Ubuntu Multimedia :: Run With 3 Monitors On 2x8400gs?
Aug 11, 2010
Is it possible to run ubuntu with 3 monitors on 2x8400gs? What I have tried: Installed 10.04, enabled latest nvidia drivers. Enabled and arranged each monitor as a separate x window. However, when I did this configuration I couldn't move the programs from the (primary monitor) to the ones plugged to the other 8400gs. What I plan to use ubuntu for:
Mainly work in eclipse, firefox, and evolution. I have no interest in games since this machine is my workstation.
View 5 Replies
ADVERTISEMENT
Apr 12, 2010
I am running Ubuntu 9.10 on an HP laptop with an Intel 82852/82855 GM/GMC Graphics controller. I have a 2nd monitor attached to the VGA port (HP f1703). The problem is that the two screens have different resolutions. the laptop is 1280 x 768 and the other monitor is 1280 x 1024. The xorg.conf file that was created with Xorg -config set both monitors up with 1280 x 1024 resolution so my screen on the laptop looks all "squashed". I have tried to reconfigure it using the Display Preferences dialog but after i re-boot, both screens are unviewable and I have to restore my previous xorg.conf file. I went through the HOWTO: Jaunty Intel Graphics Performance Guide procedure to setup a "safe" configuration but didn't work and I had to restore my "good' xorg.conf file. What do I need to do to setup my two screens with the correct resolutions: 1280 x 768 and 1280 x 1024?
Here is the video portion from my "good" xorg.conf file
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
[Code]...
View 1 Replies
View Related
Jul 22, 2011
I'm not new to this distro or the forum I only decided to register today seeing as I actually do have a problem and need help because I can't work it out myself. I'm currently trying to get my 3-monitor set-up to work with Natty but I just can't get it to work. I can get 2 of my monitors to work fine in twin-view, and I can move windows between them, but I want to be able to move windows between all three of them. Now, I've tried many different configurations, I've tried making them all Seperate X's, but that didn't work as only two of them turned on and it was like Xorg crashed because Ubuntu would login, but nothing would come up after that it was just like the default Ubuntu wallpaper with no launcher, or desktop or even management. I tried ctrl+alt+f2 to try bring up terminal but that never worked either. i then tried using 2 monitors in twin-view and 1 as a seperate X, but that didn't work either as the same problem happened when I made them seperate X's.
[Code]...
View 7 Replies
View Related
Sep 18, 2010
I know it can be done, I just need to know what the hardware is called. There is a community center in the area and I might have a chance to help out. Due to not enough funding the center was only able to get One PC and five monitors. What I hope to be able to do ( and know its possible ) is get the hardware to make each monitor is own terminal with keyboard and mouse.
View 2 Replies
View Related
Jul 6, 2010
I want my video card to stop processing an image to my integrated monitor and only process images to my external monitor.
My problem is that I use my Toshiba Satellite M65 (which is a laptop) as a desktop: I use an external monitor, external keyboard, and of course an external mouse. I only recently started using Ubuntu after many years of Windows XP and I just realized that both my laptop's integrated monitor and my external monitor are 'on', displaying the same image. I want my video card to stop processing an image to my integrated monitor.
View 1 Replies
View Related
Aug 6, 2010
I have a 64-bit four monitors linux machine. I was wondering if there's a way to log into it using a Windows machine and be able to see all four monitors instead of just the primary?
View 2 Replies
View Related
Apr 11, 2011
I just built a system with an Nvidia GT240 and Ubuntu 10.10. I have two monitors and am trying to get them set up. I currently have them working fine in twin view but I'd like to have set up as separate X screens. However, whenever I do that X crashes. I've got the latest drivers set up from the x-sane PPA so I'm not sure what more I can do. My driver version is 270.29.
View 4 Replies
View Related
Jul 29, 2011
I am using Ubuntu 11.04 - the Natty Narwhal 64-bit and I am using the Nvidia Xserver version 173.14.30 and it never has any problems when I am in single monitor mode but when I turn on twinview mode like this----
and click apply the new monitor first shows up black and when I move my mouse over the monitor stuff starts showing up and I am able to click ok to keep my settings
when I click ok the screens freeze. everything else works; I can move the mouse around and if I am playing music it still plays but if I click on any button nothing happens and nothing happens when I use the keyboard either. I would really like to be able to use both my monitors
View 1 Replies
View Related
May 3, 2010
Just installed a clean version of 10.04 onto my Sony VAIO with an ATI Radeon Mobility x700 video card.Whilst using 9.10 KK I was getting low resolution but the dual monitors worked totally fine.Which I use to connect to my TV via a RGB/PC Cord.Since upgrading to 10.04 the resolution is awesome BUT when I merge both monitors the laptop goes mental and shows a white/whitish screen.If I use have both monitors side by side its OK but then I cant run xbmc to show movies. I'm stuck with making the TV my main monitor, which is a pain.Why is the laptop going white after merging screens? Does anybody have any ideas?
