>failed:<someuser@gmail.com> No such user hereI have Evolution Sending Email set to Server Type: SMTP.
View 8 Replies View RelatedI use Evolution with my Ubuntu lucid lynx. My email server is optonline.net. I can't send to from my evolution to yahoo mail or gmail. If can send from optonline.net web mail.I am wondering whetherI have a wrong setting or is it something with evolution itself.
View 3 Replies View RelatedI have configured Evolution to use my Gmail account. I am able to read my Gmail, but I have not been able to send email. I have found instructions to do this from several sources, which include the Gmail website and Ubuntu help at HTML Code: [URL]. The instructions from all sources have been consistent:
Instructions for Sending(smtp) Mail from Gmail:
1. Server: smtp.gmail.com
Note: Some ISPs block port 25, if you are having a problem sending mail, substitute smtp.gmail.com:587 for the server information above.
2. Server requires authentication: Checked
3. Security: TLS encryption
4. Authentication: Plain or Login
5. Username: johndoe@gmail.com
I have also tried using port 587 and 465 as alternates. When I try to send an email, there appears to be two stages: it successfully completes the first stage that refers to POP, but gets stuck on the second stage that refers to SMTP.
I follow the introduction like the web page, want to set up gmail for Evolution.But When I try to send or receive a mail,it always failed.Check the debug logs,showing:Could not connect to pop serverCould not connect to smtp serverCould anyone know what I should check ,in this machine I can connect internet no problem.
View 4 Replies View RelatedIs there any way to configure Evolution to use GMail ?
View 2 Replies View RelatedI'm on a fresh Ubuntu 9.10 x86_64 install and I'm trying to configure Evolution to grab my email from Gmail using IMAP.
For receiving mail my server is set to imap.gmail.com:993 and my user name is ___@gmail.com
I'm using SSL and the authentication type is "Password"
If I click the "Check for supported types button, the "Please wait. Querying server for a list of supported authentication mechanisms." window pops up, but it never finishes.
When I try to sync my mail, evolution doesn't ask for my password, and the send and receive mail window displays my account as "Scanning folders in "IMAP server imap.gmail.com" indefinitely.
Running Evolution from the terminal doesn't seem to print any IMAP related errors only
Code:
** (evolution:5565): CRITICAL **: atk_object_set_name: assertion `name != NULL' failed
POP works fine, but that isn't really an option.
I use evolution 2.26.1 on my jaunty machine. I have a couple of gmail accounts, and use pop3 to have that mail sent to evolution on my computer. All was fine until a few days ago. Then I noticed that I was no longer getting mail from my freecycle account sent to my machine. I went to the gmail web interface and saw that freecycle mail is still being sent to me. But gmail isn't passing it along to my evolution. The odd thing is, other mail from that gmail account *is* reaching evolution okay.
View 3 Replies View RelatedI'm trying to set up my gmail account with Evolution. I am trying to set up a mail client where -
1) All the mails are stored locally, so that I can work offline. When I reconnect, the client (Evolution) syncs with the server - sends emails and updates any changes.
2) All the labels/folder system to be respected and retained.
After struggling with various sites that argued Pop3 and IMAP (numerous blogs and google searches), I came across this conclusion (pls correct them if they are wrong)-
1) Pop3 allows mails to be stored locally, but will not break them up into folders.
2) IMAP will allow the folder system, but will only store the headers of mail on the local server, and the content will be downloaded as per request.
1) Will Pop3 access allow syncing between the local version and the server version? For instance, a mail read in Evolution should be marked as read when I sign into the web-interface as well.(I can always create a filter/rule that replicates gmail filters)
2) Will IMAP allow me to store all mail locally (isn't this exactly what IMAP is not!)? The combination of imap-gmail-evolution was not so successful when I tried it out - too slow!
PS: I would prefer Evolution over Thunderbird so that I can integrate the Calendar. However, if ThunderBird is the easiest solution, then it's fine too...
I have been using Debian for about 2 years now, I have decided to use my email through Evolution (actually both my live and Gmail accounts). Right now my problem lies with Gmail so I will just mention that...
Evolution simply does not accept my gmail password when I log in. I have gone through the whole "Evolution Setup assistance" many times, and whenever the setup is done, and I proceed to open up the program and actually log in to my email> I enter my password and click "ok", and then the same login screen simply flashes and asks me to enter my password again! This is the entire problem. I cannot go beyond the login screen, and evolution simply asks me to enter my password again, and again, while never logging me in. And yes, the password is correct as I use the very same one to log into gmail's web interface several times a day. Imap is also enabled in my gmail account.
I have used Gmail's imap and smtp configuration information from [URL]..... and it simply does not work, even though I put all the information into Evolution Correctly.
I'd like to configure Evolution (or Thunderbird) to delete Gmail messages. When I select messages and hit "Delete", the messages go to my local trash and they loose their Inbox label in Gmail. I would like that in Gmail, they loose their Inbox label and go to [Gmail]/Trash so that they'll be deleted after a month.
Could I configure the "delete" key of my keyboard to move msg to [Gmail]/Trash ? Could I configure another key to move msg to [Gmail]/Trash ?
What other solution ? Because moving to the trash is not convenient, it takes a lot of time without a key shortcut.
