I have watched a couple ..... videos and read a guide online and i'm still at a loss on how to make a script. All i am trying to do is make a script i can double click to do the following in terminal vncviewer 192.168.2.2 I want to make a script my wife can click to connect to our Storage/Pritner PC.
View 3 RepliesI try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?
View 4 Replies View RelatedI just upgraded to 15 and was wondering if it was possible to specify which devices to prioritize a route through. I have my machine, a laptop, connected to my family's router for an internet connection and a wired connection to a personal router for a faster and private connection between my other two computers and a network storage device. Whenever the laptop is connected to my personal router everything goes through it and it can't connect to any external web sites. But when I unplug it and go only on my family's wireless everything is fine, except I can't connect to the storage device since it has no external connections.
View 11 Replies View Relatedhow to connect Western Digital MyBook 2TB USB external storage in ubuntu 6.10
View 2 Replies View RelatedMy goal is to connect up a bunch of CentOS 5.6 servers to storage array which is running as an SRP target. These servers will be running eventually as Xen hypervisors. I'm using Mellanox Infiniband cards and a Qlogic Infiniband switch.
OFED drivers are already installed as standard. I have done the following.
1. Base install of CentOS 5.6 X86_64
2. Installed the following packages...
openib
ibutils
srptools
infiniband-diags
opensm
[Code]...
It works perfectly and connects to the target immediately with great results. I'd just like this to happen correctly on startup.
To work around the issue I have added the line srp_daemon -e -o into the init script for opensm /etc/init.d/opensmd but it doesnt always start the srp_daemon process. Its rather hit and miss
I'd really like srp_daemon to run as a service with a proper init script but I wouldnt know how to write one. I understand that this issue has been addressed in the RHEL6 srptools package but that doesnt help me because the software I intend to use on these servers specifically requires 5.
I'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
When I go to Places -> Connect to server, or right-click Open Containing Folder in Firefox or Transmission, or pretty much anything that is suppose to open a folder - instead it opens Music Player.
View 4 Replies View RelatedI'm newish to the forum, but have been using ubuntu for the past few months.I recently upgraded from eeebuntu (a 9.04 derivative) to 10.04, and found that two finger tapping my touchpad has gone from middle click to right click, (and 3 fingers is now middle instead of right).
From what I've seen, this has been changed since 9.10, but I haven't been able to find a permanent solution yet. Most fixes have been from before and use hal, or other things that don't exist anymore. The one thing I've found does work is using xinput and the command
Code:
xinput set-prop "ETPS/2 Elantech Touchpad" "Synaptics Tap Action" 2, 3, 0, 0, 1, 2, 3
But that has to be run every time I start up, and it occasionally reverts while I'm using the computer. I've tried making a script that runs at startup, but neither adding it to the list of startup programs, or autostart folder has worked, but running the script file manually does work. I'm a bit at wits end with this, it's the only issue I've had with 10.04, and I've spent many many hours trying to get it to work (I've also tried gsynaptics and the newer version whose name escapes me right now). Hopefully there's a permanent fix out there.
About a week ago I installed some updates. What they were I don't remember. After I did that my mouse started acting up. Now about half the time when I single click it registers as a double click. Also when I click and drag to select text anywhere it'll randomly do another click screwing up that process.
So far I think the problem is when I press the left mouse button it registers the left click and then when I release, it randomly registers another left click.
The mouse itself works fine if I take it to another PC that's using windows.
OS: Ubuntu 9.10 64bit
Mouse: Microsoft Intellimouse 3.0
mouse menu different in 10.10, is there a way to make the mouse single click instead of double click?
View 2 Replies View RelatedI am trying to do the cluster storage with the Rock Cluster storage operating system . I have install the rock cluster on the main server . and I want to connect the client with the PXE boot . when I starting the client then it boot from the PXE boot into the mode of compute node. but it ask the where is to be stored the I have give the path..then server says that not able to find the directory path.
Steps:-
1) insert-ethers
2) client is started with the PXE boot.
3) it detects the dhcp .
4) At last it demand where is to be started by cd-rom, harddisk ,nfs etc.
then I started with the nfs and I have given the lanIp of server.and server is detecting the client but client is not finding the filesystem directory. into export partition directory but it is not taking path.
PATH:-
/export/rock/install it is not finding this path then it is not able to start the o/s from PXE boot..Is there any solution and manual of rock or anyother solution then u can reply to me...
Ubuntu 10.04 LTS has no immediately apparent way that I can see for changing the mouse behavior from the default double-click to single-click. There appears to be some type of kludgy, but unsatisfactory fix for this unwanted behavior in the Accessibility-option, under Mouse-Preferences.
View 5 Replies View Relatedwhere can I change the single click into a double click (because I'm a windows user (sorry!))? The mouse model does not support this.
View 4 Replies View Relatedwhen i click my mouse on something, it sometimes registers as two clicks. it doesn't happen all the time, but frequently enough to be annoying. for example, when i click a videos video to pause it, it often opens into fullscreen (which you normally click twice to do). also, in the url bar of chromium, i can't select the entire url by clicking. i now need to use ctrl+a. that's also because when i try to select the url, the highlight randomly disappears.
if i have multiple windows open, my click on the first "x" of the top-most window also closes the next window. i'm on linux mint 10. it's not really important, but it drives me crazy sometimes when my mouse doesn't work the way i want it to.
