I have been trying for a while now to get the audio over HDMI working from my PNY G210 graphics card and mythtv but with no luck.
I have followed this guide [URL]
prior to following this I only had my motherboards on board audio showing up but I am now at the stage that I can see the HDMI audio and select it and un mute it but still cannot get any sound out of it.
As a side effect after following the steps from the link above, now every time I boot the computer up my on board audio is muted so I need to un mute it from sound preferences.
This is my audio config as it stands: scott@MythtvFrontend:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog] Subdevices: 1/1
The mother board is a an ASUS MN32-SLI deluxe and I have 2 graphics cards in it, a 9600GT to run the 2 monitors connected and a G210 which I would like to use to connect to my TV using the HDMI output. At the moment I am using the VGA output from the G210 to the TV and a separate audio out from the computer which was working fine but the audio is now always muted on startup.
I don't think it is an issue with my mythtv settings as I cannot get any audio over the HDMI using speaker-test (on board analogue audio works ok).
I've been googling and searching these forums and I can't find a fix. I just discovered that I have a headphone jack on the bottom of my monitor and it would be a lot more convenient to use that rather than the jack on my tower. However, when I switch to HDMI audio output I don't hear anything. I now it's not my cable because it works on my HDTV and throughput audio fine.
I have Ubuntu 9.10 with the Asus M4A78T-E mobo with integrated ATI HD 3300 graphics. I am running the official drivers from ATI, ATI Catalyst 10.3 Proprietary Linux x86 Display Driver, the latest and greatest, not the one from Synaptic. I know this is a bad time to be looking for a fix since 10.4 is out in 8 days but if anyone knows a quick fix that would be great.
I currently installed ubuntu 10.04 and I am having trouble getting sound from my monitor. The monitor that I have is a HANNS-G HH251. It is connected to a Sapphire 4850 Video card through a HDMI wire. The monitor has audio when I boot it in windows7, but there is no audio when I use ubuntu 10.04.
I am running 10.04 with an integrated Radeon HD3200 card. When I set up the tv through hdmi, the sound works perfectly; however, when I switch to analog audio to play something else, the next time I try to use hdmi audio I get nothing. It shows to have good level through Pulse Audio Volume Control - shows like there is a sound coming through it, but I get no audio through the tv. The only way I can fix this is by uninstalling proprietary drivers and reverting back to generic configuration and then reinstalling proprietary drivers. I have to revert back to generic in order to get the sound working again.
I have a dell 1525 laptop with ubuntu 10.10 . Just made the switch from win vista . Everything seems to be perfect, wireless, video, ect. However no audio on my onboard hdmi port. The video is displayed perfect runs very smooth. This could be my lack of knowledge on ubuntu just not understanding what settings to change maybe no driver for the hdmi audio. I would like to add that the laptop onboard speakers work fine.
I have an ECS A785GM-M and the integrated HD4200 HDMI audio was working out of the box on a clean Ubuntu 10.04 install. After the updates and all, everything still worked just fine for a month.
Then, I installed a HD4870 with ATI DVI to HDMI adapter and the sound is not working (it works flawlessly on Windows 7, so it is not the hardware). The creepy stuff is that on Pulseaudio GUI configuration, everything looks right: ATI 48x0 HDMI is selected as output and when some sound is playing the bar moves, although there is no sound coming from the TV speakers.
I tried editing /etc/pulse/default.pa as suggested on this link, but it didn't helped. I'm kind lost here, since it looks that there is nothing wrong and yet, it is not working.
Because of some kind of mismatch between the latest X-server and nvidia drivers which crashes recent versions of the xserver, I've downgraded with a clean install of mythbuntu 10.04.
Trouble is, now I'm getting no sound through the hdmi to the tv. When I try aplay -l I get info for sound card 0 (HDA Intel), but nothing is showing for soundcard 1e So it's not seeing the card, so I can't configure it.
I have recently installed Ubuntu 11.04 64bit. After normal install process, it invited me to install ATI proprietary drivers (because I have an ATI Radeon HD4850 video card). Everything seems to work out of the box, except the HDMI sound. The HDMI video works OK, and also the normal sound using the onboard soundcard work OK. By my knowledge I think I have setup the audio properties correctly. Some screen-shots attached. What happens when I switch the output to HDMI is no audio signal on the TV. The HDMI works OK (both sound and video) on my Win7 64 bit install.
