Ubuntu :: MSI X320 10.4 / 10.10 - No Video Acceleration And Wireless
Nov 10, 2010
i have an msi x320 (damned netbook). it was working with karmic, but no video acceleration and no wireless. i decided to update to 10.04 before installing drivers for video and wireless. but all went wrong each time i boot stuck on blank screen. haged in something if i did the same in recovery mode stuck in endless:
mmc2: controller never released inhibit bit (s)
mmc2: card removed during transfer!
mmc2: reseting controller
mmc2: timeout waiting for hardware interrupt
and never get to desktop i updated to 10.04 and this happened i loaded 10.10 netbook remix onto my flash drive, and tried to load and make fresh install but no go, very same error im using my flash drive now with 9.1 netbook remix (dont like it btw) ill use 9.1 desktop later.. to reinstall its working well i end up giving up fixin 10. something ill install 9.1 but i need firs to back up the old home folder, but need to change permision to do it...
View 9 Replies
ADVERTISEMENT
Nov 6, 2010
I'm having problems with my video card (Radeon X1600) ever since I upgraded to 10.04 (video is fine until I stress the video card (eg using 3D acceleration)). This appears to be a problem with the drivers for the video card. I've had problems in the past with video cards (many because I didn't check that the card I'm buying is "Linux friendly" or not. Now I'm doing my do diligence and asking the community what video card I should buy to replace my current one? I have the following Motherboard: [URL]
View 9 Replies
View Related
Nov 12, 2010
I have an HP laptop with an ATI 4300 HD built-in. When I play avi/divx video in fullscreen, this is kinda choppy sometimes. I use the ATI proprietary driver: How do I enable hardware video acceleration for this driver?
View 5 Replies
View Related
Feb 26, 2010
Following a reinstall of debian amd64 lenny I am unable to get 3D acceleration (which was working fine before), although all checks are positive:
###########
francesco@tya64:~$ glxinfo
name of display: :0.0
display: :0 screen: 0
[code]....
View 5 Replies
View Related
May 8, 2010
Today I installed the latest Ubuntu, added VLC and... the acceleration is not there. When I compiled VLC myself on 9.04 I had a checkbox to enable hardware acceleration in the FFMPEG codec settings but this checkbox is not present in the VLC that was downloaded to my 10.04 by default.am I doing something wrong or is the hardware acceleration simply not there? And what do I have to do to enable it? Is FFmpeg in 10.04 compiled with VAAPI support? Is VLC in 10.04 compiled with VAAPI support? Do I need to recompile both or just on of them? I have just updated my system and now I'm not able to watch the family movies from my HD camcorder.
View 2 Replies
View Related
Jun 7, 2011
I was looking at purchasing a radeon x1300 for a multimedia pc for my lounge and was wondering if anyone knew whether hardware video acceleration with this card was supported with ubuntu? I read that on the ati website that it does support mpeg2,4, etc video acceleration,but didn't know if this was so for ubuntu. I have a few bluray quality movies that I would be interested in playing, so hardware video acceleration is a must.
View 1 Replies
View Related
Jun 25, 2011
I'm currently running a three-monitor setup, two of the monitors being connected to an NVIDIA card, and the third being connected to the motherboard's onboard ATI adapter. This works, and it actually works quite well, but after installing the nvidia-current drivers (using the GNOME dialog), I am unable to get any video acceleration going. The GLX module doesn't seem to want to load, and while I'm actually quite impressed with the video performance I'm getting with the open-source drivers, I'd really like to have the OpenGL capability, as it does make things look prettier.
Relevant configs and logs are below.
I should clarify - I don't care about the 3rd monitor on the ATI adapter; I'm only concerned with getting OpenGL working on the two on the NVIDIA - if that's possible, which it may not be...
System:
Code:
xorg.conf:
Code:
View 3 Replies
View Related
Mar 13, 2016
My system is a 2.0Ghz Dual Core PowerMac G5 Ram 16Gb - 2Tb HDD - It is running Jessie 8.3 [new Install] and seems stable enough.....! My system is showing the message below on boot up, but I don't know why? I have had to disable the 3D video acceleration with a Yaboot parameter "nouveau.noaccel=1' to get the system to load KDE. I am also having some bluetooth headaches (along with many other people apparently).
# systemctl systemd-modules-load.service
Unknown operation 'systemd-modules-load.service'.
root@Apple-Desktop:~# systemctl status systemd-modules-load.service
â— systemd-modules-load.service - Load Kernel Modules
[code]....
View 3 Replies
View Related
Mar 13, 2010
I installed Lenny on my HP/Compaq nx6125 (the Sempron 32 bit model). Although X is running OK, I can't get video acceleration working. Games like Nexuiz are unusable, and programs like Stellarium and Google Earth simply fail to load. i attached some information below.
Currently, I had the free radeon driver installed. The non-free fglxr drivers are available, but I read that they do not support old chipsets like the 200M. I would like to know some pointers or instructions on how to get acceleration working. Most of the information I read seems to be outdated.
tommy@tardis:~$ glxgears -info
Warning, xpress200 detected.
