Ubuntu Multimedia :: Custom Resolution With Dual Monitors In X Server?

Jan 25, 2011

I'm currently running 10.10 64-bit version, with the current Nvidia driver installed for my 9600GT graphics card (2x DVI-out). With the card, I am running one VGA monitor and one HDMI TV (both using adaptors). I am running the screens in TwinView, using X Server Settings. My problem is, with the resolution available for my HDTV. In both Windows (XP and 7) and Ubuntu, the current Nvidia drivers all report the native resolution as 1920x1080, this however, is incorrect; the reported native resolution of the TV (according to the manufacturer) is 1280x720; but even set to that, there are still a few pixels missing outside of the screen.

In Windows, the Nvidia Control Panel lets me manually resize the desktop area on the HDTV, to a slightly smaller resolution than 1280x720, so that all pixels are within the viewing area. Is there anyway to do this with Ubuntu, using the current Nvidia driver? I cannot seem to find a way, using Nvidia X Server Settings.

View 3 Replies


ADVERTISEMENT

Ubuntu :: Dual Monitors Cloned To A Different Resolution?

Aug 18, 2010

I've been searching around and from what I've found this is supposed to just work but I am having some display issues when cloning my laptop to an external monitor. I think the problem is that my laptop has a better resolution than the monitor. Here is my setup:

laptop with a display of 1900x1200
external monitor with a display of 1680x1050

ideally I want to clone the laptops output onto the external monitor so they can both operate in their native resolution. When I setup twinview and set it to clone the laptop displays correctly, however, the external monitor is missing a large chunk on the bottom and right hand side

here's my xorg.conf

Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0

[Code].....

View 1 Replies View Related

Ubuntu :: Dual Monitors In Ubuntu With Diff Resolution?

Aug 9, 2011

I am trying to set up dual monitors in Ubuntu, with the two monitors having different resolutions. One monitor is on my laptop and the other is an external monitor. I have seen a number of threads detailing this.

1. Talks about editing xorg.conf.- The problem here is that i don't seem to have an xorg.conf file in /usr/share/X11. When i

Quote:
locate xorg.conf
in the terminal i get:
Quote:/usr/share/X11/xorg.conf.d
/usr/share/X11/xorg.conf.d/10-evdev.conf
/usr/share/X11/xorg.conf.d/11-evdev-quirks.conf

[Code]...

2. Talks about editing xrandr, linking to this page [URL]..This looks incredibly intimidating and i can't really work out what to do in my case.

3. Try changing resolution on one of the monitors in ~/.config/monitors.xml, which is where i got the unity dock to only show on the primary monitor. - Here, after i saved and logged out and in, i got an error msg saying the the resolution wouldn't work. When i looked at ~/.config/monitors.xml, the resolutions had reverted back to what they were originally.

4. I have tried 'configure display settings' in 'monitor preferences'. Here i can change the resolution of each monitor quite easily. This works and the resolution is perfect. The problem though is once i have done this monitor on my laptop - the one with the higher resolution - behaves really strangely. When i close things they don't disappear off the screen, the unity dock smears on the screen when it minimizes and mouse pointer labels show up and then don't disappear.

View 1 Replies View Related

Ubuntu Multimedia :: Turning Off Dual Monitors?

Jul 6, 2010

I want my video card to stop processing an image to my integrated monitor and only process images to my external monitor.

My problem is that I use my Toshiba Satellite M65 (which is a laptop) as a desktop: I use an external monitor, external keyboard, and of course an external mouse. I only recently started using Ubuntu after many years of Windows XP and I just realized that both my laptop's integrated monitor and my external monitor are 'on', displaying the same image. I want my video card to stop processing an image to my integrated monitor.

View 1 Replies View Related

Ubuntu Multimedia :: 10.10 And Nvidia With Dual Monitors?

Apr 11, 2011

I just built a system with an Nvidia GT240 and Ubuntu 10.10. I have two monitors and am trying to get them set up. I currently have them working fine in twin view but I'd like to have set up as separate X screens. However, whenever I do that X crashes. I've got the latest drivers set up from the x-sane PPA so I'm not sure what more I can do. My driver version is 270.29.

View 4 Replies View Related

Ubuntu Multimedia :: Freezes When In Dual Monitors?

