Which package needs to be added to play those heinous MP3 files in Kaffeine? Out of the box it gives this error:Cannot find demux plugin for MRL "file:///tmp/xxxxx.mp3".
View 4 RepliesAfter having installed Kaffeine on Ubuntu to use for watching Terrestrial Digital TV through my tv-tuner, on Lucid, Ubuntu 10.04.
After installing Kaffeine and the proprietary driver and firmware for the card, starting Kaffeine gave me the following error;
"kaffeine cannot find demux plugin for MRL"
I found this problem difficult to find a solution for; but did eventually find mention of a set of plugins which would provide what Kaffeine needs;
libxine1-all-plugins
This was originally mentioned at old nabble: [url]
I installed this, along with all the Medibuntu plugins (just to make sure) and my Kaffeine then worked without troubles.
Basically, I think if i'd originally installed according to the instructions found at the Kaffeine community website: [url] i'd have had no troubles. However, I must say I expected all dependencies to be met simply through the apt-get install process. Not so for the plugins of course, as I should have known.
After wrestling with Kaffeine on openSUSE 11.2, I thought I had solve the issue I had with it and I got a new error as described below:
Original Issue: Kaffeine will not play a dvd. Error: Cannot find input plugin for MRL
Then: error no longer appeared, but I got a new error.
New error: "Cannot find demux plugin for MRL "dvd:///dev/sr0""
Of course, I could install Demux, but what is this plugin business? Any ideas? Please, if possible include a little information about what MRL refers to.
I have OpenSuse 11.2
I can't play DVD.
I have get this error when I put a DVD: cannot find input plugin for MRL [dvd:/]
Error message: Cannot find MRL plugin for [dvd:/]
Trying to play dvd that worked under 11.1 and original dvd version of openSUSE 11.2. It failed after a update.
Not sure which one since I do not normally play dvd movies on my system.
Checked all multimedia rpms and they are all from packman except kaffeine which is KDE4 version.
I just updated my distribution to 11.3 from 11.2. But now this problem occurs when I try to play an mp3. There was no problem before with 11.2.
It also says
Code:
The following plugin is required : MPEG-4 AAC decoder
Only certain mp3s have this problem. All gstreamer packages have been installed. What package is missing anyway?
I had the above message when I first installed openSuse and tried to play DVDs. I tried googling the above message, thinking that I was missing some software. It turned out that the message simply meant that it couldn't find the dvd.
Messages such as:
Cannot find plugin for MRL [cdda:/]
Cannot find plugin for MRL [dvd:/]
Basically mean that SuSE is having problems finding a cd or dvd. This is most likely due to symbolic links for cdrom and/or dvd not being present.
I was having this problem on Kaffeine. Also having problems playing dvds on smplayer and VLC player.
I found the answer to the problem on the following thread (all credit to jdmcdaniel3 for the key initial post), which does a very thorough job of explaining about the 70-persistent-cd.rules file, where to find it, and what you can do with it.
Multimedia Optical Drive Naming (ie /dev/dvd & /dev/cdrom) Howto in opneSUSE - openSUSE Forums
The thread explains how to edit the 70-persistent-cd-rules file or, better, to create a copy called 90-persistent-cd.rules and edit that file to add symbolic link entries for cdrom and/or dvd if they are missing. Doing this it is possible for the cdrom and dvd symbolic links to point to the same physical drive or to different drives, depending on what you wish to do.
Kaffeine seems to expect to find things in cdrom and dvd. It will work once you have set up the symbolic links for these as described in the above post.
If you simply look at the 70-persistent-cd.rules file, you will see the symbolic links allocated to the cd/dvd drive(s) on your system. If you make a note of these symbolic link values you can use them to set the drive information in applications such as smplayer or VLC player :
VLC player - go into Media/Open Disc and set the drive accordingly, depending on whether you are playing a cd or dvd. Needs to be done each time you play a cd or dvd.
I think creating the 90-persistent-cd.rules file as mentioned above and adding the entry for cdrom and/or dvd may work for other cd/dvd playing software that expects to find these links, but I haven't tested running anything other than smplayer, VLC player and Kaffeine. These cover my requirements.