I was running Ubuntu 9.04 and just upgraded to 9.10 recently. I see many others are having problems with their sound. I too do not have sound. I did get sound running briefly with an Alsa update, but it was muffled. In trying many other fixes, I again have no sound and can not resolve it. I am thinking of burning a new cd and doing a fresh install and starting over.
My lap top is an MSI GT725 US model with an HD4850 mobility graphics card. I dual boot between Vista 32 bit and Ubuntu.
Has anyone else had any luck getting the Realtek ATI sound working in 9.10?
I want my computer to be used as a DVD/BD player, and as of recently it has rejected its windows install and refuses to reinstall. Ubuntu 9.10 installed without problem, but when I select the X1200 (hdmi) audio output via the top right icon no sound comes out. I've searched this topic and one theory was that if i ran ALSA mixer the x1200 audio might be muted by default; it was not muted. I've also been told to update my catalyst, but using synaptics packet manager to download the catalyst control center, when I run it I get the message no supported hardware found. Is there any way to get this to work, or am I stuck with my speakers/3.5mm jack?
I'm trying to set up a new HTPC and can't get sound to work over HDMI. If I set System > Preferences > Sound > Hardware and set the profile to Analog Stereo Duplex, I get sound from the speaker port just fine.However if I set the profile to Digital Stereo (HDMI) Output I get nothing on my TV. I'm using 10.04 LTS.Some data:
Code: $ aplay -l **** List of PLAYBACK Hardware Devices ****
Ok, so let me first start off by saying I'm a linux noob. I feel no shame. I've been working on trying to solve my issue for a few days now and after much research I am still no better off. But I am able to at least narrow down my problem. The long and short of it is that my HDMI audio device is not showing up in Ubuntu 10.4 x64 edition. Let me give a few specs.
Motherboard: ASROCK 785GMH/128 Onboard video: ATI Radeon HD 4200 Onboard audio: VIA VT1708S OS: Ubuntu 10.4 x64 Alsa drivers: alsa-driver-1.0.23 ATI Drivers: ATI Catalyst 10.6
Running the latest version of ALSA and ATI's proprietary linux drivers. I can see all outputs (including the s/pdif) except the HDMI. From my reading there should be a device listed on a 2nd card called ATI HDA HDMI aplay -l returns the following result:
I installed Ubuntu 10.04 a few days ago and HDMI audio worked out of the box (with the nVidia drivers enabled). Today I did a system update and (among other problems) there is no more sound coming over HDMI. I'm not really sure what to do to diagnose this problem... where would I start?
im trying to get my xbmc box running on an asus ion mobo. in gnome i set all audio output to the hdmi driver but im not getting any sound on the tv. Im a newbie by the way so it's problably some silly thing.. but i've included a link to my alsa information and pulseaudio settings in case it's a big thing.URL...
Recently I installed Ubuntu 10.10 64bit and I have a problem with it.
I have a motherboard with internal audio card as well as I have ATI 2600 card. When I just installed Ubuntu 10.10 sound via motherboard worked perfectly.
But some time later it disappeared. Actually "Output device" that represents audio card disappeared. See screenshot of the Audio Settings dialog.
I made 2 thing - most likely that one of them cause this problem: - I tried to setup Panasonic Plasma TV as a second monitor via HDMI output of my video card (ATI 2600). - I added maven-backports repository (new kernel or new audio driver?)
Have anybody seen this problem? Are any pointers how to fix it? If you need any additional info - let me know I'll be glad to provide it.
I've recently encountered a sound issue and I recently installed the nvidia gt220 in my box and was thrilled at how well it worked with hdmi until I tried to use the audio. I updated my alsa and went into the alsamixer and it does detect my gt220. I unmuted all spdif and tested the sound and with success the sound test works. I know the card and device numbers that work with the audio but now sure where to make changes so it will default to that device instead of the onboard audio that it seems to try to use now. I am running lucid 10.04.