Jul 29, 2011

I am using Ubuntu 11.04 - the Natty Narwhal 64-bit and I am using the Nvidia Xserver version 173.14.30 and it never has any problems when I am in single monitor mode but when I turn on twinview mode like this----

and click apply the new monitor first shows up black and when I move my mouse over the monitor stuff starts showing up and I am able to click ok to keep my settings
when I click ok the screens freeze. everything else works; I can move the mouse around and if I am playing music it still plays but if I click on any button nothing happens and nothing happens when I use the keyboard either. I would really like to be able to use both my monitors

View 1 Replies View Related

Ubuntu Multimedia :: Dual Monitors Laptop Goes White

May 3, 2010

Just installed a clean version of 10.04 onto my Sony VAIO with an ATI Radeon Mobility x700 video card.Whilst using 9.10 KK I was getting low resolution but the dual monitors worked totally fine.Which I use to connect to my TV via a RGB/PC Cord.Since upgrading to 10.04 the resolution is awesome BUT when I merge both monitors the laptop goes mental and shows a white/whitish screen.If I use have both monitors side by side its OK but then I cant run xbmc to show movies. I'm stuck with making the TV my main monitor, which is a pain.Why is the laptop going white after merging screens? Does anybody have any ideas?

View 2 Replies View Related

Ubuntu Multimedia :: Get ATI X16XX To Work With Dual Monitors?

Sep 26, 2010

Anyone want to take the time to help me get my ATI x16XX to work with dual monitors?I'm really tired and frustrated after upgrading to lucid and having the "vendor" drivers stop working.I can get a screen up, but cannot get the free driver to recognize the fact that I have two monitors.I tried renaming my xorg.conf and rebooting, but that caused my system to stop at startup.

View 4 Replies View Related

Ubuntu Multimedia :: [Monitors] Dual Showing As One 3600x1080?

Jul 21, 2011

In 11.04 there seems to be several posts regarding dual monitors. When I tested 11.04 prior to making it my os Monitor Preferences detected both of my monitors, as did Nvidia Xserver.

So installed 11.04: After enabling my 2nd monitor using Twinview when I reloaded I get the following in the top right hand corner. (This ss was taken during some testing when I removed my 2nd monitor it shows 3600x1080 when both are plugged in) The Unity desktop or Classic will both load up and I can use the screens just fine. The problem is whenever I put games, or even a ..... video in full screen it breaks is the only way I can put it. I open up Monitor Preferences and it show Uknown Monitor with a resolution of 3600x1080. I can only assume that its trying to make the games etc use that resolution. Tested wow in wine and it shows that res even after I forced it to use my primary at 1920x1080.

I am new to Ubuntu so not sure if Twinview is working as intended but I am guessing not. As I have seen many other with Dual Monitor issues and not sure if this is the same thing. I have no problem using max for windows but anything Full Screen is where the issue is. I have tried setting the positions to "Left of" instead of absolute for the 2nd monitor but it changes back each reboot.

[Code]...

View 2 Replies View Related

Debian Multimedia :: How To Permanently Set A Custom Resolution

Oct 23, 2015

I just installed Debian 8 (loving it so far) and everything its working right except for one thing: The monitor resolution!

I've got a LG 22 inch monitor and it supports up to 1360x768 but the display settings only shows 1024x768 as max resolution. Doing a little research i was able to get the desire resolution (1360x768) through the use of the tool "xrandr". The problem is that the resolution its not permanent and i need to invoke the xrandr script (i wrote a very basic "script" to set the resolution) on every restart or session logout and of course this is annoying. I've tried to use "crontab" to invoke the script on every restart but for some reason did not worked.

So, making more research i saw that apparently the correct way to set the resolution is by making use of "xorg.conf" but didn't quite get how to do....

Here's the xrandr script that i use:

Code: Select allOUTPUT=VGA1
MODE=1360x768
MODELINE=""1360x768"   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsyn$

xrandr --newmode $MODELINE
xrandr --addmode $OUTPUT $MODE
xrandr --output $OUTPUT --mode $MODE

View 4 Replies View Related

Ubuntu Multimedia :: Dual Monitors + Compositing - Any Success Stories?

