I uninstalled the email portion of Ubuntu and rebooted the make sure that everything was good. Ubuntu came back to the login splash screen-I selected my login and entered my Correct password-Ubuntu splashed up screen writting (Unable to read as its to quick) and Ubuntu then returns to the login screen. Incidently when I enter an incorrect password Ubuntu tells me that it is incorrect but with my correct password it just returns to the login splash screen.
I just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
I've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
Not sure how to do this on 9.10. After upgrading I noticed that the login screen is displying the users of the machine; however, I want to login screen to ask for username and password, without showing the users.
Is there a way to get the login screen to disable the saved users? Or a way to make the login screen ask for username and password?
I may be a beginner to Ubuntu 10.10, but I'm fairly certain that this is weird: I have had no trouble logging into my Ubuntu 10.10 netbook until this morning. Now I am unable to get past the login screen. It says that there is an Authentication Failure, which is bogus. Not only should the password work, but it does in the Terminal. I am able to login to the terminal and gain root access.
I can even change my unix password, but no matter what I try I can't get to my desktop. I did run into a major issue with a frozen program. Rather than reboot, I tried to close it using the kill command. What ended up happening was that all that remained was my wallpaper, probably a bad move on my part, but I'm a rookie. I think I killed all running applications. This happened last night... so probably related.
I installed Xubuntu 10.04 on my Dell laptop earlier, and all went well until I tried to finally login. A dull black screen is presented (I don't know if that's normal; I expected a pleasant splash screen haha). As a windows user, I can only explain it as looking like a command prompt. The first line asks me for my login (which is my first name). I type it in, press enter, and then it asks me for my password. The problem is, no matter what I press, nothing happens after that.
I have problem with login to Fedora 14. After I type my password is show Fedora 14 screen but It stop doing anything it show only Fedora 14 Picture background.
The login screen does not accept the password for users. Only the password for Root. The problem is not in the command line, but check the password in the screen. I have tried to change the password from the root and it is still the problem. What I can do?
I can't login after the password-protect-screen-saver comes on during a download.The screen is black, the cursor arrow moves with the mouse, but no login window.I have no idea what is wrong but it seems to correlate with this combination.
When I boot Ubuntu 10.04 then at first the login screen appears with the main user
"Peter" and "other..."
In 99% of the cases I use "Peter" and have explicitely to click on Peter. Only then the password entry field appears and I can enter it.
This is somehow user unfriendly. Can I define somehow a default user (here: Peter) and show immediately the password entry field (and place the cursor inside)?
We've just installed debian xfce lxde....after all this time to get it....when we boot up to the login screen it keeps saying wrong uder name or password
I have just bought a PC with SUSE 10.1-0. The first time I started the PC an installation menu appeared. I didn't define a user name, thinking that it should log in automatically (as in Windows occurs), but now I can't go farther from the Welcome screen, due to the system is asking me de user and password, but I didn't introduce nothing! Leaving username and password in blank didn't solve the matter.
I can see the admin screen (pressing F10) but I am not able to find any user to log (logically) and I can't include new users from there.
I have also tried to install Windows XP modifying the BIOS but the system returns a message (once in the WinXP installation program) about an error called 4096, about the file i386halaacpi.dll, which is unable to find (something about the HAL), so I am afraid that my (new) RAM memory is damaged.
What could I do? The system is for an old person, so I would like to install finally WinXP and delete Suse.
I just downloaded Debian's live CD .iso file. I put it on a USB stick and booted from it. It loads everything then presents me a login screen. I have no idea what the login and password is I've looked all over google and people said it was user: live pass: live or something like that. I've tried a lot of different combinations with no luck. So does anyone know the real username and password for this?
It happens like 50% of my Suse 11.2 startups, when I type in my password at login screen and hit enter, Gnome do not start, i can only see the green blank screen,or sometimes it start to show only my custom wallpaper and nothing more, when i try ctrl+alt+backspacex2 and login again everything seems to work fine, but what could be wrong ? is it a hardware issue ? Moreover, sometimes when I want to shutdown my laptop and click the shutdown button, suse do logout, but instead of turning off the laptop , it brings me to login screen, clicking the shutdown button at login screen makes my hdd lamp blink and thats all.
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
I thought these were the same password?In-fact, they WERE the same password on the set-up I currently have.But now, weirdly, I can log in fine but I the exact same password is not using in order to perform admin tasks.I've tried a recovery mode, console, and then "password (username)" in order to reset the password.This does reset the password I need to use to log in, but the password still does not work for performing admin tasks
i changed my password and whenever i log in i get a message that ur login keyring password and user password do not match, so how do i change my login keyring password!!
everytime i try to vnc to my box, it pops up the keyring authentication, which is obviously a huge problem when logging in remotely.how do i change my keyring password to match my login password?
I have a brand new install.I was doing some housekeeping and made a more sure password.Something went wonky and I got locked out.So I booted to root and changed the password.I'm back in the box now.But, my keyring password no longer matches my user password.So every time I want to do something I am asked for my old password.How do I change my keyring password to match my login password?
I have built a linux image based on kernel 2.6.32.10. The image boots up fine & at the login prompt when I enter the login Id - the system doesnt prompt for password - instead throws an error message "Login incorrect".
From all the search I did, I narrowed this down to be a pam configuration issue. I checked that the /etc/securetty has an entry "/dev/ttyS0" to allow root to logon via serial console - so I ruled out this file to be a cause for that error. Few files that I am not entirely sure are as below:
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100% devtmpfs Use% is 1% tmpfs Use% is 1% /dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
I needed to use Synaptic Package Manager to install an app, but the dialog box ("enter the Administrative Password") that pops up before you can use Synaptic doesn't recognize my password ("incorrect password). I tried typing it into a text editor and it's spelled right, caps lock not turned on or anything.
In Terminal, sudo recognizes it, and it is recognized when I log into Ubuntu. I'm the sole user, I have admin privileges, I've been doing admin things.
I just now did System > Administration > Users and Groups and got a dialog box saying
"Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Server ping error: IDLmg.org/CORBA/COMM_FAILURE:1.0)"
Moving past that, I changed my user password, and Ubuntu authenticated it.
How do you launch Synaptic Package Manager from the command line?
I have centos 5.3 i got the login screen but after logging shows error as-- your session only last less than 10 seconds . if you have not logged out yourself tyhis could mean that there is some installation problem or that you may out of disk space .try logging with one of fail session.
I just finished installing 10.10 on my pc. the problem is that i cant login to the desktop i enter the password, the login sound plays and im stuck looking at the wallpaper. nothing else. i tried logging in safe mode and it worked. how can i get it to work normally?
pc specs: Pentium 4 2.6 ghz 512mb ram ati radeon 9600 graphics card
I am an absolute Linux Beginner who is being required to do a bit of admin work because the boss just fired the old linux admin. Unfortunately, one of our employees cannot remember her password to her email account and as such I need to reset it on our linux server.What I want to check is that this email account is actually a linux user account and I simply will reset the password for it using the passwd command from the root login. Is that correct?
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
I work on a product that have to start automatically an application. Running Opensuse 11.2 So in the inittab I have : 1:2345:once:/root/Velox/VeloxBoot.sh 2:2345:respawn:/sbin/mingetty tty2
In the VeloxBoot.sh, if I don't press any key, my application starts after a timeout. If the user presses a key I want to have a login prompt. Unfortunately, if I start /bin/login, I have a prompt with login, but once I enter my login, it does not ask for a password and it says wrong password
I just updated to 10.10 (), but I have one problem. I changed my password a few days ago, and now whenever I log on, It comes up with the attached message, and I have to type in my OLD password to connect to wireless.
