My Vista booting files are busted.
Windows Boot Manager says: ...winload.exe missing or corrupted.
Have read an article saying that Ubuntu Live CD can restore winload.exe or MBR.
I am an apprentice and unable to carry out such a complicated task.
Ubuntu Live CD 8.10 or 9.04 is on hand.
I've done a good few ubuntu installations for friends and colleagues and now my Dad wants in on the action. His PC is more than capable of running ubuntu 32 bit BUT I've hit a brick wall I've never come across before. I've burnt a CD image of the 10.04 iso from [URL] on my ubuntu box and for some reason, his PC just won't boot from it. If I select the option to manually select the boot source, all I see is the hardware monitor telling me things like CPU temperature. As for the Live USB - nothing whatsoever. Is it possible that I've managed to corrupt the iso file somehow?
View 3 Replies View RelatedI installed Ubuntu to dual boot with Vista that came with my Dell Inspiron 1420. Dell had a partition where the Vista install could be restored to factory state when the laptop was purchased.
After installing Ubuntu, I see:
I think the /dev/sda5 partition was the one that contains the Vista system restore information. And according to Dell documentation, I need to the F8 key at BIOS load time to make the laptop boot the restore partition.
However after the Ubuntu install, I cannot get the Factory Restore to start by pressing the F8. It worked before the Ubuntu install.
How to get to my state before I installed Vista. I want to be able to restore the laptop to the state before I installed Ubuntu.
I've restored NTFS containing Windows Vista. But the bootloader or bootsector got corrupted.
How can i detect what of them got corrupted?
How can i restore bootloader if it's corrupted?
How can i repair bootsector if it's corrupted?
All of these things should be done from linux or from bootable CD.
Can I restore grub1 with a ubuntu 11.04 live cd?
if yes how, cause "sudo grub" doesn't work
or can i use grub 2 for fedora 12 and windows 7? i think i recall that fedora would need a chainloader and it's own grub1 but that's the one that's broken
HSo basically i'm trying to run the ubuntu live cd from vista and it doesn't boot up when i restart my computer like it says it should. So i tried finding it in the boot list before windows starts and i only find windows there, no CD. I then tried installing the software that comes on the disk to help if the cd won't boot, and that fails when nearly done giving me some "invalid argument" notice..
View 5 Replies View RelatedAfter upgrading from 9.10 to 10.4 computer stop working. Booting stops on grub with a massage:
Code:
Grub loading.
Error: the symbol 'grub_puts_' not found
grub rescure>
I try to restore grub but after command:
Code:
insmod /boot/grub/linux.mod
I get error:
Code:
Error: the symbol 'grub_puts_' not found
Is any way to restore grub without Live CD ?
how I restore dead mouse and keyboard input from the live cd. Basically what happened was I was updating the machine and decided to let them run in the background while my sister's 6 year old son played some tux computer games, when he was finished he switched the entire computer off at the power button and it was still updating in the background. Now there is no mouse or keyboard input, I cannot get into the recovery console, nor can I control a terminal from the login screen in order to successfully complete the update. This means basically the only option to fix it would be to re-install or fix the human user interface device drivers (keyboard and mouse) via the live cd, I am in need of some advice or instructions on how to go about fixing this issue.
View 5 Replies View RelatedSo I decided to try Ubuntu from a live USB drive 10.04 LTS on my Toshiba laptop as the windows Vista SP2 was running really slow. I liked it and clicked on the install icon. From there I set it for duel boot and off it went. The install worked great. I then downloaded the startup manager and changed the start up to be default of windows loader. Now when it boots into windows it goes to the windows recovery thing and won't start windows.
View 9 Replies View RelatedSo i'm VERY new at this, i need fedora for this research i'm starting. I have a dell and vista was installed on it, then i installed fedora 10 like it said on the fedora site from a boot disc. Now i have fedora but i don't have vista nor access to the memory it took up. I tried to restore to start over but i can't, and i need vista back.
Normally i would restore from the 10 G partition dell sets up for recovery but i'm not able to get to it, and i don't have my vista discs they're back at school.
What do i do?