View 2 Replies
View Related
May 21, 2010
After working on trying to get my 3 monitors to work with Ubuntu 10.4 and my ATI Radeon HD3200 (IGP) and HD4850 cards, I just had to share the xorg.conf. I am using the default open source drivers that came with 10.4 and I kept KMS enabled (it wouldn't work without it).
Here is my conf:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "4850-2-Screen"
Screen 1 "4850-1-Screen" RightOf "4850-2-Screen"
Screen 2 "3200-Screen" RightOf "4850-1-Screen"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "on"
#OPtion "Clone" "off"
EndSection .....
View 9 Replies
View Related
Jul 31, 2010
I've HP DV 2000 laptop.
I'm trying to find out how to make my ubuntu to auto switch monitors when I connect my lcd into the vga plug and also switch the desktop bars into the new monitor and also use the laptop screen as a side screen.
In setting I can turn off my laptop screen and i'll see only on the lcd screen, but I need to configure it first, I want it to be automatically and when i plugged out the lcd it's back to normal.
View 2 Replies
View Related
Sep 26, 2010
Anyone want to take the time to help me get my ATI x16XX to work with dual monitors?I'm really tired and frustrated after upgrading to lucid and having the "vendor" drivers stop working.I can get a screen up, but cannot get the free driver to recognize the fact that I have two monitors.I tried renaming my xorg.conf and rebooting, but that caused my system to stop at startup.
View 4 Replies
View Related
Jan 22, 2011
I have two 1680x1050 monitors running from the same graphics card, using xinerama. The left hand one is rotated portrait, while the right hand one remains landscape.
Some flash videos will full screen fine (4od,iplayer,.....) but some will not; in the attached screenshot you can see that there is a small section of the screen displaying the video while the video controls are correctly at the bottom of the screen. The grey block on the right flashes rapidly light and dark.
Another issue I have is that flash will not stay full screen if I move focus to something on the other screen, is there a workaround for this?
View 1 Replies
View Related
Jan 24, 2011
My Kubuntu desktop uses 3x24" monitors running on two NVidia cards. I'm using Xinerama to make use of all 3 monitors in one giant desktop. Trouble is I really miss hardware acceleration which I had before with TwinView.
Is there *any* way to make Xinerama use the hardware like it's supposed to? The way it is, it makes the computer struggle; the i7 with 12 GBs of RAM runs like that 200Mhz MMX IBM Aptiva I had in 1995.
View 1 Replies
View Related
Jul 21, 2011
In 11.04 there seems to be several posts regarding dual monitors. When I tested 11.04 prior to making it my os Monitor Preferences detected both of my monitors, as did Nvidia Xserver.
So installed 11.04: After enabling my 2nd monitor using Twinview when I reloaded I get the following in the top right hand corner. (This ss was taken during some testing when I removed my 2nd monitor it shows 3600x1080 when both are plugged in) The Unity desktop or Classic will both load up and I can use the screens just fine. The problem is whenever I put games, or even a ..... video in full screen it breaks is the only way I can put it. I open up Monitor Preferences and it show Uknown Monitor with a resolution of 3600x1080. I can only assume that its trying to make the games etc use that resolution. Tested wow in wine and it shows that res even after I forced it to use my primary at 1920x1080.
I am new to Ubuntu so not sure if Twinview is working as intended but I am guessing not. As I have seen many other with Dual Monitor issues and not sure if this is the same thing. I have no problem using max for windows but anything Full Screen is where the issue is. I have tried setting the positions to "Left of" instead of absolute for the 2nd monitor but it changes back each reboot.
[Code]...
View 2 Replies
View Related
Mar 19, 2010
I'm using two monitors with an ATI Radeon X600 card in Ubuntu 9.10. I got the duel monitors to work by running sudo Xorg -configure, but now my desktop effects don't work. How can I get them to work again?
