Ubuntu Multimedia :: Adobe 10.1 Beta In System Now Supports Hardware Acceleration?
Aug 28, 2010
Out of curiosity I was wondering if adobe 10.1 beta in Linux now supports hardware acceleration?
Most of my googles on this topic refer me to comments made years ago.
If the adobe player still doesn't support hardware acceleration has any open source player provided support yet?
View 3 Replies
ADVERTISEMENT
Mar 6, 2011
I've been trying to get hardware acceleration (Direct Rendering) working on my system without success. I'm not even sure if my card supports DR or not, my searchs haven't turned up a result for this question. I don't know if its the video card, nvidia packages or bad configurations. Any help with the diagnosis?
Distro: Debian Lenny
Kernel: 2.6.26-2-686
VideoCard: nVidia Corp. NV44 GeForce 6200 TurboCache(TM)
nVidia-kernel-2.6.26-2-686 v.173.14.09
nVidia-glx v.173.14.09-05
View 1 Replies
View Related
Feb 18, 2010
Why is everything with this ubuntu so complex and difficult? This operating system turns the act of installing/uninstalling into a huge task. Just yesterday I installed the beta release of flash 10.1, I thought that it went into my firefox folder, but I checked firefox 3.5.7 plugins and it isn't there. So my question is, where on earth could it have possibly gone? Terminal said that it installed somewhere on my home directory, but I've been searching everywhere and I can't find anything. I know it's there because videos require flash work. where is my home directory, and what is it? I'm using ubuntu 9.10.
View 5 Replies
View Related
May 5, 2011
i've a system relies on Linux version 2.6 i need to add a usb camera for this system as it supports somekind of cams wich i doesn't need .shall i need to add module & driver & may HAL and recompile kernel again !? i'm using ubuntu10.10 which i use it to recompile kernel for this system
View 6 Replies
View Related
Jul 4, 2011
I downloaded Adobe Air, both the rpm and the .bin versions. First I tried the rpm, it went through the motions of installing but just disappeared. then I tied the .bin, got tot the installer, accepted the license, entered my root password, but it stopped installing with "an error occurred. Adobe AIR could not be installed. Install either Gnome Keyring or KDE KWallet before installing Adobe AIR". I opened Kwallet and tried again, but to no avail. I am running OS11.4 64 bit. What can I do to get this thing working?
View 6 Replies
View Related
Dec 8, 2010
I want to buy a gprs modem which supports linux, which brand is better?
View 5 Replies
View Related
Jun 4, 2009
Does anyone know if hp thin client linux version supports desktop icons?
View 3 Replies
View Related
Dec 30, 2010
how Xrandr supports Dual screens. I am attempting to setup Dual Screens on a Ubuntu 10.10 System with an ATI twin head card (DVI + HDMI) Non-mirrored, separate desktops However on connecting a device to the HDMI output - the DVI screen output appears to loose all panels, icons. Only the mouse pointer & desktop background remains.
I believe the output is defaulting from screen 0 to screen 1. I found a solution by creating two devices in xorg.conf and assigning one for each separate screen. BUT this created a new problem of loosing my mouse pointer. how I can get my mouse pointer working or the correct way to setup dual screens.
[URL]
View 9 Replies
View Related
Apr 24, 2011
I have use windows for a long time and now I want to get linux .
I will like a easy to use frendly GUI that supports multimedia and video editing.
One that has alot of support and works well with other software and hardware.
View 14 Replies
View Related
Apr 6, 2010
I'm using Ubuntu 9.10 (Karmic Koala) & recently added Ubuntu Studio to it. For quite some time, I'm trying to enable direct 3d acceleration on a virtual XP SP3 machine running over VMware Workststion 7.0.1.
As per VMware forums & many other sites, 3d hardware acceleration is supported for XP as guest provided that host Linux version is supported by the VMware product running that VM.
The forum also says that Ubuntu 9.10 is now supported by Workstation 7.0.1.
So: I have a supported version of host (Ubuntu 9.10) XPSP3 as guest. Latest version of VMware tools installed. Still I don't get hardware acceleration for the guest XP VM.
View 3 Replies
View Related
Dec 10, 2010
Is there a way to get Chromium to use VDPAU acceleration for HTML5 video playback? It's obviously not as cpu usage is very high.
View 1 Replies
View Related
Feb 11, 2011
i installed the new flash 10.2 (with flash-aid) and i have no acceleration on videos.i thought that maybe i had something wrong with my system, so i reinstalled ubuntu 10.10.then installed flash and the vdpau-va-driver. still nothing.i have a ion card, so i should have full flash acceleration on video, like i have in windows.
View 8 Replies
View Related
Mar 4, 2010
I'm trying to configure my Wacom tablet in Ubuntu (9.4) and it's working pretty well!
