My Asus k52 BBR9 was working great with Meerkat until I put in all the updates.Now it won't recognize my wireless: it says were connected and the icon is clear or it is dark or has the icon look pulsing where there is my connection. But I can't get online.
View 2 RepliesI've seen several posts with people having problems of the speakers not muting when headphones are plugged in.I have no sound from my speakers to begin with.I am by no means an ubuntu expert, so please bear with me.From what I've seen, there are many variations of the Asus K52F. Mine has an Intel Pentium P6200 processor. So far as I can learn, it's got a Conexant sound chipset. Ubuntu does not even seem to recognise that a sound card is present.
View 1 Replies View Relatedjust installed opensuse 11.3 on my asus eee pc 1018p and have severe problems to make the wireless network card work. tried to install the driver with ndiswrapper and b43-cutter, but without any success. ifconfig does not show any wlan0 device. below find output of
lspci -v
dmesg
ifconfig
installed opensuse on several notebooks/netbooks before but never ran into serious trouble.
[code]...
I recently purchased an Asus n10 wireless usb adapter to use with my media server, running Ubuntu 10.04 LTS (Lucid Lynx). After spending several hours today with many of the threads (especially this one about the Asus n13) it seems that I've run out of ideas.
My network is running a hidden (non-broadcast) SSID ("Potato") with wpa2 personal encryption.
Here is the relevant information from lsusb:
Code:
Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer Inc.
Iwconfig follows. The rest of the values, like link quality & etc, are all zero:
Code:
wlan0 802.11b/g ESSID:"Potato"
Mode: Managed Access Point: Not-Associated Bit Rate: 0kb/s
And the kicker is that the interface doesn't seem to be available, despite the above reports. ifconfig wlan0 up produces:
Code:
SIOCSIFFLAGS: Resource temporarily unavailable
Im a newb to ubuntu just wiped my brand new asus 1001p netbook of windwos 7 and put ubuntu netbook remix on it 9.10....Everything works great except the wireless...I know theres probally a billion topics on this, but i just need step by step easdy to follow guide on how to do this...I asked the IT at my work and he claims it cant be done, unless i switch out the internal wireless to a card that "just works", which im not comfortable with or use a usb wireless stick, which defeats the purpose of a netbook being so small....Im sure this can be done so please help me show up a IT that doesnt know linux .BTW the wireless card is a atheros thats all i know..
View 8 Replies View Relatedi installed ubuntu on my netbook after having a successful install on my asus g51 laptop.
everything works fine except the wireless. for some reason the netbook wont pick up internet via the ethernet connection so i went and got the drivers via synaptic and copied the packages plus the dependencies required (just needed one - dkms). dkms installed fine, but there was an error when i tried to install bcmwl-kernel-source. ubuntu still sees it as installed tho looking in ubuntu software center.
i rebooted just for shits and giggles, cuz it still didnt work. no dice. then i tried to check in that section that shows drivers that arent allowed in a default install as per another thread. its not in there.
my situation doesnt let me connect this netbook via wire and the only way i can get software for it is to download it via my ubuntu connection on my laptop.
I need some help getting my wireless card working.I have a ASUS PCE-N13 and I'm running ubuntu 10.10 AMD64.I have confirmed that the card works running under win xp.The problem I have is that it can't see any available networks.I have downloaded and compile the latest driver from ASUS rt2860sta 2.1.0.0 and added these lines to the blacklist file.
blacklist rt2800pci
blacklist rt2800usb
blacklist rt2x00lib[code]...........
I have been using ubuntu troublefree for some month, but yesterday, suddenly the wireless internet connection stopped working. It happened after i used the turn off wireless network shortcut, now i cant turn it on again (usually this works fine).The situation is now, that when i click on the tray icon showing connection it says, wired network disconnected (it never said this before), then if i click on the wireless shortcut it also says wireless disconnected... But if i click again it doesnt show connections, the disconnected sign just disappears...?
View 7 Replies View Relatedrecently I bought a an Asus n13 usb wireless adaptor. It came with the linux drivers installed and some brief instructions, but make failed and I don't know why. I am running ubuntu 10.10 (64bit) and gcc version 4.4.5.The error messages from make
Code:
[angus@angus-laptop 2009_0811_RT3070_Linux_STA_v2.1.1.0_USB-N13]$ sudo make
make -C tools
make[1]: Entering directory `/home/angus/bin/drivers/2009_0811_RT3070_Linux_STA_v2.1.1.0_USB-N13/tools'
gcc -g bin2h.c -o bin2h
[code].....