I plan on creating a backup of my Windows installation using DriveImage XML (unless you have a better idea ) then wiping my hard drive clean, creating a new partition for the backup install to live, and then installing Ubuntu on another partition. Is there a method of restoring my Windows backup to partition 1 by using the live cd? Then of course I can install ubuntu to partition 2.
View 2 Replies View RelatedI have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies View RelatedI installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
View 6 Replies View Relatedare there any sweeper / cleaner apps which can take back my installation as to when it was new. I know home directory could have config files etc..but that doesnt matter, i want all packages and applications reset to how it was when i had a clean install. I am using Natty
View 2 Replies View RelatedI am trying to boot up Vista Home Premium from USB since my internal (bootable) CD-RW drive has failed and I cannot boot up Vista from CD.
I have Ubuntu running in the Windows partition and all my windows files are in there so I don't want to do a full installation of Ubuntu (yet).
I formatted an 8GB USB stick into two partitions
I then copied over to /dev/sdb1 all files from a Vista CD using an external CD-RW drive (which is not recognised as bootable on USB port).
In my Dell BIOS settings I changed the boot sequence to be bootable from USB disk first.
then I tried to reboot Vista installation in the USB stick.
But I get this message ..."this is not a bootable disk .. insert a bootable floppy"
So I could not boot up the Vista installation files.
When the boot flag is "on" in a GParted created partition does this make the partition DOS bootable for Vista installation?
My question is - What utility in Ubuntu 10.10 can create a DOS bootable partition on a USB stick? It seems that the MBR might have been overwritten when I installed Grub 2.0.
I can Grub dual boot between Windows and Ubuntu but I can't get very far with Windows .. stalls in safe mode.
So a Vista repair is called for. I would prefer not to reinstall Vista afresh at this stage.
There is a thread here explaining how to repair Vista bootloader
[url]
But it assumes that I am able to boot from CD-RW drive.
what could this bei saved my correct iptables file @ Code: /etc/iptables.up.ruleswhere webmin is looking for it.webmin config is to automaticly boot this file and addes a line at.
Code:
/etc/network/interfaces
file
[code]...
i have recently started my masters degree program and i have to install fedora 11 for one of my courses. The problem is when i try to install fedora 11 on my laptop, it wipes out my windows vista installation. I want to keep vista. I have a sony vaio laptop model VGN-FW340D. 4GB RAM and 400 GB HD. i first shrink my hard drive to free up around 100 GB. Then i run fedora 11 DVD and let it make the partitions on my free space.. I have tried everything.. I chose use free space the first time, but i didnt work, it wiped out my vista, next time i chose custom layout and defined boot, root and swap partitions , but again it wiped out my vista.. I have read many guides to dual boot vista and fedora and have carried them out step by step, but nothing works.... Also i dont have vista installation DVD, i just have the recovery CDs, so everytime it wipes out my vista, i have to do system recovery, ive been trying for a week now, and its driving me crazy, i asked a friend of mine to help me out, he has dual boot system, and he tried it and it did the same thing, wiped out my vista... i just have one drive C: with two partitions, one small partitions which contains recovery files, and the rest of the partition has vista.......
View 7 Replies View Relatedi was follow a tutorial how to change show desktop to minimize all windows
can any body help me how to restore it to default ?
After a reinstall of 10.10, I am able to turn on file sharing and so I set up a shared folder.
Windows Vista can see this folder but in my network place, there is only one icon, and it's a "Windows Network" icon. Upon clicking on that, I can see the local network, "Rompus Room".
When I click on Rompus Room, nothing happens for a while, then I get a message saying, "Opening "ROMPUS ROOM". Then I get the final message, "Unable to mount location", followed by, "Failed to retieve share list from server"
Live CD: I dowloaded the ISO, burned it to CD, booted from this CD. It starts to load and I can see the purple background with the loading icons. Everything seems normal. But instead of ending up with the login screen, it ends up with a screen that says 'Please remove all bootup media and hit ENTER' or something like this. So I hit enter and then it shuts off my computer. That's it.