Jun 3, 2010

I've just upgraded to 10.04 and even if I am able to use my two displays with my Nvidia GPU, it bugs me that I can't use basic transparency controls on my desktop (compositing in Xfce). I've searched all over google and most links say it's impossible to mix Xinerama with Compositing, while others suggest using the old Xgl implementation will do the trick. I've also read things about Xrandr and that it might be a substitute for Xinerama, but it seems Nvidia drivers doesn't support it.

So, basically, I am at the end of my wits and I wanted to ask (shout?) if anyone managed to: 1. use two displays as part of the same desktop AND use compositing (window transparency) 2. or hack the compositing feature to work with some sort of software acceleration instead of hardware acceleration

Google lists all sorts of solutions, but none conclusive. So, is there a way out of this problem, maybe by using nouveau, or Xrandr, or something else entirely?

View 9 Replies View Related

Ubuntu Multimedia :: Graphics Card Recommendation For Dual Monitors

Jan 3, 2011

I'm building a new Ubuntu system for use as a desktop machine and personal server (http, smb, smtp). It'll be based on an Intel i7 950 and a Gigabyte X58A-UD3R LGA 1366 ATX Motherboard.

I'm looking for recommendations for a graphics card that will support dual monitors and runs well under Ubuntu. Would like some decent 3D support.

View 3 Replies View Related

Ubuntu Multimedia :: Keep Flash Videos In Full Screen On Dual Monitors?

Jan 7, 2010

I am running 9.10 on a laptop with an external monitor. when i run a flash video in full screen on the external monitor and click anything on the workspace of the laptop screen, the flash video on the external monitor will revert back from full screen.

this did not happen a couple of weeks back. i have not used it for 3 weeks. maybe one of the updates in between changed some setting?

does anyone now how to fix the problem?

View 3 Replies View Related

Ubuntu Multimedia :: HP Elitebook 8730w Dual Monitors Fn Keys Not Working

Mar 9, 2010

I have searched the web read every post and still i cant seem to get dual monitors working correctly. I have a notebook and a extra external screen at home. Here is my issues

1) My Desktop background stretches over both screens.
2) My Display seems to think I have dual monitors attached permanently.
3) fn + F4 only blacks out screen for a few second.

get this sorted so that when I plug-in the external monitor it works and when I unplug and reboot it goes back to one screen

[Code]...

View 1 Replies View Related

Ubuntu Multimedia :: Setup Dual Monitors With Individual (non-mirrored) Desktops

Dec 17, 2010

I am trying to setup Dual monitors with individual (non-mirrored) desktops. AMDCCCLE will only identify the monitor I want to use as primary as number 2 and the monitor I want to use as secondary as number 1 - I have tasksbars, awm, desktop items configured to use the first screen and the second screen is clear for media use. The choice seems to be determined by what output port on my graphic card.. whatever monitor is attached to the HDMI port is called 1. xrandr can only identify the 2nd monitor - the first monitor is unknown I've attached my xorg.conf

View 9 Replies View Related

Ubuntu Multimedia :: Supported Graphics Card For Dual Monitors Setup

Jan 31, 2011

I'm busy building a machine now and I'm looking to set up dual monitors because it's something I've always fancied but never had the resources to do. I'm basically looking for advice on choosing a graphics card that will support dual monitors with good driver support under Ubuntu. After a few hours of browsing the forums I determined nVidia were the way to go but I'm honestly not bothered if people want to suggest ATI. I'm not a gamer so really only need the card to support dual monitors. I'll also need to know how to set up the card under Ubuntu and then subsequently how to edit xorg.conf in order to get the dual monitors working.

View 6 Replies View Related

Ubuntu Multimedia :: Dual Monitor - Same Image On Both Monitors Stays Checked ?

Feb 15, 2011

I have a problem finding the resolution that will fit my secondary monitor(24). If I check "Same image in all monitors" I can only choose resolutions that laptop can display. I don't want laptop monitor to work when I'm using secondary monitor(I close the lid)...

If I want to uncheck "Same image in all monitors"(just to find the right resolution)...the system tells me to log out and back in again. When I do that, there's the same image on both monitors and the checkbox was automatically checked again...