Following the above I am now able to play cds and dvds in my cd and dvd drive respectively.
I am currently running Lucid,and in every single attempt to play any mp3,it claims that it cannot find a suitable plugin,which is weird because I am nearly 100 percent certain that I did install all of the restricted extras.The funny part is that it is trying to install a Soundblaster Voc plugin?
View 3 Replies View RelatedI am trying ti instal adobe flash but I cannot find the file that the plugin folder is in. I am running open suse 11.4. Mozilla firefox beta 12. =
View 9 Replies View RelatedI've had CMUS installed for a while, and I haven't had any problems until today. After I initiate it, I'm given the error:
Code:
Error: selecting output plugin '': no such plugin
After some searching, I tried the "set output_plugin=" command with several arguments, but each time it tells me the same original error, only with 'oss' or 'alsa' instead of ''.
I also tried "cmus --plugins," and the only output plugin listed oss under output plugins. How do I configure CMUS so that it works?
While using Rhythmbox this morning, I was greeted by a blunt and undiscriptive error message:
Code:
Plugin Error:Unable to activate plugin Cover Art.Going to the plugin page, I was supprised to find that most of the installed plugins would not load. Without any info being offered in the player, I looked on line. Many people had problems with other plugins, and most of the time it was a problem with an uninstalled python package. But I checked on this site and I found that I had all of these packages installed. (Well, the python ones at least, to check all of them would take forever.)
Code:
[URL]
After finding no help there, I ran rhythmbox -d to debug:
Code:
(12:04:33) [0x934fe68] [rb_python_module_init] rb-python-module.c:406: Init of python module
(rhythmbox:4971): Rhythmbox-WARNING **: unable to load module as python runtime could not be initialized
[code]....
I wanted to give kupfer a try, though I had to build it from source as it doesn't appear to be in the repos. The building seemingly went fine and installed, but I get these error(s) when I try to run the program:
Code:
$ kupfer
Kupfer: A free software (GPLv3+) launcher
Copyright � 2007--2010 Ulrik Sverdrup with others
http://kaizer.se/wiki/kupfer/
Error [kupfer.plugin.websearch] OpenSearchSource: [Errno 2] No such file or directory: '/home/snakepc/.mozilla/firefox/z6orlu2l.default/searchplugins'
[Code]...
We make everyday a DB Mysql backup on Linux redhat Enterprise. We are using a bash shell script (and putting it in the crontab) to execute it automatically everyday. We added a line to this script telling, once the backup has completed, to find old backup files (stored on hard disk after each backup) older than x days to remove them. We use the find command (search for file type) with the mtime option and in combination with rm command. Everything runs ok but we also want to add some new code to the same line: If find command cannot find anything or fails, for example if it cannot delete file or fails, send the error message (standard error output) to an error file (like error000001 and increasing) and mail the errorxxxx file to an email address for example to admin@companyname.com. What would be the code for this issue to add it to our find command in the same bash shell script??
View 2 Replies View Relatedhow to rectify these errors..
RCC: Error in 'appchooser.qrc': Cannot find file 'accessories-dictionary.png'
RCC: Error in 'appchooser.qrc': Cannot find file 'akregator.png'
RCC: Error in 'appchooser.qrc': Cannot find file 'digikam.png'
RCC: Error in 'appchooser.qrc': Cannot find file 'k3b.png'
RCC: Warning: No resources in 'appchooser.qrc'.
and my .qrc file is like this
<!DOCTYPE RCC><RCC version="1.0">
<qresource>
<file>accessories-dictionary.png</file>
<file>akregator.png</file>
<file>digikam.png</file>
code....
I have just installed the newest version of ubuntu (10.10 the maverick meerkat) and im struggling installing any programs, wine and vlc arnt appearing on synaptic package manager and anything i try to do in either the command promt or ubuntu software centre doesnt work either. On the command promt when i follow the commands as seen on various tutourials the command promt comes back with an error. VLC example given below.
[Code]...
I have been comileing that kinect hack with the 3d video capture. i did everything, calibrated cameras and everything else but when i try to open the final program (KinectViewer) i get back this error: Caught exception Misc::File: Error opening file CameraCalibrationMatrices-B00363201643043B.dat in mode rb. From what ive gathered off the web it is not opening it because its in binaly mode or something to that affect. any tips to fix it? is there a way to change what mode im in?
