Ubuntu Multimedia :: Block Seek Error With Particular DVD
May 26, 2011
I'm trying to troubleshoot a block seek error with a particular DVD (most DVDs work with my computer, just a random few that fail). The failure is (I presume) caused by incorrect information on the DVD itself to try to fool unlicensed players. I get a libdvdread error "Can't seek to block ...". I have traced this error message to three sources in dvd_reader.c. I have modified the error message so that it also prints the file name and the line, but I am having such a hell of a time trying to compile libdvdread. I have installed libdvdcss2-dev, and most of the other obvious development packages. However, the instructions for compiling lindvdread make no sense (I am assuming they want me to run the 'configure2' script here) and it is throwing up all kind of weird compiler errors. This can obviously be compiled somewhere for a binary package to exist. How this is done?
View 1 Replies
ADVERTISEMENT
Apr 2, 2011
When playing a song, I am unable to manipulate the seek bar and skip to&fro, it's seems absolutely except for the fact the cursors (if that's the right word for it) glows, and it says "Jump to XXX" but it does nothing. This pretty much happens on any and every song, however if I play another track come back it may or may not work. Sometimes it works fine (usually not), but it'll freeze again after the track changes.
View 7 Replies
View Related
Feb 16, 2010
I am using Ubuntu 9.04 (Jaunty Jackalope) along with Windows XP.
When I play mp3 files in Rhythmbox, it plays fine. But it's seek bar is freezed ie, seems like it is disabled. Anyone knows how to enable it.
My System config is:
Pentium 4 3.0 GHz
512 MB RAM,
250 GB HDD,
Intel Motherboard
View 2 Replies
View Related
Jul 1, 2011
Using Ubuntu 11.04, Totem (the default media player) is not able to seek (read: to forward or go back in time) whenever the file is read from a mounted ISO archive.
Whenever I extract individual media files from such an archive, the seek bar at the bottom works as it should. Thus, it can be ascertained that it is not the media files that are the source of the problem, here.
why that is doing so? Sounds like a bug, or what?
View 6 Replies
View Related
Apr 4, 2010
I just fired up Rhythmbox and threw all my MP3s into it.. but whilst it plays files, the slider bar just refuses to move, so there is no way to seek through an mp3.
How can I fix this? It's kinda useless without seeking for me.. all those long mixes.
View 8 Replies
View Related
Jul 4, 2010
Several times and several machines the debian installer complained that it cannot find the DVD-ISO image when my installation via usb and hdd ways)(i.e. Have the installer to seek iso image in usb flash or from hard disk). How does the installer seek the ISO? I'd like to know why sometimes it would fail to find that one(but they do exist) and sometimes the installer find it perfectly. Currently I am not able to read the source code of the installer.
View 2 Replies
View Related
Oct 31, 2010
Whenever i execute command fdisk /dev/loop0 < file1 (file1 contains the commands used for fdisk),I get an error saying "unable to seek on /dev/loop0".The last line of file1 contains w in order to write the partition table back to the disc. How should I exit the command prompt safely (after saving all the settings) Below are the contents of the file
[code]...
View 2 Replies
View Related
Jun 24, 2009
Im running Fedora 11 x86_64. I enabled the rpmfusion repositories (free & non-free) and opened an MP3. The codecs installed correctly, but when I play them in either rhythmnox or totem, it plays but there are issues. Oddly, it depends on whether I ripped the mp3 myself (on Fedora 10, 196kbps CBR) or bought (play.com, 320kbps CBR).For the bought mp3s, the track length is displayed and the progress bar fills as the song progresses, but I cant skip to another part of the song. For the ripped mp3s, the player thinks it is streaming (track length unknown).
I thought it might be due to using ext4, but this happens even if i play them off an ext3 partition. The mp3s themselves are fine - they play perfectly in Ubuntu and WIndows.
