When I try to switch to another user, the login screen show the user selection list, but I can't enter anything - when I click on a user name, the computer just beeps. I have to reboot to get out of this.
View 4 RepliesThe login screen does not accept the password for users. Only the password for Root. The problem is not in the command line, but check the password in the screen. I have tried to change the password from the root and it is still the problem. What I can do?
View 2 Replies View RelatedI installed Asterisks On a VM machine.
The asterisk I downloaded came with Centos 5.3 It runs well on VM console But the problem is when It request for localhost login which accepts input but the password does not accept input at all.
I am using LuckyBackup to back up my laptop disk to a USB disk. I would like to display to the user the message "Please mount backup disk" and have the user click "OK". LuckyBackup has a feature to allow issuing commands before it does the backup. I have been investigating scripts (I have never written one.), but do not understand how to use them to this end.
View 4 Replies View RelatedWhat commands do you use to set the INPUT, OUTPUT, and FORWARD chains in iptables to ACCEPT?
View 5 Replies View RelatedQuote:
-A RH-Firewall-1-INPUT -s 10.12.0.0/16 -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
Ex- 10.12.0.0/16, 172.150.0.0/16, 192.168.20.0/24
How can we add multiple sources network address in the above INPUT chain?
For some reason, several irksome changes have occurred. The worst is that it won't let me log in. It will not accept my password.? I was told that if I downloaded Ubuntu, I could use that to get to control panel and fix the problem. After 4.5 hours on another pc, I had the download and the cd does boot Ubuntu. What is my next step I have no working knowledge of Ubuntu.
View 5 Replies View RelatedI have an old PC (130mb RAM, 6gb hard drive).
I installed a command-line version of Ubuntu 10.04 using the Alternate CD. The machine was wiped, and I used most of the default settings.
I used a thirteen character user id which consisted of mixed case letters and numbers, and an eighteen character password that contains mixed case letters and numbers and a # sign.
When I rebooted, the command-line login would not accept my password. I assumed I had somehow made a mistake, and just wiped the machine again and reinstalled. This time I was very careful with the user name/pw.
Again, the command-line login did not accept my password!
On a hunch, I took an old Ubuntu 7.10 Alternate CD and erased the machine again. I installed a command-line version of Ubuntu. AGAIN --- it will not accept my password even though I'm 100% sure it is correct.
I normally dont have a problem installing software. But im pulling my hair out trying to get openvas to work. i used this guide to install [URL].. when i try to login using the client it asks me to accept the certificate i click yes then it fails everytime
View 1 Replies View RelatedMy last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
I just installed ecryptfs (debian Lenny). However, when I try to run it (as normal user), I get the following
$ ecryptfs-setup-private Enter your login passphrase: And it wont accept any password (naturally since this is the first time I'm running it).
I am using a ubuntu 10.10 desktop,i cannot login to my system it doesnt accept the password. when i login in safe mode i get through but when i run any command i get segmentation fault.
View 5 Replies View RelatedThe problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies View RelatedI have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
I running 1 pc touchsmart IQ816 (windows7, standalone) and a sunfire server (fedora 14, standalone).Because my touchsmart screen doesnt support dual screen input, i'm reaching my server true vnc. Is there a beter way (VMware?) to handle this problem?Im new in VMware: Can a esxi server from vmware help me out in this situation?
Do some people have experience on this?
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
View 5 Replies View RelatedA strange problem has surfaced with my CentOS 5.5 Rackspace Cloud Server. I was doing OK until today. For some strange reason, whenever I login to the server, using ssh and pub/priv key authorization, or password authorization for that matter, the letter E (that's an uppercase 'e') does not echo at the prompt line, it just beeps like an error. At the login prompt, before signing in, the letter E is echoed to the terminal window. I'm using an iMac, OS X 10.6 (Snow Leopard) and the standard Mac terminal application.
This behavior does not occur when using the terminal app locally, i.e., logged into the iMac, and all other applications on the Mac are OK with 'E's. To further test the issue, I used the Java console app that Rackspace provides through a browser (I use Firefox, latest revision). Before logging in, the login prompt will accept and echo 'E'. As soon as I authenticate and get to a system prompt, anytime I press a Shift-e, I get a beep and no echo to the terminal command line. It doesn't matter who I login as, root or another user.
To further confuse things, if I start up an instance of nano in that very same terminal window, nano accepts and echoes the 'E'! Using nano, I've created a short bash script file:
#!/bin/bash
echo "ABCDEFG"
and it echoes properly when run.
Any clues as to where I might look to resolve this bizarre behavior?
My getinfo.sh system specs are here here.
