Ubuntu Multimedia :: Software For Survilience Cameras?
Jun 19, 2010
I am very new in Linux in general. I installed ubuntu 10.04 in a server that I want to be a CCTV server and record video from my survilience cameras. It was very hard to install the driver (it's a generic card from DX with 4 inputs) but finally it worked.in Xawtv I see the camera, but I need a good software to capture it. I tried to install zoneminder but it's too difficult to me as a newbie in linux. I installed wxCam and it worked, but it's only for one camera, I have two. I need a software that can capture from both cameras in the same time and not so difficult to install like zoneminder.I want something that will just work, just install and run.
View 1 Replies
ADVERTISEMENT
Aug 4, 2010
I recently made the switch from windows and mac system to fedora 13 64 bit kde, which has been a challenging 6 months, not having a IT background. Anyway, overall now that I am getting the hang of it I really like fedora 13 kde, nice job guys. I have one final obstacle remaining that I have not been able to figure out. I have the necessary rpms for video and sound. I am able to successfully copy video from DVD's and play them from hard drive without issue using VLC. However, when I try to import avi files from my camera's sd memory card, the videos always end up "corrupted" and when repaired do not play sound. Again, I can play AVI's from dvd's fine. Interestingly, I can take the same files from my fedora box and copy them onto a usb stick and transfer them into my mac and they play fine.
I suspect there is a codec issue possibly with VLC, but not sure. I also tried on the default player, but cannot remember the name of that right now and my wife is presently watching her Mary Kay dvd on it as it is hooked up to our TV . My video codec knowledge is pretty basic. Can someone point me in the right direction of what the problem might actually be, another post, something?
View 5 Replies
View Related
Aug 29, 2009
I have a small issue that I would <3 to get worked out . Here is the skinny of it. I have a laptop running Ubuntu 9.04. It has 3 USB ports. I have 2 Logitec Quickcam 4000's. I am using zoneminder for viewing the cameras. The issue that I am running into is as follows. I can not seem to view both cameras at the same time. If I unplug one of the cameras the other will work fine and vice versa so I know the cameras work.Here is the output of lsusb without the cameras
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
After plugging the cameras in
[Code]...
I looked around on the web using all the google-fu that I have available to me and I just cant seem to find what I am looking for. I was even going to make my first attempt at compiling the driver but I don't really know where to look for info regarding bandwidth limitations...nor do I really know where to place the driver source, and what to do after I make make install .
View 6 Replies
View Related
Oct 24, 2010
I'm running ubuntu 10.04 and suddenly when plugging my cameras or usb sticks, they don't automount anymore, but they did before. What changed is last days I tried to build and install nautilus-sendto manually from source, and it required dependencies including GTK+3.0 (unstable), I don't know what happened exactly or if my system is broken, because some of this packages built and installed fine and others failed. If someone wants to help with that to get my installation to its original state it would be awesome.I could mount my usb stick installing usbmount, it worked, but I didn't need this before.What I want now is to mount my cameras: here is the output for:
Code:
lsusb
gvfs-mount -l
[code]....
View 2 Replies
View Related
Apr 3, 2010
Does anybody know of any digital cameras that can be controlled via Debian? I'm not speaking of a webcam but a digital camera, and I'd like to be able to send commands to the camera via usb; perhaps by means of a bash script that would take snapshots every x seconds for a total duration of y seconds.
View 2 Replies
View Related
Sep 11, 2010
I've written a simple web page and I want it to display live stream from one of my IP cameras. I admit I've never been interested in HTML ... How should I go about this? I can see the stream in browser using following link [URL]
View 4 Replies
View Related
Aug 19, 2010
I have a DVR with a Linux Operating System, I have a problem viewing my cameras from another internet server that is not the Internet Server where my DVR is. For example I have spoken with my internet provider and checked DNS, Gateways, ports and all the numbers that I configue my DVR, which has a Linux Operating System, and even made the updates, but still I cannot view my cameras from outside this same internet provider.