GL_RENDERER = Mesa DRI R300 20060815 x86/MMX+/3DNow!+/SSE2 NO-TCL
GL_VERSION = 1.3 Mesa 7.0.4
[code]....
View 1 Replies
View Related
Mar 4, 2010
opensuse v11.2, linux 2.6.31.12-0.1-desktop x86_64
ati radeon hd3200 (built into motherboard)
gnome desktop
The video acceleration is clearly not enabled since I can practically watch each pixel drawn. (Well, a bit hyperbolic, but really slow.) Another system, same hardware, had this slow video problem and at one point required a complete OS re-installation. The slow video refresh went away. So there is some way to configure the graphics+display to enable acceleration at install time.
View 4 Replies
View Related
Nov 29, 2010
there is a way to use hardware acceleration with a Nividia Gforce G 105M video card in Ubuntu.
View 5 Replies
View Related
May 24, 2011
All of the videos on tennistv are flash. The pre-recorded videos seem to play okay using iceweasel and flashplugin-nonfree but the CPU is very high. When she watches live streamed matches the video stalls and jumps, so I have been trying to figure out why. Tennistv support people say that Linux isn't supported and that streaming is "harder" but don't explain why. They suggested using Google chrome, which did seem to work as well as iceweasel but no better. In desparation I tried XP and it was much better and uses much less CPU.
The only difference I could think of was that flash video hardware acceleration works by default in XP, so I started reading up on Flash video acceleration for linux. The latest Adobe flash player releases appear to support video acceleration, but it's switched off by default. So I upgraded to the latest version and did and then restarted iceweasal if you right click on a flash video you can set hardware acceleration in a tick box, but that seems to be there whether the above is config file is there or not there isn't a live tennis match on again until June 6th. How can I tell if hardware acceleration is actually working or not? The PC is has a 3GHz CPU and 1G RAM. Seems nuts that it can't play video properly. Its a Dell SX280.
View 8 Replies
View Related
Nov 14, 2010
While installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
View 5 Replies
View Related
Sep 4, 2009
I thought this may be of interest, so I'm sharing. I've built some experimental mplayer packages for Fedora 11 and Rawhide (x86-32 and x86-64 arches) with shiny new features. Aside from being very recent snapshots, one of them includes support for hardware video playback acceleration via VDPAU and VAAPI, and the other includes support for multi-threaded playback (so you can split the decoding load across multiple cores).
The playback acceleration can definitely be used on NVIDIA adapters (from the GeForce 8xxx series onwards) using the proprietary driver (not, unfortunately, nouveau). Also on Intel Poulsbo (GMA 500) adapters, using my packaged version of the native driver for that chipset (link is in the blog post). VDPAU acceleration is also allegedly possible on S3 Chrome 530 GT and S3 Chrome 540 GTX adapters using S3�s own driver, but I haven't had the chance to test that. Multi-threaded playback can be done on any system, but only really makes sense on those with multiple processors (cores).
Full details of where, how and why are in my blog post:[URL]..
View 14 Replies
View Related
Jun 5, 2011
I am in the process of building a new desktop machine for work and fun. I am looking to run a undecided flavor of Linux (guessing Ubuntu) as my primary OS and several Windows installs with a Windows 7 install for .net development and gaming as virtualized environments.
From my previous experiences with virtualization software in Linux I was never able to find an application that offered descent video card support / graphic acceleration etc. to be capable of playing any games within one of the virtualized environments. And since I will be investing quite a bit of money into this system for gaming I would naturally want to find the best option available to achieve this setup.
So Onto my question: Is there any virtualization software available for Linux that has full video card support, graphic acceleration and capable of taking advantage of everything the video cards have to offer within the virtualized environments?
Or am I stuck with running Windows 7 as my primary OS and using virtualization for Linux and the other OS's?
Also I have no preference on open/closed source and price range would be up to $175.00 to support at least 3 virtualized environments.
View 4 Replies
View Related
Apr 2, 2011
I just had to have my MacBook Pro 5,5 replaced, and they replaced it with the brand new 8,1. This is nice, except for the fact that I have now learned that I can't get the video or wireless drivers for this computer. I do not have any access to ethernet, and USB internet does not seem to work. Right now I have Ubuntu 10.04 32bit installed. The installation went fine, but I can't get any drivers. Is there any fix for this? Here are the specs for this laptop:
Intel i5 Sandy Bridge 2.3GHz
320Gig HDD partitioned
Intel HD Graphics 3000 GPU
Airport Extreme Broadcom BCM43xx
-NetXtreme BCM57765
-Broadcam Corporation Device 4331
Perhaps there's another distro I can use, or maybe another release that works somewhat?
View 2 Replies
View Related
Feb 15, 2010
Are there any tricks to get video to play smoother in firefox on my wireless network?memory dump or config?They play smoother in xp, which could be just better hardware, or not.
