I am running the Ubuntu Netbook Remix and setting up our systems for Active Directory Domain Authentication. When I am hard wired in (ethernet), AD authentication works with no problems using the Likewise-Open software (installed through Ubuntu Software Center). What I want to be able to do is have people authenticate with AD with only a wireless connection. Has anybody done this before?
View 1 RepliesHas anyone had success in getting likewise open or another tool to allow domain users to log in with wireless networking? I have an issue where GDM comes up, users attempts to log in and gets authentication error. After a few minutes it works. Centrify has the same issue.
I've tried removing network-manager and using /etc/network/interfaces to set up networking, which helps, but there's a 1-3 minute delay before a user may log in for the first time after a reboot. My theory is gdm gets loaded before networking is up. There's got to be a work around for this. Even having gdm just hanging for a minute while it waits for networking would be acceptable.
I have set my Ubuntu 10.04 box with our Windows domain. I can see from "net ads info" that I am on the domain. I can also get the password and group info with getent.So far so good. But I have tried to configure pam basically by following this guide:http://www.ccs.neu.edu/home/battista...nbind/pam.html
Yet when I try to su or login as an AD user I just get and immediate "Unknown id: <userid>".I have had a look at /var/log/auth.log and there are no errors there.Can anyone provide some tips on debugging the pam configuration?
I have successfully connected (and authenticated the user) from linux (Ubuntu) to Active Directory (windows 2003) using "Likewise Open".
1. at the login screen I have to enter "example.localusername" to login. how can I simplify the login so that the user can choose (click)the domain and just enter the username and password (like the login in windows) or make the domain the default.
2. how can I configure the default user profile? meaning, when the user login for the first time, I want to configure his profile. does it use the "/etc/skel" directory like the regular local login?
What is the The easiest way to authentication Active Directory with opensuse.
View 2 Replies View RelatedBut here is my problem... I have a windows 2003 server mini tower ATX running VMware workstation 7.0 that has a Ubuntu server 32-bit and a Ubuntu desktop; both versions are 10.04. Now, my ubuntu server edition joins active directory just fine, but my ubuntu desktop does not.
Here is my /etc/samba/smb.conf file:
[Global]
workgroup = XXXXDELIGHT
security = ads
realm = XXXXDELIGHT.BIZ
idmap backend = lwopen
[Code]....
The scenario is I have a Windows Server 2003 Domain Controller which runs ADUC. I have created some security groups which I would like to apply to my network shares. The problem is, the majority of my network shares are based on Open Suse machines which, although are part of the domain, when trying to configure the shares using SMB, do not allow me to select the Active Directory groups. Any solution which will allow me to use ADUC security groups?
View 3 Replies View RelatedI'm having a problem with Active Directory and Share permissions that I cant seem to figure out. I used likewise-open to join my ubuntu server to a windows 2008 domain. Everything seems to be working fine. The problem is, the only way I can access the shares is if I CHMOD 777 the share directory. If I CHMOD 770, the Domain owner or Domain group member of the directory cant access the directory. Also, when creating a folder within the share, I need to set the directory mask as 777 in order to enter those sub folders.
Heres the share section from my smb.conf
Code:
[public]
comment = Ubuntu File Server Share
path = /srv/samba/public
browseable = yes
[Code]...
I'm having a problem with squidguard filter with AD authentication. I have downloaded the latest stable source package from squidguard site and I followed the instructions for the ldap(AD) authentication but it does not work at all.I have googled and tried everything but no luck. (first 30 hits on google) Anyway this is the LDAP auth part: http://www.squidguard.org/Doc/authentication.html at squidguard and this is how to build the package.
View 2 Replies View RelatedI am testing CentOS 5.4 on a virtual machine before deploying to a server.I am trying to get authentication through our Active Directory server, without actually joining the machine to the domain.I tried multiple tutorials, including this one: URL...Basically I enabled authentication through kerberos and modified my ldap.conf file.
View 1 Replies View RelatedI want to create a network similar to windows network on linux .Users should have profiles and can do network login similar to active directory on windows.
View 2 Replies View RelatedI've got this current configuration : 1 squid server authenticating with 1 forest abc.com, then another company wants to joint but in different forest efg.com, I've already configured trust relationshipt between them.
How should I configured at squid.conf so it will authenticate both domain ?
At squid.conf I've already configured like the following below for abc.com :
Is it enough to adding a new line for auth_param basic program for efg.com ?
I have running on RHL enterprise 4. I want to configure squid users to authenticate against windows 2003 active directory. How do I go about from scratch
View 1 Replies View Relatedworking to sort out the damn wireless for too long. Mine in cent05 5.2 . network manager is on and I can see the icon on tray. It list all the wireless connections too, but just won't connect. WPA encry is disabled. further details below:
# lspci | grep Wireless 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
# ethtool -i eth1
driver: ipw3945
version: 1.2.1dm
firmware-version: 14.2 1:0 ()
bus-info: 0000:0c:00.0
[Code]...
