Ubuntu Networking :: Connect To Network At Startup?

Jul 16, 2010

I have a wireless network adapter that I finally got working with Ubuntu 10.04, but now I have a question. Is it possible for the network adapter to connect to my network at startup, rather than waiting for NetworkManager to do it?I was able to do this in 9.04, but since Ubuntu started using upstart.

View 5 Replies


ADVERTISEMENT

Ubuntu Networking :: Network Doesn't Auto-connect At Startup

Jan 5, 2010

I have a Broadcom 4312 wireless chip. I have use the STA drivers that Ubuntu recommends. I can connect quite easily just by clicking on the icon, so this is more than a niggle than a problem.

My network isn't protected as we live in the middle of nowhere (quite literally) and network theft isn't a problem. We also run a self-catering cottage, and let guests have free access to our network anyway, so it is easier for guests to access our network without me having to give them all the key. When I did use wpa, it would start itself up with the laptop, so I kind of know that this might be the cause. Is there any way I can fix it without encrypting the network?

View 2 Replies View Related

General :: Server Hangs At Startup To Connect To Ldap Before Network Service Starts?

Jul 6, 2010

I am using centos 5.5 x85_64 2.6.18-194.3.1.el5 The server is hanging at start up due to the follwoing error

udevd[746] nss_ldap reconnecting to LDAP server (sleeping 4 seconds)
udevd[746] failed to bind to LDAP ser er ldap://192.168.0.100 cant contact ldap

It fails and then tries again, and again, each time increasing the sleep time. This is happening before network sercvices are started so ther is no way it can connect to ldap. anyone know a way to fix this problem?

View 2 Replies View Related

Ubuntu Networking :: Connect To Wireless At Startup?

Dec 5, 2010

every time i log in to ubuntu, i run this line to get the drivers working or something (not sure what it does, it just works):

sudo modprobe -a wl

where can i put this line so it automatically happens, rather than always having to run it manually @ the terminal?

View 1 Replies View Related

Ubuntu Networking :: Wireless Is Slow To Connect At Startup?

Mar 7, 2010

I am running 9.10 on my compaq laptop. I tried linux a couple years ago and was not impressed with it's operation on this machine (wifi didn't work, pain in the butt to make it work) but I just installed 9.10 and to my surprise, everything on this machine seems to work now automatically!

One minor annoyance though, when I boot my machine and the gnome desktop loads, it takes about 1 minute until the wireless finds and connects to my router. Granted, my SSID is set to not broadcast but I set ubuntu to find it as a hidden network and it does in fact work, just takes more time than usual to find and connect. Normally with windows, when it loaded, my wifi was present and connected immediately.

View 4 Replies View Related

Ubuntu Networking :: Connect To The Internet Through Wifi, But Cannot Connect To Anything On Network?

Aug 8, 2011

I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.

View 9 Replies View Related

Ubuntu Networking :: Startup Networking Automatically Using /etc/network/interfaces

Jul 2, 2010

I'm on an embedded system that doesn't have Gnome, and I'm trying to startup networking automatically using /etc/network/interfaces. Here's what I have.

[Code]....

eth0 comes up just fine. wlan0 comes up, but it's unable to acquire a DHCP address. I added the following lines to /etc/rc.local, and wlan0 comes up all the way, but I'm not too crazy about this hack.

[Code]....

View 1 Replies View Related

Ubuntu Networking :: WiFi With Wpa2 Encryption Doesn't Connect On Startup

Dec 27, 2010

I have xbmc, a media center shell that runs on ubuntu. I am trying to set up a laptop to run it and be a full time media center. so far it works great, I installed xbmc live, but the only issue is I have a wep2 protected wireless router and the wifi does not connect automatically.

I have it set up and am using wpa_supplicant once those commands are run the wifi works great.I am a novice in linux in general, and can not seem to get this to work on startup, can anyone point me in the right direction on this? I haven't been able to find the xbmc start up script if one exists, I figured adding those lines to it might work,does this sound like a reasonable approach? if anyone knows where that is and how it is defined to be launched on start-up i would appreciate it(I guess this is getting into the general Linux knowledge but still good info)

View 2 Replies View Related

Networking :: Debian Wireless - DHCP At Startup - Can't Connect Once In Gnome

Apr 14, 2010

I am trying to get my intel pro wireless 3945abg working on this Lenny installation. My progress is as follows:

No wireless & LED (on the physical switch) won't turn on
installed NdisWrapper and netw5x32 driver
installed package "firmware-iwlwifi_0.14+lenny2_all.deb"

[code]....

