After several google searches and forum searches, installing restricted repos, encoders, codecs, ffmpec still REFUSES to encode H.264. Here the output of an FLV to be converted:
[Code]...
There's so little documentation for GLC that it's nearly impossible to get it working. I just tried encoding a file I made using the script provided, and got this output:
Code:
joseph@joseph:~/Desktop$ sh encode.sh lugaru-17880-0.glc
[: 103: lugaru-17880-0.glc: unexpected operator
[code]....
when using windows xp i used to use tmpeng to encode films is there any good applications to use on ubuntu ?
View 4 Replies View RelatedThis is my first post in this forum. After trying out every video compositing program I found for Linux, I am about to settle with KDEnlive. It looks like the best allrounder professional program in this section to me.
I only got one problem. I cant encode files with mpeg-4. All options here are grayed out and if I hover over one of the options for a moment it's going to tell me:
"Unsupported audio codec: libmp3lame" Whats funny is that it worked a time before i reinstalled my system. I also checked and I got libmp3lame installed. So why has KDEnlive problems to access this library?
Is there a way to encode video using the Cinepak codec on Linux? FFMPEG can only decode.
View 9 Replies View RelatedI recently installed Ubuntu 10.10 after using 10.04. While using 10.04 I used ffmpeg quite a bit and just a few days ago I was using ffmpeg to encode video with the h263p codec.Anyway, for some reason ffmpeg no longer seems to want to decode h263p anymore. If I type "ffmpeg -codecs" to get a codec list, I get" EV h263p H.263+ / H.263-1998 / H.263 version 2"When it used to be "DEV" for decode / encode video. But now just " EV"Even on the ffmpeg website here http://ffmpeg.org/general.html#SEC3 it says ffmpeg should still be able to decode h263p. Yet, it can't!I've tried installing all sorts of codec libraries and I even followed a guide to download and compile ffmpeg myself. Nothing seems to change.
View 8 Replies View RelatedI can't for the life of me find the option to encode my video in H264 in Pitivi. There's just about every other codec imaginable in the list. I'm running Ubuntu 11.04 32-bit and everything is up to date.
View 2 Replies View RelatedI used K3B to rip some of my DVDs (using the Xvid codec) onto my laptop to take away on holiday with me. This worked fine for 2 of the DVDs but the 3rd one ended up with the audio out of sync with the video. Fortunately VLC comes to the rescue with the ability to offset the video and audio tracks.Is there a way to re-encode the ripped files to permanently fix the offset.
View 4 Replies View RelatedI have a lot of old video footage around that, I am ashamed to say, I encoded with heavily proprietary codecs like DivX and such during the dark ages (aka. the Windows Times).
Now, I would like to redeem myself from the mistakes of my past by re-encoding everything into open formats.
Since those videos are often not of the best quality (poor camera, poor codecs, poor knowledge), I do not want to loose more quality in the process.
So, to avoid any more mistakes in the future, I would be glad if someone could answer me some of the following questions:
1. Is it even possible to re-encode those movies into something like x264/vp8/theora without loosing any more quality?
2. What tools should I use for that? Command line is actually preferred.
3. What would be the most desirable format to have? I'm thinking about x264 in Martroska with ogg Auto. Is there anything better suited?
i need to know more about openssl.In particular i'm having problems with some basic coammand-line stuff to do with signing and base64 encoding.You'll have to excuse me but i'm a security n00b. What is the command for signing some text file with a given private key and then after that base64 encoding the same file.Can this be done with a single command? what's wrong with:
Code:
openssl rsautl -sign -in textfile -inkey privatekey.pem enc -base64 -in textfile
or should that be:
Code:
openssl rsautl -sign -in textfile -inkey privatekey.pem | openssl enc -base64 -
I've been trying to convert video files to play on a psp, I used to use this command
Code:
ffmpeg -y -i inputfile -acodec aac -ab 128k -ar 48000 -ac 2 -s 480x272 -vcodec h264 -b 384k -coder 1 -flags +loop -cmp +chroma -partitions +parti4x4+partp8x8+partb8x8 -subq 5 -me_range 16 -g 250 -keyint_min 25 -sc_threshold 40 -i_qfactor 0.71 -b_strategy 1 -level 21 outputfile.mp4
[Code]....