I have one issue though.
In Windows (with the Wacom drivers) I have the option to set both Mouse Speed and Mouse Acceleration (see attached screen shot). I normally like to increase acceleration and decrease speed.
In Linux (with xsetwacom) I can only find one, SpeedLevel. Is it so, or are there any other way to configure it?
View 1 Replies
View Related
Jul 23, 2011
After I installed the system (Ubuntu 10.04 64-bit), I wanted to turn the owner driver (nvidia-current) on in order to gain hardware graphics acceleration, among others 3D acceleration.When I installed this driver and restarted the computer, it appeared that the error message shows up: Code:(EE) No devices detected.No screens found.If I want to have any window based environment at all, I have to go back to the previous settings, without this driver.
The only solution I found so far on the Internet tells to turn this driver off at all, what means no 3D acceleration.Has anyone encountered this problem and found a solution? Is there any possibility to turn hardware acceleration on for this card on Ubuntu?
View 5 Replies
View Related
Nov 27, 2010
I am trying to use Skype beta on my acer aspire one with ubuntu 10.10. The video runs brilliantly and i can also here my wife from the other end but she cannot hear me. Apparently something is fishy with my mic input. I tried alsamixer and everything is in unmute. My alsa version is 1.0.23. The only think she hears is a loud hissing noise which is normally my bat voice but she doesnt need to know that. I can record my voice in the sound recorder but nothing comes out in Skype!
View 6 Replies
View Related
May 8, 2010
Today I installed the latest Ubuntu, added VLC and... the acceleration is not there. When I compiled VLC myself on 9.04 I had a checkbox to enable hardware acceleration in the FFMPEG codec settings but this checkbox is not present in the VLC that was downloaded to my 10.04 by default.am I doing something wrong or is the hardware acceleration simply not there? And what do I have to do to enable it? Is FFmpeg in 10.04 compiled with VAAPI support? Is VLC in 10.04 compiled with VAAPI support? Do I need to recompile both or just on of them? I have just updated my system and now I'm not able to watch the family movies from my HD camcorder.
View 2 Replies
View Related
Dec 12, 2010
I've tried watching material in 1080p resolution on my notebook and i experienced some slowdowns, tearing, etc. Video is encoded by x264 and sound is flac 5.1, all in mkv container. I know it's quite heavy one, but it was playing quite good on windows+CoreAVC, so i expect no less from my shiny Ubuntu I did a bit of googling and found out that AVIVO/UVD/Whatever is already turned on by default in fglrx drivers when using Xv, yet CPU is struggling on 90-100% load. Is there a way to turn hardware decoding on? It doesn't seem to work by "default" (or i'm too desperate to acknowledge that hardware acc is already on and still struggling to decode this ).
Specs of my notebook:
Intel Pentium Dual-Core T4200 2.0 GHz
Mobility Radeon HD4570 256MB with fglrx from maverick repo
3GB RAM (doh!)
mplayer and codecs from medibuntu repo
mplayer uses -vo xv -va pulse , ffh264 and ffflac codecs
View 4 Replies
View Related
Jun 7, 2011
I was looking at purchasing a radeon x1300 for a multimedia pc for my lounge and was wondering if anyone knew whether hardware video acceleration with this card was supported with ubuntu? I read that on the ati website that it does support mpeg2,4, etc video acceleration,but didn't know if this was so for ubuntu. I have a few bluray quality movies that I would be interested in playing, so hardware video acceleration is a must.
View 1 Replies
View Related
Jun 25, 2011
I'm currently running a three-monitor setup, two of the monitors being connected to an NVIDIA card, and the third being connected to the motherboard's onboard ATI adapter. This works, and it actually works quite well, but after installing the nvidia-current drivers (using the GNOME dialog), I am unable to get any video acceleration going. The GLX module doesn't seem to want to load, and while I'm actually quite impressed with the video performance I'm getting with the open-source drivers, I'd really like to have the OpenGL capability, as it does make things look prettier.
Relevant configs and logs are below.
I should clarify - I don't care about the 3rd monitor on the ATI adapter; I'm only concerned with getting OpenGL working on the two on the NVIDIA - if that's possible, which it may not be...
System:
Code:
xorg.conf:
Code:
View 3 Replies
View Related
Apr 10, 2011
I get the following error when trying to enable Hardware Acceleration in VLC:
Code:
VLC media player 1.1.7 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
Blocked: call to setlocale(6, "")
m_el[mi_level] == NULL
[Code]...
