Ubuntu Multimedia :: Jack Control - Feedback Crescendos Then Cuts Out
Jun 12, 2010
So I've used Jack Control for sometime now to control my recording suite that I use (Ardour, Rakarak, and Hydrogen Drum Machine) recently however, when I start the Jack control, as soon as I connect input to output in the connections window, it's like it has internal feedback. The feedback crescendos, then cuts out. after that (let's say I have my Fender plugged into the sound card) if I strike a string there it comes out muddy distorted with an awful echo (some what like what echo would sound like on blown speakers). I have checked all the settings, everything is as it was before when it worked fine... dunno... is Lucid possessed?
View 9 Replies
ADVERTISEMENT
Jun 24, 2011
I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:
View 9 Replies
View Related
Feb 28, 2011
I cannot get the jack control window to open. I uninstalled and reinstalled twice and no change. I have sound but would like to get Rosegarden running with Qsynth.
View 5 Replies
View Related
Oct 16, 2010
I'm new to ubuntu but i do have a basic understanding of programming, but nothing too serious. The reason I am mentioning this is because I have a little project. Currently I use JACK to control the transport of all the aps i use to make music with ardour, hydrogen and rosegarden mainly. I also have an external midi drum machine that I sometimes hook up into the mix via midi in/out, my drum machine (yamaha ry to be exact can send and receive midi data. My question is can I use the transport controls on my external drum machine to control JACK's transport controls? If there is already am app that does something like that, excellent!
View 3 Replies
View Related
Feb 22, 2011
I am having trouble getting the audio to work on this computer (ACER 5570-4765 with PCM Audigy ZS 2) running Ubuntu Studio 10.10. I can get JACK to run without errors but I am not sure if settings are correct. For now I would just like to listen to music using Audacious but I would eventually like to record guitar using Rakarrack (I have this installed but I am having zero luck with this as well).
Here are a few lines from the JACK message screen.
19:13:18.734 JACK is starting...
19:13:18.735 /usr/bin/jackd -P1 -dalsa -r44100 -p1024 -n2 -D -Chw:0 -Phw:0 -S -i1 -o1 -Xraw
19:13:18.748 JACK was started with PID=2671.
no message buffer overruns
no message buffer overruns
jackdmp 1.9.6 .....
Scans a bunch of ports then :
ALSA lib rawmidi_hw.c:233snd_rawmidi_hw_open) open /dev/snd/midiC0D0 failed: Device or resource busy
scan: can't open port hw:0,0,0 in-hw-0-0-0-Audigy-MPU-401--UART-, error code -16, zombified
ALSA lib rawmidi_hw.c:233snd_rawmidi_hw_open) open /dev/snd/midiC0D0 failed: Device or resource busy
scan: can't open port hw:0,0,0 out-hw-0-0-0-Audigy-MPU-401--UART-, error code -16, zombified
View 2 Replies
View Related
Jun 27, 2011
I've got an Acer Aspire 5101 with Natty on it and everything works so far, but I can't start Muse. It says: "Muse failed to find a jack audio server". At the bottom it also says: "...if Jack was started check if it was started as the same user as Muse". This might be the issue. But how can I check this? BTW: Jackd has been installed and I am a Member of the Audio Group.
I am new to Ubuntu and don't know how to fix this. I got this Notebook for free, because my Brother wanted to dispose it as it didn't worked properly after he reinstalled xp. Only the dvd-drive is broken, the rest is in really good condition for such an old thing. After a lot of trial and error I could finally install Natty from USB.
View 1 Replies
View Related
Aug 17, 2010
I am a sound engineer trainee and I'm desperately looking for a Linux version of the Simple Feedback Trainer [URL]. It's a rather easy but very good program that provide info to sound engineers train the detection of feedback frequencies. Do you know if such a thing already exists? I haven't been able to find it in the Ubuntu Software Center.
View 2 Replies
View Related
Oct 12, 2010
I'm running Maverick right now, but the problem also occurs with Lucid. My sound card is a creative X-Fi Titanium (emu20k2). Audio playback is fine, surround is fine, etc. Audio capture is "fine" too - the problem is that the microphone picks up everything that the headset is outputting. This is very strange since the headset is a noice-cancelling headset and in order for that to happen on other platforms (windows) I essentially have to turn the volume up to astronomical levels. As always, this doesn't happen on windows.
Needless to say this poses somewhat of a problem with VoIP applications since folks I'm interacting with constantly hear themselves echoed back by me. The only solution is to tune down the microphone volume but that adds another problem: people can no longer hear me clearly.