View 3 Replies
View Related
Aug 25, 2011
How to connect HDMI camera to Linux? I have tried a few cameras such as the Bullet HD. I was never able to make it work in my CentOS, Fedora, I returned their product finally, it was a nightmare. Therefore instead of risking for next failure I am looking for a definitive answer on this, so that no driver issues arise under Linux and finally allow me not to use Windows or Mac anymore. Has anyone ever had success with making a very very good quality camera work in Linux, such as for example this one? Which HD cameras are there for Linux? There should be no driver issues and they should also allow me to perform pan/tilt/zoom actions using USB, Firewire or the S-Video interface.
View 2 Replies
View Related
Dec 29, 2010
Simple. UUID is apparently limited to a single UUID to be defined. Example UUID="DEB0-0001","3338-3164" separated with a comma is not working.
What could be the linux alternatives for pluging several UUID disks? How to bypass when there is a CF card and a reader box, since blkid gives no UUID ?
Code:
UUID="DEB0-0001" /media/pendrive vfat users,rw,noauto,umask=0000,uid=1000,gid=1000 0 0
#UUID="3338-3164" /media/pendrive vfat users,rw,noauto 0 0
#TYPE="vfat" /media/pendrive vfat users,rw,noauto 0 0
View 3 Replies
View Related
May 28, 2010
I have been setting up multiple security system in the area and was wondering what was the easiest way is to get the camera information that one would need in setting up survellance systems like zoneminder. I use xawtv for testing and
PHP Code:
zmu -d <device_path> -q -v
But how can I get specific information about NTSC/PAL cameras or IP cameras. In other words is there a specific tool for that purpose? I can see my video cameras fine using xawtv -c /dev/video but can I look at those log files to see what setting it used for the cameras
View 1 Replies
View Related
Jun 29, 2010
<<mod edit: no longer relevant after moving post to new thread>> I'm currently trying to find which web cameras RHEL desktop 5.x supports. Does anybody have a list? (I was searching through hardware.redhat.com, but it is mainly oriented to server and workstation elements)
View 2 Replies
View Related
Aug 4, 2011
Is it possible to install Snavtclient, as i don't have much idea but i heard that i can view cameras online for AVTECH DVR once it is installed, i tried to download and install it through terminal but got this error.
*** The sdl-config script installed by SDL could not be found
*** If SDL was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the SDL_CONFIG environment variable to the
*** full path to sdl-config.
Edit/Delete Message
View 8 Replies
View Related
May 2, 2011
I've a question regarding two camera images. Suppose I've detected 2d window coordinate of 8 markers of an object in a scene in one camera and detected window coordinates of 10 markers of the same object on another camera.
I've detected the marker. It was easy. Now how do i know which window coordinates on two cameras are the coordinates of same marker? I mean there are markers captured on both cameras and some of them are representing the same marker in both cameras. I just like to know which ones are same on both cameras. Is it possible to find that out using opencv?
View 2 Replies
View Related
Jul 7, 2010
I wanted some input on chronic problems with Ubuntu:
1. Why does wireless almost never work right on Ubuntu?
2. Why, when Ubuntu just decides to turn off my wireless card, can I not just turn it back on?
3. Why do tar balls almost never unpack right?
4. Why are printer drivers so buggy?
5. Why do my MP3 players and digital cameras not work with Ubuntu?
I spent 3 hours last night trying to unpack a tar.bz2 file so I can run my Ralink network card. It worked fine until my son unplugged my computer. Now my card is disconnected and it will not reconnect. When I check forums no one has a simple answer for something as simple as turning a network card back on. On my Apple, it's simple: click my wireless icon and hit "on." tell me an easy way to just turn my wireless card back on, it would renew my faith a little in Linux.
View 4 Replies
View Related
Oct 12, 2010
Ubuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies
View Related
Jan 28, 2010
I have a Dell 1525 and I just installed Ubuntu on it. The Multimedia keys (previous, stop, play/pause, next) and volume control keys (mute, increase, decrease) buttons aren't working at all. Is there anyway I can get them to work?