I have been pining over and over through 100s of forum posts to no avail. My problem is that my audio through HDMI does not work fully. I upgraded to 1.0.23 alsa release, which seemed to help, but I cant get anything besides 'Digital Stereo (HDMI) Output' from System-Preferences-Sound. Maybe this is normal, and I will have to rely on xbmc, etc. to provide 5.1 surround sound?
I am trying to connect my desktop computer to my TV and I need some assistance with using audio over HDMI. I have an NVidia 580 GTX graphics card and I am on Ubuntu 10.04. I compiled and upgraded to newest alsa, so my HDMI audio shows up as one of the sound cards. I also read that I should manually unmute everything that shows up in alsamixer that is related with the NVidia card, and I did that as well. Unfortunately I still don't have any audio.. Here's the output of aplay:
Code: $ aplay -L null Discard all samples (playback) or generate zero samples (capture) default:CARD=Intel HDA Intel, ALC1200 Analog Default Audio Device front:CARD=Intel,DEV=0 HDA Intel, ALC1200 Analog
I recently installed Ubuntu 11.04 on my HP Pavilion dv4-1040ee laptop which was shipped with nVidia GeForce 9200M GS graphics card, the only problem that I'm currently facing is that the computer was not able to detect my screen by using the HDMI port. So, I thought that may be it was a driver's issue so I installed the latest nVidia dirvers by using the command
Code: sudo apt-get install nvidia-current When I restarted the computer nVidia's logo appeared during booting and nVidia X Server
I'm just not able to connect the dots regarding NVidia, audio and HDMI.I have Ubuntu 10.04 installed and updated the ALSA driver to version 1.0.23 using the script posted in another thread on this forum. Although I got a config issue in the process my NVidia HDA device shows up with
xbmc@MediaPortal:/etc/modprobe.d$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
why do I see four NVidia HDMI devices (3,7,8 & 9) in aplay -l, I couldn't find an explanation for this? Next I got smplayer giving audio over HDMI when selecting either of the HDMI devices in the audio config menu, but after a reboot, even if one of them is still selected I need to change and apply before I hear sound. Is Pulse Audio or alsa or some other thing interfering? I just do net get sound working although XBMC lists HDMI for sound output and for passthrough. More precisely I have the options (High Definition Audio Controller Digital Stereo (HDMI), default, custom) for Output Device and (HDA NVidia hdmi and hdmi) for Passthrough of which I tried all combinations.
visit the link [URL] and read specifically the HDMI Audio section. Don't worry if you are unable to test for the sound. Connect the HDMI cable from the laptop to your LCD tv. This should be trivial. Make sure you switch your TV to HDMI input from its menu options. After enabling the HDMI configurations on your laptop using Step 1. Click on System--> Preferences --> Sound. Click on the Hardware tab. By default it might be set to Analog Stereo Duplex. Go to Output tab. Change the Connector drop down from Analog Speakers to Analog Headphones. Go back to Hardware tab and select Digital Stereo (HDMI) Output. Function+F5 would direct the video output to your TV. Incase you have a problem redirecting your video output to the TV. Restart your machine with the HDMI cable connected to your TV. With the configurations you would be able to hear sound from your TV. Have a blast! I have tried this with Acer 5738 it might work with other Laptop configurations as well.
I spent a few days trying to make audio work on my TV connected via HDMI to a PC. The speaker test used by the sound preferences was dead, as was MPlayer. I managed to find a solution for MPlayer, giving the option "-ao alsa:device=hdmi", as specified in this article:So, basically ALSA can see all my devices. This is the output of aplay -l:Quote:
**** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog] Subdevices: 1/1
I still can not get HDMI audio workign on my zotac.. there is a lot of post that talk about it here but i can not seam to get any of them to work, and may are pre mavrick...
I made a sim post a while back about ubuntu but no one replied....
I am no truing xubuntu but still no luck
Like there is this post but it is from 2009... so all the inputs are wrong.. [URL]
I am using a fresh install of xubuntu off the official desktop ISO from the xubuntu site. All i have done is install, activate the NVIDIA hardware drivers, reboot, then download and apply the 150 or so updates though the update manager.
Code: cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.23. Code: aplay -l **** List of PLAYBACK Hardware Devices ****