Anyone here have a good solution for individually controlling sound output without relying on that individual programs audio settings? For example:I am writing a paper while listening to some nice creative commons jamendo music, and I have to look something up online - I don't want to hear random audio/video advertisements.
or I get a VoIP call and I want that program to continue with sound, but want to mute my 8bit sequencer and whatever else.
In sound control, the bar that shows your volume level has a mark about 75% across that signifies your max volume without digital amplification.[URL] If you drag the settings dongle to the right of that mark, your volume does get louder, but I cannot achieve that effect via my usual keyboard shortcuts (e.g. F8-for-volume-down, F9-for-volume-up). They stop increasing volume at that artificial 100% mark, they do not digitally amplify as I want them to. As a result, every time I want to amplify my volume, I am forced to go all the way into sound control, which (to me) is dumb. Is there a way to set the 100% mark at the ACTUAL far right of the control bar, instead of 75% across, so that my keyboard shortcuts blend right from analog-max to amplification?
In sound control, the bar that shows your volume level has a mark about 75% across that signifies your max volume without digital amplification. (pic: URL...) If you drag the settings dongle to the right of that mark, your volume does get louder, but I cannot achieve that effect via my usual keyboard shortcuts (e.g. F8-for-volume-down, F9-for-volume-up). They stop increasing volume at that artificial 100% mark, they do not digitally amplify as I want them to.
Is there a way to set the 100% mark at the ACTUAL far right of the control bar, instead of 75% across, so that my keyboard shortcuts blend right from analog-max to amplification? (Or is there any other way to achieve a similar effect?)
why is there two different buttons to do the same job? i made the default sound device creative x-fi with the kmix in the right hand corner but i still couldnt hear any sound. i then found out from another forum thread in this forum that to change the default sound device you have to go through yast. it works now but it is confusing. same for networking. network manager is installed by default in 11.4 but if you click on the icon in kde tray it says no network interfaces found. you then have to go to yast,network and click the radio box for network manager then click on ok. i hope in future releases of opensuse there will be one way to change the defaults.
Since I upgraded my kernel to 2.6.31-18 I have been experiencing problems with my sound. 2.6.31-18 sound problems with nvidia MCP72XE/MCP72P/MCP78U/MCP78SThe laptop speakers no longer shut off when plugging in headphones. My sound control applet no longer appears in the panel. When launching a sound application sound starts off real loud for a second and then changes to much quieter. I have had this laptop since Hardy with never any sound issues. I do not know if it is the kernel upgrade or the accompanying backports modules. Could be neither for all I know and it just started around that time and is a coincidence.
Here is what was installed: Installed the following packages: linux-backports-modules-alsa-2.6.31-18-generic (2.6.31-18.20) linux-headers-2.6.31-18 (2.6.31-18.55) linux-headers-2.6.31-18-generic (2.6.31-18.55) linux-image-2.6.31-18-generic (2.6.31-18.55)
Does anybody know if it's possible to get the volume control knob (the one on the device) on the USB Creative Sound Blaster X-Fi device in Ubuntu 10.4? The sound is working great for me, but I actually bought it mostly for the volume so I'm hoping there's a way to fix it before I return it.
I'm not able to hear any sounds from my system. The panel does not have the volume control button anymore. I'm not able to run System -> Preferences -> Sound. I get an error saying "Waiting for sound system to respond" And if I run 'pavucontrol' in the terminal, I get "Connection failed: Connection refused"
Also recently I've noticed that when I run some commands in the terminal I often get this message "Home directory /root not ours." Can this be related to the sound problem? I am on the system as root.
I have a laptop DELL Latitude D600. The sounds works great and I can control it with the laptop buttons (increase/decrease/mute volume).
I just upgraded to Ubuntu 10.04. In prior versions, I could control independently the volume for the speakers and for the headphones. And I was able to "join" them together so that when I increase the volume, it increases in both.