View 3 Replies
View Related
May 9, 2011
so i don't know what happened, but all multimedia files are suddenly speed up/and-or with no sound (ubuntu 11.04 with all recent updates, firefox 4, adobe flash-instick etc.)
if i try to play a flash movie on for instance videos it's sped-up with no sound, if i play an mp3 song (i use exaile) the bar is sped up and there's no sound either, if i start an avi movie (vlc) it's not sped up but there's no sound though.
when i log in to the system the logging in jingle is not playing, so basically the sound just got turned off for some reason but according to the soundbar it should be on.
this problem started just recently. i don't know if it has to do with recent updates or that my log in re-started a couple of times after using a kde program (kmess).
View 4 Replies
View Related
Mar 16, 2010
Is there any multimedia file format converter which can convert .mov to .flv on Ubuntu.
View 2 Replies
View Related
Mar 19, 2010
Is there a way to allow the multimedia keys to function while the system is locked?
View 2 Replies
View Related
Apr 11, 2010
Install multimedia plugin for browsers *and* keep firefox removed, is possible have such simple thing?
View 1 Replies
View Related
May 10, 2010
I set up up Ubuntu 10.04 Lucid on my desktop. Why can I not install multimedia support for common formats following the guide here?
I've added the medibuntu repo. I'm up to the part where it says "UBUNTU FAMILY 8.10 AND HIGHER USERS ONLY" and i'm following directions for "32-Bit Ubuntu Users". This is what I get when I paste the command in terminal:
[Code]...
It says "0 upgraded, 0 newly installed, 0 to remove", why am I being told this? If this guide is not for Lucid than what guide is?
View 9 Replies
View Related
Nov 18, 2010
I've built a script that should meet the requirements to pass the MMCHECK script written by J. McDaniels and RedDwarf. Save anywhere, call anything, and then (must be run as root):
chmod +x <nameOfFile>
./<nameOfFile> setup|remove
Code:
#!/bin/bash
function addRepo() {
[Code]...
View 2 Replies
View Related
Jan 8, 2011
Recently I installed MPlayer with its default gui and its interfaces SMPlayer and GnomeMPlayer. When I'm using GnomeMPlayer it responds to multimedia keys as configured in Gnome shortcuts, even if it's minimized or running in another virtual desktop. But it doesn't happen to the other two gui's mentioned above. I have also noticed that native Gnome applications or with Gnome support like Banshee and Rhythmbox rspond to multimedia keys even when the gui is closed and they are running only in the system tray. But it never occurs in non-Gnome applications like VLC, MPlayer and others. Jetaudio wich responds to these keys in MS Windows running under Wine doesn't even recognize them.
So I came to the conclusion that only native Gnome applications or with Gnome support recognize multimedia keys because, as it seems, they receive the signal from Gnome configurations. Others applications doesn't do so. Here is my question: Is there some way to make all applications recognize the configuration of Gnome multimedia keys shortcuts? (Of course it would not be fine if they recognized ALL Gnome shortcuts because they could conflict with shortcuts from another applications. The idela would be that they recognize ONLY Gnome multimedia shortcuts.)
View 4 Replies
View Related
May 29, 2010
How to install Multimedia Codecs under Lenny with Gnome?
View 3 Replies
View Related
May 23, 2011
Using Debian stable. 64-Bit. I can play videos and music using Totem and VLC. And I can play audio files with audacious and Rhythmbox. And I can play flash in firefox and google-chrome. But, if I open audacious and then play a flash file in Firefox or google-chrome audacious crashes as well as other multimedia players that I have open such as Totem, VLC and/or Ryhthmbox.
Would like to know if you can offer some troubleshooting steps to take so that I can play a flash file in a browser and still play an mp3 file in the audio player without having to kill those processes and restart.
View 7 Replies
View Related
Jun 23, 2011
I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.
When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).
Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.
So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.
I think this might be due to a missing package or configuration but I have no idea where to look...