View 2 Replies
View Related
Oct 30, 2015
I've made a persistent live USB out of an amd64 Cinnamon iso, but it has problems running on my old Dell XPS Studio 16.The laptop has an ATI Mobility Radeon HD 3670, and all needed packages are installed (Xorg, libgl1-mesa-dri, xserver-xorg-video-radeon and firmware-linux-nonfree), but the system starts without video hardware acceleration.I've read that I have, in this case, to tell to use the srivers in /etc/X11/xorg.conf. To do it, I first stop lightdm and do it in tty, but it fails with a long output.how can I give you that tty output? I tried both with > and with tee, but the file I indicate as output is created empty.
View 14 Replies
View Related
Oct 19, 2010
Running Meerkat 10.10 with an ATI X1950 PRO, and with no visual enhancements I get page tearing on minimising windows and things like that.
If I turn on even basic visual effects, then Maverick slows down and becomes quite unresponsive. There are noticeably long delays between closing windows or clicking on a menu etc.
Is this because the open source ATI driver does not support hardware acceleration on my X1950 yet?
Is there any hope for me? Recent versions of Ubuntu seems to have taken a step back in that respect. I remember 8.04 worked really well!
View 6 Replies
View Related
Nov 29, 2010
there is a way to use hardware acceleration with a Nividia Gforce G 105M video card in Ubuntu.
View 5 Replies
View Related
Apr 4, 2010
So here's the schedule for 10.04:
April 8th, 2010 - Beta 2 release;
April 22nd, 2010 - Release Candidate;
April 29th, 2010 - Final release of Ubuntu 10.04 LTS.
If I have 10.04 beta 1, could I just continue to update and not have to burn another disk to install? Or do I have to burn the beta 2 and reinstall if I want it?
View 9 Replies
View Related
Mar 9, 2011
Running Squeeze, with kernel 2.6.32-5-amd64. I do not find out how to enable 3d acceleration with my Intel 945 embedded graphics card. Also having very (i mean VERY) slow scrolling in some webpages (such as apple website, or danielestulin.com website). I tested the following "Hardware Acceleration Stress Test" with Epiphany, Iceweasel and Firefox, and the best rate I get is only 3 fps...[URL].. I tested the Chess game included with default Squeeze install, running in 3d mode, and definetely there is no acceleration at all...
Here's my glxinfo output:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
[Code]...
View 13 Replies
View Related
May 24, 2011
All of the videos on tennistv are flash. The pre-recorded videos seem to play okay using iceweasel and flashplugin-nonfree but the CPU is very high. When she watches live streamed matches the video stalls and jumps, so I have been trying to figure out why. Tennistv support people say that Linux isn't supported and that streaming is "harder" but don't explain why. They suggested using Google chrome, which did seem to work as well as iceweasel but no better. In desparation I tried XP and it was much better and uses much less CPU.
The only difference I could think of was that flash video hardware acceleration works by default in XP, so I started reading up on Flash video acceleration for linux. The latest Adobe flash player releases appear to support video acceleration, but it's switched off by default. So I upgraded to the latest version and did and then restarted iceweasal if you right click on a flash video you can set hardware acceleration in a tick box, but that seems to be there whether the above is config file is there or not there isn't a live tennis match on again until June 6th. How can I tell if hardware acceleration is actually working or not? The PC is has a 3GHz CPU and 1G RAM. Seems nuts that it can't play video properly. Its a Dell SX280.
View 8 Replies
View Related
Apr 2, 2010
I'm having Asus F5RL Notebook and having ATI Radeon Xpress 1100. I can watch movie and play games in GL before this. Now everything seems very very slow after a full system upgrade. (Suspected xorg causing the problem)
I'm following the [URL]..AtiHowTo to setup my graphic card. How to remove/change software rasterizer to hardware acceleration? I'm enjoying full hardware speed before this dear experienced user
[Code]...
View 3 Replies
View Related
Aug 2, 2010
Unable to get high res, colour or 3-D acceleration working with 8.04 Hardy. Not a hardware problem as it works perfectly in dual-boot XP.
[Code]...
View 6 Replies
View Related
May 31, 2010
I am a newbie with Linux and I am eager to learn it .
I installed RHEL6 beta on My Dell D620 and everything seems to be fine except the Video Driver. I installed the Desktop and the Video card of my laptop is NVIDIA QUADRO NVS110M with the max resolution 1440x900. The max resolution I have now is 1024x768.I want to install the NVDIA driver,I already downloaded the RPMS from http://www.atrpms.net/ website but I am afraid it won't work because of dependencies..if I try to use the hard way by using rpm -Uhv.
Is there any other way for example using YUM or other ways.If I use YUM what command I have to type.
View 4 Replies
View Related
Apr 7, 2010
Does anyone know where to manually set screen resolution in the new 10.4 beta? Used to be in xorg.conf, but it appears that it doesn't exist in this release.
View 2 Replies
View Related