Still no wireless, but when DHCPDISCOVER runs at startup, it is apparently assigned an IP address using wlan0. This only happens when the cable (eth0) isn't plugged in (eth0 is set to static) which leads me to believe that the wireless really does work for DHCPDISCOVER.

What I want to know so that I can mess about with it more is how do I switch between drivers? What I have been doing here is

Code:

modprobe -r [old driver]

and then

Code:

modprobe [new driver]

View 2 Replies View Related

Ubuntu Networking :: Network Manager Will Not Auto-connect To New Network After Resume?

Jul 1, 2010

I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:

Code:
#!/bin/sh
case "$1" in

[code]....

View 5 Replies View Related

Ubuntu Networking :: Sudo Iwlist Scan Works But Cannot Connect To Network Using Network Manager

Jun 14, 2010

I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.

View 4 Replies View Related

Ubuntu Networking :: Network-manager And Wicd Can See But Not Connect To Network

Jul 10, 2010

I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".

I've found many, many threads with people who had the same problem, but none of their fixed worked for me.

I also tried to get wifi going manually, using this guide, but that didn't work.

View 3 Replies View Related

Ubuntu Networking :: /etc/network/interfaces Not Booting On Startup?

Sep 23, 2010

When I boot into Ubuntu with the Xfce desktop then proceed to terminal to check my IP it is always some random IP as provided via DHCP by the router. If I then go to the cmdline and type sudo /etc/init.d/networking restart then the wifi correctly connects to the router to the one static network address that I have specifically provided for it - as stated in my interfaces file. Why is this not happening on startup?

View 2 Replies View Related

Fedora Networking :: No Network Connection On Startup?

May 11, 2009

Suddenly, for no reason apparent to me, on initial logon I don' t have an eth0 connection. I click on the Network Manager icon in the tray, and connect that way. But it would be nice if it connected automagically. How do I fix network to connect on 1st logon?

View 3 Replies View Related

CentOS 5 Networking :: Network Doesn't Run At Startup?

Mar 31, 2011

I have to type /etc/init.d/network start everytime after log in.I search little over internet and found out some command to fix it so i tried it but i got error response.Here is what i typed and what i got response.[root@winn ~]# system-config-netbootbash: system-config-netboot: comman not foundI also tried to find setting but i could not under Applications > System Settings > Server Settings > Network Booting Service.Also my ifcfg-eth0 files is below:

# Intel Corporation 82566DM-2 Gigabit Network Connection
DEVICE=eth0
BROADCAST=192.168.1.255

[code]....

View 5 Replies View Related

Networking :: Unable To Connect To Wi-Fi Network With Network Manage

Nov 21, 2008

I'm unable to connect to a particular home wireless network under Fedora 9, although I can connect to it using WinXP on the same machine. My Fedora installation is able to connect to my college's unsecured wireless network, so it's not a driver issue I think.It seems to be an authorisation issue, as I'll describe below, but there's one other thing that's bothering me. The SSID for the network I have problems with is for some reason not listed in Network Manager's drop-down list, nor is it in the output of iwlist wlan0 scan. But I'm pretty sure it's not a "hidden" network - I don't know exactly how those work, but I helped the owner of the wifi network in setting it up, and don't remember doing anything that would make it hidden. As far as I can remember, Windows found the network automatically without having to be told the SSID. What's the best way to confirm whether it's a hidden network or not?

Anyway, I try to connect by selecting connect to other wireless network in Network Manager, and entering the SSID. As far as I can tell from the error messages below, the machine does contact the network and attempt to connect, but I'm not authorising myself properly. That may be a completely wrong diagnosis, but hopefully someone can see from the below info whether it's correct or not.I'm not sure which option to use for "Wireless Security": at the time we set up the network, it gave us a Hex WEP key of 26 characters, which is 104 bits. But none of the options in Network Manager's list match that. Here are the options it has, and the error message I get with each one:None - if I select this, it fails to connect, with no error message.
WEP 128-bit passphrase - if I select this and attempt to use my 26-character WEP key, it brings up a new dialog, saying "Passwords or encryption keys are required to access the wireless network [SSID]." It has a drop-down box labelled "Wireless Security", but this time the only option is "None", and the connect button is disabled, I can only click cancel.
WEP 40/128-bit hex - as above.
WEP 40/128-bit ASCII - The connect button is disabled when I try to use the WEP key, as the string is too long. Despite the fact that it says 40/128-bit, it actually accepts 5 and 13-character strings (40 or 104-bit). Since I've got a 104-bit hex key, I tried converting it to ASCII, but it consists of mostly unprintable characters, so I'm not sure there's any way to actually enter it into the textfield. I might have done something wrong here, so I've put my code below to see if anyone can point out a mistake.
LEAP - requires a username, not applicable here I think. Windows doesn't need one, and we don't have one from when we set the network up.Dynamic WEP (802.1x) - requires username, private key and various other things, all N/A WPA & WPA2 Personal - Brings up a dialog with the same text as for "128-bit passphrase", but this time "WPA & WPA2 Personal" is the only option in the drop-down list, instead of "None". It asks for a password, so I just enter the hex key again - now it asks for the password for the Gnome Default Keyring, which I don't think I've ever set up. Don't know if I can go any further with that, but my understanding is that since we were given a WEP key when we set up the network, WPA will be N/A.WPA & WPA2 Enterprise - as Dynamic WEP. N/A.Hopefully that's enough info that someone can help diagnose the problem. Some of the behaviour of Network Manager described above doesn't make sense to me, and I'm wondering if it's buggy.

