I have 10.04 (kernel 2.6.32-22) and have noticed that whenever i have Rhythmbox running; the keyboard stops working in any apps. As soon as I close Rhythmbox, they work again!
View 4 RepliesThis is the first time I've got a major problem with Ubuntu (I started with version 5), and this one is particularly frustrating.I'm running Ubuntu 11.04 on my old (2007) desktop PC.Occasionally, but more and more often now, the keyboard just stops working. The mouse is still fine. When I shut down, I would sometime notice that the "stop crash report generation" process fails. Then the shutdown sequence stops at some point, and I am forced to do a hard shutdown, power down for a while, and reboot. If I don't wait after power off, the keyboard freeze would occur again at any time during the start up sequence. I even had a keyboard freeze after manually switching to the Windows boot.
View 2 Replies View RelatedI'm using Ubuntu 10.04 since several months and I randomly have problems with the keyboard (PS2). Maybe 2-4 times per week the keyboard stops working all in a sudden. The symptoms related to this can be- the keyboard simply does not react any more to key press- during typing the keyboard gets crazy and fills the lines with the last typed character- opened windows move to the left when touching them at the top bar, keyboard does not react any more. When clicking on a panel menu the focus line is running permanently quickly through all items, and it's practically impossible to click on any of those (so even shutdown is difficult to achieve, and I might need to use a hard reset).
In nearly all cases the problem only disappears after reboot, just very rarely a logout is sufficient to get the keyboard working again. I googled for similar problems and found quite some people having problems with keyboard (and/or mouse) not working correctly under Ubuntu, but I have not stumbled over a similar error description as I have.Just some config parameters on my box: amd64, XOrg uses an Nvidia driver, 3D and Compiz are activated
Sometimes Ubuntu 10.04 will get into a state where the system stops booting when it apparently attempts to initialize the USB keyboard (keyboard goes dead and never lights up again)(Saitek Eclipse II keyboard).
It either works, or doesn't work consistently regardless of reboot. I don't know what makes it stop working. (Or start working) Recovery mode doesn't work either. Or the saved -21 kernal.
I have an ASUS M4A88TD-V EVO/USB3 and have the -30 generic kernal.
I can dual-boot into WinXP just fine.
I have an old dell server that I decided to try to install ubuntu server on. My problem is that my keyboard stops working after making my initial selection of installer language and install option. As soon as I select install, I receive a message stating that IRQ 14 has been disabled. Next, I am faced with a screen asking me to select my installation language using the tab, space, and enter keys. But to no avail, my keyboard no longer works. No arrows, no tab, no space, no enter, he num lock key will not toggle it's respective LED.
I should note that I'm using a PS/2 mouse (there are no USB ports on this server). I've also tried multiple PS/2 keyboards, and all act the same. I've looked in my BIOS settings, and the only option I see is for enabling/disabling the on-board PS/2 keyboard. I have not tried disabling that, because I have a funny feeling I would lock myself out of the server for good. I also tried non-graphical mode (at least I think that's what I did). I held in the shift key while booting the CD, and selected no to using graphics. At the "boot:" prompt, I just hit enter.
Have strange problem when I get asked for my password in the terminal, the keyboard stops working, below is a sample of the terminal window.peter@peter-desktop:~$ sudo ufw status[sudo] password for peter:When I press the keyboard nothing happens.
View 2 Replies View RelatedMy PS2 keyboard randomly stops working. Sometimes instead of this it get stuck on a letter/number (for example, it starts writing "aaaaaaaaaaaaaaaaaaaaa" non stop) and it stays that way until i reboot my computer. Even the leds (num lock, caps lock, scroll lock) stop responding. Yes, i have tried to unplug and plug in the keyboard but nothing really happens.
View 8 Replies View RelatedHave strange problem when I get asked for my password in the terminal.Using Ubuntu Lucid 10.04. I was typing : sudo ufw status. When the keyboard asked me for my password then when I went to type in my password nothing typed.When I press the keyboard nothing happens. Just started today.
View 1 Replies View RelatedI recently compiled a new kernel (2.6.38.8) but it seems I forgot something. Right after grub, when the new kernel is selected (by using the keyboard), the keyboard stops working (it's on usb). When I select the old kernel everything is working nicely.
I actually used the config of the old kernel to configure the new one but excluded some modules before I finally compiled it. Now I'm asking myself which modul did I erroneously throw out?
Edit: A somewhat related question: Is there a log somewhere in the kernel source folder (or someplace else) which shows the kernel compilation process?