View 1 Replies
View Related
Apr 11, 2010
When trying to access "Multimedia" from System Settings, I get an error message as follows:
Code:
Cannot load library /usr/lib/kde4/kcm_phonon.so:(/usr/lib/kde4/kcm_phonon.so undefined symbol: _ZN6Phonon12GlobalConfig28setAudioCaptureDeviceListForENS_8CategoryE5QListiE)Cannot load library /usr/lib/kde4/kcm_phonon.so:(/usr/lib/kde4/kcm_phonon.so undefined symbol: _ZN6Phonon12GlobalConfig28setAudioCaptureDeviceListForENS_8CategoryE5QListiE)
Possible Reasons:
* An error occurred during your last KDE upgrade leaving an orphaned control module
* You have old third party modules lying around.
Check these points carefully and try to remove the module mentioned in the error message. If this fails, consider contacting your distributor or packager. And then when I click OK, it closes, and that's it. how to prevent this, so I can access the multimedia settings and change them. The reason I want to see the settings, is because Amarok 2.3 won't play any songs (even though version 1.4 still works).
View 2 Replies
View Related
Aug 9, 2011
Normally I find everything I need either in the documentation or forum, but it's been months, and this time I'm stumped. I'm posting the results of my latest tests, so I'm really sorry about the length of this post.
I can't play DVDs unless they've been burned by myself or a friend. I had no problems until around the beginning of April. I was running 11.2 on both my laptop and desktop. I think an update changed something. This was before 11.2 was officially retired a week or so later. I wanted to upgrade to 11.4 anyway, so I began with my laptop. During installation I wiped everything from my hard disk by creating new partitions and formatting them. After installation I installed the multimedia packages using one-click (opensuse-guide.org, not opensuse-community.org, although I did read what they said). I know one-click is not ideal, but I was curious. The result was that I still couldn't play DVDs.
I did a fresh installation, just to be on the safe side. This time I installed the packages according to Multi-media and Restricted Format Installation Guide by caf4926. But I still couldn't play DVDs, so I went through the thread Check your multimedia problem in ten steps. Then I ran mmcheck (v2.35). I tried a few times, experimented, and in the end did another fresh install.
In the meantime, on my desktop, which still has 11.2 on it, I found the file which had been changed and changed it back, so I could play DVDs on it again. It was in /etc/udev/rules.d/, 70-persistent-cd.rules. This does not appear to be the problem in 11.4 on my laptop.
I have again installed the packages according to the multimedia installation guide, and done the ten-step check and run mmcheck and these are the results as they stand:
I couldn't find a package called mplayerplug-in. I used zypper to look for it.
I tried installing the totem packages in a previous installation, but they didn't make a difference, so I left them out this time.
I deinstalled my jdk, but it doesn't seem to have made a difference, except that I get an error notification everytime I want to use LibreOffice. And I need it, so I'm putting it back soon.
So, these are my packages:
And this is what happens when I try to play a DVD using Kaffeine (since I don't an error message except from Kaffeine, and I've forgotten where my logs are):
And then comes Read error from: Error reading from DVD over the GUI.
And nothing else happens... I get no feedback from smplayer whatsoever. It opens, trys to read the DVD, and sits there. Even on the console.
View 4 Replies
View Related
Apr 13, 2010
I want to stream .avi *divx/xvid* (because of the nice compression and quality) online and have all streams accessible through a web based library type thing. Something like Jinzora ( http://en.jinzora.com/ ) is what I am looking for, but it's buggy. I would even be satisfied with a web based library of streams that you click and open with an external program. I have searched a lot for this and the only thing I found that can do this how I want (if it worked right) was jinzora. I don't want to convert to mpeg4 or flv because of size and quality issues.
View 5 Replies
View Related
Mar 15, 2011
I have Debian 6 installed. Is there a way for the web browsers (Iceweasel and Chromium) to recognize the multimedia plugins (gstreamer0.10) that were installed? about:plugins in the browser, references Gnash as the only plugin available.
View 7 Replies
View Related