View 14 Replies View Related

Ubuntu Networking :: Cable Modem Networking - Can't Connect To Each Other On The Home Network

Feb 14, 2010

I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.

View 2 Replies View Related

Ubuntu Networking :: Cannot Connect To WPA Network?

Jan 19, 2010

I cannot connect to a WPA-PSK network that 2 friends on Windows computers can. Please help me since I only make a little money online and need the net to earn money for food, and I don't use Windows Here's what I do:

Code:
airodump:
00:12:CF:6C:57:73 -66 99 286 7 2 54e. WPA TKIP PSK suat1

[code]....

View 1 Replies View Related

Ubuntu Networking :: DWA-130 Won't Connect To Network?

Mar 20, 2010

I managed to install the driver for a Dlink DWA-130 (is a ver. E) and it appears that the computer recognises it. It also sees nearby access points. But, when I try to connect to my home network it asks for the wpa password over and over again after attempting to establish a connection. I'm using 9.10 and installed the driver by using ndiswrapper

View 7 Replies View Related

Ubuntu Networking :: Can't Connect To Network

Apr 22, 2010

I just installed Ubuntu 9.10 today. I am TOTALLY new to the Ubuntu world, and the first thing that happened was my the OS not picking up my wireless network. I am running a compaq presario c306us.

View 3 Replies View Related

Ubuntu Networking :: Can't Seem To Connect To The Network?

Apr 28, 2010

I recently picked up a belkin f5d7050b.; I know that It is working as the network icon in the applications bar at the top shows my network. for whatever reason I can't seem to connect to the network however. every time i click on it, it says network disconnected.

View 5 Replies View Related

Ubuntu Networking :: Can't Connect To Ad-Hoc Network

Oct 7, 2010

I have managed to create an Ad-hoc network on my Ubuntu box as my university doesn't have wi-fi and I need my Ipod touch & wireless printer to be connected most of the time.

Now I managed to get it all setup working perfectly of which was of a relief yesterday - However today I faced a problem that is still baffling me.

I booted up Ubuntu today and managed to connect to the web via eth0 but my wireless seem to take ages to connect. Eventually it popped up with the authentication prompt where I inputted the password. (several times, it kept coming up ) However I had no success connecting then. I tried clicking on the box 'Available to all users' and the next time it tried to connect it just took an age supposedly connecting and eventually failed saying the wireless disconnected. What is strange is that my Ipod touch can connect with the same password being used almost immediately yet ubuntu cannot

View 3 Replies View Related

Ubuntu Networking :: IBM R51 Cannot Connect To Network?

Nov 15, 2010

I have an IBM R51 laptop which I would like to run on ubuntu (as I'm currently running Maverick on my Desktop and like it very much)I have run the liveCD and everything runs OK except for the wireless network, which although it detects my wireless network, will not let me connect. I have edited the wireless connections with my SSID, (WPA) password, etc, but when I try to connect it will not connect.I have also tried this on an unsecured wireless network with the same result.Running lshw -c network shows the following information:

*-network:0
description: Wireless interface
product: PRO/Wireless LAN 2100 3B Mini PCI Adapter

[code]....

View 9 Replies View Related

Ubuntu Networking :: Seeing Network But Can't Connect?

Dec 9, 2010

Before I explain my problem:This is my first post so I do apologize if this post is in the wrong category.Also I would like to apologize for my bad English because my native language is Dutch. I know there are allot of the same topics. but I can't find a right solution for my problemMy problem:After using Ubuntu 10.04 for a while I decided to upgrade to Ubuntu 10.10. After the upgrade and restart the problems started.