I tested these problems on both Linux Mint 9 and Gentoo Linux. Periodically (err... randomly) when using opera 9.80 and doing things like watching videos or testing java applets, the keyboard will stop functioning. This requires a complete reboot of the PC to get back the keyboard functionality. I guess windows isn't the only one that requires frequent reboots. :-/ 95% of the time it just doesn't work and the other 5% of the time it only.. sorta works. The buttons never work. Thats a different problem though as I have Minitube that kinda fixes the ..... problem. That is all I use flash for anyways.
I know the java applet I am testing works perfectly using appletviewer and in every windows browser I tested (IE, Opera, and Firefox) but when using Opera on Linux there is no keyboard input. The java applet crashes firefox so that is out of the question. I would open the Java console to see if there was any errors but that crashes the browser. I didn't have any problems with Java before Oracle owned it. Could be just a coincidence?
I am working on a Dell Inspiron 9400 with 9.10 installed and (thus far) working quite well. However, when I type in a command into Terminal (I was trying to install Amarok), the terminal asks for my password and the entire keyboard stops working. As in, I can hit any numerical or letter key, and nothing happens in the terminal but the blinking cursor. The specific command was "sudo apt-get install amarok", and then it asks for my password, and I'm not able to make an entry.
I've tried changing to a couple of the different Dell laptop keyboards in System>Preferences, but again, before typing the command into the terminal, everything is working fine (inside AND outside of the terminal). After the password prompt comes up and the keyboard stops working in terminal, all the character keys still work fine still outside of the terminal.
After installing KDE USB keyboard and mouse won't work. They are added to /proc/bus/input/devices though.
I also tried to install Gnome; same thing.
I took #usb-devices and they were there also..
But #usbhid-dump did not generate anything to screen.
I'm installing slack 13.0 in a Dell 2350 for a friend. once installed, it works ok for a while then within some somewhat random period of time, just plain locks up. the keyboard stops working, the mouse cursor still moves, but there is no response from mouse clicks. i was ssh'ed into the machine one of these times to see if i could read the logs during a lockup. the machine stopped responding to the ssh session as well (actually i had an instance of mc running at the time, and the machine still responded to it. when i exited mc, i was stuck in console never-never land). the logs show absolutely nothing. /etc/messages keeps showing MARK long after the lockup. all other logs are not updated since boot. this machine has an i810 chipset, is there a driver issue here?
View 6 Replies View RelatedI'm running Ubuntu 10.10 Maverick Meerkat 64-bit on my desktop with a wired internet connection (with no firewall). For the past 2 days, I have observed that1. Firefox randomly throws up errors like "Problem loading page" whenever I click on a hyperlink. When I click on Reload, the page loads up just fine. This has been happening a lot recently..and I do not remember updating anything consciously. By the way, ipv6 is disabled in Firefox.2. The network stops working all of a sudden (usually indicated by the Firefox error). The Autho Eth0 indication is active, but I am unable to connect to any external machine.
3. Needless to say, this error is manifesting itself in apt-get as well. I get "something wicked happened" errors all the time, and am unable to download or install anything.That this is not a problem with the ISP is obvious because I also have Windows (from which I'm typing this, ironically), which is able to access the internet.Is this a bug in Ubuntu 10.10?
i first noticed it while running VLC when at least one of my keyboard hotkeys stopped working. I tried reassigning the key and then reinstalling the packages from SPM and it failed (using kow's ppa) then i did a clean uninstall and reinstall from A/R programs, which didnt fix anything. then later i had problems typing in firefox, specifically with the number pad (the hotkey i'm referring to is also part of the number pad) something makes me think it's my keyboard or keyboard driver, i've been keeping up with the updates for Jaunty, including the most recent kernel update.
View 2 Replies View RelatedI am running Ubuntu 9.10 on an HP dc5100MT workstation. Sound works nearly all the time, but once in a while, the sound stops and I have no idea why. The channel is not muted, the volume is 100%, and not even rebooting fixes it. It will just start working on its own.Under the Sound Preferences panel, the output volume is 100%. The channel is not muted. I can get sound out of the internal speaker by changing the connector to "Analog Output (LFE) / No Amplifier", but not out of the "Analog Output / Amplifier" which is the green sound cable plugged into the sound card.I only use this machine as a video player using VLCNothing else.I would like to know some tricks to isolate and troubleshoot this when it happens.
View 2 Replies View RelatedI'm running Ubuntu 10.04 64bit.
This happens on Chrome and Firefox.
When I'm running a flash site like, Pandora, it stops working when I open another tab with flash running like, Hulu. Now it doesn't stop working right away but in time it does.
Then screen on that tab usually goes grey.
Now this doesn't happen all the time but enough to get me flustered.
Routinely, while I'm working on my laptop, the sound will randomly stop working and I can only get it back by rebooting. I can't seem to find any sort of pattern to what gets it to stop working, but I do have the following programs almost always running: Evolution, Chrome, Transmission, and Pidgin. I usually notice it first when Pidgin stops beeping when I receive IMs.