View 5 Replies
View Related
Jun 12, 2011
Im running ubuntu 10.04 and I cannot get ipblock to update its lists. I've checked the ipblock.lists and the urls listed are working. When I go to update it gives me a different error code each time for the lists. Ipblock will load up and work but not with updated lists,
View 3 Replies
View Related
Aug 21, 2009
I like to autohide my panel. But for some reason, it won't show unless I mouse over one of the bottom corners of the screen. The whole bottom edge where the panel hides should summon it if I mouse over, and I have been able to do this before, but now, after a system update, it only appears when I mouse over those bottom two corners. Does anyone else get this, or know how to fix it?
View 9 Replies
View Related
Jul 14, 2010
the seek button in all videos played (including videos videos as well as video playback from files stored on disk) oesn't work.tried removing/installing totem, with gstreamer/xine and the problem still persists.also, videos streamed become blank, that is, they cease to display halfway through playback.the seek feature on all playable videos doesn't work.
View 1 Replies
View Related
Jan 13, 2011
i have a inspiron 1520 laptop which is starting to slow down some so i thought linux would help because all i do is internet use, so i download it from another computer and mount it to a usb flash drive like the site says, (netbook remix latest version) then i put it in my laptop and it loads all the way and i press try and after about 10 minutes of loading it lets me try. so that was ok really slow but i thought id install it to hard drive to see if it improved speed. so the next time i start my laptop i get Buffer i/o error on device loop0 logical block xxxxxx so i redo the usbflashdrive no errors switch usb ports and same thing, ive done the switch usb ports and redo the flash drive about 4 times im really getting mad at linux before i even have it installed.
View 1 Replies
View Related
May 4, 2011
I'm running 11.04 off of a 32gb flash drive. Something about grub on my install is messed up. When trying to boot after a normal shutdown, I get the following errors.
error: invalid environment block
error: invalid arch independent ELF magic
I think something about grubenv under /boot/grub is being corrupted. Loggin in under Ubuntu 10, I can make my way to the files on the 11.04 flash drive and issue the following commands to make it boot normally [URL]... file corruption happening? How can I fix it?
View 2 Replies
View Related
Feb 24, 2010
Some times I boot up, and udev has labelled what is usually eth0 as eth1. Of course, my rc.inet1.conf is configured for seeing internet at eth0, so no connection, quite obviously. Then I reboot and the device label is back to "eth0". Actually I'm still not able to get connected, even at eth0, despite my nameservers being OK, and the default route gateway being all OK. PS. I have a static ip address.
View 3 Replies
View Related
Apr 25, 2010
I created LVM and formatted it. But at the time of mounting it getting this error message ".....not a block device".
View 3 Replies
View Related
Nov 10, 2010
I created a start up USB and I try to install it on a computer I have, however, everytime I try I get the following error repeated...
[35.877830] end_request: I/O error, dev fd0, sector 0
[35.877869] Buffer I/O error on device fd0, logical block 0
emulate the USB using the force FDD option. I tried emulating a hard drive instead but then it doesn't boot up into ubuntu.
View 5 Replies
View Related
Jan 2, 2010
I am having a problem in Amarok. Recently I am using the following version of the software:
Code:Amarok Version 2.2.0 Using KDE 4.3.2 (KDE 4.3.2) The problem is that the seek bar is not working.Whenever I play an audio file the seek bar advances to show the progress. However, when i try to drive that seek bar manually with my mouse there is no effect. As i result I can't go to the desired position as I want.