View 2 Replies View RelatedI am trying to demux a set of VOB's from a DVD. I want to be able to extract any video/audio/subtitle/closed caption stream to a raw file. Then I want to wrap the streams that I want into an MKV file. (Probably the video, best quality audio, and all of the subtitles. But who knows, maybe all the streams...) To extract the mpeg2 video from the VOB (which I pulled off the DVD using vobcopy) I am trying to use this command:
Code:
$ ffmpeg -i VTS_01_1.VOB -an -sn -vcodec copy -f rawvideo output.mpeg
The problem is, that when I open output.mpeg in something like VLC, the subtitles are still there. I can turn them on/off, but I don't understand why they are there. FYI: if I do -f mpeg2video, I get the same exact output, checked with an md5sum.
Here is a sample output:
Code:
$ ffmpeg -i VTS_01_1.VOB -an -sn -vcodec copy -f rawvideo output.mpeg
FFmpeg version UNKNOWN, Copyright (c) 2000-2010 Fabrice Bellard, et al.
built on Jan 10 2010 17:47:18 with gcc 4.4.2 20091208 (prerelease)configuration: --prefix=/usr --enable-gpl --enable-libmp3lame --enable-libvorbis --enable-libfaac --enable-libfaad --enable-libxvid --enable-libx264 --enable-libtheora --enable-postproc --enable-shared --enable-pthreads --enable-x11grab --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-version3 --enable-nonfree
libavutil 50. 7. 0 / 50. 7. 0
libavcodec 52.45. 0 / 52.45. 0
libavformat 52.46. 0 / 52.46. 0
libavdevice 52. 2. 0 / 52. 2. 0
libswscale 0. 8. 0 / 0. 8. 0
libpostproc 51. 2. 0 / 51. 2. 0
[mpeg @ 0x824b390]max_analyze_duration reached
Input #0, mpeg, from 'VTS_01_1.VOB':
Duration: 00:22:22.22, start: 0.045500, bitrate: 6399 kb/s
Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], 7500 kb/s, 27.48 fps, 59.94 tbr, 90k tbn, 59.94 tbc
Stream #0.1[0x80]: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s
Stream #0.2[0x81]: Audio: ac3, 0 channels
Output #0, rawvideo, to 'output.mpeg':
Stream #0.0: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], q=2-31, 7500 kb/s, 90k tbn, 29.97 tbc
Stream mapping:
Stream #0.0 -> #0.0
Press [q] to stop encoding
frame=32731 fps=428 q=-1.0 Lsize= 878592kB time=1361.26 bitrate=5287.3kbits/s
video:878592kB audio:0kB global headers:0kB muxing overhead 0.000000%
I'm especially curious about that "max_analyze_duration reached" line.
Iv installed ubuntu 10.10 onto a usb 4gb pen. EVerything works fine. However I then wanted to encrypt the USB using truecrypt inside ubuntu and got an error message telling me it could not find some file. I then installed virtualbox onto the ubuntu this installed fine,i then installed windows xp and after completion clicked save the state. I then restarted ubuntu and when it loaded up again the virtualbox and windows xp had been deleted. Iv tried this twice just to make sure but same thing both times.
View 9 Replies View RelatedIt is a digital simulation program that works with QUCS which is anelectrical circuit simulator.I can compile it and install it using the normal:
./configure
make
sudo make install
[code]....
Ubuntu 9.10 64-bit
Lenovo T400
I'm trying to install gopenvpn from source. [URL] I'm pretty sure I have all the necessary libraries installed.
./configure ends with:
.
.
.
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pixmaps/Makefile
config.status: creating src/Makefile
config.status: error: cannot find input file: `po/Makefile.in.in'
I'd like to mount an iso file ,however, it failed as following: ljk@ljk-laptop:~/Test$ modinfo loop ERROR: modinfo: could not find module loop what I can do?
View 1 Replies View RelatedI'm having a problem installing Ubuntu using wubi. I get the error:
09-20 23:51 DEBUG TaskList: ## Running uncompress_target_dir...