In the messages log I see lots of messages like this when the audio stops working:
Code:
Nov 9 10:35:04 jbirdjavi-l-u pulseaudio[2031]: sink-input.c: Failed to create sink input: sink is suspended.
Nov 9 10:35:42 jbirdjavi-l-u pulseaudio[2031]: last message repeated 7 times
Nov 9 10:38:18 jbirdjavi-l-u pulseaudio[2031]: sink-input.c: Failed to create sink input: sink is suspended.
Nov 9 10:39:29 jbirdjavi-l-u pulseaudio[2031]: last message repeated 8 times
Nov 9 10:40:42 jbirdjavi-l-u pulseaudio[2031]: last message repeated 3 times
Nov 9 11:01:16 jbirdjavi-l-u pulseaudio[2031]: sink-input.c: Failed to create sink input: sink is suspended.
[Code]...
I am using Ubuntu 10.10. At some point gnome-mplayer (and gecko-player) have stopped working. Try open any audio or video file there is nothing (the progress bar just shows "stopped"). However, Smplayer is working flawlessly for both video and audio files so I am sure it is not a mplayer problem
I have delete the folder .conf/gnome-mplayer but nothing changes.
gnome-mplayer version 0.9.9.2
mplayer version 2.0
My problem is this: when I suspend, sound disappears, and I have to reboot to get it back, which is, needless to say, rather annoying. I'm using Ubuntu 11.04, with a low-latency kernel.
I have three sound cards:
1) Delta 1010LT, which uses snd_ice1712
2) Sound Blaster Audigy 2, which uses snd_emu10k1
3) Some on-board Realtek thingy, which I guess uses snd_hda_codec_realtek
I use jack on the Delta1010LT, and I run pulseaudio through jack.
When, after a suspend, I try to restart jack via qjackct, it gives up and prompt the following:
Code:
Acquire audio card Audio1
creating alsa driver ... hw:M1010LT|hw:M1010LT|128|2|44100|0|0|nomon|swmeter|-|32bit
Using ALSA driver ICE1712 running on card 1 - M Audio Delta 1010LT at 0xec00, irq 16
configuring for 44100Hz, period = 128 frames (2.9 ms), buffer = 2 periods
code....
I've just installed Ubuntu Karmic on a HP pavilion AMD 64 bit.I've a weird problem: the microphone works good, but using skype 2.1 beta, it stops working when te my webcam. Even after restarting skype, the microphone doesn't work. To make the microphone work, it seems to me that I've to reboot.
View 4 Replies View RelatedAs the title implies, the sound on my rig stops working after a while. Annoying as hell: I have to reboot my machine to get it to work again, which means that I have to reset my entire programming environment (with five full workspaces). I'm running 9.10 Karmic.
View 1 Replies View RelatedI have xorg configured to enable middle button emulation:
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
[code]...
I just upgraded to 10.4 lts, and compiz stoped working. EDIT: lspci | grep VGA gives me:
Code:
00:02.0 VGA compatible controller:
Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
If I try to run it from terminal i get:
Code:
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
[Code]...
After "yum install emacs" & "yum install emacs-ess", I was able to install emacs on my X86_64 running Fedora 10.
If I run one session of emacs everything works fine.
Once I start a second session and try to resize or move the emacs window, the system stops responding.
Rythmbox does not open a window on the desktop, but its icon appears in the upper taskbar. I have to click on the icon to open the Rythmbox window to select songs etc.
I'm sure there's a simple fix for this, but I haven't been able to locate it.
Ubuntu 10.04
I used the script mentioned here [URL] to convert some wma files to mp3 however rhythmbox will not import these. Is this to do with the way they were conveted? Is there a better way or will converting wma to mp3 always result in this? Was going to try soundconverter but I wasn't sure if this would just do the same thing.
View 7 Replies View RelatedI keep getting this error when I try to run an Audio CD using Rythmbox Music Player.
Could not open location cdda://sro/' Failed to execute child process "sound juicer" (no such file or directory)
I'm running Rythmbox 0.13.1 on Ubuntu 10.10 netbook edition.
My problem is that edits I make to tags sometimes don't save in Rythmbox. After I make the edit and click save it appears to have changed. (IE, the genre will change or the comment section will be different.) But if I reboot Rythmbox it has reverted to its previous state.
Not sure what's going on. Is this something I should fix or should I file a bug report and wait for the next version of Rythmbox?
i plug in my mp3 player and nothing pops up. i would like to move songs from my library to my mp3 player. i have no clue what im doing here.
View 2 Replies View Related