Code:
linux-uitj:/home/anisha # uname -a && cat /etc/*release
Linux linux-uitj 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64 GNU/Linux
openSUSE 11.2 (x86_64)
VERSION = 11.2
If I normally click the Trash icon either in Kmail or in Evolution more than one mail gets deleted in a sequential order! I have to press the click button extremely light to avoid this problem. I have confirmed this problem is not only with the Email clients but even with most other normal applications too. I have changed my mouse twice but the problem persists. Both were USB mice. Below I have provided log information :
Code:
linux-uitj:/home/anisha # dmesg | grep usb
[ 0.138267] usbcore: registered new interface driver usbfs
[ 0.138267] usbcore: registered new interface driver hub
[ 0.138267] usbcore: registered new device driver usb
[ 0.396952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.396956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.396958] usb usb1: Product: EHCI Host Controller
[Code]....
For some reason now when I left click slackware sees it sometimes (4 out of 5 times) as a double click. This is very frustrating? Here is a list of ps aux
Code:
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.1 0.0 824 276 ? Ss 12:39 0:01 init [4]
[code]...
After I adjust my slackware and rebooted I saw a strange "rectangle" on my desktop. Please, look at the screenshots below and tell me how I should solve this problem.
I can't move it. Right-click menu on a rectangle coincides with a right-click on desktop. It does not prevent, but very annoying.
In my top right corner I got all my Ubuntu appindicators that come with Ubuntu 11.04. I also have Dropbox, caffeine and screenlets. Problem is that I cant click on dropbox, caffeine, battery indicator, wlan or sound indicator until I first click on messages menu and slide over to appindicator that I need. When screenlets appindicator is not present there is no problem. Its the same when I had Jupiter installed.
View 1 Replies View RelatedWhen i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedI am trying to get raid 5 set up as storage. I have karmic with myth set up on primary drive and wish to just use raid 5 for storage with jfs filesystem.
View 2 Replies View RelatedI'm in the process of duplicating all the data from my existing filesystems to a new storage solution. I know it is not recommended to do so but this will be a *lot* faster then having to reinstall and reconfiguring the system from scratch...I've synchronized the filesystems using rsync, used the following command line for that:
Code:
rsync --recursive --acls --xattrs --delete --force --one-file-system --links --perms --owner --group --stats --specials --devices --human-readable / /mnt/sde1
rsync --recursive --acls --xattrs --delete --force --one-file-system --links --perms --owner --group --stats --specials --devices --[code]....
To make sure all data is mirrored properly, the next step is to boot into a live system and rerun rsync to copy any previously locked/altered files to the new storage. After moving this, I know I have to edit /etc/fstab on the new storage to make it match the proper UID for the drives. I also have to update grub and install grub into MBR of the new storage.
#lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
How to mount usb storage device in my ubuntu 10.10.
I'm now having to access a lot of data on a portable hard drive on a regular basis. The drive needs to be used with three different Windows systems, three Ubuntu machines and two slackware units. The data is backed up once per week.
I have been using Ext2IFS to access the data (stored on Ext3) from Windows but keep having problems. Obviously Ubuntu and Slack have no trouble reading or writing to the drive. Additionally, some sensitive data will be put onto the drive shortly and I would like to encrypt it.
What is the best solution here? Is NTFS reliable enough and is data access and writing reliable enough from Linux? Can I encrypt NTFS and still leave it accessible by Linux? What is the best software to encrypt the drive with (if I can) that is accessible by both Windows and Linux?
I created a dual boot on my computer with windows vista and ubuntu using the wubi ubuntu installer for windows, and my ubuntu boot is limited to 15gb of hard drive space. My hard drive in actuality has about 150gb left on it. How do I expand the amount of storage ubuntu is allowed to use?
View 6 Replies View RelatedI am getting seriously pissed off and dissappointed at the way things are handled here i bought some music from rhythmbox and after a long journey in disconnections and reconnections i finally got the files in my U1 storage ( rhythmbox still says "Transfering to ur U1 storage" in mydownloads ) now how am i supposed to download all this files??? i can't download an entire folder in web browser ( i can only do one file at a time ) and i am not able to find another way through rhythmbox or anywhere else after reading one hour of irrelevant tutorials and faqs ( i have a headahe at this time, so even if there was a way i probably would not understand it :D )
is there a way or do i just have to suffer downloading all my files one by one ???? and btw: i had to do all this on a virtual machine becuz noscript got in the way of adding my pc to the account ( w/ allowing all the servers it still blocked something) and rhythmbox crashed somewhere in the process and after restarting my pc, it kept getting stock when pressed the check out button any way that's not important i actually prefer it this way to have one dedicated virtual machine for U1 music
My friend bought a new PC, and he's duel booting Ubuntu 10.04LTS and Windows 7 Ultimate. At first I tried partitioning the hardrive using fdisk in Ubuntu, but it couldn't find hda. After looking in /dev/, there wasn't hda, or any sd* devices. I looked in gparted and used the installer afterwards and both came up with nil. I installed Windows, updated the BIOS using the utility that came with the mobo, and tried seeing if Ubuntu could detect my hardrive and it couldn't. I even turned ACPI off when booting and that didn't work either.
The motherboard is a new Gigabit with 3 PCIe slots and a USB3.0.
Can I auto-mount my storage HDD? If so how?
View 4 Replies View Relatedis there a way or terminal command to disable access to a USB storage device upon insertion given that it is not permitted?
View 5 Replies View Related[URL]
In the above link am using for the Disable for USB device. how i can re enable the USB devices.
In our school I was thinking of moving to virtual desktops for the students, that would revert to a pure state upon every log out. No changes preserved after a session. We use Google docs for office, so that works. But where can we store stuff like Inkscape drawings?As far as I can tell Google storage can't be reliably mounted yet on Ubuntufor a good cloud storage option that we can quickly log into that will give us a folder for storage online?
View 1 Replies View Related