I get a lot of spam recently and I think is from my contact page... how do I encode my email address so that It won't be picked up by spam bots?
View 3 Replies View RelatedI would like to cut a part out of a huge mp3, and want to do it without it being re-encoded.Does such an editor exist for Linux/Fedora?
View 6 Replies View RelatedI'm new to commandline, and I'd like to:
$mencoder -ffourcc DX50 -oac mp3lame -ovc lavc about 10 files...
How to write that?
we have postgresql database in our server. when i tried to install our application it throws some error like "org.postgresql.util.PSQLException: ERROR: encoding UTF8 does not match locale en_US Detail: The chosen LC_CTYPE setting requires encoding LATIN1". the locale which is set in our server is
[code]...
I don't know how to approach to solve this error.
I was trying to find a shell script that will encode video to a an iso that I can burn for a dvd. It seems I have lost a few of my dvds and I backed them up into mkv and I need to convert it to pal so it will work until I find them. My search was leading to other formats, but I was wanting to use pal because it is smaller. My search lead me here, but this shell script is not in pal.I need a solution that would work with slackware.
View 2 Replies View RelatedI'm trying to create a script that will trawl through a directory structure looking for VOB files, convert them to AVI and place them in a ./converted/ sub-directory of the the original source folder. I've knocked up the script below which appears to work fine when I place an "echo" in front of the actual ffmpeg encode line, I get the output on the screen with ffmpeg finding all the VOB files in the directories and looking to convert them to the correct sub-directory. Yet, when I remove the echo and run the script for real, ffmpeg converts the first file and then stops. No errors. Is this something to do with ffmpeg or a problem with my script below?
Code:
#!/bin/bash
#
[code]...
I Updated from Fedora 9 to Fedora 13 several months ago and noticed that AAC audio encoder was no more available in Avidemux (I use version 2.5.3.3 for fedora 13 from rpmfusion repo)Unfortunately AAC is mandatory on the IPod (and probably other Apple devices) to have the sound working.I had faad2-libs (decoder) and faac (encoder) packages installed, but avidemux was not using them.After some search on the web, I found that faac support was removed because of legal issues.Some people recommend to rebuild Avidemux from source but this was a little bit complicated, and I found an easier solution.
In fact the only thing needed to add AAC support to Avidemux is to add the required libADM_ae_faac.so library in /usr/lib/ADM_plugins/audioEncoders, as it is no more supplied in the package avidemux-plugins. Searching for libADM_ae_faac.so on the Web, I found some packages containing this file, such as the ones from other distros, and the package for the same Avidemux version than the one I use but for Fedora 11 : avidemux-plugins-2.5.3-3.fc11.i586.rpm.
What is an easy way detect corrupt movie file during or before using ffmpeg to encode them? is there a command I can use to check if the file is not corrupt and then pipe it ffmpeg or standard input?
View 1 Replies View RelatedI'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 3 Replies View RelatedI keep getting the following error when I run the following:
Quote:
# iwconfig wlan0 key s4ssw0rd Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid Argument
No matter what method I try for setting an encryption key for my card, it doesn't work. I am only able to connect to wireless access points that don't use encryption.
details: I have an Atheros AR9285 wireless card, I have the mac80211,ath9k modules loaded. Also when I run lspci, my Atheros AR9285 card shows up on the list. I am using the 2.6.30.9 kernel.
I have a 3 monitor setup with a 9800GT and a 6800GT. The 9800GT is linked to my main monitor (20" viewsonic 1680x1050) and a 40" Toshiba 1080p LCD TV. The 6800GT powers a secondary 1280x1024 dell LCD. I have the SPDIF connector plugged into the 9800GT and in sound preferences Hardware tab I have Digital Stereo (IEC95 output selected, but I get no sound on the TV. PS All three are on separate x-screens.