I can log into the user directly, ssh, but can't su to anyone
My problems: When i try to so su to any of the user I get this message
Also when screen saver is lock it won't accept my password as well
Example:
Steps and other way I have try to get this problem fix but fail
1] boot up a working version machine and look at
2] check the permission and the sticky bit on /bin/su file
3] went and copy the entire /bin; /usr/bin ; and /etc/pam.d from a working system over the the failed system and it also doesn't help
I have used Ubuntu since 7-4; I now have 10.4. However, in the last week I have been taken to the login screen three times. This could be potentially calamitous. Ctrl+Alt +Backspace have by default been disable since 9-4. There is no way I am pressing atl+Prtscr +K. I wonder if there is a new zap command in 10.4, and if so, how to disable it. I have never found the need to go back back to the login window. I am generally using the command line when doing this.
View 1 Replies View RelatedI recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
yesterday i installed slim login manager on my computer (eee pc 1018p, ubuntu 11.04), and now it cannot get passed the ubuntu loading screen (with orange dots underneath) when booting. i tried booting into recovery mode and that didn't work either. i also left the computer trying to boot overnight and that didn't work.
basically, during this loading screen that should eventually bring you to the login screen, i can alt+tab to see the progress of the load. the progress is stuck on
Is there anything I can do from grub to remove slim?or, is there any way I can access my ubuntu partition and save all my files?
I just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
I just recently updated to openSUSE 11.2, but after restarting my computer, I was unable to do anything with the keyboard(type my password, CAPS LOCK, Ctrl+Alt+Backspace) or move the pointer with my wireless mouse. After restarting the computer again, I turned on the touchpad of my laptop and was able to move the pointer using the built-in touchpad. After yet a 3rd restart, I could not move my pointer using any method.
After a 4th restart, I chose to enter the failsafe mode, where I could attempt to find the problem from the command line. I manually started KDM as root by typing in "kdm", but nothing happened, which means that the screen did not switch into graphical mode, but the terminal only accepted the command. Then, I manually started X as root by typing in "X", and X started. I only saw a black screen, but I could not kill X by the traditional "Ctrl+Alt+Backspace" and was forced to shutdown my computer via the power button.
I do want to note that on every boot of my machine, "WARNING" messages have begun appearing, but they went so fast that I could not read them. If there is any way to read them, I would greatly appreciate knowing. Also when updating my machine, I remember ignoring some dependencies for kernel-extra, kdm-branding, sox, and gcc44-fortran; but I did not believe that ignoring these dependencies could cause a broken system so I proceeded with the upgrade.
I have just did an upgrade from 9.04 to 9.10. I am planning to go to 10.04 . After the upgrade everything was ok but I noticed the GRUB was still legacy. So I updated my GRUB to GRUB2. Now when I boot, after entering my logon-id and password, it just brings me back to the login-id screen (to logon on). Any indication of what is wrong and how I should fix this ?
I have no encryptions. [added comments] Currently reading thread about login loop bug with 9.10 Followed instructions about possible missing pre-release update but even if it did do updates, I am still login screen looping. Doing additional researches until someone answers with the fix.
did :
CTRL + ALT + F1 switch to one virtual console
sudo service gdm stop
[Code]...
When I try to login with my username, the one I created when I installed the OS, it seems to try to login but almost immediately kicks back to the login screen. No authentication error it just seems to just logout? The only change I made since last successful login was to add ". .alias" to the .profile file - the only entries in the .alias file are comments and "alias" commands. I have one other username but it is not in the sudo's list of users so I can not change anything in the master login.
View 3 Replies View RelatedRunning natty. Main user account. In Ubuntu & Ubuntu Classic, both gnome, no keyboard or on-screen keyboard input. Compiz & metacity both bad. Mouse okay. Other user accounts okay. KDE okay.
Tracked problem to /home/{user}/.gconf/desktop/gnome/session/required_components/%gconf.xml. Removed file, problem goes away.
File contents:
<?xml version="1.0"?>
<gconf>
<entry name="windowmanager" mtime="1303412016" type="string">
<stringvalue>compiz</stringvalue>
</entry>
</gconf>
I have program that work like Fedora Firstboot it's run only one time after finish installation. I have two questions to ask.
1. How can I start this application before gdm start (login screen or auto login)
2. How can I start this application in fix display resolution (800x600)
My method now is
(This is a part of script , this script execute from /etc/init.d/myfirstboot , I create symlink to /etc/rc2.d/S1myfirstboot for start it before anything)
gdm-stop # first time I use /etc/init.d/gdm stop
DISPLAY=:1
export DISPLAY
/usr/bin/Xorg :1 &
[Code]...
I don't understand why first time firstboot start the system will auto loging in but not complete yet and then my script is start and it's work does not fine I think that is another user is already login , but if I re run my firstboot again and again (by setting something that can revoke my firstboot and restart) it's work before auto login and every things is ok!
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View Relatedbeen using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.