Ubuntu Multimedia :: Playing / Ripping Dvds In 10.04?
Oct 21, 2010I have followed step by step instructions from different support forums and have not had any luck being able to watch or rip dvds with any kind of encryption
View 2 RepliesI have followed step by step instructions from different support forums and have not had any luck being able to watch or rip dvds with any kind of encryption
View 2 RepliesWhat program do I use for this, and what format will it be in?
View 9 Replies View RelatedMy newly installed (but not new) DVD drive seems to play some movies some days, but others all the time. I'm pretty sure it's just a little picky about scratches. I can hear it in the drive; when I insert the disk, I can tell when it isn't spinning. When it does start spinning, that's when the Media options window pops up asking me what I want to do with the disk.
View 7 Replies View RelatedJust built a new mini-ITX system. Installed 10.04 x64 and then spiffed it up. Now to play DVDs, I followed instructions here: [URL]. Including the troubleshooting item about chmod / chgrp. I wasn't clear whether this would be saved across reboots. And rebooted.
Code:
xxx@atomic-breeze:~$ sudo chmod 660 /dev/sr0
xxx@atomic-breeze:~$ sudo chgrp cdrom /dev/sr0
xxx@atomic-breeze:~$
Unprotected DVDs play just fine. Protected ones give this error:
Why I can't play protected DVDs?
VLC used to work fine for me. I ran a DVD in Movie Player and somehow that seems to have broken VLC. Now neither of them work. Starting VLC in the terminal I get this error when trying to read a DVD: [URL]
View 6 Replies View RelatedI've got this weird problem where my DVDs - just standard netflix DVDs mostly - will stop playing about halfway through. At first I thought it was a problem with the disks, but it has happened far too often now, and I tested one of the disk and it played fine in Windows - though I had to sit through 20 minutes of unskippable ads to check.
I get exactly the same problem regardless of player; I usually use VLC, but VLC, MPlayer, and at least one other all stop in exactly the same place. There's no buffering or freezing or anything, it just stops as if it were the end of the disk, and it always stops at the same time on a disk (not always at the same time on different disks). I can't skip past that point, it's like there is nothing past that point.
After following instructions to install software to play encrypted DVDs and after rebooting, I tried to play a DVD in Totem. A driver was searched for by Totem; not found; DVD not played.
View 6 Replies View RelatedIs there anyway of playing the digital copies that come with bluray and dvds - these appear to be encrypted using DRM.
View 1 Replies View RelatedI'm new to posting around here, but have used this forum for years and always have found a solution via search, but this time I couldn't find anyone with quite the same problem.
I've been using 8.04 on an old laptop for quite a while and have been able to watch encrypted DVDs, as I have installed all the proper drivers.
But suddenly, every time I insert an encrypted DVD, it will mount and I can see the name of it and browse the files, but neither MPlayer nor VLC will play it.
I know the drive works, because if I boot into XP I can watch them there.
I already tried reinstalling the drivers and am out of ideas.
I have still not succeeded in getting my Region 2 DVDs to play in Ubuntu 10.04. I used something called Regionset to reset the player from zero to 2 for playback in the UK but although it is now set to Region 2 it will only play Region 0 DVDs. I have tried all sorts of tricks with codecs and installing VLC and (of course) Ubuntu Restricted Extras but no joy.
View 2 Replies View Relatedhow to play dvds and cds
View 1 Replies View RelatedUbunto is new to me when I try to play a movie I get the message, "no URI handler implemented for dvd".
View 1 Replies View RelatedI am relatively new to linux, but not to computers. I want to try out several different distributions and learn more about linux, but I read that some distributions will not play DVDs. Since my computer is my DVD player, I need this to be an option.
View 2 Replies View RelatedI recently installed fedora and enjoying learning what it can do. One of the things that I wanted to do was play DVDs. I installed vlc and the libvdreader package but am unable to play DVDs. I even used "movie player", and the program said, fedora does not have the right codecs to play the DVD. Does anybody know what I need to do? And what codecs that I need to download if any?
View 9 Replies View RelatedI have just installed SuSE 11.4 and find that xine and VLC cant play DVDs. xine reports:'input plugin cannot open MRL [dvd:/]' and then 'cannot find input plugin for MRL [dvd:/]'. Plainly I've either forgotten to install something, or somethings' permissions are wrong.
View 2 Replies View RelatedI've been doing some searching on the internet about how to rip my cd's to mp3 within ubuntu. I seem to find that LAME isn't a good way to convert the files. I saw the sticky within the forums and RubbyRipper is recommended, but the installation seemed a bit confusing to me. Everything else I found through my search was considerably old. I'm using Karmic Koala. Any suggestions? (This is also a sticking point for people I try to convince to switch over to ubuntu, btw.)
View 9 Replies View RelatedI travel a lot and I want to convert all my DVD's to avi format so that I can play them through my media player. K3b has an option for ripping DVD, but it doesn't seem to do anything!
View 7 Replies View RelatedI've got a bin/cue duo that contains 1 data track and some audio tracks I wish to rip. However, I can't get to the audio tracks. I've tried mounting the bin/cue with AcetoneISO, but it just shows me the data part. I've tried converting the files using
Code:
bchunk foo.bin foo.cue foo
and it converts to 2 files, an iso and a cdr. The .cdr file, as far as I can see, cannot be opened by anything. And so I turn to you, dear fellow Ubuntu-ers for assistance. How can I get to the audio files in the image and rip them?