So my question is: is there a way to enable echo reduction for Pulse Audio so that the mic doesn't constantly capture what's coming from the outputs? And yes - when I look at the "input" tab in the sound preferences application I can see the marker move if I speak - same with pavucontrol
View 1 Replies
View Related
Jun 15, 2010
This is one of two niggles I've had in migrating to ubuntu, which I must say is (otherwise) absolutely fab.
Problem 1 is an 18 month old "legacy" ATI card, which refuses to be fixed.
Problem 2 (I suspect) is more solvable.
When listening to music, (either from ..... or rhythmbox) after an indeterminate period of time, (it varies substantially from around 5 mins - 1 hour) the sound cuts out without warning. Videos continue to play, but in silence. This silence affects the browser as a whole (chromium). A workaround for this has been to simply restart the program, but this is becoming quite annoying. Sometimes issuing
Code:
Is necessary to restore sound.
View 6 Replies
View Related
Aug 19, 2010
I've recently upgraded to 10.04, and never had any problems in 9.10, but now, sometimes when Banshee attempts to play a sound file, it will kill my sound output until I reboot. Haven't been able to get anywhere by fiddling with ALSAmixer or the like, and everything is just fine on reboot, but the files don't always cause problems, and they were all fine back in 9.10. Has anyone else encountered this? I've been unable to find any other references to this problem.
View 2 Replies
View Related
Jul 11, 2010
When the opening little music plays during start up, the first half of it is loud, but halfway through, the sound cuts to about half volume. Everything else afterwards is also very quiet. After boosting the volume output to 150%, and boosting VLC's audio output to 200%, the audio is still barely audible on my laptop. I've gone into alsamixer, and it's at max. I once found how to reset the audio card, and the sound was normal again, but only until I shut the laptop off, and next time, it was the same as always.
I'm on Ubuntu 9.10, and using an old Toshiba Satellite laptop. Don't know what my sound card is.
View 1 Replies
View Related
Mar 27, 2010
i am using ubuntu studio karmic and i have a digitech vx400 audio effects pedal which serves as an audio in/out midi in/out device via usb. i can sucessfully set it as the system sound device in system>preferences>sound for both input and output. but, when i play audio through it it only works for a few minutes before the sound stops completely. if i leave the system settings set to the internal sound card and configure jack audio connection kit to go to the usb device, i get the same results on the usb sound. a few minutes of playback at the most.i can restart sound with either "pulseaudio --kill && pulseaudio --start" or "alsactl init" in either situation. just requires restarting the programs. same results after restarting. i think this is alsa related as i have both the system sound and jack using the alsa driver, but i don't truly understand the relationship between pulseaudio and alsa.
View 5 Replies
View Related
Aug 17, 2010
This happens nearly anytime I watch any relatively lengthy flash video on ..... or other online flash players. I watch the video, and the audio is fine for a few seconds, but then the audio cuts off as the video continues to play. Sometimes, when I move the scrollbar of the screen/pause and replay the movie, it starts back up again for a few seconds then shuts off or plays the audio I just heard.
View 5 Replies
View Related
Jul 15, 2015
I use the default Inkscape 0.48.5 r10040 on the default 32 bit Debian Jessie with Gnome 3.14.1 and since I installed it I can't apply some font cuts which actually do work in other applications and did work on previous versions of Debian/Inkscape.
The cuts do show up as options in the "font/style" selection menu and i can use different versions from for example "Roboto" but if I - for example - select to use the "Semi-Light" variant of Roboto it just doesn't get applied after all. (I know that many fonts do not have any font variations and Inkscape confusingly just shows at least "italic" and "bold" as options in the style list anyway.) In this case the font variant is actually there, I can use the same font variants in Gimp and I was able to use it in previous versions of Debian/Inkscape, but not now.But I noticed instabilities in Gimp, Inkscape and Scribus lately. Gimp just consistatly vanishes when I try to scroll through the font selection menu and Scribus takes ages to load and does crush from time to time without any clear pattern to me. I don't think this is caused by Roboto itself since I used it in the past without such problems.
Should I remove all custom fonts and try if everything works ok again or does this approach sound rather foolish to you? Unfortunately I need most of the additional fonts I installed for different projects and I had them on my system in the past also without having such issues. I could however remove all custom fonts and include only those absolutely needed one by one ...
View 3 Replies
View Related
May 2, 2010
For starters; although I am comfortable with Ubuntu, I don't really understand these midi and jack things,Ok,so I got a midi controller keyboard which I want to connect to my ubuntu pc to start making some music (play piano and possibly try to make some songs). I don't know if my sound card supports midi, but I got a Roland midi-to-usb converter. I connected it to my pc and downloaded Jack Control. When I fire up Jack control my normal music (using audacious) stops (don't know if this is normal). On the window that appears I hit start which results in an error, which I will paste below:
Code:
22:46:06.556 Patchbay deactivated.
22:46:06.560 Statistics reset.
[code]....
View 9 Replies
View Related
May 6, 2010
I have an ESI Gigaport HD USB external soundcard which I'd like to use via Jack with my Thinkpad T40 running Ubuntu 9.04.This is the card, it has no inputs and 8 x outputs:
[URL]
The card is autodetected on plug in. I can see the 8 x outputs in the Jack connection window but I can't run any sound to it. Anything I connect to it on any of the 8 channels is silent.
View 4 Replies
View Related
Aug 30, 2010
I had Ubuntu 10.4 installed and JACK was working excellent. I noticed that gnome was a little more than what I needed so I installed the xubuntu-desktop package. After that install JACK no longer works... I run the command jackd -d alsa and I get a bus error. I did a new install from an xubuntu iso and same error.
View 4 Replies
View Related
Dec 1, 2010
Same as above. I've fiddled around, but I can't get Rosebud to work. I have Qsynth, ZynAddSubFX Synth, JACK control, and Rosebud but I can't get any of it to work
View 9 Replies
View Related
Jan 26, 2011
Can't get jack to work. Installed from synaptic (running ubuntu 10.10, 64bit).
WHen ckicking "start" in qjackctl (jack control) I keep getting this message:
19:27:58.615 Patchbay deactivated.
19:27:58.616 Statistics reset.
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
[Code].....
View 2 Replies
View Related
Feb 18, 2010
I just realize that when I plug in my headphones in my laptop, the sound in the laptop's speakers continues to play and I have no sound on the headphones. This is the output of the 'sudo lshw -C sound' on my system:
*-multimedia UNCLAIMED
description: Audio device
product: nVidia Corporation
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: memory:d3000000-d3003fff .....
View 7 Replies
View Related
May 2, 2010
Why do this? Two reasons:
1) Many of us use JACK for low-latency audio work, but it's annoying to have to turn it on or off to have to allow regular Ubuntu applications to work. It's even more annoying that both can't normally work together -- either JACK or PulseAudio must take control of the sound control. This method allow JACK to do, and PulseAudio just routes to JACK.
2) JACK is kinda super awesome. By routing PulseAudio through it, your regular Ubuntu sound application suddenly get super powers. Pretty easy to do! (Well, we count our blessings in Linux...)
1. DYNAMICALLY You need the PulseAudio utilities and JACK sink:
Code:
sudo aptitude install pulseaudio-utils pulseaudio-module-jack And then run this to get PulseAudio connected to JACK: Code:pactl load-module module-jack-sink pactl load-module module-jack-source Now, go to Ubuntu's sound preferences, and you'll see "Jack sink" in the output tab. If you use JACK Control, you can create a script for the above and have it set up in "Execute script after Startup". Then, PulseAudio will automatically load the JACK sink when you start JACK.
2. BY DEFAULT Edit /etc/pulse/default.pa, and add these lines:
Code:load-module module-jack-source load-module module-jack-sink You can test it without rebooting by restarting PulseAudio. In Ubuntu, PulseAudio is started in the user session, not as a system daemon. To restart it:
Code:
pulseaudio --kill
pulseaudio --start
View 9 Replies
View Related
May 9, 2010
I can not get sound to exit from my headphone jack, whenever I plug it in, no sounds come out. Notebook model is Acer 3820TG. By the way, I've tried adding the line for HDA Intel with udo gedit /etc/modprobe.d/alsa-base.conf
[code]...
View 1 Replies
View Related
Jun 25, 2010
JACK will not run ( eg. the server just won't go! ) When running Rosegarden I can not access the Qsynth/Fluidsynth.In the Rosegarden "manage MIDI devices" menu it now shows ONLY one "General Midi Device" -thats all, and I do not know where to/how to get access to qsynth/fluidsynth to use soundfontsIn manage midi devices I ONLY get the option of "general midi"and then its only through "14:0 Midi through port 0 (duplex)" and no
other channels are available or offered!If I import one of the devices that come with rosegarden ( like Aleisis ) there is no sound.
Also if anyone knows: (& if I can fix the above) how do I set Rosegarden to use a software synth like ZynAddSubFX on the track/channel? External softsynths do not show up, so how do I assign the channel to use them>
Ps: Rosegarden did not install with the help files, even a complete removal and reinstall does not fix this- hats why I may be asking questions which could possibly be in the Rosegarden manual ( but NOT anywhere online that I've found in 3 days of searching- and I'm a research assistant for cognitive sciences- eg: good at researching! )
Here's the JACK output:
First the error:
COULD NOT CONNECT TO JACK SERVER AS CLIENT
-Overall operation failed
-Unable to connect to server
Heres the message window output:
p, li { white-space: pre-wrap; } 10:39:56.296 Patchbay deactivated.