[Code]..
My college internet providers shifted to a different setting.. defined in the changing lan proxy settings on the user end. I.e.ip - 192.168.0.200 and port to 3000. This to reduce misuse of the net connection ..The thing is, since then, every other website is working, except GMail. It isnt blocked, the Nebero page shows up for blocked sites. When attempting to open gmail, the default internet page shows up for unavailability of page owing to no or slow response from the server, or the firewall or proxy settings not appropriately configured. I cannot open gmail, the connection on empathy im. I cant ping gmail either. No response. What can be the problem.
View 9 Replies View RelatedEvolution works fine for receiving mail, but I cant send anything.When i hit "send/receive" itll receive but ask for smtp password every single time. My understanding is that the password is your email password, but it wont accept it.
View 4 Replies View RelatedIs there any way to have Fedora use gmail as the default system email instead of thunderbird or evolution?
View 1 Replies View Relatedfor like two weeks I have been trying to send email using evolution for some reason I always get the same Code: Could not connect to smtp.gmail.com: Input/output error
View 6 Replies View RelatedI am pretty new to C.L.I/text editing work. So maybe its a bit old-fashioned but I am interested in learning how to send email via the command line. I am running 10.04 32 bit
Situation: I have followed the explicit and step-by-step actions at http://klenwell.com/is/UbuntuCommandLineGmail
Question: Upon completion, when trying to send a test email to myself via gmail (from CLI) I get the following error: "msmtp: no recipients found". In CLI below it asks me to explicitly pick a mailx to download. I think I already have mailx as when I type mailx I get "no mail for primary".
Here is my work
Code:
:~$ sudo apt-get install msmtp mailx
[sudo] password for:
Reading package lists... Done
Building dependency tree
Reading state information... Done
msmtp is already the newest version.
Package mailx is a virtual package provided by:
mailutils 1:2.1+dfsg1-4ubuntu1
heirloom-mailx 12.4-1.1
bsd-mailx 8.1.2-0.20090911cvs-2ubuntu1
You should explicitly select one to install.
E: Package mailx has no installation candidate
:~$ gedit ~/.msmtprc
:~$ chmod 600 ~/.msmtprc
:~$ gedit ~/.mailrc
:~$ echo -e "testing email from the command line" > /tmp/test_email
:~$ mailx -s "mailx gmail test" xxxxxxx@gmail.com < /tmp/test_email
msmtp: no recipients found
Here is ~/.msmtprc
Code:
# config options: [URL]#A-user-configuration-file
defaults
logfile /tmp/msmtp.log
# gmail account
#account gmail
auth on
host smtp.gmail.com
port 587
user xxxxxx@gmail.com
password xxxxxx
from xxxxxx@gmail.com
tls on
tls_trust_file /usr/share/ca-certificates/mozilla/Equifax_Secure_CA.crt
# set default account to use (not necessary with single account)
#account default : gmail
and here is ~/.mailrc
Code:
# set smtp for mailx
# gmail account (default)
# $ mailx -s "subject line" -a /path/attachment recipient@email.com < /path/body.txt
set from="xxxxxx@gmail.com (xxxxx)"
set sendmail="/usr/bin/msmtp"
set message-sendmail-extra-arguments="-a gmail"
I have never tried to do anything 'remotely'.My 87 year old uncle lives in British Columbia, Canada and I live in Quebec, Canada.Here is what I would like to try to do:
I would like to connect to his PC from my PC and then set up a Gmail email account for him. I think that I am saying that I would like to be 'as if' I were sitting in front of his PC at his house.If this is possible, what software do I need on my Slackware PC to connect to his Windows PC? What software does he need on his PC?
trying to setup smtp with gmail to send notification form my forum (phpbb3) actualy nothing work even mailx, does anyone have a tutorial to make this works
View 2 Replies View RelatedI just setup my Ubuntu Evolution. However, it says my most recent message is 8/11/2009??? Also, inside my inbox it also has my sent mail aswell. I'm using Ubuntu Evolution 2.28.3 (Ubuntu 10.04). I'm using gmail with Ubuntu Evolution.
View 1 Replies View RelatedCan anybody teach me step by step, how to setup XXXXXXX@ymail.com in Evolution..
View 1 Replies View RelatedI have a "Forward to" filter set up in Evolution. It halfway works. The emails I want forwarded are matched and put in my Outbox. The problem is that the emails are never sent. I have to manually click the "Send / Receive" button. If left alone, the emails will sit there over the weekend, never sending until I hit Send / Receive.
View 1 Replies View RelatedI have been using evolution for my email for about a year.It currently has 2 accounts set up.I want to create a third account so I went to Edit > Preferences > Accounts > Add.On the first page I click on "forward" and on the second page enter the new details. New name, new email address and when I'm finished I click on forward again and the second screen comes up. It has some server details on it iirc. Sadly after 2 seconds or so this screen disappears and the very first screen re-appears (where the only thing to click on is "forward").What's happening? Is 2 accounts the maximum? Any clues please?
View 3 Replies View Relatedi've installed freepops and i need a to set up my evolution to get mail from yahoobecause it always fail and nothing happen
View 1 Replies View Related