I have an Asus N71J Series laptop. Video card: ATI Mobility Radeon HD 5730 1GB

View 2 Replies View Related

Ubuntu Multimedia :: New Install Killed Dual Monitors - Nvidia Setup Not Working ?

Sep 14, 2010

I've just installed 10.04 on an old system.

Hardware is:

- NVIDIA GeForce 6600 GT video card
- Gigabyte EP35C-DS3R motherboard with 3 gig ram, few TB of hard-drive
- dual monitors, both viewsonic vx2235wm, primary on analog, secondary on digital (but whatever, happy to reverse the order)

On the old setup (8.04) the monitors were set up as twinview, 1680x1050 each, no problems. On the new setup (10.04) my old xorg.conf (see below) doesn't work and nvidia xserver settings refuses to detect my second (digital) monitor at any resolution greater than 640x480.

I've tried messing with xorg.conf to no avail and google doesn't appear to be my friend.

Here's the old xorg.conf file that worked in 8.04 but refuses to even boot under 10.04:

Code:

View 1 Replies View Related

Ubuntu :: Dual Monitors Nvidia X Server Doesn't Save After Restart

May 11, 2010

I have dual monitors running successfully with my BFG GeForce 8400GS and NVIDIA X server settings. The only problem is every time I restart, the settings go back to default, so I have to setup the dual monitors again.

View 5 Replies View Related

Ubuntu :: Dual Login On Dual Monitors?

Jul 1, 2011

I want to be able to login on different users on my two screens. Is that possible? It would be nice if I could have the left screen and my gf could have the right. I'm using ubuntu 10.04 with gnome, and I have a Nvidia graphics card.

View 8 Replies View Related

Ubuntu Multimedia :: Xorg.conf Setting Up Native Resolution 1900x1200 & Dual Monitor

Jun 19, 2011

my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080

After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.

my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:

Code:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Configured Monitor"
VendorName "Unknown"

[Code].....

View 9 Replies View Related

Ubuntu :: Set Up Dual Monitors?

May 28, 2010

I have a Dell inspiron 1525 laptop with a 1280x800 display and an external 1280x1024 monitor. I'm using 9.04 with openbox. I've done a loooot of online reading about how to get a dual monitor setup using xrandr, and I really don't know what I'm missing here. So here's the deal: I want to have my external monitor on the left of the laptop's display, and of course I want each of them to display different parts of the desktop.

First I set up the right resolution to each one of them (I do it using lxrandr). Typing xrandr -q in a terminal, I get the following:

[Code]...

View 9 Replies View Related

Ubuntu :: Can't Get Dual Monitors

Apr 21, 2011

I have an asus p5kpl-cm MB. I plugged in a radeon 9200 pci card. In the bios, I can set up:

pci/igd
igd/pci
igd

etc.

This determines which of the 2 displays (pci card or internal graphics on the MB) is the boot display. That determines which comes up with the bios screen and then once booted into ubuntu (10.04), this is the only adapter/monitor seen. The button detect monitors doesn't do anything.

lspci sees both my internal and pci card graphics. So, I can get either to work just fine (auto detected etc.) just not both at the same time.

I've tried all of the 3 above settings, and even when I set it to just igd, lspci still sees both my adapters. It identifies them correctly, and it works perfectly, detecting the monitor and knows the resolutions for each - just not both at the same time.

Does ubuntu know how to automatically configure more than one display w/o doing something else, or must I do something else to get both going together?

Code:
$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)

[Code]....

View 6 Replies View Related

General :: Increase Text Size In 10.04 Due To Having Large Resolution/monitors?

Apr 3, 2010

I have 24" dual monitors with 1920x1080 resolution on both of them. Consequently the text appears so small. I use the following text-intensive applications frequently:

Web browser (Google Chrome)
IDE (Komodo)
Terminal (Gnome Terminal)
Email (Thunderbird)

I can configure text size on IDE, Terminal and Email. But for Chrome, it is not a good idea to set proportional font size because often one wants to see the entire (not just proportional fonts) site to be zoomed. So I am asking: Is it possible to increase DPI in Ubuntu (much like on Windows) so as to increase the text size across all apps? OR Is it possible to set permanent 'zoom' in Google Chrome, using a third-party extension maybe?