09-20 23:51 ERROR WindowsBackend: [Errno 2] The system cannot find the file specified
and later on in the log:
[code]...
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code:
audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
I have registered 2 nameservers running bind for a certain domain. The log file of my domain name provider (SWITCH) shows the following warning:
Warning Der Name-Server ns.xxxxx.ch (nn.nn.nn.nn) beantwortet rekursive Anfragen.
In English that would be:
Warning: Name-Server ns.xxxxx.ch (nn.nn.nn.nn) answers recursive queries.
The NS triggering the warning is running openSUSE 10.2 and the other one 11.1. Both configuration files /etc/named.conf are equivalent (well, forwarders are different). There is no such warning for the NS with 11.1. When I add "recursion no;" to the options in /etc/named.conf the warning goes away, but FF or SeaMonkey running on the server no longer get their DNS requests resolved.
I have a transparent proxy Squid-3.0 on Slackware 12.2. I used cron to restart squid every day at 7:30 AM (just /path.to.squid/squid -k kill && /path.to.squid/squid) Some days ago I saw in /var/log/messages that Squid was killed but haven't started. I started it manually and everything was OK. But today everything repeated. And the log file is interesting. I tried to find about it on http://squid-cache.org/ but al in vain. This is from /var/log/messages :
Code:
May 24 07:30:02 konura squid[17188]: Squid Parent: child process 17199 exited due to signal 9
May 24 07:30:02 konura squid[19038]: Squid Parent: child process 19040 started
May 24 07:30:03 konura squid[19038]: Squid Parent: child process 19040 exited with status 1
May 24 07:30:06 konura squid[19038]: Squid Parent: child process 19045 started
[code]....
I need to say that I haven't edited the config file for a long time, but this problem started to happen. ADDED, Solved: I'm not sure, but maybe I found the decision. I deleted about 400 mb of Sarg logs from /var partition. And now squid runs well. Besides, before deleting old logs, 'crontab -e' and 'pkgtool' didn't work And the system wrote me that it's no space left on device. At the same time, 'df -h' showed me that all partitions had enough free space. Seems strange, but that's it. After deleting old proxy statistics, generated by Sarg (this is about 400 mb) 1)squid runs OK and 2)there are no more that annoying messages about abscence of free space.
I have a video that is currently in .mkv format, and I need it in .avi, however, when I attempt to convert it with MEncoder, it cannot find the video. (Please note this is my first attempt to convert anything with MEncoder, or convert any video on Linux). What I entered and my results are as follows -
mencoder Pocketful_Of_Rainbows.mkv -o Pocketful_Of_Rainbows.avi -ovc xvid -oac mp3lame
MEncoder SVN-r29237-4.4.1 (C) 2000-2009 MPlayer Team
File not found: 'Pocketful_Of_Rainbows.mkv'
[code].....
I am trying to install Ubunto 9.10 on my windows XP. I try to run it from the live cd. but every time i try to do this.. I get an error "Unable to find a medium containging live file system" I tried it from different cds too... so it's not an error in the cd.
View 2 Replies View RelatedI am trying to run i386 in gcc_test-suite using dejagnu runtest and it fails with error given below. I can see that gcc-dg.exp is in folder gcc-4.6-20100911/gcc/testsuite/lib, but runtest is not searching in this folder.
how to resolve this issue and run only i386 tests.
$ cd /gcc-4.6-20100911/gcc/testsuite/gcc.target
$ runtest -a -tool i386 -verbose
....
....
Looking for library file /usr/local/share/dejagnu/lib/gcc-dg.exp
[Code].....
find /var/spool/mqueue -group abc -exec rm -rf {} ;Using above command , I delete all the files belong to group abc.Now the problem i face is that the this command gives error that some files are missing . And this error occur because after creating list of files, it pass that list to rm -rf but till that time sendmail process queue and some of files disapper from /var/spool/mqueue.
View 5 Replies View RelatedI need to know a command that is able find the hight and width of a video. I know in VLC you can go into the Codec details but I need something in the command line because I have hundreds of files that I need to organize. I could not find any VLC command that does what I want to do.
View 2 Replies View Related