10:39:56.478 Statistics reset.
10:39:56.549 Startup script...
10:39:56.549 artsshell -q terminate
[code]....
View 3 Replies
View Related
Jul 27, 2010
I have a little issue.
I have netbook Asus EEE PC 1001PX (he's got only one jack for headphone and mic, i dont' know how this could work... but anyway)
I have no sound from headphone, from speakers is ok.
I've already edit /etc/modprobe.d/alsa-base.conf and insert the options snd-hda-intel model=asus at the bottom, still nothing.
I've try also to uninstal linux-backports-wireless... and still nothing.
Card: Intel HDA.
View 9 Replies
View Related
Sep 4, 2010
Jack runs, but I can't get sound to play through it. Another thing that happens is when I launch jack, all audio in the system, whether its connected to jack or not, goes off. There are no errors or anything in the messages window. And I checked to see if it was connected to the correct interface. I have a mac mini and I run ppc lucid lynx. The system does detect my hardware, and its not muted. All I want to do is use MusE. Is there maybe anyway to run MusE without jack?
View 3 Replies
View Related
Sep 9, 2010
I finally ditched PulseAudio and set up my system with a realtime kernel. I'm redirecting ALSA over JACK. The good: - Awesome, I can get <5ms latency without any xruns! (although 23.2 msec as described below is just fine for me) The bad: - I'm a long-time linux audio user, but have got some minor issues which spoil the fun.
1. Without pulseaudio, the indicator applet refuses to show a volume control applet. The old gnome-volume-control-applet (the one with tooltip!) loads but doesn't show in the gnome-panel. Although I can set the volume with envy24control, it's not quite as practical as using the scrollwheel! Any way to fix this?
2. When I launching any application (such as a terminal) from the gnome-panel, a new JACK connection is created, but not cleaned up after closing the application. As a result, the QJackCtl connection list is flooded with alsa-jack.jackP.8528.xx connections (where 8528 is the process ID of gnome-panel). The jack_lsp command line program shows the same (added spaces after every : to get around the smiley filter):
[Code].....
View 3 Replies
View Related
Sep 28, 2010
I am trying to set my computer up to do sound sequencing. I want to plug my MIDI keyboard in and record with a sequencer. Running 10.04, was following a tutorial on installing JACK, and my audio stopped working. Since then, I've gone through all guides I can find, some advising an upgrade of ALSA, some saying to use OCC. I've tried both, but nothing seems to work.
I suspect it may have something to do with libjack0. I could not install jackd because it claimed libjack0 to be the wrong version, and for some reason I couldn't upgrade. So I uninstalled libjack0, then installed jackd, which automatically included the version of libjack0 it wanted. After that, I could get the JACK server running, but the computer had no sound.
I will post whatever logs or information necessary to troubleshoot, but I don't know exactly how or what to post. If you need logs, please tell me how to get them.
View 2 Replies
View Related
Sep 30, 2010
I have everything installed and Jack working fine. I'm in the user group and have realtime enabled and running. My problem is that I can't get my input (the guitar) through rakarrack and out. This is how it is set up:
Guitar is plugged in directly through the Input jack on the sound card (I have tried with the front input, rear, front mic, and rear mic inputs)
I have kde mixer set to allow pass-through of the sound from the input source (I can hear the guitar in my speakers, un-amplified directly from the source). The problem is that I cant get this source into rakarrack with jack to save my life. I have tried all sorts of combinations both physically with the audio jacks and in jack audio. Is that Jack isn't detecting the right input source with alsa or something?
View 3 Replies
View Related
Nov 1, 2010
I am not able to start JACK in realtime mode. This is a bummer. here is the error message I get:
p, li { white-space: pre-wrap; } 11:58:20.745 Patchbay deactivated.
11:58:20.746 Statistics reset.
11:58:20.812 ALSA connection graph change.
[code]...
View 1 Replies
View Related
Dec 4, 2010
I have a Dell Vostro 320 running Ubuntu 10.10. I can get sound through the onboard speakers but when I plug headphones into the jack, the onboard speakers mute (correct behaviour), but no sound comes from the headphones (incorrect behaviour). The headphones do work with other sound sources.I have made sure all the alsa drivers are up to date and correct and the system is seeing the sound card OK according to aplay -l:
The alsamixer run from the command line or Gnome shows "Master", "PCM", "Beep" and "Capture" all normal with nothing muted. The alsa-base.conf file has the following as the last line as per various posts that seem to have a fix for this problem:options snd-hda-intel model=dell-vostro position_fix=0 enable=yes.
View 3 Replies
View Related