View 1 Replies View Related

Ubuntu :: Cannot Use A Dual-monitors Correctly

Mar 1, 2010

I'm having trouble setting up dual monitors on my HP Pavilion dv7-1020us laptop, with an Nvidia 9600M GT graphics card, and Ubuntu 9.10. I installed Ubuntu via Wubi, on top of Windows 7. I tried this before on the same laptop when I was using Vista and Wubi, and Ubuntu was able to recognize my Graphics card, and install a proprietary driver. I wasn't able to test dual monitors, though. However, now that I'm using W7 and Ubuntu, it cannot use a dual-monitors correctly. It recognizes the monitor, but it only displays a mirror display of my Laptop monitor, not acting as a separate monitor, like I want it to. I tried messing around with the settings in the display menu, but nothing works. I tried downloading linux drivers for my card from Nvidia's site, but the file is in a .run extension, which I don't know how to install. What should I do to get this working?

View 7 Replies View Related

Ubuntu :: Ati Dual Monitors On 10.04 Gnome?

May 4, 2010

I have a ATI VisionTek 9250 128mb DMS59 PCI video card that I would like to use for dual monitors on Ubuntu 10.04 Gnome. I installed the card and booted the live cd. Both monitors are recognized when I go to the display settings, but when I un-check the mirror box, nothing changes. I am still only getting one monitor. I was previously using 9.10 and it sometimes worked, but not always.

View 5 Replies View Related

Ubuntu :: 10.10 Support Dual Monitors?

Oct 23, 2010

I just downloaded Ubuntu 10.10 and installed it today. I was just wondering, does Ubuntu support dual monitors? I tried looking through the settings in Ubuntu but I couldnt figure it out.

View 1 Replies View Related

Ubuntu :: X11 Configuration For Dual Monitors?

Nov 1, 2010

I have a brand new installation of Ubuntu 10.10. I'm using a GeForce 8600GT graphics chipset. I have two monitors, and my goal here is to have them both working under Ubuntu in their full resolutions, and I've not had any luck with this yet. I've got a Viewsonic VE155s with a native resolution of 1024x768, and a Chimei CMV 221D with a native resolution of 1680x1050. When I first installed Ubuntu, both monitors were working, and the VE155s was working in its native resolution of 1024x768, but the CMV221D was stuck in 640x480.

The Nvidia video configuration utility was not identifying the latter monitor - it only reported it as DFP-0, and doesn't allow any resolution above 640x480 to be set. The mechanism (which has a name which I don't recall) which allows the OS to interrogate the monitor's firmware to find out the monitor manufacturer, model and accepted resolutions and frequencies to use does not seem to have worked. (I previously had the Nvidia driver installed, but I've since switched back to the default open source vesa driver. I won't use the closed Nvidia driver if I don't need to, but if I need to use it to get acceptable performance from this hardware than I will.)

So I did a little bit of reading and I did some hacking of xorg.conf. Previously I had the 15" monitor working in 1024x768 and the 22"
monitor working in 640x480. Now I've got the 22" monitor working in 1680x1050 as desired, and the 15" monitor not working at all. Here's a copy of my xorg.conf. For the sake of brevity I have not included the unnecessary bits such as input devices.

Code:

Section "Device"
Identifier "NVidia"
#Driver "nvidia"

[code]...

View 1 Replies View Related

Ubuntu :: Trying To Set Up Dual Monitors With Nvidia

Jan 24, 2011

I'm trying to set up my monitor and tv for dual display but I'm having some problems. I want them to display the same thing so I've enabled twinview and I figured the second display position should be set as clone but when I save xorg and restart the x server the position reverts to absolute. Anyway, the monitor is set as the primary display and it's the one I'm having problems with. The tv is fine but the monitor's display is stretched off the screen so I can't see the far right or bottom of the screen. I'm very new to linux and I'm just finding my feet so if there's any other info needed you'll probably have to be very specific.

View 2 Replies View Related

Ubuntu :: How To Setup Dual Monitors

Mar 23, 2011

The problem is that I don't have NVIDIA graphics card These are my HP ProBook 4510s Laptop's specification: [URL] And I think my built-in graphics card is Mobile Intel� 4500MHD Did anyone Dual Monitor with this Laptop or knows how to Dual Monitor with it?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved