When I hit play/pause in a flash video it seems to take about 2 seconds to register, I am using pulseaudio I guess, any idea why the flash audio would seem out of sync?
View 2 RepliesPlay a song in Amarok and then press the space bar to pause. Press the space bar again to resume and Amarok starts playing again with the status bar moving and the timer counting down, but no sound. If I move to the next song, sound starts working again. Or if I double click on a different song, sound works. If I use the xine backend, the problem goes away. I'm using Amarok-2.4 and KDE 4.6.1.
View 6 Replies View RelatedPlaying a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I'm using ALSA (mostly because of the fact that it performs best in lmms), but i can't have flash running while playing my NES emulator). i looked for libflashsupport in synaptic, but it's not there. How can i install it?
View 1 Replies View Related-Ubuntu 10.04 with MPlayer/Smplayer & VLC installed via the repos. -Installed the Ubuntu Restricted Extras package (everything except flash, extra fonts, & java) & w32codec packgae (medibuntu). -Computer in question is 800mhz Celeron, 256MB RAM & one of those basic Intel Integrated Graphics Chip. I'm having problems playing some video files. When trying to play these files with Smplayer, I get a blue screen but can still hear audio (default video output). After switching the video output to x11(slow), I can now see the picture but it's not playable (some video will show maybe one frame every 2 seconds, some video would play for half-a-second then just freeze). This happens mainly with large files (not 100% accurate, but in general files over 300MB).
Mplayer log gives the "Your system is too slow to play this file" & "Bad alloc:insufficient resources" messages. So I'm guessing this is not a codec problem, but a system resources problem? Is there any option, trick, tweaks, etc. I can use to play these problematic files or is it just not possible because of my system specifications? Is there a way I could tell mplayer to play these files with lower bitrates & resolution? Maybe this could reduce the resources needed to play?
I have an ATI 4650 HD and using flgrx via jockey, on 10.10.X becomes unresponsive when I play flash videos inside a browser. The image freezes, and the audio track loops, with a loop length of around 0.5 seconds. The only thing I can is reboot my computer. The xorg log file contains no indication that something went wrong. The last entries in it are the monitor display modes.
I cannot switch to the open source ATI driver, as my monitor screen goes blank after booting.I have tried a fresh system install, but that hasn't worked either.
I bought an LG external cd/dvd unit (model: GP08 ).
The problem is that I have no sound when playing DVDs. Everything else works fine. I installed libdvdcss (followed this link: https://help.ubuntu.com/community/Re...ts/PlayingDVDs) but still no sound on DVDs (the DVD works fine on a windows machine).
I have an Acer Aspire One with Karmic Koala.
I recently installed Ubuntu 10.10 AMD64 beta. After installing the flash player, everything worked fine. I installed a few updates, as well as Ubuntu Stuido from the synaptic package manager, and when I rebooted, I can't hear any sound from flash content displayed in Fire Fox. All other sounds work fine, and I made another user account as a test, and that account has full audio functionality, including flash...
View 5 Replies View Relatedwhenever i try to watch something on ..... and than i switch tabs for a moment. videos player becomes all gray. it happens on other video hosting sites to. what can be the cause or how to diagnose it
View 9 Replies View RelatedWhen I start my computer, my comp is set to require password everytime I start the computer. I am using Karmic with all the latest updates. One day, from the Login Screen itself, I selected the Power icon at the bottom right and selected Shut Down. But, from next boot, the login drum sound wouldnt play and even the african sound that comes after logging in wouldn't play. The african sound problem was solved when I noticed that my sound was muted by the GDM on shutdown. However, the drum sound still does not come. I think the solution it to change the volume before logging in.
View 5 Replies View Relatedwhen trying to play songs purchased off of iTunes I don't want to be limited to having to watch them through Virtualbox.how to get vlc or mplayer to play .mp4 videos in Ubuntu 9.10? I've got vlc 1.0 and trying to convert them using ffmpeg didn't work, I keep getting the following error.
swScaler: Unknown format is not supported as input pixel format
Cannot get resampling context
I've tried to look up different programs for this but can't find anything. I'd like to be able to open my recorder on Myspace for instance and capture any sound playing through my speakers. I used to have a little program for this, but its windows based and won't seem to install correctly in Wine.
View 5 Replies View RelatedI've installed kubuntu 10.04 recently. I'm following the guide at [URL] to set-up the system. I've installed the kubuntu-restricted-extras package however I do not get any sound while playing mp3s. The sound system is working as I get the kde tune when I start up. I have tried playing mp3s in amarok, audacious, kaffeine and vlc. None of them work.
I opened system settings -> multimedia. It shows four devices and only the one which says 'ALC883(analog)' works in all categories (notifications, music, video, etc etc) when I click test. However sometimes I get a notification saying that the device doesn't work.
Another thing I noticed was that the mp3s play when Dolphin shows a preview of the file when it is selected. I mean that there is a preview part in the right hand part of the window. When I press play there, the mp3s play. But there is no sound when I play movies and mp3s in amarok, audacious, vlc or kaffeine
The motherboard I'm using is Gigabyte M61PME-S2P. Its an nForce 430 motherboard with integrated graphics and sound.
Just like the title says, when I use mpd with pulseaudio, I get no sound but clients appear to be playing (ncmpcpp and gmpc). Other players such as vlc or mplayer work just fine. If I go under the mixer, I get "no application is currently playing or recording audio" under the "Applications" tab when playing through mpd. In contrast, when I'm using mplayer or vlc, both show up in that tab. It behaves as though pulse is simply not configured to work with mpd.Here is my config (edited out any commented line for brevity):
Code:
$ cat /etc/mpd.conf | sed '/#/d'
music_directory"/media/data/DM/Genre"
playlist_directory"/var/lib/mpd/playlists"
db_file"/var/lib/mpd/mpd.db"
[code]....
Flash was updated two days ago on my system:
Since then, I have been unable to get any sound out of flash. All other sound sources work fine.
when I use mpd with pulseaudio, I get no sound but clients appear to be playing (ncmpcpp and gmpc). Other players such as vlc or mplayer work just fine.If I go under the mixer, I get "no application is currently playing or recording audio" under the "Applications" tab when playing through mpd. In contrast, when I'm using mplayer or vlc, both show up in that tab. It behaves as though pulse is simply not configured to work with mpd.
View 3 Replies View RelatedI recently switched to Ubuntu 9.10 from Fedora 12 because it was giving me problems, but now I've run into some problems with Ubuntu. I really only use my computer for internet and music, and I'm not really able to listen to my music.My computer is an HP Pavillion dv7-3060US laptop, AMD 64bit processor, 4gb ram, ATI Mobility Radeon HD 4530 graphics chip and an ATI chipset (not sure which).
I have an altec lansing speaker configuration, with a built in subwoofer on the bottom. My problem comes that the sound is coming out of the subwoofer, not the actual speakers themself. When I try plugging in an external set of speakers, nothing happens, the sound still plays. Switching the device from "Interal audio analog stereo" to the other choices in my list does nothing (system>preferences>sound is the list im talking about)I'm able to hear music through my subwoofer when using totem music player, but neither rhythmbox nor amarok play any music. amarok doesn't play at all, and rhythm box shows the music is loaded but no sound comes out and it looks like its playing it at 2x speed.
I've attempted to follow the comprehensive audio problems guide here but I get to step 3 and the website isnt the same, so I can't continue.These are the outputs from the first few steps:
Code:
aplay -l
root@kadar-laptop:/home/kadar# aplay -l
[code]....
This is true for .flv, .avi, .mov, and .mp4, at least. This is true in both vlc and movie player. Thumbnails generated from frames in the videos appear correctly in nautilus. Videos play fine in firefox, on ....., but I downloaded one as an .flv and then it had the same problem. I have restricted extras freshly installed. My "Ubuntu 9.10 - the Karmic Koala" system is fully updated. I've found several other forum posts about the same kind of problem, but I couldn't find anything helpful in them (like that the contrast setting might be WAY out of whack, which it wasn't, or that nvidia drivers needed to be updated or reinstalled, which I don't have anyway, etc).
View 2 Replies View RelatedI am getting horrid sound distortions whenever I try to play a dvd. The video will play, but there are frequent popping and squeaking sounds. This problem does not appear when playing saved avi files. I have tried both movie player and vlc, getting the same effect. It does not seem to be a hardware problem, as it does not appear when running windows on the same machine. Nor was this a problem on this hardware using earlier versions of Ubuntu. Changing dvd's, using a different dvd drive, even ripping a dvd to an iso and playing the iso with vlc did not help.