I wasn't able to connect to my WPA secured network. This was because there was no network in the list to connect to. I installed ndiswrapper, and installed a Windows driver. Blacklisted the old one and yes. This worked. Then the next morning exactly the same problem. I tried to repeat the same process. To bad. This time it didn't worked. I removed the old driver from the blacklist. and tried to update. No luck at all.I searched the forums. I figured to get a list with networks. but when I click mine and enter the pass-phrase it says it's connecting but keeps asking for the pass-phrase, then eventually disconnect.lsmod

Code:
michael@michael-laptop:~$ lsmod
Module Size Used by

[code]....

View 7 Replies View Related

Ubuntu Networking :: Can See WPA Network But Cant Connect

Mar 24, 2011

I have 2 systems running ubuntu - 1 Karmic and one Lucid - that I am having problems connecting to my wireless network with. On both systems I am trying to use the same USB wireless dongle - a Linksys Wireless G 2.4Ghz 802.11g. On both systems it picks up my network (amongst others) but will not connect. I try to connect, enter the password/key and it processes for a little while an then just comes up with "You are now disconnected...".

I have a BT Homehub (gen 2 I think) which is set up to use WPA/WPA2 (from memonry). I did try downgrading it to WEP and got connected (only tested on one machine) but dont much like using a less secure system.

So I fall upon the mercy of those who are better than me to try and guide me through this. I have looked into it on the forum but couldnt really get my head around the problem.

Give me some info on where to start and how to diagnose the issue?

Just in case anyone wonders - we have a laptop running karmic (im posting this on it now) that has no issues connecting so the network is accessible. I assume the problem I have lies with the linksys adapter and the software using it.

View 9 Replies View Related

Ubuntu Networking :: Cannot Connect To A Network Using DWA-140?

Apr 30, 2011

Linux-user, but this has got me scratching my head. I followed this on how to install and configure the DWA-140 to work with Ubuntu 11.04, and "iwlist scan" outputs all of the networks. When i try to connect to my network however, the icon up in the right corner with the signal bars just keeps on going until it prompts for a password to join the network. I enter the password and it goes on for some time, and then it prompts me for the password again.

I'm using a D-Link DIR-655 with the "Only N" mode active. It works fine on other computers (Windows, sigh) but not on my Ubuntu one.

View 9 Replies View Related

Ubuntu Networking :: How To Connect To Network

Jun 21, 2011

I install 11.04 in my laptop, and now i wana test the 11.04 in my office network.We have a server, that shared the database off our programs in a SAMBA drive. All the others workstations have windows instal and use that databses to work in the programs we have.What i'm traying to do is conect my 11.04 to that network, share files with the others PC, and work in the programs i need like in a win worksation tru wine/crossover. My main problem is that i don't know how to conect to the network and see the other workstations.

View 4 Replies View Related

Ubuntu Networking :: Cannot Connect Via USB Network Adapter

Jan 7, 2010

I have a Belkin N150 USB Wireless Network Adapter and a Belkin N150 Wireless Router. I cannot seem to get NetworkManager to connect to the internet. I have blacklisted the 9.10 staging driver and associated rt files. I have downloaded and built the ralink 2.3.0.0 driver. The light flashes on the usb but I cannot connect to internet.

lsusb output:
jerry@jerry-desktop:~$ lsusb
Bus 002 Device 003: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 002 Device 002: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:09c2 Logitech, Inc.
Bus 001 Device 005: ID 050d:935b Belkin Components
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsmod output:
jerry@jerry-desktop:~$ sudo lsmod
Module Size Used by
rt2870sta 554908 1

iwconfig output:
jerry@jerry-desktop:~$ sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ra0 Ralink STA ESSID:"11n-AP" Nickname:"RT2870STA"
Mode: Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thrff Fragment thrff
Encryption keyff
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

I am not sure what the ra0 is telling me but what about the Access Point: Not-Associated statement? Does that mean that the network adapter is not connecting to the router?

View 1 Replies View Related

Ubuntu Networking :: 9.10 - Cannot Connect To Wireless Network

Feb 4, 2010

On my laptop HP presario, I installed Ubuntu 9.10 (Wubi). My Windows Vista connection works fine, but the Ubuntu cannot find my wireless network. My network card is the Belkin Wireless N (F5D8233-4v3). Do I have to use the ndis. On my desktop here, (wired) Ubuntu found my card without me having to do anything. What should I do. (unistall ubuntu and make do with Vista?)

View 3 Replies View Related

Ubuntu Networking :: Can't Connect To Network With DHCP

Mar 4, 2010

I using ubuntu 9.04. It was connected to the network with the manual IP Settings. Now the server settings have changed and we are supposed to move to Auto Assign IP (DHCP). All the windows machines are working fine, those are connected to network and using internet. But the ubuntu machine is not getting connected. Is there any any additional setting required for DHCP?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved