Error message: Cannot find MRL plugin for [dvd:/]
Trying to play dvd that worked under 11.1 and original dvd version of openSUSE 11.2. It failed after a update.
Not sure which one since I do not normally play dvd movies on my system.
Checked all multimedia rpms and they are all from packman except kaffeine which is KDE4 version.
I have just installed openSuse 11.2 (64bit), and I installed the avi codecs as described in Restricted Formats/11.2 - openSUSE-Community with the 1-click installation for KDE. But kaffeine and xine are crashing when I try to play avi files.One thing I found out is that all packages are 64 bit packages only the w32codec-all version is 20071007-0.pm.1.1-i586 and I don't get offered a _64 package. Is this OK? What else could be the problem
View 4 Replies View RelatedAfter having installed Kaffeine on Ubuntu to use for watching Terrestrial Digital TV through my tv-tuner, on Lucid, Ubuntu 10.04.
After installing Kaffeine and the proprietary driver and firmware for the card, starting Kaffeine gave me the following error;
"kaffeine cannot find demux plugin for MRL"
I found this problem difficult to find a solution for; but did eventually find mention of a set of plugins which would provide what Kaffeine needs;
libxine1-all-plugins
This was originally mentioned at old nabble: [url]
I installed this, along with all the Medibuntu plugins (just to make sure) and my Kaffeine then worked without troubles.
Basically, I think if i'd originally installed according to the instructions found at the Kaffeine community website: [url] i'd have had no troubles. However, I must say I expected all dependencies to be met simply through the apt-get install process. Not so for the plugins of course, as I should have known.
After starting Kaffeine and activating the television part the default channel should be displayed but no video and audio.
When I click (single click) on one channel of the channel list the above error message is seen.
I terminate Kaffeine and start ME TV.
ME TV works. I terminate ME TV and restart Kaffeine.Now Kaffeine is working correctly.
It seems that Kaffeine has a problem with initializing.ME TV is initializing something what Kaffeine does not initialize.
After wrestling with Kaffeine on openSUSE 11.2, I thought I had solve the issue I had with it and I got a new error as described below:
Original Issue: Kaffeine will not play a dvd. Error: Cannot find input plugin for MRL
Then: error no longer appeared, but I got a new error.
New error: "Cannot find demux plugin for MRL "dvd:///dev/sr0""
Of course, I could install Demux, but what is this plugin business? Any ideas? Please, if possible include a little information about what MRL refers to.
I am using ubuntu karmic. I log into gnome, but I have kaffeine installed. I find I can't play videos with mp4a mpeg4 audio in kaffeine. The video plays fine, but their is no sound. When I use vlc it plays fine and the codec information reveals mp4a.
I think it might be related to xine as the phonon backend is xine. I try opening the file in xine, and there is also no video. When I try to change the phonon backend to gstreamer, there is no sound for anything. I have libxine1-ffmpeg, libmpeg4ip-0, and libfaad0 installed, though I dunno if they affect this.
I want to use kaffeine rather than vlc because I want to use kaffeine for dvb viewing and recording. In my area, it seems they are broadcasting mp4a instead of mpeg2 or what not.
I have OpenSuse 11.2
I can't play DVD.
I have get this error when I put a DVD: cannot find input plugin for MRL [dvd:/]
I a trying to get DVD playback working on 11.2 64 KDE 3.5I did the one click install.Kaffeine is now broken)I launch xine from the command line and get this when I select DVDYou can see the DVD STRAWBERRY_MARSHMALLOW_VOL1 udf 4.3 GB 0.0 KB in under "my computer" in the image and it shows up under /mediaI have disk and cdrom enabled under my user account. What else do I have to configure so xine can access the DVD drive?
View 4 Replies View RelatedWhen I try to update my system, I get the message: Error: Missing Dependency: xine-lib(plugin-abi)(x86-32) = 1.25 is needed by package xine-lib-extras-freeworld-1.1.16.2-3.fc10.i386 (installed) after a list of packages which are set to be updated.
View 1 Replies View RelatedI had the above message when I first installed openSuse and tried to play DVDs. I tried googling the above message, thinking that I was missing some software. It turned out that the message simply meant that it couldn't find the dvd.
Messages such as:
Cannot find plugin for MRL [cdda:/]
Cannot find plugin for MRL [dvd:/]
Basically mean that SuSE is having problems finding a cd or dvd. This is most likely due to symbolic links for cdrom and/or dvd not being present.
I was having this problem on Kaffeine. Also having problems playing dvds on smplayer and VLC player.
I found the answer to the problem on the following thread (all credit to jdmcdaniel3 for the key initial post), which does a very thorough job of explaining about the 70-persistent-cd.rules file, where to find it, and what you can do with it.
Multimedia Optical Drive Naming (ie /dev/dvd & /dev/cdrom) Howto in opneSUSE - openSUSE Forums
The thread explains how to edit the 70-persistent-cd-rules file or, better, to create a copy called 90-persistent-cd.rules and edit that file to add symbolic link entries for cdrom and/or dvd if they are missing. Doing this it is possible for the cdrom and dvd symbolic links to point to the same physical drive or to different drives, depending on what you wish to do.
Kaffeine seems to expect to find things in cdrom and dvd. It will work once you have set up the symbolic links for these as described in the above post.
If you simply look at the 70-persistent-cd.rules file, you will see the symbolic links allocated to the cd/dvd drive(s) on your system. If you make a note of these symbolic link values you can use them to set the drive information in applications such as smplayer or VLC player :
VLC player - go into Media/Open Disc and set the drive accordingly, depending on whether you are playing a cd or dvd. Needs to be done each time you play a cd or dvd.
I think creating the 90-persistent-cd.rules file as mentioned above and adding the entry for cdrom and/or dvd may work for other cd/dvd playing software that expects to find these links, but I haven't tested running anything other than smplayer, VLC player and Kaffeine. These cover my requirements.
Following the above I am now able to play cds and dvds in my cd and dvd drive respectively.
I have just installed Slackware 13.1 32bit. My hardware is a P-4 3Ghz with a gig of ram. Intel on board graphic and sound.
This is the best implementation of Kde I have used so far. Slack 13.1 is amazing. The install went very well and everything we configured properly.
My problem is when I start Kde or try to shut dowm or logout I get the same error for knotify: Unable to use the Xine Multimedia Backend:Could not find plugin 'Xine' for application 'Knotify'
I get this same error with the application name at the end of it. If I open amarok I get the same error message with amarok at the end. If I try to click a misic file in dolphin same error message.
When I try to shut down or log out from menu I get the xine error and nothing happens. The only way I can log out is Ctrl+Alt+Backspace to get to the KDM log in screen and then I am able to shut down from the menu.
I have been looking on the forum and using google but have found nothing useful.
The error pops up when I try to play a cd or music on the hard drive.
I've just installed a nas on my system. All is ok apart from Kaffeine. It will play the file from the home dir, a usb disc but not for some reason the same file over the network located on a nas. It come up with the following error message:
The connection was configured as a MS Windoze network drive.via dolphin. No problems with compressed,pdf or doc files or copying etc just playing an avi with kaffeine.
Which package needs to be added to play those heinous MP3 files in Kaffeine? Out of the box it gives this error:Cannot find demux plugin for MRL "file:///tmp/xxxxx.mp3".
View 4 Replies View Relatedafter installing xine, i tried to install the rpm plugin in order to play mp3 files but i got the following problem:
# yum install xine-lib-extras-freeworld
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
[code]....
I've already went thorough "Check your multimedia problem in ten steps" and "Multi-media and Restricted Format Installation Guide", but still no luck. When I try to play video Kaffeine just throw out big red cross and then nothing palys.
Code:
LC_ALL=C zypper ve
Loading repository data...
Reading installed packages...
Dependencies of all installed packages are satisfied.
Code:
rpm --query --all 'libav*' 'libpostproc*' 'libswscale*' '*xine*' '*gst*' MPlayer '*vlc*' | grep -v avahi | sort
bluez-gstreamer-4.56-1.1.1.i586
gstreamer-0_10-0.10.28-999.pm.1001.1.i586
[code]....
I have just installed SuSE 11.4 and find that xine and VLC cant play DVDs. xine reports:'input plugin cannot open MRL [dvd:/]' and then 'cannot find input plugin for MRL [dvd:/]'. Plainly I've either forgotten to install something, or somethings' permissions are wrong.
View 2 Replies View RelatedI am just starting with Opensuse , been on Ubuntu for a few years . I am getting Kaffeine to work with my HVR 1600 . I had to add the firmware to /lib/firmware , then install the xine and ffmpeg files . Now tv scans channels and plays . Actually it plays great . I had skipping problems in Ubuntu with Me-tv , not so with Kaffeine .
View 3 Replies View RelatedDoes anybody know how to get playlists in kaffeine 1.0 work (kde 4.3.5).I am unable to do such a simple thing as create a new play list with content ! (create is ok, read from the temp list ok everything seems to work, but the play list never remmember their content.)
View 2 Replies View RelatedI did a clean install of 11.3 and everything went good but i have a problem. There is no sound when i try to watch a movie in VLC, Kaffeine, SMPlayer and xine. But when i open the movie (.avi format) with Dragon player it plays as it should be. I have sound when i test the output in KDE system settings and i listen to music as i write this message. I tried with Xine and GStreamer output but the problem stays. I have all the multimedia codecs that are needed installed. Here is my repo list:
Code:
[code]....
some dvd's don't work with vlc or kaffeine when I select 'open disc'. Here the log from vlc:
[code]...
Seems this is one of very view disadvantages of a case sensitive OS. Has anyone an idea how I could tell vlc or kaffeine(xine) how to deal with that? I don't want to burn all my dvd's again with capitalised entries.
How to configure Kaffeine to use jack. After I start jack with:
$ jackd -v -d alsa
There is no audio coming from Kaffeine.
I just updated my distribution to 11.3 from 11.2. But now this problem occurs when I try to play an mp3. There was no problem before with 11.2.
It also says
Code:
The following plugin is required : MPEG-4 AAC decoder
Only certain mp3s have this problem. All gstreamer packages have been installed. What package is missing anyway?
fc-9-live-usb i installed xine-lib then xine-ui using:
Code:
./configure --prefix=/usr && make && sudo make install
but it didnt create a xine executable
[code]...
I have recently installed 11.2. I am having some sound woes. Vlc plays CDs and DVDs but Kaffeine won't. KsCD won't play CDs. When I try to use Kaffeine to play a CD I get:
Cannot find input plugin for MRL [cdda:/]
Opening kaffeine in the terminal gives:
user@linux-kxg1:~> kaffeine
user@linux-kxg1:~> CDROMREADTOCHDR: No medium found
CDROMREADTOCHDR: No medium found
When I try to use Kaffeine to play a DVD I get:
Cannot find input plugin for MRL [dvd:/]
Do I have to add anything to /etc/fstab? /dev/cdrom and /dev/dvd are pointing to /dev/sr0, but these apps are not seeing the device.
Kaffeine has Empty Video Field, as in it plays a video, the audio comes out but where the video should be is just the screensaver backgroundhrough, even after a reinstallAnyone else having this or had this?Maybe too much fooling around trying to get my tv tuner card working,
View 9 Replies View Relatedthis is my 1st time using linux(opensuse)..i use laptop acer aspire 4710 i already install this os..then i got prob with amarok 2.1.1 and kaffeine..this app can't play..and kaffeine always appear ( error )
[Code]...
I'm using Kaffeine 1.0-svn3 from Packman repo on openSuse 11.2 with KDE 4.3.5. In Kaffeine, I can not find the menu where I can choose the subtitles. (I want to watch an avi-file with a separate subtitle-file in srt format). With openSuse 11.0, KDE 3.5.8. and an older version of Kaffeine, there was a possibility to select subtitle files (srt).
View 5 Replies View Relatedbut after a forum search I only found one similar thread, but seemingly the issue was not totally solved. I just would like to suggest a solution (well, most likely a workaround) for .rmvb Real Player movies which don't work well on Kaffeine, without need to install other players or applications.I first saw many people had similar problems as me: Real Player movies just played sound but not video, or viceversa. I first tried installing w32 codecs, but this seems to be the good solution for 32 bit users, I use 11.3 x64 and didn't work for me. After some Google search I came to this page:Index of /pool/non-free/w/w64codecs/
Seems to be a Medibuntu repository, and I looked for a .tar file, since I was looking for a "w64" version of the codecs. I downloaded the latest .tar.gz file found on the page, the 20071007 one and uncompressed it. It has some codec files and a Readme which tells where to put the files. After that done, without rebooting Suse, I tried again to play the movie, and Kaffeine finally played it well, although now it pops a message saying Kaffeine closed unproperly whenever I close it after having played a .rmvb movie. I think that can be solved by updating Kaffeine, but haven't tried that yet
I tried playing some rmvb videos. I can hear the audio but there is no audio. I followed a few theads related to this but it still hasn't fixed my problem.
One thread says all related packages must be from packman. I have this currently
Code:
mvalviar@mac-mac:~/Desktop> rpm -q kaffeine libxine1 libffmpeg0 w32codec-all xvid libquicktime0
kaffeine-1.2.2-1.pm.1.1.x86_64
libxine1-1.1.19-2.pm.45.33.x86_64
[Code].....
I am running openSUSE 11.2 KDE desktop. (Also use LXDE as an alternative desktop because I am running on a P3 with 512 of RAM.) I originally had followed the guidance at Multi-media and Restricted Format Installation Guide - openSUSE Forums and had Amarok and Xine both working satisfactorily for several weeks. Now, for some reason, both apps begin to load and then crash.
View 6 Replies View Related