I am running fedora from the USB. My computer is Dell - inspirion. I tried to configure the wireless according to the instructions. I added new a device ...
I see the new device but it's written inactive. The Active/inactive buttons are disable (or not seen at all). How can i resolve/Active the wireless?
I've very new to linux, so please excuse my ignorance. I am trying to setup a number of servers to authenticate against my Windows Server 2003 active directory. I have successfully done this with one computer (Dell Optiplex 755), but I can?t seem to get it to work with my servers (Dell PowerEdge R710). I am using Fedora 11. I have setup samba and pam and have successfully joined the network. Everything with winbind seems to be working properly and I can get all the user info, etc. When I log in with a local account, everything is fine. If I try to log in with an account from my domain through SSH, I see the message Code:/usr/bin/xauth: creating new authority file /home/apkelley/.XauthorityAfter that, nothing happens and it is as if I haven?t connected to anything. If I try to log into the actual server using the graphical interface, it starts logging me in, shows a blank screen for about a second, and then returns to the login screen as if nothing has happened.I would greatly appreciate any suggestions for how I might fix this problem or how to find out more information about the error.Here are my smb.conf and system-auth files:
/etc/samba/smb.conf
Code:
[global]
[code]....
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
I got ubuntu working fine on my netbook and wanted to play around with opensuse. I have it installed and everything works fine except my wireless connection. I have updated everything since the installation through a wired connection, that didn't help. I have read the stickies, but to be honest, I'm so new to this stuff I'm kinda lost. So my wireless network has a WEP encryption and I have entered that password as a 64 HEX Key in the Wireless Manager widget. It connects to the network and says is labeled as active, however there is still the yellow exclamation shield next to the connection. Firefox and other apps don't have access to the internet.
View 9 Replies View RelatedWhich package I need for install AD for linux ubuntu server 9.10
could you help explane my in example, which package i need install in server and which package i need install in client.
System Information:openSUSE v11.2 32-bitdesktop: KDE 4.x (.3 I think)Background info: Installed openSUSE 11.2 on an old HP laptop this morning. I've been trying to set up my wireless connection since. After 2-ish hours of searchingupport forums, I managed to use network manager to connect to my home wireless network via WEP, I will say now that I've had lots of trouble.
I've finally been able to connect to my network, to a point. The NetworkManager in openSUSE says that the wireless connection is active. I can verify this by saying that on the other conputers in my house (winXP, win7, and Ubuntu v9) I have been able to ping this openSUSE computer and my router recognizes it as part of the network. Here is where the problem arises: I cannot access the internet from the openSUSE machine, with a domain name or by trying to type in an ip address, and I cannot ping other computers on my network with it.
What is the The easiest way to authentication Active Directory with ubuntu.
View 2 Replies View RelatedHow can I sync files from Windows Server 2008 to a Linux box? Windows Server can sync files to another active-directory box automatically. Can i do that with linux too?
View 2 Replies View RelatedJust installed Alfresco 3.2 using the Canonical repo in Karmic. Unable to find proper guide to enable Active Directory authentication.
View 3 Replies View RelatedI would like to set up Some kind of windows user manager in an ubuntu sever. The windows network is already set up. I've scoured the net for hours and found nothing.
View 3 Replies View RelatedI am having a problem using smbclient on my Ubuntu 10.04 workstation. I use likewise open5 to authenticate to a windows server 2003 domain controller. I installed the smbclient utility mounted the network drives to the local desktop, then all of a sudden I cannot logon to my active directory domain controller. If any one knows what I am talking about what am I doing wrong?
Do I need to change my smb.conf file? Or do I need to download another repository or utility?
I have ubuntu server 9.04 installed on my computer and I am trying to make a Domain Server. I have made sure that there are no problems in the configuration file. When I go to join the domain in windows 7 it tells me that it cannot find the Active Directory server.
View 2 Replies View RelatedI've been trying to find a single set of instructions that define how to configure Fedora 12 to authenticate using Active directory without 100 steps (plus or minus) but difficult at best. I have about 12 Fedora 12 servers running as stand alone servers in a Windows 2003 network.
Can someone point me to a great set of instructions that can easily be replicated across multiple servers and a few workstations?
I'm actually a software developer, develop exclusively on Linux, and do know how to go about taking care of a Linux distro, so don't start telling me that 'sudo' isn't a sushi roll...
Question... I want to implement an Active Directory like authentication in a Linux-only environment. My office has approximately 15-25 local desktop PCs all running Ubuntu 10+ and one Ftp & SVN server running Ubuntu 10+.
Each developer has his/her own personal local account on his PC, and the shared PCs have different, local accounts for those developers. The FTP server has ONE (!!) account that everybody uses to access it, as does SVN.
The big picture is that I would like to install & configure a VPN server for remote developers. Before doing that, I'd like to find a way to unify the users across the network so that there exists only one UserX in the network.
I want to integrate the postfix with active directory that postfix can get the user information from active directory.
View 10 Replies View Related