View 6 Replies
View Related
Jun 3, 2010
I've just upgraded to 10.04 and even if I am able to use my two displays with my Nvidia GPU, it bugs me that I can't use basic transparency controls on my desktop (compositing in Xfce). I've searched all over google and most links say it's impossible to mix Xinerama with Compositing, while others suggest using the old Xgl implementation will do the trick. I've also read things about Xrandr and that it might be a substitute for Xinerama, but it seems Nvidia drivers doesn't support it.
So, basically, I am at the end of my wits and I wanted to ask (shout?) if anyone managed to: 1. use two displays as part of the same desktop AND use compositing (window transparency) 2. or hack the compositing feature to work with some sort of software acceleration instead of hardware acceleration
Google lists all sorts of solutions, but none conclusive. So, is there a way out of this problem, maybe by using nouveau, or Xrandr, or something else entirely?
View 9 Replies
View Related
Jun 9, 2010
I had a working 10.04 installation and everything was good, then i compiled my own kernel and screwed things up. So I reinstalled and installed my graphics drivers. But Ubuntu can't seem to get my correct resolution. So I am stuck at 1360x768.
View 5 Replies
View Related
Dec 3, 2010
I'm using a NVIDIA 9600M GT on my laptop running Ubuntu 10.10. The laptop has a 16:10 display, I also connected my 16:9 LCD TV via HDMI. I would like to use them as clones. The problem is, as my TV has a different aspect ratio than my laptop display, the image does not fully fit on the TV. For example, when using a resolution of 1280x800 (16:10), one tenth of the width of that image is missing on my TV, as it has an aspect ratio of 16:9.
In Windows, the NVIDIA software stretches the image so that it appears a little distorted on my TV, but at least I see everything. Is it possible to do that in Ubuntu?
View 1 Replies
View Related
Jan 3, 2011
I'm building a new Ubuntu system for use as a desktop machine and personal server (http, smb, smtp). It'll be based on an Intel i7 950 and a Gigabyte X58A-UD3R LGA 1366 ATX Motherboard.
I'm looking for recommendations for a graphics card that will support dual monitors and runs well under Ubuntu. Would like some decent 3D support.
View 3 Replies
View Related
Jan 25, 2011
I'm currently running 10.10 64-bit version, with the current Nvidia driver installed for my 9600GT graphics card (2x DVI-out). With the card, I am running one VGA monitor and one HDMI TV (both using adaptors). I am running the screens in TwinView, using X Server Settings. My problem is, with the resolution available for my HDTV. In both Windows (XP and 7) and Ubuntu, the current Nvidia drivers all report the native resolution as 1920x1080, this however, is incorrect; the reported native resolution of the TV (according to the manufacturer) is 1280x720; but even set to that, there are still a few pixels missing outside of the screen.
In Windows, the Nvidia Control Panel lets me manually resize the desktop area on the HDTV, to a slightly smaller resolution than 1280x720, so that all pixels are within the viewing area. Is there anyway to do this with Ubuntu, using the current Nvidia driver? I cannot seem to find a way, using Nvidia X Server Settings.
View 3 Replies
View Related
Aug 16, 2011
I'm about to start a new build for my primary machine at home. The plan is to load up a server/workstation motherboard (ASUS KGPE-D16) with two 8-core chip, as much RAM as it will take (32GB) and to put two graphics cards in it. One to power my main 24" monitor (ideally via HDMI) and the other card to power two screens, one 24" on each left and right side via DVI (unless I can find a dual-HDMI card that meets my needs).
Does that make sense? Here's my question for this awesome group of intelligent individuals: What video card model should I choose? Obviously, I'd like them to match so I can SLI / CrossFire if I really want to, but what setup should I plan on to have a good experience managing multiple displays on multiple video cards?
Oh, and budget is probably up to about $300 per card, maybe a little more if it makes a lot of sense.I'm not alone in having tons of problems with trying to get multi monitor support in the last few versions of Ubuntu, and honestly it's the only reason why I'm still running Windows7: the multi monitor support is just SO DAMNED easy! I shouldn't have to spend this much energy thinking about video card model- it should just work, shouldn't it?