View 1 Replies View RelatedI'm having sound problems. I get sound but it sounds horrible. It seems to be worse when i'm playing something in xbmc. When i type this command
[Code]...
i use Ubuntu Lucid Lynx, 10.04 64bit I recently updated ALSA Drivers to the latest ones.. (Still the problem described bellow exists) This is my ALSA Information from the script. [URL]
When ever i'm playing a file in any player, Rhythmbox, Exaile, Totem... and i mean a sound file, i can't listen to my 5.1. Actually... when ever i choose from Sound Preferences -> Output -> Profile: 5.1 I can listen to the Bass kicking, and all my speakers works. Now, when i change manually the song, or automatically... or even when i Stop and then Start again the playback, i loose the Bass and not all my speakers works as intended. When i go to Output Profile again, 5.1 it's still selected. I have to change back to something else, like 4.1 or stereo and then back to 5.1 so the Bass and all speakers work again as they should.
I have a set of i.Tech BluePro headphones and a Motorola USB adapter, my aim is to listen to music from my laptop through the headphones. I have successfully set up the bluetooth device with the Bluetooth preferences utility, it is detected and paired but how do I get the computer to direct its sound to this device? the sound preferences do not list my bluetooth device. The only reference to this task I have come across is here; [URL] not sure if this is relevant for 10.10, but when I try hcitool scan. Nothing is detected.
View 1 Replies View Relatedthe sound stops while playing music or movies and can't be restartet. I already upgraded alsa to 1.0.24.2. I managed to fix the problem somehow after hours of deinstalling and reinstalling alsa and trying loads of things, but I did not really find the cause of the problem.
View 5 Replies View RelatedI upgraded to Ubuntu 9.10 recently to find that my computer will not play mp3 files in Rythmbox, Amarok, or Kaffeine media players. All of the FLAC files I have ripped from CDs work, but no mp3 files work. I have downloaded and installed the ubuntu restricted codecs from Synaptic as well as the codecs prompted by Rythmbox rebooted, and still no result.Like I said, the .FLACs play fine.On another note, no sound is being transmitted to my earbuds. The only sound will come from the laptop speakers.
View 4 Replies View RelatedThe sound doesn't play through the main speakers, but instead plays through the subwoofer on the bottom of the laptop. The headphone/mic jacks don't work either. I've listed the relevant lspci -v code in my other thread, but I'm not sure what other information is needed (like I'm trying to find the exact sound card I have so I can google around for a solution but since everything in laptops is so specialized I don't really know what to look for).
I do apologize if this question has somehow been answered elsewhere but I've waited 2+ weeks for a response and have gotten nothing. Also, I tried following this sticky thread but the link it refers to in step (3) under general help does not work, so I cannot proceed with any of the directions.
I am anxious to resolve this problem as I just discovered compiz-fusion and it just makes it even more fun to be loaded into my Ubuntu install, and I'm anxious to make the full-time transition to Ubuntu but I won't be able to do that if I can't play music.
I'm running Lucid 10.04, kernel 2.6.32-26, 64-bit, Intel 3400 series chipset. Whenever I run Hedgewars and The Mana World, the volume fluctuates really fast, and the sound applet flashes. Then the mouse pointer freezes up for a second, then moves really slowly. Once I quit the game, everything returns to normal. I've tried disabling desktop effects, changing game settings,
View 1 Replies View RelatedAs the title implies, the sound on my rig stops working after a while. Annoying as hell: I have to reboot my machine to get it to work again, which means that I have to reset my entire programming environment (with five full workspaces). I'm running 9.10 Karmic.
View 1 Replies View RelatedI don't understand what is going on... If I listen music, the sounds quality is just perfect, but if I play quakelive, I start heard some annoying noises such as my headphone wire is damaged. how to remove it? Maybe something wrong with sound drivers? I use ubuntu 10.04 LTS version OS. Sound card is realtek (integrated to motherboard).
View 2 Replies View Relatedthe flac decoder in 11.1 Amarok Playing my CD rips (flac) in Amarok has issues with something like skips. little short dropouts in the sound. Using Suse 10.3 (still on the box) does not have this issue. System: Suse 11.1, KDE 3.5 recent install and update. 32 bit on 32 bit platform, old Athlon 2500+ Asus MB, 1 GB ram, two 120 GB internal, Audigy SC.
[Code]....
There is no sound when playing avi files in XBMC.The videos play fine & there is sounds in menu.When i switch to Root the movies have sound,so whats wrong here?
View 9 Replies View Related