I've been using the rubyripper gui on 10.04 for a while now, using my samsung se-so84 external dvd writer and I really like it. The problem is, I seem to have found that a small handful of my CDs will not rip at all. it says that it is ripping the first trial of the first track and never progresses past this. I check the files and the temporary .wav file. usually, when this file is created it is of size 44 bytes and increases to a number of MB in a matter of seconds. in the case of the albums that do not work, the file remains very small, all being 32KB, with the exception of one that is 64KB and another that remained 44 bytes. I check the log files and they all read:
Code:
STATUS
Starting to rip track 1, trial #1
Filesize is not correct! Trying another time
Starting to rip track 1, trial #1
However, this appears to be normal as I checked the log of an album that ripped correctly and it started with this.
So I tried using the command line mode and that didn't work either. the ouput was:
Code:
STATUS
Ripping progress (0 %)
Ripping track 1
Expected filesize for track 1 is 66389948 bytes.
and then it exits. in the directory, an empty temp folder has been created and the album's folder contains a log file that ends after STATUS. I tried using a CD that works on the gui and the command line did the same thing. could this be something to do with the incorrect filesize that the log showed for all CDs?
I'm a newbie to Suse and determined to stick with it.Mp3s play in amarok, option to rip cd to mp3s as well. However empty folder created with no MP3. I tried K3B and error re: need MP3 Mad MP3 library. I have read various forum posts and can't pinpoint where the issue arises.I have gone through steps on multimedia repos and restricted formats. I will submit details of my system shortly, but in meantime wonder if there is a simple solution I am missing not done.
View 9 Replies View RelatedI recorded many useful lectures this year. They are now on my HDD an with their 196Kb/s mp3 compression they take almost 30Gigs of space.good GUI Ubuntu 10.4 program for ripping them to smallest size possible (I don't care about quality - they are voice recordings) 8 Kb/s would be nice. But all programs I have tested since offer me only higher qualities.
View 5 Replies View RelatedSince 10.04, dvdrip will not finish ripping without crashing on multi episode disk. Reopened dvdrip to copy log files (below) and only part of log remains, but now transcode is available where before it was not. This dvd has 22 chaptors and it crashed at the end of 21. 22 came up on the progress bar but just stalled there.
[Code]....
I've just started to use Rythmbox, and as I was ripping CDs I noticed that the songs ripped as .ogg files by default. I use Rythmbox to sync with my iPod Classic (80 gig, if it matters), so I would prefer that the songs ripped in .mp3 or AAC. Is this possible without leaving Rythymbox? If not, what's the most user-friendly software available to rip CDs in .mp3 or AAC?
View 5 Replies View RelatedI've been ripping some of our CD's to .ogg and .mp3 for listening at work with a Sansa Fuze. Have used RubyRipper but lately been using Rhythmbox. The app finds titles online, and it's all pretty easy.
Some rips are louder or quieter and that's a little annoying. But the biggest problem is with tracks that blend together and the app can't figure out how to dissect them. The Eagles "Dalton" CD is a mess. Also some Don Henley tracks, Creedence Clearwater, Stone Temple Pilots, etc.
I could use RubyRipper to rip the entire CD as one file. Or use RubyRipper to rip just the troublesome tracks as one file. Or maybe screw around with the tracks in Audacity? Was hoping that some of you have better fixes.
There are a bunch of threads on this website about this subject. None of which offered a final solution.One spoke of burning the '.aa' file to a CD and them ripping it to remove the DRM.I got it burned to a CD. What applications under linux do I need to rip it. I've tried just about everything I can find in the repository and nothing worksquestion:Do we know what the DRM code looks like and where it existed in the file. Is it something that can be removed with a hexeditor?
View 2 Replies View Relatedis it possible to rip a Video DVD to hdd with a command line command ? Or with a bash script. What I want it to do is to rip the Video DVD as is in VIDEO_TS structure to the HDD. No encoding to other formats.
Can it be done ? And How ?
When i try to select a codec for ripping a dvd to in acidrip, there are no codecs in the menu that is meant to be there. I have tried reinstalling mencoder and acidrip but no luck. running lucid with latest updates.this has not worked since i first installed lucid. i also get this when i run mencoder.
MEncoder SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Team
Option of: Unknown suboption lavc
Warning unknown option of at line 9
Option format: unknown format name: 'mp4'
Error parsing option lavcopts=format=mp4 at line 10
Exiting... (config file error)
I recently finished ripping my CD collection. Some of the files don't play; VLC and other players can run them, but there's no sound. Running oggz-validate shows errors like this: granulepos 0 on page with no completed packets (I didn't know about oggz-validate when I was ripping, otherwise I'd have checked as I went.) I can't see a pattern: with some CDs it's the whole CD, with others, just some tracks.
I pretty much ran with the default abcde options. I upped the quality at one point, but dropped it back again. Before I replace the bad files, does anyone have any advice on what to do or avoid? I've tried googling the error, but haven't found anything useful.
When ripping a CD, Banshee produces two songs in my library for each track on the CD. Both songs point to the same file in my Music folder (so just one actual file). Also of note, one of the songs is always a few seconds shorter than the other. I can safely remove the shorter version of each song from my library without repercussions, it's just annoying and weird.
View 1 Replies View RelatedHas any resolution come from this? Can CDDB used instead?
View 1 Replies View Related