View 4 Replies
View Related
Jul 4, 2011
I am trying to debug the issue of a desktop that has for the last two weeks started having kernel panics at boot time. This machine has been running flawlessly for the last 8 years, and has had three OS upgrades. I am using memtest to try to understand the issue. The following is part of the memtest output: Reading all physical volumes Buffer I/O error device hdc logical block 0 Buffer I/O error device hdc logical block 15
Illegal node for this track or incompatible media (asc=0x64 ascq=0x00) The failed "Read 10" packet command was /dev/hdc: read failed after 0 of 4096 at 0 Input/output error and similar set of mesaages After this udev checks correctly, and hardware, storage and audio are initialized However sometime in the middle of the boot process, a kernel panic occurs with message Kernel panic -- not symcing : Fatal exception in interrupt
View 4 Replies
View Related
Jan 22, 2010
i am writing sample block driver while reading data i am getting below error
i am not getting what is this error
BUG: sleeping function called from invalid context at kernel/sched.c:4684 in_atomic():0, irqs_disabled():1
Pid: 5364, comm: test_buf Not tainted 2.6.27.42 #1
[<c041f1d4>] __might_sleep+0xae/0xb3
[<c063ae43>] wait_for_common+0x1f/0x117
[Code]....
View 5 Replies
View Related
Apr 5, 2010
I'm trying to install Kubuntu on an old Windows system. I am getting tons of errors such as:
I/O error
SQUASHFS error:unable to read page, block XXXXXX
SQUASHFS error: unable to read fragment cache block
It then reports that it's loading ACPI modules and starting the ACPI services, starting the system log daemon, doing Wacom setup, starting kernel log daemon.....and then it reads sb_bread failed reading block umptysquat.I have a feeling that this hard drive is toast. I can't get it to install Windoze or Linux. I can't even get a prompt so I can do a low-level format. Unfortunately, I'm not super savvy with Linux and don't know what to do next.
View 2 Replies
View Related
Sep 23, 2015
Just installed Debian 8 last night and trying to run one a few of my scripts that use easygui (a front-end for python-tk basically) and I keep getting alloc: invalid block any time a file or folder selection dialog is presented. I'm able to select a file/folder with no issues, but once the dialog closes I get a variation of what appears to be a memory error followed by alloc: invalid block.
Here's one of my scripts that does it. This one pops up a file selection dialog pretty early on to ask for a file to check, and as soon as I select any file the dialog closes and that error appears in the terminal. It happens whether I run it with Python 2 or Python 3. You will need to install python3-easygui for this script to run properly if you want to check for yourself what happens. This is a first time encountering this error for me.
View 1 Replies
View Related
Nov 28, 2009
I have 2 hdds, with encrypted / and /home. Besides there are four other (encrypted ext4) partitions I use rarely. In Fedora 11 at boottime I gave the luks passphrase for / and home and the system booted as intended.
Whenever I needed those extra encrypted partitions I mounted them in Nautilus. Now, in Fedora 12 at boottime dracut tries to open all the encrypted partitions, / and /home are mounted fine, but opening all the other partitions gave the following messages in messages.log:
Quote:
dracut: luksOpen /dev/sdb6 luks-02a0e706-a26f-4019-a2a0-88a0366a994d
kernel: Buffer I/O error on device dm-0, logical block 124
kernel: device-mapper: ioctl: unable to remove open device temporary-cryptsetup-304
kernel: Buffer I/O error on device dm-0, logical block 124
kernel: Buffer I/O error on device dm-0, logical block 124
[code]....
...and these messages are repeated with the other partiitions, and the boot time takes very, very long. How can I tell dracut to ignore those extra encrypted partitions at boottime?
View 8 Replies
View Related
Nov 18, 2010
I'm trying to upgrade my kernel. When i get to the step where i should build the img for grub (i guess the command below is doing that) I get this error: yaird error: bad device link in /sys/block/sda (fatal)Since I installed debian using a USB drive, HDD1 was /dev/sdb and HDD2 was /dev/sdc, the USB was /dev/sda. Is there a way to force mkinitrd.yaird to build the img for /dev/sdb?
View 1 Replies
View Related
Dec 27, 2010
my server is fedora-7 and it was working fine till yesterday yester I have power failu problem after we got problem. while booting following error coming Inode 3640928 has a bad extended atribute block
View 1 Replies
View Related
Feb 8, 2011
I am using Wind River Linux- 2.6.27.18-WR3.0bg_standard. The problem is whenever I execute "reboot, ls, cd" and many other commands the OS prompts me an error-
"end request: i/o error, dev sda, sector "(different sector each time)" and
EXT3-fs error (device sda1):ext3_get_inode_loc:unable to read inode block- inode-4088001, block-4097027
I also executed "dmesg", it also showed similar errors. Has the disk gone bad or the kernel is corrupted?
View 3 Replies
View Related
May 20, 2009
I had installed the CENT OS 5.3 it is installed when i rebooted it gives me error continuously.
Buffer I/O Error on device sda, Logical Block 0
ata4.00 : exception Emask 0x0 SAct 0x0 action 0x0 frozen ......
ata4.00 : status: { DRDY }
why it has giving the error.i have Intel based hardware Core II Duo with 1 GB ram check with sata hard drive 120 GB.
View 1 Replies
View Related
Sep 4, 2009
I just downloaded an iso of the latest CentOS dist (5.3) and burned it to disk. I booted from the CD and received the following error:
Memory for crash kernel (0x0 to 0x0) not within permissible range
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq-0x00)
The failed "read 10" packet command was:
Buffer I/O error on device hdd, logical block 176935
(This error message repeats for another 9 or 10 times then it says the following)
Red Hat nash version 5.1.19.6 starting
Setting up new root fs
(Then there are some unmounts which are old /dev, /proc, /sys. At this point a series of steps begin).
Setting Clock
Starting udev
Loading default keymap (us)
Setting hostname local host.localdomain
Setting up logical volume management
Checking file systems
These are just some of the steps that appear after the above error is displayed, all of the steps that load have an ok status. After those are completed I get to a text prompt - localhost login: At this point my keyboard does not seem to respond, pressing enter or any of the other keys seems to have no effect. I noticed that during the load process I could toggle the light for caps and num lock, but at the login screen it does'nt work. So at this point I'm not sure if I'm having a technical issue or if its just another case of an user error.
View 11 Replies
View Related
Sep 13, 2011
I virtualized a PC with VMware vCenter Converter. But when I boot my virtual PC, I have an error.I found this link but I can't mount /dev, /sys and /proc. I have this error message : mount: /dev is not a block device.
View 2 Replies
View Related
Jan 29, 2009
Create symlink /dev/root and then exit this to continue the boot sequence.
Buffer I/O error on device sr0, logical block *******
sr 4:0:0:0 [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 4:0:0:0 [sr0] Sense Key : Medium Error [current]
sr 4:0:0:0 [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
end_request: I/O error, dev sr0, sector 1395920
Clocksource tsc unstable (delta = -499902943 ns)
loops that during install. new hard drive fresh out of box. WD 320GB 7200 Toshiba Qosmio intell core duo i've installed with this same disk before previous hard drive died. installed over windows vista. this time im trying to install solo no windows disk to reinstall with, F10 only. I've tried other distros as well, Mandriva one 2009, Dreamlinux, and this one. i've suspected hard drive controller went out but i can format and partition the drive. also the cd/dvd drive is bad but im booting from cd fine. tried removing the cd drive and booting from an external usb cd rom, same errors.
im about to deploy and need my computer up and running ASAP. 7 months no entertainment is not good. when i use a linux boot disk from Ultimate Boot Disk (UBD) i get an error of - hda status no response and something about invalid heads dreamlinux pushes past the error till i get the error about cant start x server. about my graphics
View 1 Replies
View Related
Dec 27, 2010
I have installed a fresh copy of FC14 and when I logged in locally for the first time I was getting the error messages below. Now these same messages are filling up my messages log and it's running non stop in the background. Has anyone seen anything on this error? I have searched through Google looking for help and I'm not finding much.
This box is a simple file/web server with no monitor hooked up and no GUI. I have also included the lspci ouput below if that might help. Really looking for any suggestions or input on how I might stop the error reporting since is filling up my log files quickly.
[Code]....
View 2 Replies
View Related