Now in 10.04 I can't find where to join them. But that's fine. The problem I have now is that the volume for the headphones seems to be a 10x multiplier of the "master" volume. For example, in order to hear "normal" on the headphones, the master volume has to be almost on mute. If I increase to 1/4 of the way out, the sound is too loud for a human being.
I went to alsamixer to see what's going on and started with everything at 0.
So I put my mouse on top of the volume control on the taskbar and with one "click" on the wheel (to increase volume) I get this code...
That's just one 'click' of the wheel... and the volume control shows almost nothing on the volume bar (the tooltip says Output: 5% -75.70 dB.
In the past the 5% gain in the output was proportional for the headphones. But now it's multiplied by a lot. This makes the volume control useless when using headphones. I have to go to alsamixer to adjust manually.
And to top it off, the new Ubuntu doesn't have the "old" volume control where you can see the level of each output element.
Laptop is Dell Latitude C600/C500 with Pentium III 850Mhz, 256Kb L2 Cache, 256MB RAM, ATI M3 video card, HD 20005 MB and sound card is EES Maestro 3i. After trying to do something with Windows 2000 which was installed on the machine, I decided to put Linux without keeping windows on the machine. First I try with Xubuntu (latest version) which was working but slowly, then I found that Debian could work fine on that machine. I have installed latest version 5.08 and was surprised how goodly old machine can work. I solved problems with screen resolution (change from 800x600 to 1024x768) but I couldn't find solution how to fix problem with sound.
Actually I don't have sound on the machine. I looked for a linux driver for that sound card and Dell is only providing windows drivers. Then I found that I can solve the problem with ALSA drivers but I couldn't find the easy way (or any way at all) to install drivers and to get back the sound. When I click on 'Volume Control' (top right corner of the screen) I get the message: 'Volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured.'
Can someone recommend a good app to monitor the OUTPUT of my soundcard? I don't just want to look at the VU meter of my music player - i actually want to see what the soundcard is outputting. Windows drivers for my soundcard (Audiophile 192) had this ability, but I'm not sure what software to use in Linux.
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
I have sound on my main speakers and I can control volume from the desktop's icon tray volume control on the screen.However, my headphones were working just fine until all of a sudden they just stopped working. I tried other headphones but no change.Also, my volume control on my keyboard suddenly stopped working too.Any ideas how I can get the headphones and keyboard volume control working again?
Any of you have tested bluepad on kubuntu 8.04? I'm trying to control Linux from my mobile with bluedpad, but crashes with kde (suppose works with gnome?). Else, can you tell me other programs?
I recently updated my ALSA drivers to 1.0.23 and I am also running the latest version of flash (v10) and I'm having problems with sound. When I open a flash video in any browser i cannot control the volume from the master volume control. the application does not even show up under the applications tab in the volume control. I'm sick of loading flash videos with sound being turned up all the way.
ive had it for about a week, and I have a problem, yesterday I could see the little volume control icon and use it to control volume but i must have accidently clicked something caus now its not there.
I have lirc but I haven't got the hang of it yet. Ive have made a lircmap.xml and put that file in /.xbmc/userdata but xbmc still doesn't respond to it. I have even tried /.xbmc/userdata/keymaps and nothing. You can say that I have lost faith in lirc. I there a program that can translate remote control signals to regular keyboard letters?
Today I updated using yum there was a update to something called control- center (2 updates for this) It said it was for changing fonts backgrounds, themes etc... is this just a update for systems settings or tweak tool or a new program? I know I cant change themes in System Settings so what is this...Anyone download this today? I cant find a new application.
I upgrade from 10.04 to 10.10 and now my sound control buttons on the key board don't work
I have dell inspiron 600m with xubuntu 10.10 with the latest updates.
I do have sound when I click on the sound indicter on the top right it brings me to the mixer where I could adjust the sound by clicking and dragging the slider up or down.