View 1 Replies
View Related
Jul 28, 2010
i noticed that some of the games i want to play do not run well on my system. and i looked somewhere and heard someone say that if hardware acceleration is not enabled then it will not run well...
my graphics are by intel
965 express chipset family (aka X3100)
and everything i came across didnt really help my particular display driver or graphics maker.
View 3 Replies
View Related
Feb 4, 2010
I am looking for a download manager with acceleration, pause/resume support and browser integration with firefox or konqueror. And the ability to easily download embedded videos would be a plus.
Internet Download Manager is the ideal for me in Windows.
View 2 Replies
View Related
May 4, 2010
i've installed playonlinux on my system ubuntu 10.04 , and it says that 3d acceleration aren't enabled , how can i do that , this is the output of : lspci | grep VGA VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
View 4 Replies
View Related
Jul 5, 2010
Is it true that there is no browser flash hardware acceleration available for ubuntu from adobe yet?
View 3 Replies
View Related
Dec 22, 2010
I'm using ubuntu. Is it possible to set the mouse acceleration/sensitivity to a value beyond the maximum that is available through System->preferences->mouse ?
View 4 Replies
View Related
Mar 19, 2011
i think i just got the reason why my ubuntu 10.04 live DVD crashes. i can be due to hardware acceleration if its set to that by default. so how do i turn on software acceleration? some command or something?
View 1 Replies
View Related
Apr 28, 2011
I'm running Ubuntu 11.04 Natty on a MSI E350IA-E45 with the AMD/ATI Zacate chipset, and I'm not being able to get hardware accelerated graphics working. I tried installing and activating FGLRX, but it doesn't seem to have solved anything. There is no hardware acceleration as far as I can tell, and XBMC complains that there's no OpenGL support. If there's some other way to activate hardware acceleration, I don't know where it is. I looked around Catalyst, but couldn't find any mention of OpenGL or any way to "turn on" hardware acceleration. Then I tried removing FGLRX and reinstalling the xserver-xorg-video-ati drivers as per [URL] , but got a black screen on reboot. Went into the recovery mode, reinstalled FGLRX, and am pretty much back where I started (with a GUI but no hardware acceleration), with no how to proceed from here. I'm especially confused because, from what I have read, the Zacate seems to get along with Natty out of the box for most people.
View 4 Replies
View Related
Aug 17, 2011
i'm currently running Ubuntu 11.04.Heres my problem. Everytime i try to run Compiz and apply some of the fantastic effects none of them seem to work. So this tells me that something is either wrong with my graphics driver (because upon a clean install of Ubuntu it says i don't have a graphics card that can supoort Unity) or i've just simply missed a step in adding one.I've checked Nvidia X server only to get the message "You do not appear to be using the NVIDIA X driver Please edit your x configuration file (just run `nvidia-xconfig as root)" I would love to run it in root if (and don't laugh) i only knew how :
From the many commands i've found online i've tired to either get to or find xorg.conf and if i'm mistaken doesn't exist for some reason. In a nutshell. I can't enable 3d acceleration, i can't find xorg.conf.I currently have 325m Nvidia card on my laptop, if it helps : I can give a ton of other information in necessary.
View 9 Replies
View Related
Nov 5, 2010
Out of curiosity, in linux, how do we check:
- The make/type of ethernet card
- The wireless chipset
- The video card
Used in a computer?
View 3 Replies
View Related
Dec 2, 2009
i run Fedora 12 64bit with nVidia 9300M GS. I have one question, nouveau is still running only with 2D acceleration or there is a way to run with 3D acceleration?
View 2 Replies
View Related
Mar 18, 2011
This is the Linux version of my Disabling mouse acceleration in Mac OS X question. Hopefully I'll get an answer this time.I am tired of mouse acceleration and want to have a completely linear mouse response. This is easily achievable through any of the 5 or so methods (some subtly implied) on the X.Org wiki page on pointer acceleration. However, they also disable velocity scaling.I don't want a 1:1 mapping between device and screen coordinates. I want a 1:N mapping where N is a constant.
View 1 Replies
View Related
Apr 6, 2010
I'm using Ubuntu 9.10 (Karmic Koala) & recently added Ubuntu Studio to it. For quite some time, I'm trying to enable direct 3d acceleration on a virtual XP SP3 machine running over VMware Workststion 7.0.1.
As per VMware forums & many other sites, 3d hardware acceleration is supported for XP as guest provided that host Linux version is supported by the VMware product running that VM.
The forum also says that Ubuntu 9.10 is now supported by Workstation 7.0.1.
So: I have a supported version of host (Ubuntu 9.10) XPSP3 as guest. Latest version of VMware tools installed. Still I don't get hardware acceleration for the guest XP VM.
View 3 Replies
View Related
Jun 20, 2010
I have a nvidia Geforce 8500 on my 10.04 system - the driver I'm using is: NVIDIA accelerated graphics driver (version current) [Recommended]. When I look at System/Preferences/Monitors I am asked if I want to use the vendor's graphics tool and up pops the NVIDIA X Server Settings window. How do I enable 3D acceleration?
View 2 Replies
View Related