I trouble someone to provide some assistance on how to properly install this thing and get it to work? I have been all over the web trying all sorts of different "tutorials", but most of them start off okay, and then I get errors in the terminal, or the commands in the tutorials become specific to one person's particular system, and I can go no further. I really want to use Ubuntu 11 on a system that currently is running the reprehensible Windows Vista, and if I could just get this Wireless receiver to work, I would be able to format Vista into oblivion.
So, can someone start at the very beginning, and help me through this? Please keep in mind that I am as green as a leprechaun when it comes to Ubuntu, so please make instructions verbose and geared to a layperson, if it wouldn't be too much trouble. So, the unit is plugged in, and ready to go. What's first?
I've tried a few suggestions in similar threads.. to no avail. I thought I had it fixed a few days ago when I noticed that the wireless would randomly disconnect only on battery power. So I tried "iwconfig wlan0 power off" and then reconnected. It worked, for a while, but then after minutes/hours later it will disconnect and stay disconnected until I restart. If you need anymore information, let me know. I might need to be walked through the process; though, as I'm a worthless noob.
View 1 Replies View RelatedI haven't been able to find anything really useful on google either. Was hoping you guys could point me somewhere or explain a process that might work. What I've tried so far is downloading the driver from ralink and trying to follow their procedure for getting it setup. Following the readme I get lost at step 3 and attempting to make it, I get:
[boardbox@niflheim ~]$ cd Desktop/2010_07_16_RT2860_Linux_STA_v2.4.0.0
[boardbox@niflheim 2010_07_16_RT2860_Linux_STA_v2.4.0.0]$ make
make -C tools
[code]...
but this hasn't fixed my problem either. I can see networks but I can't connect to anything, so kinda still stuck at square one.
EDIT: Turns out in frustration and absent-mindedness I didn't reboot and that fixed it.
Running Ubuntu 10.04 Unable to get Ubuntu to find the ASUS USB Wireless to connect for network. I got the Broadcom to work using ndiswrapper but the range on it is unbearable meaning I have to be in the same room as the router. Hoping this has a much better range.
[Code]...
I just got a new Asus Eee 1001P, and the wireless isn't working at all. I had an Asus EEE 1005HA before that and since both use the AR8132 network card I hoped it would be the same problem as with that, where installing the backports fixed the problem. However, that doesn't do anything. With the 1005HA the connection was only flaky and disconnected a lot, but the 1001P doesn't find any networks to connect to at all. Also, the mobile wireless will connect only once and after disconnecting every attempt to reconnect ends in that connection symbol spinning wildly until I tell the network manager to disconnect. On Kubuntu it doesn't even connect once.I never had that problem with the 1005.
Code:
$ lspci
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
02:00.0 Network controller: Atheros Communications Inc. Device 002c (rev 01)
[code]....
I have ASUS Laptop A6Rseries was running XP untill I installed Linux 9.10. Now i am having problem connecting to my wireless network. I am using Belkin router what works fine with XP, Vista and Windovs 7. Here is some information what I found
lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
[code]....
I have a 6 month old Acer (sorry not Asus as per the heading) Aspire laptop. I downloaded Ubuntu and cannot connect via wireless. It works fine via ethernet. Having spent several hour reading this forum, other web pages and the help file, I actually still have not got a clue either as to what the actual problem is or how to begin solving it. Is there a simple answer? If not, I'll go back to windows 7 as Ubuntu seems anything but the promises made.
View 1 Replies View RelatedMy wireless worked out of the box for the past few months. When I was running low on battery recently, I put the laptop to sleep. When I woke it up, there was a black screen with a flashing underscore. I pressed a bunch of buttons but nothing happened. Then suddenly it said something about a wireless hardware error and I did a hard reset by holding down the power button. When I turned the computer back on, wireless was greyed out. There's no hardware switch to enable and disable wireless and the software switch had no effect. I tried echoing into the 'state' of the adapter but it didn't let me. When I tried sudo ifconfig wlan0 up it gave me the following error:
Code:
SIOCSIFFLAGS: Unknown error 132
lspci:
[code]....
1. Installed a fresh 10.10 and upgraded all packages (via Ethernet).
2. Downloaded latest drivers from ASUS webiste (DPO_RT3070_LinuxSTA_V2.3.0.2_20100422)
3. Unpacked and tried to compile:
The wireless card is working with the driver rt2870sta, but I've read not all the capabilities of the device is unleash unless the native driver is used.
I just installed and Ubuntu doesn't recognize my wireless card HP dv2945se. I can get a wired connection. I can't figure out what kind of card I have (did the terminal command line, have no idea how to read it) or how to install a driver for this OS (HP's site just lists drivers for Windows). How to get the wireless card recognized?