Live Stick: So I tried another option and created a stick with 'usb-creator.exe' that is on the CD. Then I start from that stick, but all I end up is a line of 'Syslinux bla bla copyright 20xx-2011'. That's it. Then it does nothing anymore. The cursor is blinking, but no prompt or whatsoever and keyboard input doesn't do anything.
Now something weird: When I insert Live CD and Live Stick at the same time and then boot my computer, then it boots into Ubuntu. Obviously it loads the first parts from CD and then the rest from stick. Because when I'm then in Ubuntu and try to format the stick, it says it can't do so, because there's system files from that stick in use.
I can't seem to find this anywhere. I have burned Debian 5.06 for i386 and trying to login when running the live cd. What is the username and password to get in?
edit....
I found 'user' and 'live' but they don't work.
I need aufs support/patch for kernel 2.6.34.1 as i i need to create a live linux distro for my organization and linux live scripts (the scripts which I am using for creating live linux distro) require aufs and squashfs support. There is a directive for squashfs in kernel configuration file but nothing for aufs and the patch available at linux-live site seems not to work.
View 14 Replies View RelatedHowto create USB Live image using live-helper under Lenny?
View 1 Replies View RelatedI just downloaded OpenSuse 11.1 64 bit live cd from it's official site.I have live usb creater in my xp box , with the help of which I successfully created live USB for fedora 11 earlier. Now the problem is whenever I try to create live usb using Opensuse live ISO image after extracting all files to usb , it gets failed.The same thing is happening with OpenSolaris 11 live cd iso image. Does this mean that live usb creater I have, was only foe Fedora distros?
View 4 Replies View RelatedI recently booted into linux from 9.10 and upgraded to 10.04. i was running a vista dual boot with 9.10 and everything worked fine. When linux asked where to install grub it said "if you dont know check all partitions "or something.so i did. i tried to boot back into windows and now it wont work, all i get is a blinking cursor.
View 9 Replies View Relatedi am wondering if i should get a fedora live cd or live dvd. space isn't a problem for me
View 1 Replies View RelatedI've got an old iMac g3 on which I'd like to install Ubuntu Dapper Drake.Here's the problem:I insert the disk in the computer.Keep pressing "C" till this comes out:Quote:"The default option is "live" bla bla bla but in case of problems use "Live video=ofonly"I write "Live".The orange progress bar appears, but the the screen becomes black.I still can hear sounds: the classic ubuntu log-in music, but I can not see anything: I guess the live has started, but the screen is just black.By pressing CTRL-ALT-BACKSPACE I'm able to come back to shell.
Once rebooted, I try "Live video=ofonly".Again the orange progress bar, but then this message comes outQuote:"Failed to start the X Server, It is likely that is not set up correctly. Would you like to view the server output to diagnose the problem?"Even if I dont select anything, some random words appear in the screen, too fast for me to read them.Then I'm back to shell.I read here (that the problem is caused by Xorg and that the solution can but editing his configuration by using Quote:sudo nano /etc/X11/xorg.confBut I just don't know when to do that: Ubuntu is not installed yet and there is only MacOS 9.2 on that machine.
Just got back to attempting to play with 10.04 using its Live CD. It consistently goes to the "Log In" page and not the Live CD page on running. I saw a Post specifying a F key to be pressed on boot-up to get to the desired starting point some time ago, but did not write it down. Some advice did say press Any Key but this does not seem to do the job. Tried to use the search function here but no joy. Can anyone remember which F key? Note that as a check, I tried to use 9.10 Live CD and this worked fine, so it is not a machine problem.
View 2 Replies View Relatedi am wondering if i should get a fedora live cd or live dvd. space isn't a problem for me
View 2 Replies View RelatedI've been doing a bit of customization on my ubuntu install and have added "auth required pam_fprint.so" to my pam.d file in order to allow fingerprint recognition upon boot. After rebooting, I discovered that my fingerprint reader no longer functions (I get the message "Module is Unknown"). I was wondering how I could remove those lines from the common-auth file. I have tried booting a live CD and typing "gksudo gedit mnt/etc/pam.d/common-auth", but when I try to save, I get the error "Could not find the file /home/ubuntu/mnt/etc/pam.d/common-auth."
View 2 Replies View Related