View 4 Replies
View Related
Apr 17, 2016
I have the following situation:
- Intel HD 4600 and 2 Full-HD monitors (Dell IPS, same model)
- left DisplayPort, right DVI
- Debian stretch with Linux 4.4.0-1-amd64
- XServer X11R7.7 and Cinnamon 2.8.7
… and the following problem:
When I restart the system or login after Standby, usually (not always, but often) some strange green and red pixels appear on the monitor which is connected via DVI. I can remove them by changing the display settings and restoring the extended mode again. However, most of the time the XServer crashes by trying to enable or restore the dual monitor mode (although I’m still able to start a new instance of X from another tty). The XServer also crashes every time I try to enable the extended mode from another situation.
I’ve already tried the following:
- connecting both monitors via DP (no pixes, but also crashes)
- swapping the monitors and using different cables, assuming a hardware problem first (no change)
- VGA instead DVI (works, but inelegant).
- blacklisting i915 or using the xforcevesa boot option (neither of them works, i915 starts though)
- using the nomodeset boot option (detects only one monitor and produces a fallback in software rendering mode)
View 0 Replies
View Related
Jan 7, 2010
I am running 9.10 on a laptop with an external monitor. when i run a flash video in full screen on the external monitor and click anything on the workspace of the laptop screen, the flash video on the external monitor will revert back from full screen.
this did not happen a couple of weeks back. i have not used it for 3 weeks. maybe one of the updates in between changed some setting?
does anyone now how to fix the problem?
View 3 Replies
View Related
Mar 9, 2010
I have searched the web read every post and still i cant seem to get dual monitors working correctly. I have a notebook and a extra external screen at home. Here is my issues
1) My Desktop background stretches over both screens.
2) My Display seems to think I have dual monitors attached permanently.
3) fn + F4 only blacks out screen for a few second.
get this sorted so that when I plug-in the external monitor it works and when I unplug and reboot it goes back to one screen
[Code]...
View 1 Replies
View Related
Dec 17, 2010
I am trying to setup Dual monitors with individual (non-mirrored) desktops. AMDCCCLE will only identify the monitor I want to use as primary as number 2 and the monitor I want to use as secondary as number 1 - I have tasksbars, awm, desktop items configured to use the first screen and the second screen is clear for media use. The choice seems to be determined by what output port on my graphic card.. whatever monitor is attached to the HDMI port is called 1. xrandr can only identify the 2nd monitor - the first monitor is unknown I've attached my xorg.conf
View 9 Replies
View Related
Jan 31, 2011
I'm busy building a machine now and I'm looking to set up dual monitors because it's something I've always fancied but never had the resources to do. I'm basically looking for advice on choosing a graphics card that will support dual monitors with good driver support under Ubuntu. After a few hours of browsing the forums I determined nVidia were the way to go but I'm honestly not bothered if people want to suggest ATI. I'm not a gamer so really only need the card to support dual monitors. I'll also need to know how to set up the card under Ubuntu and then subsequently how to edit xorg.conf in order to get the dual monitors working.
View 6 Replies
View Related
Feb 15, 2011
I have a problem finding the resolution that will fit my secondary monitor(24). If I check "Same image in all monitors" I can only choose resolutions that laptop can display. I don't want laptop monitor to work when I'm using secondary monitor(I close the lid)...
If I want to uncheck "Same image in all monitors"(just to find the right resolution)...the system tells me to log out and back in again. When I do that, there's the same image on both monitors and the checkbox was automatically checked again...
I have an Asus N71J Series laptop. Video card: ATI Mobility Radeon HD 5730 1GB
View 2 Replies
View Related
Feb 26, 2015
I am pretty new to using Linux, I am currently trying to configure 3 monitor's with Xorg in Debian Wheezy. I have 2 video cards in the PC and one has a Dell Y-splitter to connect 2 monitors. 2 monitors are 1920x1080 resolution and the other is 1280x1024.
LSPCI
Code: Select all00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
[Code] ....
I attempted to write my own xorg.conf file, but that resulted in the machine booting to single user mode and the xorg startx error log said it could not find any devices.
When I used the xorg.conf.new generated by the "xorg -configure" command, I was able to get it to display as 3 independent screens, but there was overlap on the screens. I.E. if you moved the mouse to the right side of one monitor, it would show on the left side of another screen at the same time.
automatically generated xorg.conf:
Code: Select allSection "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
[Code] ....
View 0 Replies
View Related
Apr 30, 2015
I inserted another graphics card to my computer to use 3 monitors. The card appears in lspci but I can't access it in gnome.
What do I have to do to set this up.
Here is the output of my xorg.log: [URL].....
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 XT/X1650 GTO]
View 7 Replies
View Related