View 9 Replies View RelatedSomeone had just given me a pc with no OS so I installed ubuntu 10.04. The pc has a wireless card but I cannot seem to get the OS to recognize it. My wired connect is fine but wireless is non-existent.
View 7 Replies View RelatedI'm trying to proselytize and have installed Lucid on my receptionist's Gateway M500 with an Orinoco PCI Mini wireless card.
The card works in XP, but when I boot into Linux, the network card indicator light doesn't turn on, and lspci gives me this:
No wireless card
Pressing the on-off wireless button does nothing.
What can I do to turn on the modem so that Lucid sees it?
I have lucid installed on my hp laptop without any problems, and I went to install it on another hp but the I can't connect to any wireless network. I tried to follow this thread's advice [URL] . Because it's pretty much the same problem except I think the wireless card is from a different Intel family but it didn't work.
Basically wireless networks won't show up, in fact the network icon only has "wired" as a menu option.
I tried to follow the thread, even though I had no idea what it was saying as far as instruction goes.
ive installed ubuntu 11.04 and my broadcom wireless is not recognized.
View 8 Replies View RelatedOS Version: CentOS 5.3
Motherboard: ASUS M3A78-CM (BIOS v.2003)
I have a single disk running the base OS and just installed 2 x Seagate 500GB SATA 3.0 drives in a RAID1 set that I would like to use for data storage. The OS sees the drives individually but not the RAID. Has anyone worked with a similar board and has any ideas what I need to do to get the OS to recognize the RAID1 array?
On a new ASUS eee PC 1015P, the Windows 7 o/s supplied works fine. Experimenting with a Fedora 14 Linux o/s, currently just booting to a Live User system on a USB Stick, there is no wireless networking. In case it is relevant, the wireless LAN Card details (as reported from lspci) are: Ralink RT3090 802.11n 1T/1R Wireless LAN Card Driver Version 3.1.6.1 Should I be expecting wireless to be working on the USB version, do I need to do a full install to get wireless or is it maybe a drivers problem?
View 3 Replies View RelatedSo I decided to wipe out Windows and try Slitaz. It's an awesome well featured distro for it's size. One huge problem tho: I can't get wireless to work for the life of me. I actually went as far as to manually load the ath5k module but It just refuses to recognize my wireless router, much less any nearby routers. It simply doesn't see anything when it scans for wireless networks. I have no problem with that in Puppy Lucid. But I'd really like to use Slitaz, just for it's small size and quick bootup. Can anyone PLEASE help me with that?
PS: It happened here before that I had to plea and beg for any response, so PLEASE(!!) don't let me hang like that this time.
I am trying to maintain another computer that runs Ubuntu, and everything seems to be running smoothly except for one thing: the wireless. Due to distance issues, I cant use a cord, but the computer is close enough to get a signal. am using a Netgear wnda3100 wireless usb adapter. I installed Ubuntu on the computer because I heard that the device was supported in Ubuntu, and it wast after a while, the adapter is no longer recognized. I have had to reinstall multiple times, and I'm no longer in the mood to reinstall. Does anyone on the UF know hwo to fix this
View 2 Replies View RelatedI just installed 10.04 on my EeePC 1000HE, and wireless isn't working. My card isn't listed when I ifconfig. I've messed around with installing the Windows drivers, but nothing has worked so far.
If it's useful, I popped off my battery and it said something about the wireless controller "NE766".
No wireless networks can be recognized in Ubuntu, and now after several attempted fixes, my wireless toggle button won't switch from orange to blue. My wireless card is Atheros AR5001. I posted in the absolute beginners forum, but I've played around so much that I think I can move on to this one I'm so sorry if posting another thread is bad etiquette, but I need to have wireless access by Friday morning, and am slightly desperate.
Attempted fixes: First, I installed the backport modules using Synaptic. Then, I installed the madwifi driver. After those failed, I used ndiswrapper to install the Windows driver (linked from the ndiswrapper page). I made sure to disable the madwifi driver and restart first. My output all looks normal--I blacklisted everything mentioned in google searches. Here is the current output of ndiswrapper -l:
Code:
ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in
[code]...
I upgraded to 10.04 from 9.10. I had no problem connecting to my wireless network with 9.10, but can't with 10.04. The network shows up as available, but it won't connect when I enter the security informationBelow are the details and the information I've seen requested from others with a similar problem.I'm at my wits end.Dell Inspiron 8200 Laptop with TrueMobile 1150 wireless card.
will@will-laptop:~$ sudo lshw -c network
*-network
description: Ethernet interface
[code]....