In Fedora 12, I am trying to use a program that uses uinput to inject mouse events to control X applications. This worked with Fedora 9, but doesn't with Fedora 12. I see the following in my Xorg.0.log:
(II) config/hal: Adding input device Prototype IRPointer Device (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.7.1, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0
[Code]...
The device is not a synaptics touchpad, and so the X load of the driver is incorrect. But I don't know how to get X to ignore it's own driver and use evdev. (Or even if that's the right thing.) A general explanation of how hal and evdev are related, for the current X server,
I bought a Toshiba Nb205 laptop with a Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) inside. After I first got it I installed Ubuntu onto it, and that's where the problems started. After everything was installed I noticed that my sound doesn't work. So I looked everywhere. I tried so many solutions offered on these forums including messing around with Alsamixer and nothing seemed to be working. Then one day I luckily stumbled upon this website that directed me here: [URL] So I went there and picked the Linux 2.6(X86)(DEB) from the drop down list and installed it. I rebooted my machine, and I now had sound.
However, the only problem is that I can't control the volume of the sound. When I play something, it stays at one volume and one volume only. Nothing on sound preferences will work. The only way I can raise or lower the volume is if I do it in the application that I run, like if I am playing a ..... video, I have to use their volume control to control the volume. My master volume won't work at all.
Since doing an upgrade from Koala to Lynx, my volume control (up in the top right corner of the screen) has vanished. I can still mute and control volume by going into the Sound menu in Preferences, but I really miss having it on the taskbar.
the sound preferences menu, the one that's achieved by system>preferences>sound is completely gone, and so is the volume control that amarok/rhythmnbox connect too, that has that shortcut link to the sound preferences?
after installing trying to install veetle on my ubuntu 10.04 64 bit I always get the message at the start-up:could not update /home/user/.ICEauthority.my sound control does not work anymore (message: 'waiting for sound system to respond')using Krusader I get the message 'Cannot talk to klauncher: The name org.kde. klauncher was not provided by any .service files.I checked the owner of .ICEauthority and the permission and they are OK. Same for my /home. None of the suggestions found in the other threads worked.Veetle has been installed using the install.sh script and there is no unistall option
Using Natty Narwhal, sound works, but the icon disappeared up in the panel. Not that big a deal, other than it shouldn't have happened, so its go t me curious.
my issue is as my Title "Lost Top Sound Icon & Can't control volume with Keyboard" OS: Ubutnu 9.10 x64 - Karmic Koala Lost the Top Panel Sound Icon, I even go to: System > Preferences > Sound Message Pops Up: Waiting for sound system to respond
Funny thing I do get Ubuntu OS Audio sounds Now as well I lost control of my Volume with my Keyboard, pretty sure it has to do with the same Sound icon in the Top panel that is missing The only way I can control Audio is Manually using: gnome-alsamixer 0.9.7
It sucks big time, because I can't control my Audio when ever I need to mute it or upper/lower it through my keyboard fastly when needed. having to manually opening an application to be able to change/control the Audio volume is a huge hassle for me
I have Ubuntu 9.10. I was having trouble with sound in Skype. So I read on the forum that I needed to replace pulseaudio with esound, more or less as described here:
[URL]
I did that and skype is working!
But now there's no more sound control on the panel. It doesn't offer a sound control when I right click and look through "add to menu". I saw a post that said that the sound control would appear in the "indicator applet" on the the panel, but that didn't work.
Preferences--sound gives me a message "waiting for sound system to respond." The solutions that I've read on forums seem to imply that I need to reinstall pulseaudio. But that will bring me back to my original problem with Skype.Do I need to upgrade to the new version of Ubuntu to fix it? I hadn't upgraded because I've been told the newer version is a bit slower.
My microphone wasn't working so I entered alsamixer to amp up it's volume and see what's wrong.Not sure what I did wrong but now the gnome volume control applet in the Indicator does not affect system volume at all.I can even mute it and it will not mute anything.The volume controls in alsamixer work fine and changing the volume in alsamixer affect system volume immediately.What could I have done? How can I get back volume control inside gnome?
