get jack to work with qsynth (or any app actually), but unfortunately, I could never manage to get it to play any sounds.
I have ubuntu 10.04
So I have decided to try jack2 out. What packages do I need to install to use jack2? Do I still use qjackctl and jackd?
I'm trying to build a system that uses jack2. So far as I can see, the jack version in Lenny repos is jack, rather than jack2. The jack website implies there is a .deb for jack2, but doesn't reveal how to access it. What should my next move be?
View 2 Replies View RelatedInstall multimedia plugin for browsers *and* keep firefox removed, is possible have such simple thing?
View 1 Replies View RelatedI set up up Ubuntu 10.04 Lucid on my desktop. Why can I not install multimedia support for common formats following the guide here?
I've added the medibuntu repo. I'm up to the part where it says "UBUNTU FAMILY 8.10 AND HIGHER USERS ONLY" and i'm following directions for "32-Bit Ubuntu Users". This is what I get when I paste the command in terminal:
[Code]...
It says "0 upgraded, 0 newly installed, 0 to remove", why am I being told this? If this guide is not for Lucid than what guide is?
How to install Multimedia Codecs under Lenny with Gnome?
View 3 Replies View RelatedI was using THIS guide to install restricted multimedia codecs. I got to the part where I had to switch system packages to the Packman packages. It came up with a number of dependency errors. I then had a stupid moment and told it to ignore the dependencies and break the applications. Now Xine won't even start, and Amarok seems to have disappeared on my computer. Oh and I also got a bunch of weird dependency problems when I was trying to install some of the packages from Packman too as listed on the guide. I also told it to ignore them when it couldn't find the dependencies. I'm scared I fudged multimedia up so badly I would have to do a clean install to get it back. BTW, I'm running openSUSE 11.2. I don't know if there are other specifications that matter.
View 4 Replies View Relatedi can't install multimedia codec, after installing i restart PC and then linux writes error kde4int i hadn't this error before, it begins after installing new monitor Samsung syncmaster B1940
View 9 Replies View RelatedI am trying to install missing codecs to my openSUSE 11.4.I found this.How to Install Multimedia Codecs in Linux - Softpedia.I downloaded file all-20110131.tar.bz2.There is no instructions where to download this file so i downloaded to /home/downloads.Before i use this i have a question - is this install all required codecs?I need codecs to play mkv, mp4, H264(x264), avi, no DVD
View 4 Replies View RelatedIv tried everything to install the codecs for my system, the one click install, the manual provided for by openSUSE but no luck. All the files were installed correctly but alas no file will play. I need a solid answer. I have 11.2 GNOME on a 32 bit processor
View 9 Replies View RelatedI install Mplayer from Install/Remove Software and I can't find it. I reinstall it but without any success.
View 9 Replies View RelatedI've been getting it up and running with Xubuntu. Xubuntu 9.10 just won't install--the screen goes blank and the computer locks up, with either the regular or the alternate install CD. I gather that this isn't an unknown issue in 9.10, so I'm installing 9.04 instead and I'll just wait until 10.04 comes out. Xubuntu 9.04 installs and runs like a charm.This is an HP Pavilion ze4125, with 768MB of RAM and an ATI Radeon IGP 320M video card. When I enter "sudo su -c "lspci | grep VGA", it returns "01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1".
So what I want to do now is install the best driver I can so I can make the most of the video card. XP let me use any number of high resolutions, but the Display icon in Xubuntu tops out at 1024x768. EnvyNG doesn't offer. anything compatible with my video card. I've tried installing ati-driver-installer-9-3-x86.x86_64 and ati-driver-installer-9-12-x86.x86_64, but both say "Extraction failed" (I was running them with gdm stopped).So, is there something specific I should be doing to get access to higher resolutions, or a driver I need to install? This is easy on my main computer, which has an NVidia card, so I can use the NVIDIA X Server Settings utility to adjust the resolution--but obviously this machine doesn't have an NVidia card.
How do I install a TV tuner RPC-TV-PCI-FM in Ubuntu 9.10?I searched on various forums, but I do not found, how to set this model of tv tuner.
View 4 Replies View RelatedA question from a true beginner - I want to watch clips but in order to do that i need WMP plugin - a popup with 3 additional plugins appeared, I chose 1 of them not knowing which is the right one... no success. I hoped to see the other 2 on next boot up but to no avail.
View 6 Replies View RelatedHaving had many problems with pulseaudio on a fresh karmic install, I followed some recommended instructions for removing pulse and using alsa (URL...). unfortunately, both pulse and alsa have gone and i'm left with oss which seems to work fine. I'd like to have alsa back though.When I open amarok, it plays the frst song on the playlist then pops up a series of 'could not initialise sound engine' messages, and crashes.
View 5 Replies View Relatedi find that i can no longer install dvd styler from the ubuntu software center.it tells me the Package dependencies cannot be resolved. so i go to synapic to see if i could install it there and it tells me Could Not mark all packages for installation or upgrade and it says in the box below dvdstyler: Depends: libavcodec-unstripped-52 but it is not going to be installed
View 1 Replies View RelatedHow to install a microphone on the system? I have a microphone but when I plug it in it is not seen by the system.
View 3 Replies View RelatedI see (been using Inkscape for couple of weeks now) that there are features that I want to harness in Inkscape 0.47. I have 0.46 on Ubuntu 9.04 in the "Ubuntu Ultimate flavour".Oh by the way, is 10.04 stable? I read that 9.10 wasn't as stable cause of new programs and software and stuff that I have no clue about (I just want linux to be my stable OS in the back ground that doesn't require to much tinkering from me). And having asked that, can I upgrade to 10.04 via an installation disk? I usually get my OS disks from...well, wont say there name otherwise I might be accused of advertising. (downloading installations is expansive with a 3G card until I get ADSL).
View 2 Replies View RelatedI followed the instructions at [url] and added the team-xbmc repository, and updated apt-get
Then I try sudo-apt-get install xbmc xbmc-standalone and see the following:
What can I do to install XBMC on Ubuntu 10.04?
How do I install a webcam? I have an usb Logitech Quickcam The program Cheese looks for a camera in "/dev/video0" but it is greyed-out
"lsusb" shows the following:
Bus 002 Device 005: ID 045e:00dd Microsoft Corp.
Bus 002 Device 004: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 002 Device 003: ID 046d:08f6 Logitech, Inc. QuickCam Messenger Plus
[code]....
How do I install the webcam so that it is recognized by programs? I'm using Ubuntu 10.04 Gnome 2.30.0
I am not able to install the Istanbul Desktop Session Recorder on to the new Ubuntu 10.04.
When I try to install it, I get the message as "Requires installation of untrusted packages"
What do I do to get this resolved.
I'm trying to install my camera software through cd/rom. When clicking install.exe i get the following error.
Archive: /media/CanonDC300W/setup.exe
[/media/CanonDC300W/setup.exe]
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /media/CanonDC300W/setup.exe or /media/CanonDC300W/setup.exe.zip, and cannot find /media/CanonDC300W/setup.exe.ZIP, period.
I have downloaded VLC Source : [URL]... But am unable to figure out the installation process,
View 6 Replies View RelatedBanshee 1.7.5 supports the ipod touch and iphone but i can not figure out how to get it on Ubuntu. Its not in synaptic yet and i can not compile from source because it always says
Quote:
configure: error: Package requirements (gstreamer-0.10 >= 0.10.12
gstreamer-base-0.10 >= 0.10.12
gstreamer-plugins-base-0.10 >= 0.10.12
gstreamer-controller-0.10 >= 0.10.12
[code]....
Alternatively, you may set the environment variables GST_CFLAGSand GST_LIBS to avoid the need to call pkg-config.
I have just installed Rhythmbox via Synaptic..All is fine, however, I noticed that it's showing release version 0.12.8. After checking out [url] I noticed there is a newer stable version available. I have downloaded the tar.gz file, and followed the instructions in the INSTALL file.
The first step is to, in terminal, run ./configure before attempting to MAKE/MAKE INSTALL (won't let me do it anyways)..I run .configure, and at the end, I get this error:
Code:
This is preventing me from moving on during the installation.
I have tried
Code:
And it cannot be found.I have search Synaptic for GTK+-2.0 (for starters) and nothing specific shows up..A LOT shows up, but I'm not sure if there is one specific item I should be downloading?
I went to the veetle website, downloaded the file, and then opened a terminal and entered "sh veetle-0.9.17-linux-install.sh"
View 2 Replies View Relatedhow to install cinelerra on 10.04? I need to record a video with sound.
View 3 Replies View RelatednVidia came out with new drivers yesterday that are not in the nvidia-current metapackage. I don't care what card you have, this module drives it. What worked for me may not necessarily work for everyone, as I am not an oracle with respect to your particular system configuration. This howto will be done in broad strokes. Down to business. For this howto, I will assume two things: first, that you download the nVidia installer to /home/username; second, that your prior setup was having nvidia-current installed! Things we want installed
Code:
build-essentials linux-headers-generic linux-source
Thing we do NOT want installed
Code:
xserver-xorg-video-nouveau
Paranoid stuff we'd like to do just in case the above doesn't work (as it did not for me): sudo gedit /etc/modprobe.d/blacklist.conf Somewhere in the file, add the line "blacklist nouveau" PRINT THESE INSTRUCTIONS NOW BEFORE YOU KILL YOUR X SERVER Now, I installed by doing (from my home user directory)
Code:
sudo stop gdm
sudo apt-get remove nvidia-current
sudo ./NVIDIA-Linux-x86_64-260.19.12.run -a
reboot
This stops the X server, removes the potentially conflicting current drivers you have, installs the new driver (and -a accepts the license agreement so that we don't get prompted), and reboots.If this does not work, you can rollback from a LiveCD or the recovery mode with (again, from your home user directory)
Code:
sudo ./NVIDIA-Linux-x86_64-260.19.12.run --uninstall
sudo apt-get install nvidia-current
reboot
I have 3 computers running Ubuntu 10.10 (2x regular Ubuntu, 1x Lubuntu) and I need VLC media player 1.0.6 (the version from Lucid). I cannot use the Maverick VLC player, I need an older one.What is the best way to install it? Is there a better option then installing it from source code?
View 9 Replies View RelatedI have downloaded Flashplayer from Adobe site in tar.gz format.When i extracted i got a libflashplayer.so file.I don't know how to install the libflashplayer.so file ..
View 9 Replies View RelatedI've found VLC to be the most difficult to understand by far. I've followed many guides on installing different versions and want to now try VLC 0.9.9, as I've read there's a chance this version might work for what I'm trying to do. I've followed a couple of guides to installing 0.9.9 that were written for 8.04 but am getting errors.
View 7 Replies View Related