View 4 Replies View RelatedI tried playing a vcd on my lucid lynx and it was giving problems. after i put the cd in the cd-rom i could see a CD icon on the desktop as well as an autoplay wizard asking it to play with Movie player.
and when i said yes it gave an error saying
Code:
"Could not open location; you might not have permission to open the file."
now when i try i to see the cd from terminal i could find that it was mounted at
/media/VideoCD/
[Code].....
Ive recently switched to Ubuntu from Windows XP and me and a friend had finally got things going for me, with everything running pretty darn well. A couple days ago we decided to install VirtualBox with Windows 7 and for a day everything worked well enough but yesterday I discovered that I had no sound whatsoever on Ubuntu but oddly Win 7 on VB had audio running without any discrepancies.
View 4 Replies View RelatedWhen ever I install windows I have to manually install this [URL]Well. I downloaded wine and tried it and it said Unknown error. So, how would I go about getting my sound driver then? I really need sound I do not have anything under Hardware, Output or Input in the Sound preferences. I've already tried OSS, I think I installed ALSA but I do not know how to work it. I've downloaded a tar.bz2 pack for alsa, where is a deb. I hate configuring stuff, I want something I can click and install.
Code:
Audio
Sound Card
SigmaTel High Definition Audio CODEC
Playback Devices
Digital Output Device (S/PDIF) (SigmaTel High Definition Audio CODEC)
[code]....
I upgraded to 10.4 (64bit) Ubuntu and since then have been unable to rip CD's using the procedure in the Official DocumentationUbuntu Documentation > Ubuntu 10.04 > Music, Video and Photos > Music > Extract from a CD.But when a CD is placed in the drive Rhythmbox would not run.Typing rhythmbox in a terminal (with a CD) in the drive shows the message segmentation fault.
I found in the documentation that sound-juicer was used in the ripping process and as this was not installed - so I installed this.I can now rip a CD using sound-juicer and can run rhythmbox when there is no cd in the computer but I am a little puzzled as to what is happening.
Recently pulled the plug on Windows 7 and changed completely to Linux. Don't regret it for a second and I will now stay Linux for the long haul. Just a couple of issues have emerged though....
1) All dvd's I have tried so far, do not play in Movie Player. Error message was:Location not found. (dvd file name does appear in play list though it does not play....I have let it search for plug ins and updates but the return was: Plug in not found (though it does not say what plug in was not found....which I hoped it might then I might know what it was...).
2) Vodafone MBB K3570-Z doesn't want to play ball either. Noticed no install message, not even as a recognised usb device.Looked at similar posts and tried editing, deleting and retrying. Ensured the user, password, APN, were all properly edited, but not a peep out of it.Also selected mobile broadband in network settings. But no connection at all. Also tried the usbmodeswitch too.
Prior to the release of the update 11.04 I had sound working perfectly. When the update came out, I lost all sound. I have run through all the forums and threads and websites I can find trying to find a fix, no luck. I have no start up sound, no sound from any program. I installed PulseAudio and it shows that there should be sound, but neither speakers nor headphones have sound coming from them.
View 7 Replies View RelatedI am using mpd and ncmpcpp as a music player. Until today it worked perfectly fine but now when I play a song it begins playing but with no sound (yet sound works in every other program). I am using a creative x-fi xtreme gamer sound card.
Here are my configs:
~/.mpdconf:
Code:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
[code]....
I get no sound. Not even the little signature tune you're suppose to get when you start up ubuntu. When I go
Code:
aplay -l
I get:
**** List of PLAYBACK Hardware Devices ****
card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4]
Subdevices: 1/1
[code]....
Then I tried the alsamixer just too make sure that the speakers was not muted.
Code:
alsamixer
The last thing I tried was adding my user name to the /etc/group. Before it was
Code:
audio:x:29:pulse
but now it says
Code:
audio:x:29:myusername
is where some bullet proof way to test the sound card? Now I'm running some random mp3 which might have some fault in itself. what must I do to get the sound to work?
